Stylish big tower, with tempered glass, up to ten fans, space for radiators up to 360 mm, motherboards up to E-ATX, GPU up to 440 mm, and CPU up to 175 mm, up to four drives possible, dual-chamber design
Darkflash DS900WS ATX computer case without fans (White)The Darkflash DS900WS ATX (Advanced Technology eXtended, a standard motherboard format) is a spacious midi tower case that supports ATX, M-ATX (Micro Advanced Technology eXtended, a smaller motherboard format) and ITX (Information Technology eXtended, a compact motherboard format) motherboards, and its interior will accommodate a graphics card up to 425 mm in length and CPU cooling up to 170 mm in height. The case allows the installation of up to 12 120 mm fans and water cooling. This makes the DS900WS ATX suitable for both gaming sets and heavy-duty computers. The tempered glass side panel allows you to expose the computer's interior, and the presence of 7 PCI-E (Peripheral Component Interconnect Express, an interface for expansion cards) slots and space for 4 drives (2x HDD, 2x SSD) gives you ample room for expansion.Compatibility and mounting spaceThe case supports ATX, Micro ATX and ITX format motherboards, with the power supply mounted at the bottom as standard. Inside, you'll find space for two 3.5" HDDs (Hard Disk Drives) and two 2.5" SSDs (Solid State Drives) - giving you ample space for data, system and games. The user can install a graphics card up to 425 mm long and a CPU cooler up to 170 mm high. There are also 7 PCI-E slots, making it easy to expand the kit with additional cards.Advanced cooling systemThe Darkflash DS900WS ATX offers extremely extensive cooling capabilities. The chassis can accommodate up to 12 120 mm fans, allowing for effective temperature management even under intense load. It is also possible to mount water cooling - up to 240 mm in the front and up to 360 mm on the top. In addition, the rear panel of the case features a large steel ventilation mesh for effective heat dissipation.Practical portsThe top panel features all the necessary connectors: one USB 3.0 (Universal Serial Bus 3.0, a high-speed data transfer connector), two USB 2.0 ports, and an HD (High Definition Audio) audio connector for headphones and microphone. In addition, there is a power and reset button, making it easier to use the computer on a daily basis. The whole thing is designed for convenience and quick access to the most important functions.Durable construction and thoughtful interiorThe case is made of 0.5 mm SPCC (Steel, Plate, Cold Rolled, Commercial Quality - cold rolled structural steel), which ensures stability and resistance to damage. Its dimensions are 470 x 218 x 454 mm, making it compact, but still very roomy. The interior is designed in a way that makes it easier to mount components and run cables, resulting in better airflow and a more organized look. In addition, part of the right panel is made of metal mesh, which not only protects the hardware from dust, but also helps air circulation. On the other hand, the top and bottom parts of the case made of mesh further promote ventilation, and their magnetic design ensures quick and convenient installation/removal.Tempered glass and stylish designThe left side of the case features a tempered glass panel to expose the computer's interior - including fan backlighting and components. An additional wood-style accent on the front adds a subtle but original touch. ManufacturerDarkflashModelDS900WS ATXHousing typeMidi TowerSide panelTempered glassMotherboard standardATX / M-ATX / ITXPower supply standardBottom side, ATXSlots for internal drives3.5" HDD x2 / 2.5" SSD x2Expansion card slots7Max graphics card lengthHorizontal mounting: 425 mmMax CPU cooling height170 mmMax number of fans12Fan mounting optionsRear: 1x 120 mm; Top: 3x 120 mm / 2x 140 mm; Side: 2x 120 mm; Bottom: 3x 120 mm; Front: x3 120 mmWater cooling mounting optionsTop: 360 mm / 240 mm; Front: 240 mmNumber of fans installedNo fans installedType of fansINF24TButtons and controlsPower, ResetConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorWhiteHeight454 mmWidth218 mmDepth470 mm
Darkflash DS900 Mesh fanless computer case (Black)The Darkflash DS900 Mesh is an ATX (Advanced Technology eXtended, a standard for the size of a motherboard and computer case) case that offers great customization possibilities. It supports the installation of up to 12 fans and cooling of up to 360 mm, effectively reducing the temperature of even the most loaded kit. The spacious interior accommodates large GPUs (Graphics Processing Unit, the graphics card) and tall CPU (Central Processing Unit, the processor) coolers, while the side panel with quick release and the top I/O panel with a USB 3.0 port (Universal Serial Bus, a connector standard used for connecting and charging devices, as well as transferring data) make everyday use easy. The chassis looks sleek and modern, and the mesh back panel ensures quieter and more efficient operation. It's a solid base for an expanded kit - both for gaming and work.Mesh panel - more air, better coolingOne of the main features of the DS900 Mesh chassis is the mesh front panel, which provides very good airflow to the interior. Combined with the side air ducts, it improves circulation and supports the maintenance of low temperatures even when the system is fully loaded. Although the chassis does not include fans from the factory, the design allows the installation of up to 12 120mm fans, giving you full control over cooling. The chassis also supports water cooling - it will accommodate up to 240mm cooling on the front and up to 360mm on the top.Thoughtful rear panel designThe rear panel of the case has not been overlooked. It uses a large steel ventilation mesh, which improves air circulation and protects components, while reducing noise by up to 10%. Such a design also improves cooling efficiency by 15% compared to traditional solutions, which is noticeable with intensive use of the computer.Spacious interior and easy expansionThe Darkflash DS900 Mesh gives you a lot of freedom in mounting components. Inside you can fit a graphics card up to 425 mm long and a CPU cooling up to 170 mm high. With 7 PCI (Peripheral Component Interconnect, a type of connector used to connect expansion cards) slots, it is possible to install larger graphics cards or additional expansion cards. The chassis design itself (470 × 218 × 454 mm) allows for seamless installation of ATX, micro-ATX (Micro Advanced Technology eXtended, a motherboard size standard smaller than the standard ATX) and ITX (Information Technology eXtended, a very compact motherboard standard) motherboards.Convenience of use and easy access to the interiorThe tempered glass side panel opens on a hinge and features a quick release. This allows you to quickly access the interior without having to unscrew screws, which greatly facilitates servicing, upgrades and presentation of the built kit. Inside, you'll also find cable grommets with rubber covers, which help to aesthetically guide cables and increase safety of use.Modern I/O panel and tidinessThe top of the case features a clean, organized panel with the most important connectors. Among other things, there is a USB 3.0 port for fast data transfer and convenient charging of mobile devices. This layout ensures that access to ports is always quick and convenient, no matter where your case is located.Tailored to the gaming workstationA uniform color scheme and a simple yet modernistic design make the DS900 Mesh fit well with both a gaming setup and a more minimalist office. The transparent side panel allows to expose the interior, which will be appreciated by users who focus on aesthetics and order inside the case.Includedmotherboard screws x18power supply screws x6hard drive screws x9copper post x3 (6 pieces installed)fan coverclamp x5fan screws x12copper spacerHD audio support x2USB cap x3USB cap x2Type-C capuser manual ManufacturerDarkFlashModelDS900 MeshHousing typeMidi TowerSide panelTempered glassMotherboard standardATX, M-ATX, ITXPower supply standardATX, bottom mountSlots for internal drives4 (2 x 2.5", 2 x 3.5")Expansion card slots7Max PSU lengthTop: 360mm, 240mm; Front: 240mmMax length of graphics card425mmMax height of CPU cooler170 mmMax number of fans12Fan mounting optionsTop: 120 mm x3/140 mm x2; Front: 120 mm x3; Side: 120 mm x2; Rear: 120 mm x1; Bottom: 120 mm x3Water cooling mounting optionsFront: 240 mm; Top: 360 mmNumber of fans installedNo fans includedType of fansNo fans includedButtons and controlsPower, ResetConnectorsUSB2.0 x2; USB3.0, HD AudioMaterial0.5 mm SPCCColorBlackHeight470 mmWidth218 mmDepth454 mm
Tootekood: D32 PRO MESH WHITEGTIN: 6970620554358Korpused
With the D32 series, Jonsbo targets anyone wanting to build their PC in a space-saving manner. Unlike the D32 STD, the D32 PRO PC case offers special and practical features like Back-Connect or improved front I/O, making it aimed at the high-end segment. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for Back-Connect motherboards Mesh side panel for a subtle appearance Plenty of space for cooling solutions, allowing for high-performance hardware installation Three dust filters protect your hardware from annoying dust particles The Jonsbo D32 PRO Mesh: Space-saving and subtle case for high-end hardware Whether midrange HTPC or high-end PC – the D32 PRO Mesh from Jonsbo comfortably fits a variety of build types. This minimal case accommodates graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height. In Back-Connect mode, the maximum CPU cooler height is reduced by just under seven millimeters. This means that even with the compact design of the case, adequate cooling for your hardware is ensured. Combined with up to six 120 mm fans or one 120 mm fan and four 140 mm fans, the case provides enormous airflow inside. No cable clutter with Back-Connect With Back-Connect motherboards, such as ASUS's BTF series, MSI's PROJECT ZERO series, or GIGABYTE's Stealth series, the case in B-mode with around six to seven millimeters additional space is almost completely free of visible cable clutter. Because most power and connection cables can be routed to the back of the motherboard, cable management is no longer necessary, and you still get a clean look inside your case. Powerful cooling in a compact space So your high-performance hardware stays adequately cooled in the compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for sufficient airflow, a large dual-tower CPU cooler, or even an installable 240 mm AiO, your hardware will remain cool even under load. Three dust filters on the front, top, and bottom ensure your hardware stays free from dust and dirt. As a result, your temperatures will always be at optimal levels, and the lifespan of your hardware will be extended.
The Jonsplus Z20 Mesh is a stylish and functional Micro-ATX case designed especially for PC enthusiasts who value a compact design and optimal cooling. With its mesh front and side panel, it offers excellent airflow. Mesh front and side panels for optimal cooling Compact size, including carrying handle – Perfect for portability Supports graphics cards up to 363 mm in length for high-end GPUs USB 3.1 Type-C front port for fast data transfer Compact dimensions save space without compromising on performance Efficient Cooling and Modern Design The Z20 Mesh is specifically engineered for top-notch airflow, ensuring efficient cooling of your components. Thanks to its well-thought-out mesh panels and optimized airflow, your PC system will stay cool and powerful even under heavy loads. Take advantage of high compatibility in a compact form factor. The case provides space for large GPUs, powerful cooling systems, and cable management without appearing bulky. Versatile Compatibility and Easy Installation This case supports both Mini-ITX and Micro-ATX motherboards and offers flexible mounting options for various hardware configurations. The well-designed interior makes installation and cable management easy. User-Friendly Front Ports With a USB 3.1 Type-C port, a USB 3.0 Type-A port, as well as audio and microphone jacks on the front, the Z20 Mesh gives you quick and convenient access to crucial interfaces for your peripherals. The integrated carrying handle makes the Z20 Mesh perfect for easy transportation – ideal for LAN parties, events, or flexible setups.
Vastupidav alumiiniumkorpus ja kompaktne suurus • Videokaardile ruumi kuni 35 cm • Toetus SFX- ja SFX-L toiteallikatele • Perforeeritud pinnad ja tolmufilter • USB-C ja tööriistavabad avamispaneelid
Midi tower with airflow optimization, mesh front, compatible up to E-ATX, 195 mm CPU cooler height, radiator support up to 360 mm, SimpliCable cable management & magnetic panels, three pre-installed fans The HAVN BF 360 Flow is ideal for gamers and hardware enthusiasts who demand no compromises: solid cooling performance, smart design, and full compatibility. With aerodynamically optimized airflow, a flexible interior, and clever SimpliCable cable management, this case provides the perfect foundation for your high-end build.Airflow cover for targeted cooling of GPU and CPUThree pre-installed fans: 2x 180 mm & 1x 140 mmCompatible with E-ATX motherboards up to 277 mm wideGPU bracket & 410 mm space – ready for RTX 50 SeriesMagnetic panels & SimpliCable – quick maintenance & clean cable managementHAVN BF 360 FlowHAVN BF 360 Flow: Airflow meets styleThe front features a distinctive ribbed mesh that draws in air precisely and reduces flow loss. An integrated guide with a 135° angle directs fresh airflow straight onto the GPU and CPU – providing maximum cooling without heat buildup. Flexible mounts for fans or radiators are included, supporting both air and water cooling solutions.HAVN BF 360 Flow side viewCooling power for your high-end hardwareUp to six fans can be installed. The three pre-installed fans deliver plenty of fresh air right out of the box. Alternatively, radiators up to 360 mm can be mounted at the front and top. With a CPU cooler height of 195 mm and a spacious interior, there’s ample room for large air coolers or custom water cooling loops. Anti-vibration rubber mounts on every bracket ensure whisper-quiet operation, even at peak performance.HAVN BF 360 Flow rear side viewCompatibility without compromiseThe BF 360 offers enough space for motherboards up to E-ATX (max. 277 mm). There’s a generous 410 mm clearance for graphics cards – perfect for current RTX and Radeon powerhouses.The integrated, adjustable GPU bracket reliably prevents GPU sag. Power supplies up to 200 mm fit in the lower compartment without restriction. Two modular drive trays can accommodate either 2x 2.5-inch or 1x 3.5-inch drives – all vibration-damped for quiet operation.HAVN BF 360 Flow rear motherboard traySimpliCable & magnetic panels – smart & stress-freeWith SimpliCable, you benefit from pre-routed cables, straps, and wide channels for super-fast and tidy cable management. The front and top panels are magnetically attached, with rubberized grips and a practical pull tab – maintenance and upgrades have never been easier.HAVN BF 360 Flow I/O panelModern I/O panel for your setupThe I/O includes a USB 3.2 Gen 2 Type-C, two USB 3.2 Gen 2 Type-A ports, and an HD audio jack – perfect for your peripherals and headsets. With the BF 360, you’re well equipped for the future, whether you’re gaming or working.
Classic 19" Rack with a lot of space for different drivesYou can remove the HDD cages with a few steps for easy mounting of internal devices.5 mounting slots with full height and the possibility to mount an ATX PSU ensures a professional and cost efficient solution.The lockable doors in front of the slots prevent, unauthorized access.Integrated air filters ensure clean air and a flawless cooling.KujutegurPüstikTüüpServerMaterjalTeras5,25" lahtrite arv43,5" lahtrite arv5Emaplaadi toetatud kujuteguridATX,Micro-ATX,uATX,Mini-ITXToote värvMustAknagaEi2,5" salvede arv2Sisemiste 3,5" salvede arv5Väliste 5,25" kettalahtrite arv4Püstikmontaaž3UMaterjali paksus1,2 mmSertifikaatRoHS, CEKaasas toiteplokkEiUSB 2.0 portide arv2AudiosisendEiAudioväljundEiInstallitud tagaventilaatorid2x 80 mmMaksimaalne tagaventilaatorite arv2Toetatud tagaventilaatorite läbimõõt80 mmToetatud kõvakettasuurused2.5,3.5"LED-indikaatoridVõimsus, HDDLähtestusnuppJahLaius485 mmSügavus530 mmKõrgus133 mmKaal9,34 kgPakendi laius560 mmPakendi sügavus630 mmPakendi kõrgus225 mmPakendi kaal11,1 kg
No. of drive bays: 6 Dimensions: 455 x 205 x 475 mm Weight: 5.27 Other features: - Side panel with window YES- Filter under the YES power supply- Filter on the upper panel YES- Filter on the front panel YES- Steel thickness: 0.7 mm- Space for PSU: 240 mm- Rubber flanges for cable entry holes- All herrings twisted in place of the broken ones- The radiator can not be installed on the front panel
Kompaktes Micro-ATX-Gehäuse von Kolink, waagerecht oder senkrecht aufstellbar, konzipiert als platzsparendes Case für Schulen oder Büros, für SFX-Netzteile, ein vorinstallierter 80-mm-Lüfter, 1x 3,5/2,5"- oder 3x 2,5"-Laufwerke
Cabinet Form Factor: Micro Torn Mainboard Form Factor1sisseehitatud Devices: LED Indicator Power Button Supported Mainboard Form Factor15.25-inch External Drivesahtleid: 12.5-inch Internal Drivesahtleid: 3 Maksimum Fans toetatud Quantity1(USB 3.0 (type A)) USB 2.0: 1(USB 2.0 (type A)) mikrofon-In: 1(3.5-mm minijack) Headphones: 1(3.5-mm minijack) Power seadme tüüp: toiteplokk Optional CPU Cooler Maksimum kõrgus140 mm Expansion Card Max pikkus: 290 mm kaasastarvikud180 mm Nominal kaal: 2.26 kg garantii Products Returnable1Box kaal Brutto (kg): 2.75 kg Retail Packaging Netokaal Carton1EAN Code: 42604556458981
Experience the gaming case 803B from LC-Power! Shaded X offers you a lot of features and a great variety of system configurations for ATX, Micro ATX and Mini ITX systems!
Cabinet Form Factor: Mini Torn Mainboard Form Factor1sisseehitatud Devices: LED Indicator Power Button Reset Button Supported Mainboard Form Factor120mm USB 2.0: 1(USB 2.0 (type A)) Audio liides: 2 (3.5-mm minijack) USB 3.01CPU Cooler Maksimum kõrgus: 160 mm Expansion Card Max pikkus: 350 mm Chassis Features10 mm kõrgus (mm): 420 mm laius (mm)1Box pikkus (mm): 486 mm Box laius (mm)1EAN Code: 471
LC-Power 2016MB. Formfaktor: Micro Tower, Type: PC, Produktfarve: Sort. Understøttede diametre for frontventilatorer: 120,140 mm, Understøttede diametre for bagerste ventilatorer: 120 mm, Understøttede diametre for øverste ventilatorer: 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 205 mm, Dybde: 385 mm, Højde: 381 mm. Pakkebredde: 268 mm, Pakkedybde: 473 mm, Pakkehøjde: 418 mm
