Full Tower CTE C750 TG ARGB case The CTE C750 TG ARGB is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, motherboard side and rear of the case. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for Centralized Thermal Efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE C750 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE C750 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. We provide cooling performance beyond your imagination! The CTE C750 TG ARGB is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, rear and motherboard side. Its dual-chamber design allows users to showcase key components and provides plenty of space for excellent cooling solutions, with the ability to accommodate up to 14 fans inside the case thanks to front, bottom and rear fan brackets and a top and side M/B vent. It also has lots of little details like swivel PCI-E slots, removable filters, a pump and tank bracket, and Velcro straps for easy cable management. Whether you're looking for a case for custom liquid cooling or a dual AIO setup, the CTE C750 TG ARGB is a high-end presentation case that allows you to imagine something outside the box. Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE C750 TG ARGB's versatile interior includes two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Maximum radiator support - up to 360mm/420mm radiators in multiple locations Our CTE C750 TG ARGB offers excellent cooling support for custom liquid cooling enthusiasts, there are various support locations and enough space to arrange your own configurations. Up to 5 radiators (three 360mm and two 240mm) can be mounted simultaneously on our CTE C750, providing incredible radiator support. To ensure AIO compatibility, radiators up to 420 mm/360 mm in diameter can be installed on the front, rear and motherboard side, giving PC enthusiasts unlimited possibilities for the perfect configuration. All your dream cooling components will fit! The CTE C750 Full Tower case has a huge fan and cooler installation capacity: up to fourteen 140 mm fans and 360 mm/420 mm AIO coolers in various locations. Moreover, equipped fan brackets at the front, bottom and rear ensure easy installation of all desired cooling components. Amaze your world with three pre-installed 140 mm CT140 ARGB fans The CTE C750 TG ARGB Full Tower case is equipped with three 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance. Perfect protection against dust There are small details on the top, front, bottom, rear and right side of the housing, removable filters that provide excellent dust protection and can be easily removed for cleaning.
This is proof that the unique appearance of a computer case can go hand in hand with excellent air circulation and capacity useful when creating your own hardware configuration. Krux Vako White RGB is a white version of the legendary Vako housing without even the slightest compromise. Arctic cold inside Excellent airflow in the white Vako is ensured by three efficient, factory-installed RGB fans. They help maintain a low temperature of components, and thus promote quieter operation. Two 140 mm front fans draw cool air into the case, while one with a diameter of 120 mm exhausts it from the back. Snow Queen What undeniably distinguishes Krux Vako White RGB from other housings is its crystal white color. Such a white tower will be a great culmination of an aesthetic streaming setup, or it will better fit into the bright decor of the room. No matter how you use it, it will always soothe your eye with its cool whiteness. Aurora in the fan White is not the only visual advantage of this housing. Pre-installed zone-illuminated RGB fans enhance the appearance of both the external panels and the components inside. Their power supply and backlight are connected with 3-pin plugs, which facilitates compatibility with the power supply. Look inside Like through a crystal ball, you can look through the tempered glass side panel into the Krux Vako White RGB case and admire the beauty of your setup. Moreover, this panel is mounted on magnetic latches. Disassembly and reassembly become very simple, so you don't have to worry about scratches and breaks. Space and accessibility Krux Vako White RGB has great capacity for its size. It can accommodate an ATX motherboard up to 240 mm AIO, and next to it there can be a graphics card up to 310 mm long. There are also four places for drives, and on the floor there is space for a power supply up to 160 mm. The external, upper panel of the housing gives access to three USB ports (including one in the 3.0 standard) and the most necessary audio ports. Krux Vako White RGB - main features: Aesthetic, white casing color Two 140 mm fans behind the front panel and one 120 mm fan with back of the housing Zone RGB lighting Roomy interior Design that ensures good air circulation
MAG FORGE 320R AIRFLOW / WHITE - Supports up to 360 mm AIO liquid cooler and large 40 series GPU. - Supports up to 11 x system fans configuration, providing ventilation and stable performance to the whole system. - Built-in ARGB fans and control board, providing striking lighting and vivid lighting effects. - Tempered Glass Side Panel displays RGB lighting effects. - The Magnetic Dust Filter on the top vents being easily remove for cleaning. - Uni Front Panel Cable makes your DIY process easier. - LED Switch button provides intuitively control & 9 lighting effects.
The Phanteks NV9 MK2 is perfect for enthusiasts who want to showcase their hardware spectacularly while ensuring strong cooling performance. With its generous use of Tempered Glass and subtle DRGB lighting, you can impressively highlight your components, while the thoughtful ventilation system ensures optimal airflow. Ideal for you if you value aesthetics, functionality, and compatibility with back-connect motherboards. Elegant showcase case with excellent cooling performance Side and front panels made of Tempered Glass for a panoramic view of your hardware Optimal cooling with space for up to 11x 140mm or 12x 120mm fans Radiators possible on the top, bottom, side, and back Space for graphics cards up to 490mm in length Supports large motherboards up to E-ATX Back Connect: compatible with ASUS BTF and MSI Project Zero Space for large CPU tower coolers up to 205mm in height Integrated D-RGB lighting with built-in controller Phanteks NV9 MK2 Big Tower: Panoramic view now with Back Connect With the Phanteks NV9 MK2, you don’t compromise on cooling and presentation for your hardware. The left side panel and seamlessly integrated front are made of Tempered Glass and provide a superb panoramic view of your components. The pre-installed but subtle DRGB lighting enhances the look of the case and further highlights your hardware. Strong cooling performance for your components In developing the NV series and particularly the NV9 MK2, PHANTEKS focused on cooling the components from the start. The case is therefore designed to be very open and aimed at uninterrupted airflow. The top and part of the right side cover are made of mesh, ensuring good air throughput. The bottom is sloped and provides ample space with a maximum distance of 65mm to guide fresh air into the case. Many mounting options for better cooling The PHANTEKS NV9 MK2 offers numerous options for fan installation to optimally cool your hardware. You can accommodate a total of eleven 140mm or twelve 120mm fans, ensuring effective cooling throughout. Three fans can be mounted at the bottom on a removable frame above the dust filter. The side of the case offers space for four 120mm or three 140mm fans on another removable frame. Three fans can be installed on the top, and the back even has space for two additional fans. There is also sufficient space for extensive water cooling. On the top and bottom as well as on the side, one 420mm radiator can fit simultaneously. You can alternatively install a 360mm radiator at the bottom or the top. Additionally, a heat exchanger up to 480mm in length can fit on the side. You can also install a 240mm or 280mm radiator at the back if you want to use a smaller AiO water cooling for your GPU. Ample space for your gaming hardware If you use a large motherboard to get the most out of your system, then the NV9 MK2 is also the right choice for you. For maximum compatibility, you can easily accommodate E-ATX motherboards. Additionally, graphics cards up to 490mm in length and 205mm in width can be installed. There is sufficient space for modern, wider GPUs and 12VHPWR cables in this big tower case. For additional stability, a GPU holder is also included. The PHANTEKS NV9 MK2 also supports CPU coolers up to 205mm in height. The case also provides space for up to three 3.5-inch and two 2.5-inch drives or six 2.5-inch drives, giving you ample storage options for any data. These can be installed on a hinged frame behind the motherboard tray and directly on the back of the motherboard tray. Robust construction and well-equipped I/O panel In addition to the Tempered Glass panels, the case impresses with its construction from robust steel. The frame is well hidden by screen prints on the panels. The seamless glass panels not only provide an elegant look but also an unobstructed view of the installed components. The I/O panel features a power button, HD audio and microphone jack, as well as a USB 3.1 Type-C port and two USB 3.0 Type-A ports for fast data transfer. Additionally, there are four buttons integrated into the case for controlling the D-RGB lighting - one button for each mode, colour, speed, and channel. Each channel has two connectors where the LED strips can be attached. The modular I/O panel at the bottom front can also be mounted at the back of the case. Intelligent cable management The PHANTEKS NV9 MK2 features a sophisticated cable management system that ensures a tidy and neat appearance. Particularly notable is the back, which also has a mesh cover and offers cable channels behind it, allowing you to hide cables from the motherboard panel as well. Through a cutout with a rubber grommet, you can even route cables through the bottom of the case. This way, your NV9 MK2 has a neat and appealing look from every angle. The case also supports motherboards with Back Connect. With back-connect design motherboards like MSI's Project Zero or ASUS's BTF motherboards, the connections for power supply, data cables, and other connections are located at the back of the motherboard. This not only provides cleaner cable management in your case but also better ventilation.Specification:ColourPrimary Colour: BlackDimensionsLength / Depth: 575 mmWidth: 280 mmHeight: 615 mmCaseCase Type: Full TowerMotherboard SupportCompatible Motherboard Formats: ATX, E-ATX, Micro-ATX, Mini-ITXMax. Motherboard Format: E-ATXInternal DimensionsMax. CPU Cooler Height: 205 mmMax. GPU Length: 490 mmMax. PSU Length / Depth: 210 mmPower SupplyPSU Format: ATXPower Supply Position: rear topFan Support120 mm fan: 12140 mm fan: 11Drive Bay2.5 inch internal drive bay: 63.5 inch internal drive bay: 3External PortsUSB 3.1 (extreme) Type C: 1USB 3.0 (extreme) Type A: 2Audio output & input: 1x output/input comb. (3.5 mm jack, 4-pin, TRRS)Case FeaturesI/O Position: FrontSide Panel: with windowFilters included: YesBook ConnectBook Connect: YesBook-Connect Compatibility: ASUS BTF, MSI Project ZeroExpansion SlotsExpansion slots / PCI slots: 8MaterialMaterial: Plastic, Steel, Tempered GlassLightingLighting: YesRGB Type: ARGB / DRGBLighting Colour: RGBAdditional ContentsIncluded Fan: None
Evolv X2 Redefine the desktop computer The Evolv X2 redefines the desktop computer with its see-through glass design, aluminum interior, and powerful vertical cooling solution. The entire chassis floats above its base, drawing in surrounding air and channeling it efficiently through the GPU and CPU. Hot air is expelled through the top ventilation, enhancing thermal performance. The interior of the Evolv X2 has been carefully designed to blend with the hardware components for a fully integrated look, with all cooling components sitting flush into the top and base. The integrated lighting and high-quality aluminum internal panels add flair to your system.
Black case with a closed side Efficient cooling with up to seven fans and a radiator up to 360mm Support for large motherboards up to E-ATX and back-connect Space for graphics cards up to 415mm and CPU coolers with a height of up to 184mm Up to six drives possible Three M25-120mm fans already included PHANTEKS XT Silent: Compact and simple midi-tower The PHANTEKS XT Silent fits into any setup with its simple black design. It offers extensive options for installing your high-end hardware. To keep your system cool even at full power, there is plenty of space for fans and radiators. Effectively cooled with fans and radiators To ensure your high-end components do not overheat even under full load, up to seven fans can be installed in the midi-tower. The top supports either up to three 120mm or two 140mm fans. Additionally, three more 120mm fans can be installed on the mid-plate. The rear also allows for a 120mm or 140mm fan. Furthermore, three PHANTEKS M25-120mm fans are already included in the package. If you prefer water cooling - whether an all-in-one water cooling system or a custom-built water cooling solution - there are two locations to install a radiator. A maximum 360mm radiator can be mounted at the top, and another 120mm radiator at the rear. With these fan and radiator options, your system will not lose performance. Hardware installation The midi-tower supports the installation of large graphics cards up to 415mm in size. Consequently, the current NVIDIA GPUs of the 40 series are also possible. Motherboards up to E-ATX format can be accommodated. To avoid messy cable clutter, you can also install motherboards with back-connect. The CPU cooler should not exceed a height of 184mm. On the other hand, there are hardly any limits for the power supply, as it can be up to 270mm long. To store programs and games, up to six drives can be installed: up to three 2.5-inch SSDs can be placed on the side, two more in the power supply chamber, as well as one 3.5-inch drive.
The ASUS ProArt PA401 mid-tower chassis presents a unique wood edition design that combines aesthetics with functionality. With a robust open frame design and a windowed side panel made from tempered glass, this chassis allows for a clear view of the internal components while maintaining airflow. Equipped with integrated cable management, this chassis provides a clean and organized build space, making installation and maintenance straightforward.This chassis boasts numerous features that enhance performance and usability. It includes multiple dust filters to keep the interior clean, a PWM controller for efficient cooling, and ample space for expansion with 4 internal bays and 7 expansion slots. Supporting a variety of radiator sizes and up to 2 x 140 mm fans, the cooling system maintains optimal temperatures while ensuring quiet operation. Additionally, front panel connectors include USB and audio ports for easy access to peripherals.
The Montech X5 is a mid-tower case that combines elegant design with solid cooling performance. With a sleek front panel, tempered glass side window, and pre-installed fans, it's the ideal choice for budget-conscious PC setups. Modern mesh front panel with a clean, minimalist look Three 140mm and one 120mm fans pre-installed for instant cooling Tempered glass side window for an unobstructed view of the interior Compatible with E-ATX motherboards and GPUs up to 410 mm in length Spacious interior with tidy cable management Elegant design for any setup Enjoy high compatibility in a compact build with the Montech X5 Mid-Tower. It accommodates large GPUs, powerful cooling systems, and modern cable management—without appearing bulky. The X5 uses a simple front panel without mesh, delivering a clean overall appearance. It's especially suitable for users who value a clear, minimalist look. This case combines performance with style—the RGB lighting delivers an impressive appearance and enhances your entire setup. Whether for a gaming rig or workstation, customizable effects make your PC a real eye-catcher. Solid cooling performance with four fans Keep your components at optimal temperature with the Montech X5, the perfect choice for those who prioritize high-performance cooling. Its airflow-friendly design and optimized airflow architecture ensure ideal cooling, even during long gaming sessions or heavy system loads—a case that perfectly combines performance and cooling. Despite the closed front, four 120mm fans are already installed, providing good basic cooling right out of the box. This means you're ready to go without additional investment. Thanks to the removable dust filters, your case stays free from dust build-up. The filters are easy to clean, so your computer remains optimally cooled at all times. Easy assembly & flexible hardware support The interior offers space for standard ATX motherboards, long graphics cards, and multiple drives. Thanks to its thoughtful structure, installation is quick and straightforward, even for beginners.
The Montech X5 is a mid-tower case that combines elegant design with solid cooling performance. Featuring a clean front panel, tempered glass side window, and pre-installed fans, it is the ideal choice for budget-conscious PC setups. Modern mesh front panel with a clear, minimalist look Three 140mm and one 120mm pre-installed fans for immediate cooling Tempered glass side window for a clear view of the interior Compatible with E-ATX motherboards and GPUs up to 410mm in length Spacious interior with clean cable management Elegant design for any setup Enjoy high compatibility in a compact form factor with the Montech X5 mid-tower. It offers space for large GPUs, powerful cooling systems, and modern cable management—without appearing bulky. The X5 features a simple front without mesh that creates a tidy overall appearance. It is especially suited for users who value a clear, minimalist aesthetic. This case combines performance with style—the RGB lighting creates an impressive look and elevates your entire setup. Whether it’s a gaming rig or a workstation, with individually adjustable effects your PC becomes a real eye-catcher. Solid cooling performance with four fans Keep your components at optimal temperatures with the Montech X5, the perfect choice for those who value high-performance cooling. Its air-permeable design and optimized airflow architecture ensure ideal cooling, even during long gaming sessions or under heavy system loads—a case that perfectly combines performance and cooling. Despite the closed front panel, four 120mm fans are already installed to provide good base cooling. This means you’re ready to go without any additional investment. Thanks to the removable dust filters, your case remains free from dust deposits. The filters are easy to clean, ensuring your computer always stays optimally cooled. Easy assembly & flexible hardware support The interior offers space for standard ATX motherboards, long graphics cards, and multiple drives. Thanks to the well-thought-out structure, installation is quick and straightforward, even for beginners.
ASUS ROG Strix Helios II. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Frontventiler installeret: 3x 140 mm, Understøttede diametre for frontventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 250 mm, Dybde: 565 mm, Højde: 591 mm
Midi tower in black, supports up to eight fans, space for radiators up to 360mm, motherboards up to ATX, GPU up to 405mm, and CPU cooler up to 175mm in height, supports up to three drives The Antec P30 AIR PC case has been specifically designed for premium airflow, ensuring efficient cooling of your components. Thanks to the well-thought-out mesh panels and optimised air circulation, your PC system stays cool and performs reliably even under heavy load. Black mid-tower with built-in fans Effective cooling performance thanks to eight fan slots and radiators up to 360mm Supports motherboards up to ATX size Space for graphics cards up to 405mm and CPU coolers up to 175mm in height Antec P30 AIR: PC case with built-in fans The Antec P30 AIR mid-tower offers the perfect balance between size and functionality. With ample room for powerful hardware and efficient cooling, it is the ideal choice for gaming and workstation builds. Extensive cooling options with fans and radiators To keep your hardware cool under any load, the Antec P30 AIR can accommodate up to eight fans simultaneously. The top supports three 120mm or two 140mm fans. At the front, two 120mm or 140mm fans can be installed, while above the power supply cover there is space for two additional 120mm fans. A 120mm fan can also be mounted at the rear. An AiO water cooling system can also be easily installed if you prefer to cool your powerful hardware with liquid cooling. There is space for this at the top (up to 360mm), at the front (240mm), and at the rear (up to 120mm). Installing your hardware The case offers enough space for powerful gaming hardware. It supports graphics cards up to 405mm in length. Motherboards up to ATX format are supported. The CPU cooler should not exceed a height of 175mm. To store programmes and games, a total of three drives can be installed.
PMC-SE2Gaming Mini TowerDiscover the perfect balance between design and functionality with the MicroArtx MC-SE2. Featuring continuous, frameless tempered glass panels on the front and sides, this computer case transforms your workstation into a stylish display of your hardware. A 120mm FRGB rear fan, dual-chamber design with support for liquid cooling kits, and an optimized Airflow Mesh ventilation system ensure exceptional thermal efficiency during gaming sessions.
Das MasterFrame 600 Mesh ist ein hochwertiges Midi-Tower-Gehäuse mit offenem Rahmen für leistungsstarke Hardware, extreme Kühlung und umfassende Anpassungsmöglichkeiten. Es wurde mit Blick auf FreeForm 2.0 entwickelt, unterstützt ATX- bis E-ATX-Motherboards und bietet vollen Zugriff auf modulare Designdateien, sodass Benutzer unbegrenzt bauen und weiterentwickeln können. Das Gehäuse verfügt Platz für bis zu zehn Lüfter und mehrere Radiatorgrößen (bis zu 420 mm) und bietet so eine überragende Wärmeleistung. Die mitgelieferte GPU-Halterung verhindert ein Durchhängen der GPU und sorgt für Stabilität bei intensiven Spielen oder Hochleistungs-Workloads, wodurch eine saubere und sichere Konstruktion geboten wird.
Das MasterFrame 500 Mesh ist ein hochwertiges Midi-Tower-Gehäuse mit offenem Rahmen für leistungsstarke Komponenten, fortschrittliche Kühlung und grenzenlose Anpassungsmöglichkeiten. Es basiert auf der FreeForm 2.0-Designphilosophie, unterstützt ATX- bis E-ATX-Motherboards und bietet vollen Zugriff auf modulare Designdateien. Dank verbesserter Mesh-Panels für eine verbesserte Luftzirkulation können PC-Builder, Modder und Entwickler die Grenzen des PC-Designs erweitern. Das Gehäuse verfügt Platz für bis zu acht Lüfter und mehrere Radiatorgrößen (bis zu 360 mm) und bietet so eine überragende Wärmeleistung. Die mitgelieferte GPU-Halterung verhindert ein Durchhängen der GPU und sorgt für Stabilität bei intensiven Spielen oder Hochleistungs-Workloads, wodurch eine saubere und sichere Konstruktion geboten wird.
Das MasterFrame 600 Mesh ist ein hochwertiges Midi-Tower-Gehäuse mit offenem Rahmen für leistungsstarke Hardware, extreme Kühlung und umfassende Anpassungsmöglichkeiten. Es wurde mit Blick auf FreeForm 2.0 entwickelt, unterstützt ATX- bis E-ATX-Motherboards und bietet vollen Zugriff auf modulare Designdateien, sodass Benutzer unbegrenzt bauen und weiterentwickeln können. Das Gehäuse verfügt Platz für bis zu zehn Lüfter und mehrere Radiatorgrößen (bis zu 420 mm) und bietet so eine überragende Wärmeleistung. Die mitgelieferte GPU-Halterung verhindert ein Durchhängen der GPU und sorgt für Stabilität bei intensiven Spielen oder Hochleistungs-Workloads, wodurch eine saubere und sichere Konstruktion geboten wird.
Das Elite 600 ist ein ATX-Mid-Tower-Gehäuse für Systembauer, die Wert auf Leistung und Stil legen. Mit einem Seitenteil aus gehärtetem Glas und einem schlanken, modernen Design bietet es beeindruckendes Kühlpotenzial und unterstützt bis zu 360-mm-Radiatoren für eine effiziente Luftzirkulation. Das Gehäuse verfügt über einen USB 3.2 Gen 2x2 Typ-C Anschluss für schnelle Konnektivität und bietet reichlich Speicheroptionen, darunter Platz für eine 3,5-Zoll-Festplatte, ein 2,5-Zoll/3,5-Zoll-Laufwerk und zwei 2,5-Zoll-SSDs. Es ist für GPUs in voller Größe bis zu 425 mm ausgelegt und bietet Platz für anspruchsvolle Hardware und gleichzeitig eine klare, funktionale Ästhetik für jeden Systemaufbau.
