Full Tower CTE C750 TG ARGB case The CTE C750 TG ARGB is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, motherboard side and rear of the case. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for Centralized Thermal Efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE C750 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE C750 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. We provide cooling performance beyond your imagination! The CTE C750 TG ARGB is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, rear and motherboard side. Its dual-chamber design allows users to showcase key components and provides plenty of space for excellent cooling solutions, with the ability to accommodate up to 14 fans inside the case thanks to front, bottom and rear fan brackets and a top and side M/B vent. It also has lots of little details like swivel PCI-E slots, removable filters, a pump and tank bracket, and Velcro straps for easy cable management. Whether you're looking for a case for custom liquid cooling or a dual AIO setup, the CTE C750 TG ARGB is a high-end presentation case that allows you to imagine something outside the box. Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE C750 TG ARGB's versatile interior includes two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Maximum radiator support - up to 360mm/420mm radiators in multiple locations Our CTE C750 TG ARGB offers excellent cooling support for custom liquid cooling enthusiasts, there are various support locations and enough space to arrange your own configurations. Up to 5 radiators (three 360mm and two 240mm) can be mounted simultaneously on our CTE C750, providing incredible radiator support. To ensure AIO compatibility, radiators up to 420 mm/360 mm in diameter can be installed on the front, rear and motherboard side, giving PC enthusiasts unlimited possibilities for the perfect configuration. All your dream cooling components will fit! The CTE C750 Full Tower case has a huge fan and cooler installation capacity: up to fourteen 140 mm fans and 360 mm/420 mm AIO coolers in various locations. Moreover, equipped fan brackets at the front, bottom and rear ensure easy installation of all desired cooling components. Amaze your world with three pre-installed 140 mm CT140 ARGB fans The CTE C750 TG ARGB Full Tower case is equipped with three 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance. Perfect protection against dust There are small details on the top, front, bottom, rear and right side of the housing, removable filters that provide excellent dust protection and can be easily removed for cleaning.
Special Big-Tower, fully modular case, four modules already included, up to seven fans possible, GPUs up to 440 mm / CPU up to 200 mm height, up to four drives possible, radiator up to 420 mm, 1x USB-C / 2x USB-A
Midi-Tower PC case with excellent airflow Supports ATX motherboards and GPUs up to 330 mm in length Stylish glass front and side with side ventilation for optimal airflow Drive bays for up to four 2.5-inch drives Integrated cable management for neat cable organization Comprehensive front I/O with fan control support The Kolink Observatory HF Glass Core Midi-Tower: Merging design and performance Boost the performance of your gaming PC affordably with the Kolink Observatory HF Core PC case. This midi-tower offers comprehensive support for high-performance gaming hardware and numerous cooling options. The intelligently designed interior ensures maximum flexibility and makes assembling your new build easier. The PSU shroud and cable grommets create a tidy aesthetic – clean and functional! Thanks to its side air intakes, the Kolink Observatory HF Core features outstanding airflow to keep your hardware cool. This midi-tower case is made from high-quality materials. The chassis is made of steel, while the right side panel is fully constructed from tempered glass. The side panel is hinged and can swing open, making installation and upgrades easy. Note: This case does not include pre-installed fans. This saves you costs and gives you complete freedom of choice. Space for powerful gaming hardware The Kolink Observatory HF Glass Core provides extensive support for your gaming hardware. It supports ATX, Micro-ATX, and Mini-ITX motherboard form factors for broad compatibility. There are seven PCI expansion slots and room for high-end GPUs up to 330 mm long, as well as 160 mm high CPU coolers. In addition to accommodating power supplies up to 180 mm in length, the case also features four drive bays, allowing you versatile storage solutions. Two bays can fit either 2.5-inch or 3.5-inch drives, while the other two are designed specifically for 2.5-inch SSDs. Optimized airflow for your gaming PC At the front, you can mount up to three 120 mm or 140 mm fans or a radiator up to 360 mm. The top supports either two 120 mm or 140 mm fans, and the PSU shroud can accommodate up to two 120 mm fans. A 120 mm fan or 120 mm radiator can be installed at the rear. ATX case with numerous connectivity options The Kolink Observatory HF Glass Core features one USB 3.0 and two USB 2.0 ports as part of the front I/O panel for your peripheral devices or USB drives. This also includes an HD audio jack as well as power and reset buttons. You can control fan speed using the reset button or via a 3-pin ARGB cable to your main fan.
Minimalist mini-tower, includes one Mercury AM120S fan, supports up to five fans, accommodates GPUs up to 340 mm / CPUs up to 162 mm in height, supports up to three drives, radiator up to 240 mm, 1x USB-C / 2x USB-A
The Jonsbo D41 Screen ATX case in black is a sleek and versatile option for building a computer. Its closed front design makes for a silent build and it features an integrated 8-inch display. The case is made with tempered glass and can accommodate up to 8 fans and 3 radiators. It can also fit GPUs up to 400mm in length and has a movable power supply for optimal space allocation.
Elegantes und vielseitiges mATX-Gehäuse, geschlossene Front für Silent-Builds, Seitenteil aus Temperglas, bis zu 8 Lüfter und 3 Radiatoren möglich, für GPUs mit max. 400 mm Länge, versetzbares Netzteil für optimale Raumaufteilung
XPG BATTLECRUISER II ST. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Frontventiler installeret: 3x 120 mm, Understøttede diametre for frontventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 225 mm, Dybde: 506 mm, Højde: 550 mm. Pakkebredde: 339 mm, Pakkedybde: 643 mm, Pakkehøjde: 615 mm
Small case for simple systems Two low-profile expansion slots for graphics card Supports ITX-sized motherboards and CPU cooler height up to 38 mm Power supply: 1U Flex up to 150 mm One USB-C port on the I/O panel The Jonsbo NV10 in detail The Jonsbo NV10 is a small case that can be placed on your desk thanks to its light weight and fits into any setup with its simple black design. You can connect an external device to the USB-C port on the I/O panel. Hardware options The mini-tower supports the installation of ITX-sized motherboards. The CPU cooler should not exceed a height of 38 mm. In addition, the two low-profile expansion slots allow for the installation of a low-profile graphics card up to 190 mm. Please note that only a 1U Flex power supply unit no larger than 150 mm can be used.
Black/white Midi-Tower, extravagant design with panoramic window, for motherboards up to ATX format, exceptionally good airflow, two different motherboard positions, 2x USB-A ports on the I/O panel
Der Aerocool D501A bietet dir genug Platz für deine High-End-Komponenten. Dabei wird deine Gaming-Hardware durch die umfangreichen Kühloptionen effektiv gekühlt. Zudem ermöglicht das Tempered Glass an der Seite einen großzügigen Einblick in das Innenleben deines Gehäuses. Eine Holzverschönerung an der Front rundet das Gesamtbild ab. Leistungsstarke Hardware benötigt eine ebenso leistungsstarke Kühlung, die eine Überhitzung verhindert. Im Aerocool D501A lassen sich dementsprechend bis zu 11 Lüfter einbauen. Die Vorderseite unterstützt den Einbau von drei 120 oder 140 mm großen Lüftern, während am Deckel drei 120-mm- oder zwei 140-mm-Lüfter möglich sind. An der Seite, sowie auf der Netzteil-Abdeckung kannst du zwei weitere Lüfter der Größe 120 mm einbauen. Zusätzlich lässt sich an der Hinterseite ein weiterer 120-mm-Lüfter montieren. Die vier verbauten ARGB-Lüfter lassen sich ganz nach deinen Wünschen anpassen und sorgen für einen guten Luftfluss im Gehäuse. Der Midi-Tower unterstützt den Einbau von Grafikkarten bis zu einer Größe von 400 mm. Damit sind demzufolge auch die aktuellen NVIDIA GPUs der 50er-Generation möglich. Mainboards sind bis zum ATX-Format realisierbar. Der CPU-Kühler sollte eine Höhe von 171 mm nicht überschreiten. Beim Netzteil dagegen sind dir kaum Grenzen gesetzt, denn dieses darf bis zu 220 mm lang sein.
