MAG PANO 100R PZ / WHITE - Supported ATX and Micro-ATX Back-connect motherboard. - Supports 360 mm radiator on the top, side and bottom - 270-degree panoramic tempered glass. - Pre-installed with 3 x 120 mm ARGB Reverse-blade fan at the side and 1 x 120 mm ARGB fan at the rear. - 1-to-4 ARGB-Fan control board. - Synergize with a compatible MSI motherboard through bridging with a USB 20Gbps Type-C (20Gbps) port for high speed data transmission. - Removable dust filter at the top, side and bottom being easily removed for cleaning. - UNI front panel cable make your DIY process easier and create more possibilities to your system.
Elegant midi-tower by ASUS in white, side panel made of tempered glass, removable top, 4x 140-mm fans with ARGB pre-installed, space for 1x 280/360-mm radiator, graphics cards up to 407 mm, 2x USB 3.2 Gen1 / 1x USB 3.2 Gen2x2 Type-C
MAG PANO 100R PZ / WHITE - Supported ATX and Micro-ATX Back-connect motherboard. - Supports 360 mm radiator on the top, side and bottom - 270-degree panoramic tempered glass. - Pre-installed with 3 x 120 mm ARGB Reverse-blade fan at the side and 1 x 120 mm ARGB fan at the rear. - 1-to-4 ARGB-Fan control board. - Synergize with a compatible MSI motherboard through bridging with a USB 20Gbps Type-C (20Gbps) port for high speed data transmission. - Removable dust filter at the top, side and bottom being easily removed for cleaning. - UNI front panel cable make your DIY process easier and create more possibilities to your system.
Stylischer Mini-Tower in Schwarz, große Mesh-Front für hohen Airflow, zwei vorinstallierte ARGB-Lüfter, Seitenteil aus Tempered Glass, Netzteilabdeckung mit Cutout, Grafikkarten bis 347 mm, CPU-Kühler bis 184 mm
Midi-Tower PC case in ATX form factor, made of steel and plastic, foldable side panel with magnetic closure, front made of fine mesh, GPU support up to 330 mm, suitable for 360 mm radiator
Kompaktes Thin-Mini-ITX-Gehäuse von Akasa, 1x 2,5-Zoll HDD/SSD, 2x USB 3.0 Typ A-Buchse, 2x USB 2.0 Typ A-Buchse, 2x 3,5-mm-Audio-Buchse, VESA-kompatibel
Midi-Tower in Schwarz, 4x ARGB-Lüfter vorinstalliert, Mesh-Front, Radiatoren bis zu 360 mm, Grafikkarten bis 290 mm Länge, 2x USB 3.0/ 1x 2.0, Netzteilabdeckung
Volcano Expanse T Apex ARGB Midi Black case Excellent airflow. Roomy design. 4 ARGB fans included. Convenience of installation and expansion. Gaming source Here it is - the source of gaming - the Volcano Expanse Apex ARGB Midi computer case. Because what would a real gaming computer be without a housing in which all the components can be mounted with the utmost convenience and precision? Moreover, without any of the frills found in new housings, you will find a classic in a modern version. There are plenty of practical solutions for powerful gaming computers - an easily removable front filter and one under the power supply, it is possible to install a frame for three additional fans instead of a cable organizer, plenty of space for gaming components and great air circulation. When looking for the best solutions, it is good to go back to the source. Interior design The Volcano Expanse Apex ARGB MIDI case allows you to arrange the interior in such a way that the computer is truly yours! At the height of the motherboard, there is a dedicated space for mounting a cable tray or fan frame. It's up to you to decide how to use the possibilities of arranging the interior of your computer. The tray allows you to organize the cables and keep the inside of the case tidy. This will be appreciated by people who focus primarily on aesthetics and need to keep their computer in good order. And if you are building a real gaming monster and need the best possible cooling of your components, instead of the tray you can install a frame for three additional 120 mm fans. Turn your computer into a refrigerator By unscrewing the metal element designed to organize cables, you can install a dedicated frame for fans and cool the computer even better. In the triangle of dreams The Volcano Expanse T APEX ARGB MIDI case is designed with triangle-shaped panels. Hence the letter T in the name of the housing, which comes from the word triangle. How does it differ from its twin design, Volcano Expanse S ARGB Midi? In this version, due to the different design of the panels, dust filters have been added on the side and top of the housing. And since there is no accounting for taste, the choice is yours. Whichever version you choose, it will be a great decision. Easy! Keeping your computer clean is very important. To minimize dust entering the interior, an easily removable dust filter is located at the front between the front panel and the housing. All you need to do is simply remove the front panel (you don't have to dismantle the entire front) and dismantle the filter to clean it quickly and conveniently. The use of practical solutions will be appreciated by anyone who systematically cares about the cleanliness, durability and functionality of their computer. Cleaning the front panel is easy! Lots of fans Keeping components running cool is paramount. Thanks to this, they work more efficiently and their service life increases. Factory-installed ARGB fans (3 x 140 mm at the front and 1 x 140 mm at the back) ensure good air flow, effectively cooling the graphics card and processor. However, if you want to have even greater configuration options, you can install three additional 120 mm or 2 x 140 mm fans on the top panel. Moreover, there is space on the motherboard mounting wall for three 120 mm fans after installing a special frame instead of the cable tray. In total, you can have up to 10 fans here! Water cooling The housing is suitable for water cooling installation. At the top of the case there is space for a radiator up to 360 mm. The same size cooler will also fit in place of the factory-installed fans on the front of the case. The same cooler (360 mm) can also be mounted on a dedicated frame of the motherboard wall, but its thickness cannot be greater than 52 mm. At the back, there is space for 120/140 mm water cooling. The introduced solutions are intended to create a real gaming machine for every game. And all this in a solid, airy construction. Without screws The times when you had to unscrew panels are long gone. In the Volcano Expanse case, we offer pleasant and simple solutions so that you can build your dream computer with a smile. All panels are mounted with snaps - you don't need any tools to remove the panel and conveniently install the components. Need to add RAM sticks? Blow out the dust from the interior? You can remove the panels with a smooth movement of your hand without having to unscrew them. Controller The case is equipped with an ARGB fan controller. Thanks to this, you can manage their speed and backlight. A total of 9 fans can be connected. At your fingertips The panel with USB/Audio inputs is placed at the top of the case, giving you convenient access to the connectors when the case is placed under the desk. There are 2 USB 3.0 connectors and one USB-C connector on the panel. Classically, there is also a microphone and headphone input, as well as a power button and fan control. Dust filter There is a dust filter under the power supply. You can easily remove and install the filter, which will keep your computer clean while increasing the efficiency and safety of the power supply and other installed components. It was designed for ease of assembly and disassembly, which is facilitated by structural elements equipped with magnets. Access to the filter is possible both from the front and back of the housing. Dust filters are also installed on the top and side panels. A place for your favorite games There will be plenty of space for your favorite games. The housing allows the installation of two 2.5 drives on the motherboard tray. Additionally, you can install two 3.5 mm in the power supply tunnel. With this amount of disk space, you can easily plan to install new games. Removable caps and vertical GPU mounting All PCI/PCIe expansion card caps are removable. Players will also appreciate the possibility of vertically mounting the graphics card, because the metal frame in which the caps are placed can be unscrewed.
Wall-mounted showcase case, ATX form factor, designed for custom water cooling, vertical GPU mounting, two large reservoirs, dual-loop cooling possible, radiators up to 360 mm, graphics cards up to 400 mm in length.
