The MS FIGHTER V315 case with an attractive design will delight every computer gamer. It is equipped with dust filters and supports water cooling, and RBG fans will make sure that the case "glows" in the dark and raises the gaming experience to a higher level.
Small case for simple systems Two low-profile expansion slots for graphics cards Supports ITX-sized motherboards and CPU cooler height up to 38 mm Power supply: 1U Flex up to 150 mm One USB-C port on the I/O panel The Jonsbo NV10 in detail The Jonsbo NV10 is a small case that can be placed on a desk thanks to its lightweight design, and its simple black aesthetic fits into any setup. You can connect an external device to the USB-C port on the I/O panel. Hardware options The mini-tower supports installing ITX-sized motherboards. The CPU cooler should not exceed a height of 38 mm. The two low-profile expansion slots allow the installation of a low-profile graphics card up to 190 mm in length. When it comes to the power supply, only a 1U Flex power supply is supported, which should not be larger than 150 mm.
Tootekood: SST-GD06B USB 3.0GTIN: 4710713967649Korpused
Building off the successful GD04 and GD05, two chassis models that set benchmarks in 2009, SilverStone created the Grandia GD06 to again raise the expectation enthusiasts have for HTPC (Home Theater Personal Computer) chassis. SilverStone engineering team’s expertise in SFF (Small Form Factor) and HTPC are again in full display with GD06’s expanded capability in storage and cooling performance. These improvements were made with the compact depth maintained (340mm) and exterior visuals enhanced as the GD06 is stunningly beautiful as a computer chassis and fits perfectly in the living room. Its five hard drive storage is augmented by two hot-swappable bays for maximum flexibility while a front door lock and a rear Kensington Security Slot ensure security for the installed drives. Cooling is provided by three 120mm silent fans with filters for exceptional performance, quietness and effective dust prevention. For those in doubt that a small footprint HTPC chassis can be used to build a powerful and fully loaded media server, the Grandia GD06 will change their mind.- Positive air pressure design for excellent cooling/quietness and dust-prevention;- Incredible 340mm depth to fit comfortably inside home theater cabinet;- Designed with cable routing for easy installation;- Support 4 x 3.5” hard drives and 2.5” hard drive or SSD (Solid-state drive);- Support expansion cards up to 11 inches;- Includes two front USB 3.0 ports.Format microATXMaximum graphics card lenght 280 mmMaximum CPU-Cooler Height 70 mmSpecial Featuress 120-mm-Fan in der linken Seite (Fanrecording auch with 80-mm-Fan compatible), two 120-mm-Fan in der rechten Seite, Luftöffnung in der linken Seite and im chassisoberteil, ein CPU-Kühler up to 120 mm Höhe einbaubar wenn ein ODD weggelassen wird, maximale Netzteiltiefe von 150 mm, Netzteil-Ansaug-Luftöffnung im Boden with Staubfilter, es können alternativ auch three 3,5"- and two 2,5"-Festplatten eingebaut werden, Anti-Vibrations-Gummis for eine FestplattePower Supply SlotDesign ATXDrive Baysex
After bringing Mini-ITX into mainstream DIY (do it yourself) market in 2009 with the Sugo SG05, SilverStone is looking to define the category again with SG13, a newly evolved design that aims to satisfy every type of computer users. At only 11.5 liters in size, it has suitably small statue for easily integrating into numerous computing environments and will comfortably fit many standard components for general purpose or office builds. For enthusiasts and in keeping with Sugo series’ famed tradition, the SG13’s ability to fit 10.5” long expansion card, standard ATX power supply, and all-in-one liquid cooler in 120mm or 140mm size will help produce amazingly small and powerful systems.KujutegurMinitornTüüpPCMaterjalTeras3,5" lahtrite arv1Emaplaadi toetatud kujuteguridMini-ATX, Mini-DTXToote värvMust, ValgeAknagaEi2,5" salvede arv1Sisemiste 3,5" salvede arv1Laienduspesade arv2CPU jahuti maksimaalne kõrgus6,1 cmToiteploki maksimaalne pikkus15 cmKaasas toiteplokkEiUSB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendJahAudioväljundJahMaksimaalne esiventilaatorite arv1Toetatud esiventilaatorite läbimõõt120,140 mmToetatud kõvakettasuurused2.5,3.5"Laius225 mmSügavus285 mmKõrgus181 mmKaal2,47 kg
Case type: Cube Case, Midi-Tower Form Factor: Micro-ATX, Mini-ITX Colour: Black Main colour: Black Accent colour: Gold Noise dampening: No Width(exact): 260 Height(exact): 190 Depth(exact): 280 Width: 200 - 300 mm Height: 100 - 200 mm Depth: 200 - 300 mm Material: Plastic, Steel Weight (exact): 2 Weight: up to 2 kg, 2 - 4 kg USB: 2x USB 3.0: 2x Audio output: 1x Audio input: 1x Internal 2.5" bays: 4x Internal 3.5" bays: 3x PCI slots: 2x Motherboard tray: no Remote: no Cable management: no Front LCD/TFT display: no Filter: no Power supply: no Power supply format: ATX Power supply position: Rear Lower Fans pre-installed: 1x 120mm 120mm Fan: 1 Fan colour: Black Fan controller: no Card reader: no Front door: no Hot-swap: no Position I/O: Front/Cover HDD anti-vibration: no Radiator-mounting: no Lighting: no
EXCEPTIONAL AIRFLOW, SIGNIFICANT QUIET The be quiet! Pure Base 500DX Black is optimized for high cooling performance and designed for those who seek high airflow. High airflow intake front panel and top cover for maximum performance Three Pure Wings 2 140mm fans guarantee high cooling performance and silent operation ARGB LED at the front and inside the case USB 3.1 Type C Gen. 2 for latest hardware Water cooling ready for radiators of up to 360mm Up to two SSDs can be installed prominently behind the window panel Generous space for high-end graphics cards and large coolers Side panel made of tempered glass Three-year manufacturer’s warranty HIGH AIRFLOW AND MAXIMUM PERFORMANCEAll parts optimized for airflow and performance For all who strive for maximum performance and especially with water-cooled systems, the Pure Base 500DX Black with its extremely air-permeable front and top cover is the right choice. The dust filters on the front and bottom are easy to remove for cleaning. THREE PREINSTALLED PURE WINGS 2 Whisper-quiet operation Three preinstalled Pure Wings 2 fans with airflow-optimized fan blades that ensure perfect airflow and cooling. Despite the compact case design the fans at the front, top and rear are 140mm models, resulting in very quiet operation. Up to two 140mm fans can be installed in addition. IMPRESSIVE ILLUMINATION ARGB light at the front and inside the case ARGB LEDs offer multiple colors and modes to individualize the look of the case from the inside as well as from the outside. You can optionally synchronize lighting with your motherboard or ARGB controller. SMART I/O PORTState-of-the-art technology for your systemA USB 3.1 Type C Gen. 2 connector is provided on the front I/O port and allows usage of latest hardware. There is also a switch on the front panel to control the interior and exterior LEDs. SOPHISTICATED DESIGN Generous space for high-end hardware The Pure Base 500DX Black provides generous dimensions to install high-end graphics cards and large coolers of up to 190mm in height. Fans or a radiator of up to 360mm can be installed easily at the front and the top area also provides space for more fans or a radiator of up to 240mm. EYE-CATCHING FEATURES And great cable routing possibilities Pure Base 500DX Black offers various options for installing up to five SSDs in total. Two can be installed for prominent viewing through the window panel. To hide any unwanted cables, the case offers excellent cable routing options. FUNCTIONAL PSU SHROUD Offering a neat interior The PSU shroud perfectly covers the cables and PSU. It also contains a double HDD cage with decoupled mountings that reduce vibrations and help maximize the silence. The cage can also be repositioned to install a radiator of up to 360mm at the front. The power supply unit can be easily installed from behind, mounted on the PSU bracket provided. TEMPERED GLASS WINDOWA perfect view inside your PCThe high-quality, fully-windowed side panel offers a perfect view of the components inside your PC case. The window is made of tinted and tempered glass with black painted side bars.
Midi-Tower-Gehäuse, mit Seitenteil aus Tempered Glass, sehr guter Airflow dank Vorderseite aus Mesh, bietet zwei ARGB-Strips an Front und Seite, drei integrierte ARGB-PWM-Lüfter, ARGB-Controller inklusive
