Micro-ATX case for DIY NAS, one fan pre-installed, GPUs up to 230 mm / CPU up to 70 mm height, 6x 3.5 / 2x 2.5 inch drives possible, 1x USB-C / 1x USB-A
XPG INVADER X. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Placering af strømforsyning: Bund. Understøttede diametre for sideventilatorer: 120 mm, Understøttede diametre for bagerste ventilatorer: 120,140 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 245 mm, Dybde: 475 mm, Højde: 448 mm
Black case with 270° tempered glass side panel Optimal cooling options with up to nine fans and radiators up to 420 mm Spacious interior for versatile high-end motherboards up to E-ATX Room for graphics cards up to 460 mm and CPUs up to 170 mm in height Installation of up to nine SSDs enables extensive storage options Supports motherboards with back-connect (ATX, mATX) Modular design simplifies assembly The TRYX LUCA L70: Midi-Tower for gaming PCs with maximum power The TRYX LUCA L70 is a large midi-tower that convinces not only with its wide range of hardware possibilities, but also with its timeless design that fits into any setup. The tempered glass on the front and side puts your high-end build in the spotlight—ready to receive true admiration. With the LUCA L70, you’re perfectly equipped to assemble your gaming PC exactly as you wish. This midi-tower offers more than enough space to keep your hardware cool, and is also extremely easy to take apart and put back together. Building your high-end setup has never been so easy! Comprehensive cooling options for your new build When building your own PC, cooling is one of the most important factors to consider. The LUCA L70 allows the installation of up to nine fans: two 120 mm or 140 mm fans on the top, three 120 mm or 140 mm fans on the side, three 120 mm or 140 mm fans on the bottom, and one 120 mm fan at the rear. Note that with this combination, the power supply unit must be mounted on the top of the case. If you prefer mounting the PSU on the bottom, three fans can be installed on the top and only one on the bottom. Water cooling enthusiasts will also not be disappointed: radiators up to 420 mm can be installed in several locations. If the power supply is on the top, only a 240 mm radiator is possible there and a maximum 360 mm radiator on the bottom. If you mount the PSU at the bottom, there is room for a 420 mm radiator on the top as well as on the side. To prevent unnecessary dust buildup inside the case, there are dust filters on the top and bottom. This ensures a much longer lifespan for your hardware and saves you time and annoying cleaning. Thanks to the many options for installing fans and radiators, effective cooling is ensured so your high-end hardware always performs at its peak. In addition, the tower stands 4 mm above the ground on X-shaped legs, which further improves airflow. Case for powerful hardware So you can play even the most demanding games smoothly at high settings, the LUCA L70 accommodates a high-performance graphics card up to 460 mm in length. An included GPU bracket ensures it’s not subject to gravity. Vertical GPU installation is also possible—appropriate accessories must be purchased separately. The midi-tower is compatible with motherboards up to E-ATX with a width of up to 280 mm. To avoid cable clutter, it also supports motherboards with back-facing connectors when the PSU is on top, but only in ATX or micro-ATX format. The CPU height must not exceed 170 mm, and the power supply should be no longer than 190 mm. For plenty of storage for your programs and games, you can attach up to nine 2.5-inch drives to the side of the LUCA L70. Tool-free assembly and disassembly To make installing and swapping hardware as easy as possible, the LUCA L70 is fully modular. The front, side, and other parts can be taken apart and reassembled without any additional tools, plus the motherboard tray can be moved so you can install the motherboard, CPU, and CPU cooler independently.
Especially with compact cases equipped with powerful gaming hardware, the focus should be on optimal cooling. With the Meshlicious, Lian Li's subsidiary Ssupd (Sunny Side Up Design), in collaboration with Ncase, presents an exceptionally small Mini-ITX case whose front, top, and side panels are all made entirely of fine mesh, ensuring virtually unobstructed airflow. The interior is also extremely versatile thanks to its clever design. Graphics cards up to 4 slots high can be installed behind a Mini-ITX motherboard. There is also space for large radiators and numerous data drives, which can be powered by either an SFX or ATX power supply — all in a volume of just 14.67 liters. The features of the Ssupd Meshlicious Full Mesh PCIE 5.0 Edition Mini-ITX Case: Extremely compact Mini-ITX case for high-performance gaming hardware Front, top, and side panels made from fine mesh for optimized airflow Supports GPUs up to 4 slots high and 336 mm long Space for two 140 mm fans or a 280 mm radiator at the front Includes a PCIe 5.0 riser card Compatible with ATX or SFX format power supplies Room for up to two 3.5-inch or seven 2.5-inch drives I/O panel with USB-C 3.1 and USB 3.0 Type-A Ssupd Meshlicious: Simple but functional design Externally, the Ssupd Meshlicious stands out at first glance due to its particularly compact SFF format and its extensive mesh panels. The top, front, and both side panels are made from fine mesh, which provides ample fresh air intake while also being light-permeable. All panels can be easily removed thanks to four pins on each, making the installation of high-end gaming hardware easier. The minimalist I/O panel on the lid features a USB-C 3.1 port, a USB 3.0 Type-A port, and an LED-lit power button. The motherboard connections are accessible as usual from the back of the case. On the inside, the Ssupd Meshlicious proves to be highly adaptable. Those who prefer a powerful gaming setup can install a graphics card up to 4 slots high and 336 mm long vertically behind the motherboard tray. Ssupd provides a PCIe 5.0 riser card for this purpose. The GPU ports then face downward and are accessible via an opening. The cable connections must be angled, and an appropriate HDMI cable is included. Versatile and thoughtfully designed In this configuration, the front can accommodate up to two 140 mm fans or a 280 mm radiator. There is 53 mm of space for CPU coolers, as the motherboard tray can be repositioned. By reducing the GPU height to three or two slots, the motherboard tray can be moved back to make room for CPU coolers up to 73 mm high. Alternatively, a compact 2-slot graphics card of up to 211 mm in length can also be installed horizontally, though this comes at the expense of the front radiator. Below it, a provided bracket can be attached to hold two 3.5-inch or four 2.5-inch drives. When using an optional power supply, you can choose between ATX, SFX, or SFX-L formats. The latter frees up space for another 2.5-inch drive. At the bottom, in both configurations, two 2.5-inch drives can be installed in this versatile and stylish Mini-ITX case.
Effective M.2 cooler for M.2 SSDs in 2280 format, prevents thermal throttling, compatible with single/double-sided M.2 2280 SSDs, four 4-mm copper heatpipes
