The CORSAIR FRAME 4000D RS ARGB is a fully-modular and spacious mid-tower PC case featuring InfiniRail™ Fan Mounting System and compatible with reverse connector motherboards.Includes: Fully-modular design for next-level customization InfiniRail™ Fan Mounting System for easier building Includes three RS120 ARGB performance fans Dual 360mm radiator support GPU anti-sag stabilization arm Compatible with reverse connector motherboards
ASUS Prime AP303 Mesh. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Bagerste ventilatorer installeret: 1x 120 mm, Understøttede diametre for bagerste ventilatorer: 120 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 215 mm, Dybde: 485 mm, Højde: 425 mm. Pakkebredde: 285 mm, Pakkedybde: 571 mm, Pakkehøjde: 465 mm
Housings are our middle name. We've been on this topic for years and it's hard to impress us, but the sight of ENDORFY Arx 500 ARGB gives us goosebumps. It's out of pride - although some say it's because of the low temperature inside the housing. We have included our best solutions (including 4 Stratus 140 PWM ARGB). As a result, you get one of the largest (486×228×429 mm, i.e. slightly shorter than the Arx 700 series) ENDORFY cases - with room for a tall cooling system (up to 179 mm), 7 fans and most available graphics cards (up to 350 mm ). The outside is also great - with a tempered glass window and front and top panels that act as filters, our ENDORFY Arx 500 ARGB can become a housing master. Come get some fresh air! We all know that long hours at work and on the battlefield (yes, there is a difference) = welded components that beg for a break over time. With Arx 500 ARGB you don't have such actions - the casing helps keep them pleasantly cool even when you remove the components from the factory. This is due to the spacious interior, which can accommodate up to 7 fans. Additionally, the housing panels act as filters - so you don't need additional protection against dust. Compared to traditional solutions, this single layer allows for better air circulation and makes it easier to keep the components in a pleasant draft (because cooling is extremely important to us). Lord of the winds When you look inside the Arx 500 ARGB, you immediately see that there is a specific team of cooling fans working inside. We packed 4 Stratus 140 PWM ARGBs in it, created in cooperation with Synergy Cooling, so you can be sure of adequate airflow and low temperature. Because winter never surprises us. The Stratus 140 PWM ARGB is our favorite. It's 14 cm tall, has an optional semi-passive mode and a durable FDB bearing, so you can count on quiet and smooth operation even in extreme conditions. We also added a splitter to control the fan speed using a PWM signal from one motherboard connector. With such a package you are like a real ruler of the storms. Panels with filters If we were to talk about the best option in the Arx 500 ARGB, in our opinion, we would choose excellent ventilation. This is provided, among others, (right after great fans) by panels made of finely perforated sheet metal. Some people will probably say that they can be replaced with put-on filters, but the truth is that the double anti-dust layer limits the air flow like metal armor in LARPs. And no one likes to have welded... components. That's why we made sure that the panels (front and top) in our case act as filters. This single protective layer makes the inside of the case as cool as a winter morning, and you don't have to install additional dust protection. Additionally, you can remove each filter and clean it with a cloth or a vacuum cleaner (or rinse it under running water) and it will take you literally a moment. Mister of casings We've already said it, but we'll say it again if there's ever a Mr. Housing election, the Arx 500 ARGB has a chance to make it to the podium. All we need to do is turn on the ARGB-lit fans inside and the title is ours. The tempered glass side highlights them like a dream. Everything's all right! If someone asked us to describe the Arx 500 ARGB in three words, we would say: Everything is fine! It's literally one of our largest cases, so it easily fits everything that's most important to you. Of course we mean components. Arx 500 ARGB is 486×228×429 mm, so you can pack a lot inside, for example a tall cooling system (up to 179 mm), 7 fans (including 4 you get from us at the start) and most graphics cards available on the market (up to 350 mm). There will also be a large power supply, you can mount it in the position that is most convenient for you. Its installation is not a philosophy, because we have added, among other things, a dedicated mounting frame. Light in the housing Equipment without a backlight is ok, but it's nice to see a light in the housing sometimes. With Arx 500 ARGB you have the option of just one click (the RESET button on the top of the housing is responsible for control) and your components will be illuminated with a cosmic glow. Thank your ARGB fans for that. Thanks to 4 Stratus 140 PWM ARGB lights (we installed them in the housing for you), you can freely configure the backlight. You can set them up in just a moment thanks to the built-in PWM and ARGB controllers - everything is immediately connected into one working whole, compatible with ENDORFY products with the ARGB mark (and compatible products from other manufacturers), so you can easily synchronize the backlight of the entire set based on Arx 500 ARGB. Even if it's your first assembly ever.
The H5 Flow features a perforated front panel to generate an extra dimension of airflow for maximum cooling potential. With optimized thermal performance and intuitive cable management, the H5 Flow is an ideal chassis for most builds.
INVADER X MINI MID-TOWER CHASSIS INVADER X MINI MINI CASE, MAX VIEW XPG INVADER X MINI, as the most compact PC case in the INVADER X family, offers the opportunity to build your own compact, sleek, and powerful gaming rig. Compatible with ATX motherboards and comes with 5 ARGB fans, INVADER X MINI offers impressive compatibility and captivating lighting displays with optimal airflow.
STARKER AIR BTF MID-TOWER CHASSIS STARKER AIR BTF STYLE. AIRFLOW. PERFORMANCE. XPG STARKER AIR BTF is the ultimate ATX PC case, crafted for extreme gamers seeking top-tier performance and design. It supports both standard E-ATX motherboards and ATX reverse-connector motherboards, offering versatility for various build configurations. With room for 360mm radiators and up to 12x 120mm fans, it ensures superior airflow and ventilation, keeping high-end components cool during intense gaming sessions. This PC case is built for those who demand both exceptional functionality and bold, cutting-edge design in their setups.
Experience peak performance and vibrant RGB within an innovative compact dual-chamber. Prioritizing GPU cooling, the H6 Flow's panoramic glass showcases the interior while freeing up space for improved airflow. Wraparound glass panels with a seamless edge provides an unobstructed view of the inside to highlight key components. Compact dual-chamber design improves overall thermal performance and creates a clean, uncrowded aesthetic. Includes three pre-installed 120mm RGB fans positioned at an ideal angle for optimal out-of-the-box cooling and vibrant RGB lighting. The top and side panels feature an airflow-optimized perforation pattern to enhance overall performance and filter dust. An intuitive cable management system simplifies the build process by using wide channels and straps. Tool-free access to the top and side panels makes upgrading quick and convenient. Top panel supports radiators up to 360mm in length. Up to 365mm GPU and 200mm PSU clearance. Compact Dual-Chamber Improves cooling performance and creates an uncrowded aesthetic. Colorful Cooling 3 x 120mm RGB fans are angled for optimal out-of-the-box cooling with vibrant RGB lighting. High Performance Airflow Perforation pattern on the panels is optimized for maximum airflow. Cable Management Easily manage cables with the wide channels and included straps. Tool-Free Entry Access the top and side panels without tools for quick upgrades. Spacious Support Up to a 360mm radiator in the top and clearance for a 365mm GPU.
The NZXT H5 Flow RGB chassis is designed to provide a mid-tower form factor with practical features for gamers and PC builders alike. Its airflow-optimized mesh design enhances cooling performance while the included RGB fans add a vibrant touch to your setup. The side panels are toolless, making it easy to access components, and the cable management system with 28 mm clearance helps maintain a clean interior. With a windowed tempered-glass side panel, the NZXT H5 Flow RGB showcases internal components beautifully. It supports multiple internal bays, allowing for versatile storage options and accommodating long graphics cards up to 410 mm. The chassis also offers excellent cooling support with compatibility for various fan sizes, including a radiator for effective heat dissipation.
PURE BASE 501 DX | MidiTower | PSU Not included | Fan at top 1x Pure Wings 3 140mm PWM White; Fan at front 1x Pure Wings 3 140mm PWM White; Fan at rear 1x Pure Wings 3 140mm PWM White | Dimensions 450 x 231 x 463
Xtender VG (White) | PSU Not included | 2x P12 Pro A-RGB (pre-installed at rear), 3x P14 Pro Reverse A-RGB (pre-installed at side) | Dimensions 529 x 231 x 529 mm
The Lian Li DAN Cases A3-mATX Wood Edition in black combines modern design with an elegant walnut wood front panel. Thanks to excellent airflow through mesh panels, flexible configuration options, and space for high-end hardware, this case is the ideal choice for those seeking performance and style in a compact format. Perfect for demanding builds with a personal touch! Micro-ATX case by Lian Li in collaboration with DAN Cases Elegant front cover made from premium walnut wood and side panel of tempered glass Mesh panel on the top for excellent airflow Flexibly customizable: Let your imagination run wild Outstanding cooling thanks to space for 360 mm radiators Suitable for motherboards in Micro-ATX or Mini-ITX form factors Supports various power supplies from SFX to ATX A touch of luxury: The Lian Li DAN Cases A3-mATX Wood Edition in black If you're looking for a small form factor case for high-performance PC hardware, you should take a closer look at the Lian Li DAN Cases A3-mATX Wood Edition. This case combines a minimalist design with premium features: the elegant walnut wood front gives your setup an exclusive touch. With a capacity of about 26 liters, this Micro-ATX case is compact and space-saving. At the same time, the A3-mATX Wood Edition is perfect for high-end PC components, offering effective cooling despite its small size. With plenty of room for fans and radiators and generous ventilation openings, this mini tower easily meets the demands of powerful hardware. Flexibility meets performance: The fan and cooling options of the Lian Li DAN Cases A3-mATX Wood Edition The Lian Li DAN Cases A3-mATX Wood Edition offers space for up to 10 fans in the 120 mm format. These can be distributed as follows: three on the top, three on the side, three on the bottom, and one on the rear. Alternatively, two 140 mm fans can be mounted on both the top and side. With 25 mm thick fans on the case bottom, the GPU’s height is limited to 61 mm (3 slots). CPU air coolers can be up to 165 mm tall. Lian Li and Daniel Hansen also considered water cooling when developing the A3-mATX: A radiator can be installed in three locations inside the case: either a 360 mm (triple radiator) or 280 mm (dual radiator) on the top or the side. You must choose one of these two positions. The bottom of the case accommodates an additional 240 mm radiator. If you mount the fans below the radiator, you can even install a 360 mm radiator. Customizable configuration: The versatile possibilities of the Lian Li DAN Cases A3-mATX Wood Edition The Lian Li DAN Cases A3-mATX is suitable for a motherboard in Micro-ATX or Mini-ITX form factor. Unlike a Mini-ITX case, the PC case offers four expansion slots, allowing you to install a graphics card up to 4 slots tall and up to 415 mm long. You can install two 2.5-inch SSDs on a bracket. You can also install a 3.5-inch HDD or another 2.5-inch drive at the bottom of the case. You have the choice between an ATX, SFX-L, or SFX power supply, which you can mount flexibly at the front or side to create more space for your graphics card or the radiator—just as you prefer. In general, the smaller the power supply in the A3-mATX, the more room you have for the rest of your hardware. The I/O panel on the front of the Lian Li DAN Cases A3-mATX Wood Edition features two USB 3.0 Type A ports, one USB 3.1 Type C port, two 3.5 mm audio jacks (Mic-In/Audio-Out), and a power button. Note: The Lian Li DAN Cases A3-mATX Wood Edition offers numerous configuration options, but space inside this case is limited. The size and position of the power supply are crucial in selecting the right PC components. Therefore, we recommend careful planning using the manual in advance.
Die North Momentum Edition ist eine neue, leistungsorientierte Version des ikonischen North-Gehäuses und ermöglicht verbesserte Kühlung direkt ab Werk. Das charakteristische offene Holzfront-Design und die fein gemusterte Mesh-Belüftung werden durch drei leistungsstarke Momentum-12-Lüfter mit LCP-Lamellen für einen leisen und effizienten Luftstrom ergänzt. Eine Front aus geschwärzter Eiche in Kombination mit dunklen Metallakzenten erzeugt eine stimmige, komplettschwarze Optik, die sich nahtlos in jedes Gaming-Setup einfügt. Im Innenraum bietet das geräumige und durchdachte Layout des Gehäuses Unterstützung für Grafikkarten bis zu 355 mm Länge oder 300 mm bei Verwendung eines 360-mmFrontradiators. Dadurch ist das North Momentum Edition die ideale Basis für leistungsstarke Gaming-Systeme.
Experience peak performance within an innovative compact dual-chamber. Prioritizing GPU cooling, the H6 Flow's panoramic glass showcases the interior while freeing up space for improved airflow. Wraparound glass panels with a seamless edge provides an unobstructed view of the inside to highlight key components. Compact dual-chamber design improves overall thermal performance and creates a clean, uncrowded aesthetic. Includes three pre-installed 120mm fans positioned at an ideal angle for superb out-of-the-box cooling. The top and side panels feature an airflow-optimized perforation pattern to enhance overall performance and filter dust. An intuitive cable management system simplifies the build process by using wide channels and straps. Tool-free access to the top and side panels makes upgrading quick and convenient. Top panel supports radiators up to 360mm in length. Up to 365mm GPU and 200mm PSU clearance Compact Dual-Chamber Improves cooling performance and creates an uncrowded aesthetic. Out-of-the-Box Cooling 3 x 120mm fans are angled for optimal out-of-the-box cooling. High Performance Airflow Perforation pattern on the panels is optimized for maximum airflow. Cable Management Easily manage cables with the wide channels and included straps. Tool-Free Entry Access the top and side panels without tools for quick upgrades Spacious Support Up to a 360mm radiator in the top and clearance for a 365mm GPU.
