Tootekood: D32 PRO WHITEGTIN: 6970620554334Korpused
With the D32 series, Jonsbo targets everyone who wants to build their PC in a space-saving way. The D32 PRO PC case, in contrast to the D32 STD, comes with special and practical features such as back-connect or improved front I/O, aimed at the high-end segment. Elegant and space-saving design for mATX motherboards Seamless cable management with cut-outs for back-connect motherboards Tempered glass side panel ensures a subtle appearance Plenty of room for cooling solutions allows for installation of powerful hardware Three dust filters protect your hardware from troublesome dust particles The Jonsbo D32 PRO White: A space-saving and understated case for high-end hardware Whether it’s a midrange HTPC or a high-end PC, the D32 PRO White from Jonsbo offers comfortable space for different types of builds. This minimalist case can accommodate graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height. In back-connect mode, the maximum CPU cooler height is reduced by just under seven millimeters. This ensures adequate cooling for your hardware even with the compact design of the case. In combination with up to six 120-mm fans, or one 120-mm fan and four 140-mm fans, the fans also provide exceptional airflow inside the case. No cable clutter with back-connect With back-connect motherboards such as ASUS's BTF series, MSI's PROJECT ZERO series, or GIGABYTE's Stealth series, the case in B mode—with about six to seven millimeters of additional space—is almost completely free of visible cable clutter. Since most power and connection cables can be connected on the back of the motherboard, you save on cable management while still keeping your case looking clean. Together with the tempered glass side window, this makes for an especially attractive view of your hardware. Powerful cooling in a small space To ensure that your high-performance hardware stays cool even in this compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120-mm fans for sufficient airflow, a large dual-tower CPU cooler, or even a 240-mm AiO cooler, your hardware will stay cool even under load. Three dust filters at the front, top, and bottom ensure your hardware remains free from dust and dirt. As a result, your temperatures always stay optimal and, among other benefits, the lifespan of your hardware is also extended.
Tootekood: D32 PRO MESH BLACKGTIN: 6970620554341Korpused
With the D32 series, Jonsbo targets everyone who wants to build their system in a space-saving manner. Unlike the D32 STD, the D32 PRO PC case is aimed at the high-end segment with special and practical features such as back-connect and improved front I/O. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for back-connect motherboards Mesh side panel for a subtle appearance Plenty of space for cooling solutions allows the installation of powerful hardware Three dust filters protect your hardware from annoying dust particles The Jonsbo D32 PRO Mesh: Compact and subtle case for high-end hardware Whether midrange HTPC or high-end PC – builds of all types fit comfortably in the D32 PRO Mesh by Jonsbo. The minimalistic case accommodates graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height. In back-connect mode, only the maximum CPU cooler height is reduced by about seven millimeters. Thus, despite the compact design of the case, adequate cooling for your hardware is ensured. Working with up to six 120 mm fans or one 120 mm and four 140 mm fans, airflow inside the case is enormous. No cable clutter with back-connect With back-connect motherboards, such as those from ASUS’s BTF series, MSI’s PROJECT ZERO series, or GIGABYTE’s Stealth series, the case in B-mode, with approximately six to seven millimeters more space, is nearly free from visible cable clutter. Since most power and connection cables can be plugged in at the back of the motherboard, you save on cable management while still maintaining a clean look inside your case. Powerful cooling in a small space To ensure your high-performance hardware is sufficiently cooled in such a compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans providing sufficient airflow, a large dual-tower CPU cooler, or even an installable 240 mm AiO, your hardware stays cool – even under load. Three dust filters at the front, top, and bottom make sure your hardware stays free from dust and dirt. This keeps your temperatures always at an optimal level and also extends the lifespan of your hardware.
With the D32 series, Jonsbo targets anyone looking to build a space-saving setup. The D32 PRO PC case, unlike the D32 STD, is aimed at the high-end segment with special and practical features such as Back-Connect or an improved front I/O.Elegant and space-saving design for mATX motherboardsSeamless cable management with cutouts for back-connect motherboardsMesh side panel creates a discreet appearanceAmple space for cooling solutions allows installation of powerful hardwareThree dust filters protect your hardware from annoying dust particlesThe Jonsbo D32 PRO Mesh: Space-saving and discreet case for high-end hardwareWhether mid-range HTPC or high-end PC – builds of all types can comfortably fit in the D32 PRO Mesh from Jonsbo. In this minimal case, graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height can be accommodated. In back-connect mode, the maximum height of the CPU cooler is reduced by just under seven millimeters.Thus, adequate cooling for your hardware is ensured even with the compact design of the case. Combined with up to six 120-mm fans, or one 120-mm fan and four 140-mm fans, the fans also provide tremendous airflow inside the case.No cable clutter with Back-ConnectWith back-connect motherboards such as the BTF series from ASUS, the PROJECT ZERO series from MSI, or the Stealth series from GIGABYTE, the case in B-mode, with about six to seven millimeters more space required, is virtually free of visible cable clutter.Since most power and connection cables can be attached to the back of the motherboard, you save on cable management and still maintain a clean look inside your case.Powerful cooling in a small spaceTo ensure your high-performance hardware stays properly cooled in the compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120-mm fans for sufficient airflow, a large dual-tower CPU cooler, or even a 240-mm AiO that can be installed, your hardware remains cool even under load.Three dust filters on the front, top, and bottom ensure your hardware stays free from dust and dirt. This way, your temperatures remain at an optimal level and the service life of your hardware is extended.
Strimer Plus V2 Highly customizable addressable RGB extension cables. Create a unique PC look with outstanding quality and material Compatible with L-Connect 3 for personalizing light effects
Tootekood: SST-GD06B USB 3.0GTIN: 4710713967649Korpused
Building off the successful GD04 and GD05, two chassis models that set benchmarks in 2009, SilverStone created the Grandia GD06 to again raise the expectation enthusiasts have for HTPC (Home Theater Personal Computer) chassis. SilverStone engineering team’s expertise in SFF (Small Form Factor) and HTPC are again in full display with GD06’s expanded capability in storage and cooling performance. These improvements were made with the compact depth maintained (340mm) and exterior visuals enhanced as the GD06 is stunningly beautiful as a computer chassis and fits perfectly in the living room. Its five hard drive storage is augmented by two hot-swappable bays for maximum flexibility while a front door lock and a rear Kensington Security Slot ensure security for the installed drives. Cooling is provided by three 120mm silent fans with filters for exceptional performance, quietness and effective dust prevention. For those in doubt that a small footprint HTPC chassis can be used to build a powerful and fully loaded media server, the Grandia GD06 will change their mind.- Positive air pressure design for excellent cooling/quietness and dust-prevention;- Incredible 340mm depth to fit comfortably inside home theater cabinet;- Designed with cable routing for easy installation;- Support 4 x 3.5” hard drives and 2.5” hard drive or SSD (Solid-state drive);- Support expansion cards up to 11 inches;- Includes two front USB 3.0 ports.Format microATXMaximum graphics card lenght 280 mmMaximum CPU-Cooler Height 70 mmSpecial Featuress 120-mm-Fan in der linken Seite (Fanrecording auch with 80-mm-Fan compatible), two 120-mm-Fan in der rechten Seite, Luftöffnung in der linken Seite and im chassisoberteil, ein CPU-Kühler up to 120 mm Höhe einbaubar wenn ein ODD weggelassen wird, maximale Netzteiltiefe von 150 mm, Netzteil-Ansaug-Luftöffnung im Boden with Staubfilter, es können alternativ auch three 3,5"- and two 2,5"-Festplatten eingebaut werden, Anti-Vibrations-Gummis for eine FestplattePower Supply SlotDesign ATXDrive Baysex
The Grandia GD10, along with GD09, is a culmination of SilverStone’s decade-long experience in HTPC case design and manufacturing into a product that every PC enthusiast can enjoy. The incredible efficiency in which it utilizes all available space results in a case that is close in size externally to Micro-ATX based GD04 and GD05, yet capable of fitting most important full size standard components including wider ATX motherboards (SSI-CEB) such as ROG or other gaming-centric models. All drive cages have been designed similarly to those from the popular ML03 case to provide maximum flexibility in drive configuration without the need for additional adapters. For cooling, all positive pressure and smooth airflow designs were retained from previous Grandia models while improvements were made to filter access for even easier maintenance. With the addition of a lockable front door, the GD10 offers an attractively sized case that is capable and user-friendly for those interested in building a system with extra security and application that exceeds typical PC or HTPC environments.- Lockable front door ensures security of system and drives- Positive air pressure design for excellent cooling/quietness and dust-prevention- Support expansion cards up to 12.2 inches- Support ATX motherboards- Quick access filters included- Incredible 362mm depth to fit comfortably inside home theater cabinet- Drive cages with multi-purpose mounts eliminate need for adaptersFormat ATX, SSI-CEBMaximum graphics card lenght 310 mmMaximum CPU-Cooler Height 138 mmSpecial Featuress two 120-mm-Fan auf der rechten Seite included (900 U/min, 18 dB(A)); ein 120-mm-Fan auf der linken Seite included (900 U/min, 18 dB(A)), compatible with 80-mm-FanPower Supply SlotDesign ATXDrive Baysexternal 5,25 inches 1internal 3,5 inches 22,5 inches 1FansIncluded 3x 120 mmInstallable 2x 80 mmFront-SidePorts USB 3.0 2Audio 2Back-SideSlots Full-Size 7additional Full-Size 1Product dimensions 442 x 171 x 362 mmWeight 4.8 kg
Cabinet Form Factor: Midi Torn Mainboard Form Factor1Supported Mainboard Form Factor: ATXMicro ATXMini-ITX 3.5-inch Internal Drivesahtleid120mm USB 3.0: 1(USB 3.0 (type A)) USB 2.0: 2 (4-pin USB (type A)) Audio liides1(3.5-mm minijack x 2) Power seadme tüüp: toiteplokk Optional Power Device Location1Lisatarvikud: Screws Chassis Features10 mm kõrgus (mm): 425 mm laius (mm)195 mm Warranty Products Returnable: Jah garantii Term (month)1Box kaal Brutto (kg): 3.86 kg Retail Packaging Netokaal Carton1kg Packs in Box: 1EAN Code: 42604556436341
Internal 4x 2.5 ", 3x 3.5" (cross, hard drive cage), Front I / O 2x USB-A 3.0, 1x headphone / microphone, PCI slots 4, Fan (front) 1x 120mm or 3x 120mm (optional) or 2x 140mm (optional), Fan (rear) 1x 120mm, Fan (top) 2x 140mm (optional), Radiator sizes 120/140/240 / 280mm front, 120 / 240mm top, 120mm rear, Mainboard to μATX, Supported Motherboards Mini-ITX (6.7 "x6.7") / μATX (9.6 "x9.6"), Power supply ATX (max 325mm deep without front radiator and without HDD cage), Power supply position below, CPU cooler up to max. 166mm height Graphic cards up to max. 346mm, Color black, inside black, Dimensions (WxHxD) 210x411x411mm, volume 35.47l, weight 5.72kg, Special features Cable management, dust filter, glass viewing window, MCB-NR400-KGNN-S00
No. of drive bays: 7 Dimensions: 530 x 232 x 545.5 mm Weight: 19.85 Other features: Expansion sockets 8 + 2 The maximum length of the GPU is 400 mm The maximum cooling length of the processor is 170 mm Heatsink compatibility 140/280/360 mm Fans: Front: up to 3 x 120 mm / 3 x 140 mm / 2 x 200 mm Top: up to 3 x 120 mm / 2 x 140 mm / 2 x 200 mm Back: up to 1 x 120 mm / 1 x 140 mm
Kompaktes Mini-ITX-Gehäuse von Raijintek, aus eloxiertem Aluminium, Weiß mit schwarzem Innenraum und Rückseite, Zwei Seitenteile für tiefe Einblicke, für Mini-ITX-Mainboards und kleiner, 2x 2,5"- & 2x 2,5/3,5"-Slots, GPUs bis 28 cm & CPU-Kühler bis 13,5 cm
Kompaktes Mini-ITX-Gehäuse mit USB 3.0, Rahmen aus stabilem Stahl, Platz für 30,9 cm lange Grafikkarten, zwei vorinstallierte Lüfter, zahlreiche Luftdurchlässe für Airflow, herausnehmbare Staubfilter
Kompaktes Gehäuse für UCFF-Boards (Intel NUC), lüfterlose Kühlung durch passives Gehäusedesign, große Kühlfinnen, gebürstetes Aluminium in schwarz, Front mit 2x USB-3.0- und 2x USB-2.0-Ports, Platz für 1x 2,5-Zoll-Datenträger, VESA-kompatibel
Vielseitiger Midi-Tower in Weiß, Front- und Seitenteil aus Tempered Glass, mit Reverse Mode und hochkanter Grafikkartenmontage, für bis zu 10 Lüfter, 1x USB 3.1 Typ C / 2x USB 3.0 Typ A
