Black midi-tower for gaming PCs, airflow-optimized thanks to mesh, for motherboards up to ATX, 2x 160 mm ARGB fans pre-installed, supports 360 mm radiators, for GPUs up to 386 mm in length
The Antec FLUX White Midi Tower Case is a stylish and functional choice for your PC build. With a gross weight of 10.07 kg and dimensions of 31.2 cm in width and 57 cm in depth, this case provides ample space for your components. It supports a CPU cooler height of up to 180 mm and a maximum graphics card length of 408 mm, making it suitable for high-performance hardware. The sleek white design and ATX form factor ensure it fits seamlessly into any setup.
The DIGITUS wall-mounted data communications cabinet is equipped with a glazed door and a cable gland in the roof and floor. The steel structure is made of steel sheet up to 1.5 mm thick. It is possible to change the side of the door hinges and adjust the depth. The rack cabinets are delivered unassembled, in a flat package. Assembly is carried out in a few simple steps thanks to the enclosed "step-by-step" instructions. Installation cabinet supplied unassembled Quick installation Door opening angle: 200° 1-point locking on front door 483 mm (19") rack profiles mounted at the front inside the cabinet, galvanized 483 mm (19") rack profiles with depth adjustment 1.1-1.5 thick, high-strength sheet steel, powder-coated Cable inlet with brush strip in the roof and plastic cover in the floor Ventilation slots for active and passive air supply and exhaust Front door: glass, single Side panels: on two sides Assembled: no
Versatile midi-tower, front and side panel made of tempered glass, large mesh areas on the left side panel and lid, 2x 140mm & 1x 120mm ARGB PWM fans pre-installed, GPU length of up to 420mm, CPU cooler height up to 175mm
M.2 NVMe PCIe-4.0-Karte, zur Montage von M.2 SSDs in einem PCIe-Slot, integrierter Kühlkörper, bis zu 64 Gbit/s, inklusive Low-Profile Slotblende und Wärmeleitpads
We create solutions that make a difference in everyday lifeQoltec's SSD Drive Pocket is the ideal solution for those looking for mobile and easy-to-use data storage options, and is an interesting alternative, not only for those with documents or private files on disks, but also for small businesses wishing to archive their computer data without investing in other costly solutions.Data transfer of up to 10GB/sThe M.2 drive enclosure from Qoltec is a: suitable for M.2 SSD NVMe with M-Key and SATA with B+M-Key with sizes: 2230, 2242, 2260, 2280, UASP support, allows multiple commands to be executed at the same time, OTG support, works with laptops and smartphones USB 3.1 Gen2 interface enables data transfer at a speed of 10 Gb/s, device is compatible with USB 3.1 Gen1 and USB 2.0, LED indicates copy status, Single M.2 drive supports up to 2TB, Useful when there is no other way to connect an SSD, USB cable included, no need to install drivers, simply plug into a USB port and use thanks to the simplicity of the Plug&Play function. Maximum mobility in an elegant aluminium housingThe compact and handy enclosure for your M.2 SSD is a stylish protection for your valuable data. The case is made of high-quality aluminium, which further helps to dissipate heat. The compact size of the enclosure will allow you to take it with you to work or wine places, the pocket fits easily into a backpack. The durable enclosure provides effective protection against crushing and prevents any damage to the drive.Support for M.2 SATA and NVME drivesTo install the SSD, you don't need any special tools, just unscrew and slide out the case, insert the drive accordingly and slide it back into the case and screw it on. After connecting the pocket to the device of your choice, you are ready to go, the device is ready to operate.
The ASUS Cobble storage enclosure offers a practical solution for your data storage needs, combining functionality with convenience. Designed for solid state drives, this enclosure supports M.2 form factors including 2242, 2260, and 2280. With a data transfer rate of 10 Gbit/s via USB-C 3.2 (Gen 2x1), efficient data management is within reach. Featuring a tool-free mounting design, installing your drive is quick and hassle-free, providing accessibility without the need for additional tools. Constructed with durability in mind, the ASUS Cobble is equipped with overheat protection and is rated IP55, making it resistant to water, dust, and scratches. This ensures that your storage device remains safe in various environments, whether at home or on the go. With an operational temperature range of 0°C to 40°C and a humidity tolerance of 15 - 90% (non-condensing), this enclosure can handle diverse conditions while maintaining optimal performance.
RACK 19" 2U server cases from LanbergOur 19" RACK server chassis is an excellent choice for both professional data centers and advanced individual users. This 2U enclosure is designed to meet the most demanding needs in server construction and operation, while having a real impact on the performance of the entire system. Thanks to its well-thought-out design, it will excel in business and industrial environments where reliability, flexibility and efficient airflow are important. The new series are advanced server enclosures with a variety of fan configurations and mounting space, allowing you to expand your hardware capabilities even more easily. These enclosures are distinguished by their robust construction, space for numerous storage media, and rich I/O panels for quick connection of devices via USB 3.0 ports. Importantly, our models support a variety of motherboard standards, and practical accessories are included for easy installation. As a result, each server can be configured optimally for server operation and flexibly adapted to changing needs. ATX, E-ATX, ITX, Micro-ATX and SSI CEB motherboards supportedThe SC01-6502-12B server case is compatible with E-ATX, ATX, ITX, Micro-ATX and SSI CEB motherboards. This standard is ideal for high-performance servers and workstations based on Intel Xeon and AMD Epyc processors (X399/C600 chipsets). It provides a wide range of possibilities for component selection and scaling of computing power, allowing the creation of diverse configurations: from basic servers to advanced systems in data centers, large networks and industrial applications. Advanced cooling: 7 PWM 80 mm fansGood cooling and free airflow are key features for the proper operation of components. To ensure optimal operating temperatures for high-performance components, the SC01-6502-12B server chassis is equipped with up to 7 high-performance 80 mm PWM fans with adjustable speed (900-2600 RPM). At maximum speed, they maintain a service life of up to 50,000 hours and generate a noise level of 26.1 dB. Thanks to the perforated front with a replaceable dust filter, air flows freely through the interior, ensuring optimal operating conditions in a server room or RACK cabinet. Easy expansion with space for multiple hard drives and SSDsThe design provides, when properly configured, space for 4 2.5" drives and as many as 6 3.5" drives to create a large storage space. This configuration allows you to easily store and segregate large volumes of data, which will be appreciated especially by companies growing at a rapid pace. Solidly constructed server enclosures: durability and resistance to damageEach Lanberg server case is made of galvanized steel as thick as 1.2 mm, which definitely increases its resistance to mechanical damage. Compared to traditional solutions, such as home tower server enclosures or the less well-made some ATX server enclosures, our RACK enclosure models stand out for their additional structural rigidity. This translates into years of reliability in the operation of any server. As a result, you can rest assured that your investment will bring you long-lasting benefits and remain stable even under heavy loads. Connect multiple components to a rich I/O panelA server and a server case are a duo that requires quick access to the most important ports. That's why you'll find 2 USB 3.0 Type-A ports on the front panel of our RACK models, as well as Power and Reset buttons. This makes server management convenient and intuitive, whether you're working in a professional server room or as part of an extended setup in a small or medium-sized business. Dedicated accessories for suitable power supply and mounting in 19" RACK cabinetsLanberg server cases in this series offer a rich set of accessories: interchangeable adapters for Flex ATX, ATX, SFX power supplies, 2x PWM splitters and a key lock. With these, you can easily mount the server in a 19" RACK rack and customize the power supply. The complete accessory package means that even less experienced users can quickly get their server up and running.
MSI PRO SHIELD M100P. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Bagerste ventilatorer installeret: 1x 80 mm, Understøttede diametre for bagerste ventilatorer: 80,90 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 166 mm, Dybde: 312 mm, Højde: 354 mm. Pakkevægt: 3,58 kg
The Phanteks XT M3 impresses with its space-saving design, offering you more than enough room for high-end components. Thanks to efficient cooling and neat cable management, this case is suitable for everyone—whether you’re a casual gamer or an enthusiast. Compact size: Space-saving case for high-end hardware Effective cooling: Supports up to nine fans Large radiator: Accommodates a 360 mm radiator at the top Clean build: Space for neat cable management Back-connect support: Compatible with motherboards featuring back-connect design The Phanteks XT M3: Sleek mini case for your gaming setup Showcase your gaming hardware with the Phanteks XT M3—a compact SFF case made for big ambitions. Compatible with high-end graphics cards and motherboards with back-connect design, this tower is ready for your modern setup. Phanteks XT M3 Case with fans Efficient cooling with fans and radiator The Phanteks case supports the installation of up to nine fans, ensuring a cool build under any load. Three fans can be mounted at the bottom, directly beneath the graphics card, providing extra cooling specifically for your GPU. Additionally, a 360 mm radiator can be installed at the top if you prefer water cooling. Beyond fans and the radiator, the mesh front panel also provides excellent airflow, preventing hot air from accumulating inside your case. Your new gaming PC with clean cable management Laying out cables neatly can be tricky—but with the Phanteks XT M3, cable management is effortless. Cutouts in the right places allow you to route cables cleanly. Combined with support for motherboards with back-connect design, you'll get a tidy build that not only looks great, but also improves airflow. Mini-ITX case built for high-performance hardware Even a large graphics card is no problem—the case offers space for a GPU up to 430 mm in length. Note that you cannot install front fans if you use the full GPU length. The CPU cooler should not exceed a height of 175 mm, and the power supply should be no longer than 150 mm.
