Spacious midi-tower with good airflow from Montech, supports motherboards up to ATX, radiators up to 360 mm possible, front and side panel made of tempered glass, three 120 mm PWM ARGB fans pre-installed
The Lian Li Vector V100 combines stylish yet simple design with high compatibility and a special cutout for more individuality. With this desktop case, you get the perfect chassis for your next gaming PC. White midi-tower with tempered glass on the side and front Supports motherboards up to ATX form factor and with back-connect design Optimal cooling with up to nine fans and radiator support up to 360 mm Space for graphics cards up to 415 mm and CPU coolers up to 180 mm in height Four 120 mm fans with RGB lighting included Cutout with removable cover for collectibles The Lian Li Vector V100: midi-tower with a stylish design and plenty of space for hardware Express your personality with the Vector V100. Thanks to tempered glass panels on the side and front, you have an unobstructed view into your tower’s interior, while the LED strips are just the beginning of impressive RGB lighting. Make your build something special Directly behind the front of the V100 case is a cutout. Whether for figures or other collectibles—you can display your interests. If you don't need the cutout, simply cover it with the removable panel. Extensive cooling options Four 120 mm ARGB fans are already pre-installed—three reverse fans on the side and one with standard orientation at the rear. Thanks to their reversed fan blades, the sideways-mounted fans provide efficient airflow—and look just like regular fans. Additional mounting points for more fans are located on the top and bottom. If you prefer water cooling, you can also install a radiator up to 360 mm on the top panel. The dust filter at the bottom is easy to remove, so you can clean it whenever needed. Easy installation of your gaming hardware The Vector V100 offers plenty of space for your components—even high-end hardware. Thanks to support for motherboards with back-connect design and tidy cable management, your build will really stand out.
Der Inter-Tech ST-5255 ist ein 5-fach Wechselrahmen für 2,5" oder 3,5" Festplatten, der seinen Platz in drei 5,25" Schächten findet. Er unterstützt Geschwindigkeiten bis zu 6 Gb/s und bietet die Möglichkeit einer RAID- Konfiguration der verbauten Festplatten (RAID-Controller vorausgesetzt). Der Anschluss der Festplatten erfolgt über fünf einzelne S-ATA Kabel (nicht im Lieferumfang), die Stromzufuhr über zwei 4 Pin-Stromanschluss. Ein integrierter 80-mm-Lüfter sorgt zudem für eine optimale Kühlung der verbauten Festplatten.
Stylish big tower, with tempered glass, up to ten fans, space for radiators up to 360 mm, motherboards up to E-ATX, GPU up to 440 mm, and CPU up to 175 mm, up to four drives possible, dual-chamber design
Darkflash DS900WD computer case (black) + 4 fansDarkflash DS900WD is a modern solution for demanding users who value both aesthetics and functionality. The distinctive design with a panoramic design without an A-pillar, equipped with a single transparent glass wall and a wooden front, not only looks impressive, but also provides excellent visibility of components. The case is designed to provide optimal cooling, performance and versatility, while offering ease of modification and expansion of computer systems. The kit includes 4 fans.Durability and aestheticsThe Darkflash DS900WD stands out for more than just its looks. It is an enclosure built with durability in mind. The support mechanism and solid construction ensure stability and security for all computer components, which is especially important when expanding the system.Effective coolingEvery computer needs a good cooling system, and the DS900WD provides it without question. The ability to mount up to 10 120 mm fans and a large 360 mm heatsink makes the case ideal for those who expect high performance and reliability, especially during intensive use. In addition, 4 high-performance fans are included, which blend perfectly with the interior of the case.Protection and ease of useThe case is designed to protect the computer's interior from dust, which is important for maintaining cleanliness and performance. In addition, its clever design makes it easy to upgrade and expand components, which is especially useful for users who want to build exactly the system they want.Compatibility and expansionThe Darkflash DS900WD is compatible with a wide range of motherboards, including ATX, M-ATX and ITX, giving users freedom of choice and flexibility in configuring their systems. Additionally, seven PCI slots allow for further expansion and customization of the chassis. ManufacturerDarkflashModelDS900Enclosure typeMidi TowerSide panelTempered glassMotherboard standardATX, M-ATX, ITXPower supply standardATX at the bottomSlots for internal drives3.5" HDD x2, 2.5" SSD x2Expansion card slots7Max PSU length250 mmMax length of graphics card425 mmMax height of CPU cooler170 mmMax number of fans10 (120 mm) or 2 (140 mm)Fan mounting optionsTop: 120 mm fan x3 or 140 mm fan x2; Rear: 120 mm fan x1; Side: 120 mm fan x3; Bottom: 120 mm x3Water cooling mounting optionsTop: 240 / 360 mm; Side: 240 mmNumber of fans installed4Type of installed fansARGBButtons and controlsPower, Reset, LEDConnectorsUSB 3.0 x1, USB2.0 x2, HD AudioMaterialTempered glass, 0.5 mm SPCC, woodColorblackHeight454 mmWidth218 mmDepth434 mmWeight6.53 kg
Zalman P60 BLACK Der Zalman P60 black st ein stilvoller ATX-Mid-Tower, der modernes Design mit leistungsfähiger Kühlung kombiniert. Das schwarze Gehäuse mit großflächiger, duchgehend gebogener Glasseitenwand und fünf vorinstallierten ARGB-Lüftern bietet es sowohl Ästhetik als auch Funktionalität – ideal für Gamer, Content-Creator und PC-Enthusiasten, die Wert auf Optik und Performance legen. Die Easy-Release-Laschen an der gehärteten Glasscheibe ermöglichen eine einfache Montage, ohne dass neue Fingerabdrücke auf dem Glas hinterlassen werden! Hauptmerkmale Moderne ATX/Micro-ATX/Mini-ITX-Kompatibilität – das Gehäuse unterstützt alle gängigen Mainboard-Formate. Elegantes schwarzes Finish mit gehärtetem Glas auf der linken Seite und teilweise frontseitiger Glasoptik – perfekt zur Präsentation der Komponenten. 5 ARGB-Lüfter (3 seitlich, 2 hinten) bereits vorinstalliert – sorgt für hervorragende Frischluftzufuhr und effektiven Luftaustausch. Großzügige Kühl- und Erweiterungsmöglichkeiten: maximale Grafikkartenlänge bis ca. 435 mm, CPU-Kühlerhöhe bis ca. 170 mm, Netzteil bis ca. 180 mm Länge. Vielseitige Radiator- und Lüfteroptionen: z. B. Top: 120mm/140mm/240mm/280mm/360 mm; Bottom: bis 360mm möglich – somit auch Wasserkühlungen realisierbar. Front-I/O mit USB Typ-C, zwei USB 3.0 Anschlüssen sowie Audio- und Reset-/LED-Kontrollen – für moderne Peripherie. Mesh-Design an Top, Seiten und Unterseite für verbesserte Luftzirkulation und geringere Temperaturen. Der P60BLACK überzeugt auf mehreren Ebenen: Design & Ästhetik: Die schwarze Lackierung kombiniert mit einer großflächigen Glas-Seitenwand setzt Ihre Hardware in Szene. Das klare, kantige Design verleiht dem Gehäuse eine moderne Optik. Kühlleistung: Dank fünf vorinstallierter ARGB-Lüfter beginnt die Luftzirkulation von der Seite (3 x Seitenansaugung) und endet hinten (2 x Ausblasung) – so wird ein durchgängiger Luftstrom erzeugt. Optional lassen sich oben und unten weitere Radiatoren oder Lüfter montieren. Komponentenfreundlichkeit: Mit einer maximalen Grafikkartenlänge von etwa 435 mm und einer CPU-Kühlerhöhe von bis zu rund 170 mm haben Sie genügend Freiheit für leistungsstarke Komponenten. Modernes Front-Panel: USB Typ-C, USB 3.0, Audioanschluss sowie LEDs lassen keine Wünsche offen – ideal, wenn Sie z. B. externe SSDs oder moderne Headsets anschließen möchten. Flexibilität: Ob schlanke Arbeitsmaschine, leistungsfähiger Gaming-PC oder kompakte Content-Creator-Workstation – die Unterstützung von ATX, mATX und Mini-ITX macht den P60 vielseitig einsetzbar. Einfache Montage: Die durchdachte Innenraumstruktur, inkl. grober Kabelführung und großen Öffnungen, erleichtert den Einbau – auch für weniger erfahrene Nutzer.
The HYTE X50 is a stylish midi-tower case designed for demanding PC enthusiasts who want to combine design and functionality. With its innovative internal structure and high-quality workmanship, it targets gamers, streamers, and builders with an eye for detail. Three-chamber layout separates heat sources for optimal airflow Supports up to ten 120 mm RGB fans for exceptional cooling performance 360 mm radiator support on the top and bottom for powerful water cooling Panoramic glass side panel showcases your setup Magnetic cable management system for clean, effortless builds HYTE X50: Innovative cooling concept with clear separation The HYTE X50 utilizes an intelligent three-chamber design that physically separates the GPU, motherboard, and power supply. This allows for unobstructed airflow that efficiently expels heat from the case. With direct airflow to your graphics card, you can keep it cool even in graphically demanding games or during 3D rendering, ensuring it gets consistent air supply. Design meets functionality The case impresses with a curved glass side panel that elegantly showcases your system. The clean, symmetrical design is not only an eye-catcher but also thoughtfully constructed. Radiators up to 360 mm can be installed at the top and bottom, making room for even high-end water cooling systems. Modular interior and easy installation Building your system is made easy thanks to thoughtful features such as magnetically closable cable guides, tool-less front and side panels, and flexible mounting options. In addition, the USB-C port on the front offers lightning-fast access with speeds up to 20 Gbit/s—ideal for modern peripherals and rapid data transfers.
The HYTE X50 is a stylish midi-tower case designed for demanding PC enthusiasts who want to combine design and function. Its innovative internal structure and high-quality build make it perfect for gamers, streamers, and builders who pay attention to detail. Three-chamber layout separates heat sources for optimal airflow. Supports up to ten 120 mm RGB fans for exceptional cooling performance. 360 mm radiator support on both the top and bottom for powerful water cooling. Front and side panels made of mesh for optimal fresh air intake. Magnetic cable management system for effortless, clean builds. HYTE X50: Innovative cooling with clear separation. The HYTE X50 utilizes an intelligent three-chamber design that spatially separates the GPU, motherboard, and power supply. This creates unobstructed airflow, efficiently exhausting heat from the case. With a direct stream of fresh air to your graphics card, you keep it cool even during graphically intensive games or 3D rendering, ensuring a constant supply of air. Design meets functionality. The case impresses with a curved mesh panel on the side, reliably supplying your system with air. Its clean, symmetrical design is both visually striking and thoughtfully constructed. Radiators up to 360 mm can be installed at the top and bottom, providing space for high-end water cooling setups. Modular interior and easy installation. Building your system is made extremely easy by thoughtful details such as magnetically sealed cable guides, tool-free front and side panels, and flexible mounts. Additionally, the USB-C port on the front offers lightning-fast access with up to 20 Gbit/s — ideal for modern peripherals and fast data transfers.
Das IT-6516 MicroATX-Gehäuse kombiniert platzsparendes Design mit moderner Ausstattung und flexiblen Erweiterungsmöglichkeiten. Es eignet sich perfekt für kompakte Office-Systeme, Multimedia-PCs oder kleine Workstations, die dennoch nicht auf leistungsfähige Hardware und hohe Konnektivität verzichten wollen. Dank USB-C 3.2 Gen2 mit 10 Gbit/s profitieren Sie von blitzschnellen Datenübertragungen. Ergänzend sorgen USB-C 3.2 Gen1, USB-A 3.2 Gen1 und USB-A 2.0 für volle Anschlussvielfalt – sowohl für aktuelle Geräte als auch bewährte Peripherie.
Antec FLUX REAR. Form factor: Midi Tower, Type: PC, Product color: Black. Front fans installed: 2x 140 mm, Supported diameters for front fans: 140 mm, Rear fans installed: 1x 140 mm. Supported HDD sizes: 2.5", 3.5". Width: 240 mm, Depth: 460 mm, Height: 460 mm. Package weight: 9.72 kg
Float in Form. Flow in Function.The CFV235 is a new kind of PC case featuring the innovative Central Floating Ventilation (CFV) structure. This divides the PSU cabin and main chamber, retooling the open space in between as a cooling advantage by accessing extra ventilation. An optimal combination of a full panoramic view, compact footprint and architecturally-enhanced cooling, the CFV235 empowers airflow beyond ordinary dimensions.Central Floating Ventilation free-floating separation provides a unique visual identity.True floating void adds an extra dimension of airflow across 270° of access.The Aurora RGB lighting strip brings the awe and glory of RGB lighting to the free-floating space.COUGAR Unity 240 single-frame PWM reverse-blade fans are preinstalled on the motherboard side.Accommodates a maximum GPU length of 430mm.Compatible with Reverse Connector / Mini ITX / Micro ATX / ATX / CEB motherboards.USB 3.2 Gen 2×2 Type-C (20 Gbps) x1, USB 3.0 Type-A x 2, 4 pole headset audio jack for versatile device connectivity.Houses 2 x 3.5” HDD drives and 2+2 2.5” SSD drives (converted from 3.5” drive bays)
With the USB-A to USB-C adapter IB-CB015 from ICY BOX you can also connect the latest devices to your computer via the well-known USB-A port. The USB-C 3.2 (Gen 2) adapter transfers data at a breakneck speed of 10 Gbit/s. If you are looking for an extremely compact helper for everyday work, you have come to the right place. The USB-C adapter is so small that it will fit in any pocket. The adapter is the right tool for everyone as it is compatible with Windows and macOS. No driver installation required. The USB-C adapter is ready for immediate use. Adapter type Color: black EAN 4250078166474 Manufacturer number 60321 Data transfer area Connection 1x USB-A (plug) 1x USB-C (socket) USB 3.2 Gen 2 protocol (10 Gbit/s) The USB 3.2 Gen 2 designation corresponds to the previous USB 3.1 Gen 2 / USB 3.1 designations Features External adapter, USB C plug can be used on both sides Plug & Play function, no driver installation required
Eesmine paneel ehtsast puidust ja karastatud klaasist • Kahe sektsiooniga konstruktsioon parandab õhuringlust ja korda • Toetab kuni 410 mm pikkuseid graafikakaarte • Ruumi mitmele 360 mm jahutile ja 9 ventilaatorile • USB 3.2 Gen 2x2 Type-C port eesmisel paneelil
The Lian Li O11 Vision-M is a compact mATX PC case for current hardware and a visually appealing showcase build. Thanks to the dual-chamber design, the power supply, drives, and cables remain in the second chamber, while the front gives you an unobstructed view of the motherboard, graphics card, and your coolers. Three tempered glass panels create a panoramic look without a distracting support bar blocking the view.mATX dual-chamber PC case: Tidy build with a separate chamberTriple tempered glass: Front, side, and top with lock-and-key mechanismGPU and slot freedom: 5 PCIe slots and support for graphics cards up to 410 mm longAirflow & water cooling: Up to 12 fans and a 240/360 mm radiator in the topCustomizable design: Custom layout, cover for screen/LCD, STL file for 3D printing a dividerLian Li O11 Vision-M mATX case: Space for Mini-ITX, Micro-ATX, and high-end GPUsO11 Vision-M frontDespite its compact size, the O11 Vision-M offers room for Mini-ITX and Micro-ATX motherboards. With five PCIe slots, there is enough space for a large graphics card. Even long custom designs are no problem: GPUs up to 410 mm in length are supported. In the second chamber, you can fit an ATX power supply up to 182 mm long. There is also space for up to three drives there - ideal for keeping the power supply, storage, and cables out of sight.Triple tempered glass PC case: Panoramic showcase with lock-and-keyGlass on the front, side, and topThe front, side, and top are made of tempered glass. The panels are locked together using a lock-and-key mechanism and do not require an additional support in the corner. This gives the interior an open look and provides a clear view of your components.To prevent heat buildup despite the glass top, it features a large mesh cutout. This area is designed to reliably vent warm air upward - especially useful with fans or a radiator installed in the top.240/360 mm radiator in the top and well-thought-out tube routing for AiOsThere is space in the top for a 240 mm or 360 mm radiator. The radiator mount features integrated tube routing, allowing you to route your AiO tubes upward and over the motherboard. This keeps the GPU, RAM, and showcase area free of hoses running across them.Airflow in the Lian Li O11 Vision-M: Up to 12 fans for powerful coolingUp to 12 fans in total (distributed across the main and rear chamber)Top: 3x 120 mm (or 240/360 mm radiator)Bottom: 3x 120 mmSide: 2 fan mountsRear: 2 fan mountsFor cooling your hardware, the O11 Vision-M relies on numerous mounting points and a sensible fan layout. At the bottom, you can use 3x 120 mm as intake to supply fresh air directly to the graphics card. At the top, 3x 120 mm can be used as exhaust - or you can install a radiator for CPU water cooling. The side and rear positions allow you to fine-tune the airflow depending on your build.Rear-chamber cooling with pre-installed fanIn the rear chamber, there is a removable bracket that can simultaneously accommodate 1x 140 mm fan and 2x 120 mm fans. This is useful if you want additional exhaust or targeted airflow in the second chamber without changing the look of the main chamber.Customizable elements in the O11 Vision-M: Cover, screen options, and 3D-printed dividerCover with screen optionFor custom builds, the case offers a changeable layout and a removable cover that visually conceals a top-mounted AiO. The cover is prepared so that you can neatly integrate either a Lian Li 8.8-inch Universal Screen (sold separately) or another slim display. Alternatively, it can be replaced with a Lian Li 9.2-inch LCD kit.The screen/LCD options are configured via L-Connect 3, for example for system stats or custom animations, and can also be used as a second display if needed. In addition, Lian Li provides a free STL file for creating a 3D-printable divider. This allows you to visually close the gap between the top edge of the motherboard and the AiO, making your build look even more uniform.
The IPC SC-4004 is a case built for Mini-ITX Mainboards and has a quadruple Hot-Swap-frame for HDDs. A serial 120mm fan in the back of the case ensures a reliable and optimal cooling.The power supply inside the IPC SC-4004 is an optional Flex-ATX PSU which is mounted upright in the right part of the case. Also the case offers the option of an additional plug-in card (for example graphic card).KujutegurSmall Form Factor (SFF)TüüpPCMaterjalTeras3,5" lahtrite arv4Emaplaadi toetatud kujuteguridMini-ITXToote värvMustAknagaEi2,5" salvede arv5Sisemiste 2,5" salvede arv1Materjali paksus1 mmLaienduspesade arv1Toetatud elektritoite tarne vormi faktoridATXUSB 3.0 (3.1 Gen 1) A-tüüpi portide hulk1AudiosisendEiAudioväljundEiInstallitud tagaventilaatorid1x 120 mmToetatud tagaventilaatorite läbimõõt120 mmToetatud kõvakettasuurused2.5,3.5"Toetatud kõvaketaste arv5KäigultvahetusJahLED-indikaatoridTegevus, HDD, VõimsusLaius220 mmSügavus260 mmKõrgus190 mmKaal3,87 kgPakendi laius270 mmPakendi sügavus335 mmPakendi kõrgus280 mmPakendi kaal4,44 kg
No. of drive bays: 6 Dimensions: 455 x 205 x 475 mm Weight: 5.27 Other features: - Side panel with window YES- Filter under the YES power supply- Filter on the upper panel YES- Filter on the front panel YES- Steel thickness: 0.7 mm- Space for PSU: 240 mm- Rubber flanges for cable entry holes- All herrings twisted in place of the broken ones- The radiator can not be installed on the front panel
