Elegant midi-tower in white, side doors made of tempered glass, addressable RGB LED lighting, space for 2x 360 mm radiators, maximum 420 mm radiator, supports graphics cards up to 435 mm long, extensive water cooling support, and three pre-installed fans.
MAG FORGE M100R | Max. GPU lenght: 300mm; Max CPU Cooler height: 160mm; Max PSU Lenght: 300mm | Micro | PSU Not included | Front: 3 x 120mm Rear: 1 x 120mm (Front: 3 x ARGB Fan Rear: 1 x ARGB Fan) | Dimensions 388 x 200 x 423mm
Stilvolles ATX-Gehäuse mit gutem Airflow, mit luftdurchlässiger Mesh-Front, großes Seitenteil aus Temperglas, vier vorinstallierte 120-mm-ARGB-Lüfter, inklusive RGB-Controller, Grafikkarten bis 340 mm und CPU-Kühler bis 161 mm, 2x 3,5 oder 2x 2,5 Zoll, Front I/O mit 2x USB 3.0 und 1x USB 2.0
Shadow X2 Case Mesh Mesh front panel. Tempered glass hinged side door. Effective component protection and excellent component cooling. Set of dust filters. Wide compatibility with AIO water cooling systems. 4 x 120 mm fans included. Modern design. ATX MID-Tower Case Shadow X2 has dimensions of 407 x 211 x 455 mm, a Mesh front, and tempered glass hinged side doors. Thanks to this type of design, it looks very modern and provides great convenience. The dimensions of the hardware allow for the installation of an integrated liquid cooling system of 120, 240, or 360 mm on the front. There is also an optional 120 or 240 mm cooling option on the top of the case. What's more, the case accommodates standard CPU air cooling with a height of no more than 160 mm. Thanks to these dimensions, vertical mounting of the GPU graphics card is possible. 4 fans included with the PWM option The Shadow X2 Savio Case comes with 4 120mm fans with PWM control. They are characterized by performance, durability, and quiet operation. You can easily control them using motherboard-dedicated tools in the operating system or from BIOS/UEFI. In practice, this means that their speed can be adjusted over a wide range, typically from 10 -100%, while keeping noise levels low. I/O ports located on the top of the chassis The Shadow X2 has an I/O panel that features standard Power ON, Reset buttons, one USB 3.0 port, two USB 2.0 ports, HD Audio input, and output, as well as an additional RESET/LED button dedicated to controlling lighting effects. Multitasking interior The Case is characterized by high ergonomics, trouble-free installation and versatility. Its output parameters are a compromise between high performance and modern character. Importantly, you can expand the hardware at any time by adding, for example, more fans, water cooling, or other modules. The great advantage of Shadow X2 from Savio is that it accepts such parameters as you set for it. Specifications: Case Type: ATX Mid-Tower. Motherboard Compatibility: ATX, mATX, ITX, E-ATX. Supported disk formats: 2(1) x 3.5" HDD; 2(3) x 2.5" SSD. I/O ports: 1 x USB 3.0; 2 x USB 2.0; HD audio. Side panel: tempered glass. Maximum VGA length: 340 mm (vertical). Maximum CPU cooling height: 160 mm. Supported power supply types: all types of standard/semi-modular and modular power supplies. PCI expansion slots: 7 Dust filter: 1 x top, 1 x bottom (PSU), 1 x front. Fans included: 4 x 120 mm PWM, 4 pin, 800 - 1800 RPM (3 x front, 1 x rear). Supported fans:- front: 3 x 120/140 mm or 2 x 200 mm- rear: 1 x 120 mm- top: 2 x 120 (140) mm- bottom: 2 x 120 mm Water cooling support:- front: 1 x 120/240/360 mm- rear: 1 x 120 mm- top: 1 x 120/240 mm Product dimensions: (L x W x H) 407 x 211 x 455 mm. Housing material: SPCC 0.6 mml Front panel material/material: Metal mesh with small holes. Net/gross weight: 5.1/6.2 kg.
Tootekood: AIR 100 LITE (B)GTIN: 4710562740691Korpused
Small midi tower with tempered glass on the side, up to eight fans, space for a radiator up to 280mm, motherboards up to Micro-ATX, GPU up to 330mm and CPU cooler up to 161mm in height, up to four drives possible, two 120mm fans includedSmall case with tempered glass side panel Efficient cooling options with up to eight fans and radiators up to 280mm Support for motherboards up to Micro-ATX Space for graphics cards up to 330mm and CPU coolers with a height of up to 161mm Up to four drives possible Two 120mm fans included The Montech AIR 100 LITE: Minimalist case with high cooling performance The Montech AIR 100 LITE is the smaller variant of the Montech AIR 100 and impresses with its lightweight and minimalist design. Nevertheless, this midi tower offers extensive options for installing your hardware - particularly a variety of fans to keep your system cool. Well-cooled with fans and radiators Despite its small size, up to eight fans can be installed in the tower. The front supports a maximum of three 120mm or two 140mm fans. You can install two 120mm or 140mm fans at the top. A further 120mm fan can be installed at the rear, as well as up to two more 120mm fans above the power supply chamber. Two 120mm fans are already included at the front and rear. If you prefer water cooling - whether an all-in-one water cooler or a custom-built water cooling system - there are several locations where a radiator can be installed. The front supports a radiator up to a maximum of 280mm, the top supports a 240mm radiator, and another 120mm radiator can be installed at the rear. Hardware options The midi tower supports the installation of graphics cards up to 330mm in size. Motherboards up to Micro-ATX format are feasible. The CPU cooler should not exceed a height of 161mm. To store programs and games, up to four drives can be installed.
The Fortron FSP Geh Mini CST360 B is a sleek and compact computer case designed to accommodate both Micro-ATX and Mini-ITX motherboards. Crafted by Fortron, a brand known for its quality and durability, this case is a perfect blend of functionality and style. Its black color adds a touch of elegance to any setup, making it a great choice for both office and home environments. Despite its compact size, it offers ample space for component installation and efficient cable management, ensuring a neat and organized build.
PC case Mars MC-XO ATX FRGB fan black The MC-XO is an ATX semi-designed for those who seek the perfect balance between performance and aesthetics. With an optimized design for refrigeration, it incorporates a 120mm rear FRGB fan, a double-chamber system for efficient thermal management and the innovative Sidecool system, which maximizes the side air flow without compromising clean aesthetics and sophisticated from the box. Its modern and functional design makes it an ideal choice for game and professional setups.
Midi-tower case with four pre-installed D-RGB fans 360 mm radiator support on the top for optimal cooling performance Compatible with ASUS BTF and MSI Project Zero motherboards Tempered glass side window for an unobstructed view of your components Glacier One 360M25 Gen2 with powerful pump and RGB lighting Three quiet M25-G2 fans with high static pressure Integrated VRM fan on the pump cover High-quality build and optimized airflow Optimal cooling meets stylish design The XT Pro Ultra offers space for up to ten fans and supports radiators up to 360 mm on the top. With four pre-installed 140 mm D-RGB fans, it ensures excellent airflow right out of the box. The mesh front panel and tempered glass side panel combine functionality with aesthetics. The Glacier One 360M25 Gen2 AiO cooler delivers excellent cooling performance thanks to its powerful pump and three optimized 120 mm PWM fans—ideal for high-end Intel and AMD CPUs. The integrated D-RGB lighting ensures a tidy yet spectacular look. Room for high-end components The XT Pro Ultra gives you space for graphics cards up to 415 mm in length and CPU coolers up to 184 mm high. The case is also prepared for vertical GPU mounting and offers enough room for 2x 3.5-inch and 5x 2.5-inch drives. ATX and even E-ATX motherboards fit in easily as well. Cable-friendly, modern setup Thanks to support for rear-connector motherboards like ASUS BTF and MSI Project Zero, your system can be kept especially tidy. The Glacier One 360M25 Gen2 supports you with a single control cable for RGB lighting—for a clean build with no cable clutter. Quiet & powerful: the M25-Gen2 fans The M25-Gen2 fans are designed for radiators, delivering high cooling performance at only 35.13 dB(A)—with an airflow of 123.55 m³/h and a static pressure of 2.51 mmH2O. Rubber pads prevent disruptive vibrations, and the PWM mode automatically adjusts the speed as needed. With the Phanteks XT Pro Ultra & Glacier One 360M25 Gen2 bundle, you get a perfectly coordinated combination of case and water cooling that brings performance, cooling, and design together at the highest level.
With an innovative airflow design, the Aerocool D520A PC case is the perfect choice for building a powerful gaming PC or a creative workstation with outstanding cooling performance. This case easily accommodates the latest gaming hardware, including motherboards with back-connect support, high-end graphics cards, multiple hard drives, and a powerful ATX power supply.Keeping your hardware at an optimal temperature is simple, as this case can house up to twelve 120mm fans and a 360mm radiator. Every PC built in this case also impresses with its striking appearance – thanks to tempered glass side panels and the elegant white finish.Aerocool D520A PC Case at a Glance:Mid-tower PC caseCompatible with motherboards featuring rear I/O (back-connect)Seven PCIe slots and 400mm GPU clearance for modern graphics cardsSupports up to twelve 120mm fans and a 360mm radiatorAirflow-optimised PSU shroud with 280mm clearance for ATX power suppliesAvailable in black or white, with tempered glass side panelSpacious Case for Modern HardwareThe Aerocool D520A PC case provides ample support for the latest gaming hardware. The main compartment offers generous space for powerful ATX motherboards, including advanced ASUS BTF and MSI Project Zero motherboards with rear I/O. Furthermore, seven PCIe slots and 400mm GPU clearance ensure plenty of room for high-end graphics cards such as the NVIDIA GeForce RTX 50 or AMD Radeon 9000 series.Additionally, the Aerocool D520A PC case features a large PSU chamber at the bottom. This chamber is designed with a slanted side wall to optimise airflow in the main compartment. At the same time, it offers up to 280mm clearance for an ATX power supply and its cables.Powerful Cooling OptionsThe Aerocool D520A PC case is the ideal choice for building a PC with optimised cooling. The chassis features mounting points for up to twelve fans – up to three 120mm fans each at the front, side, and top. The PSU shroud can accommodate two additional fans, while the rear can also house a single fan. Moreover, the internal layout is designed to direct airflow precisely to the key components – the slanted PSU chamber channels airflow directly to the GPU and across the motherboard tray.Furthermore, the Aerocool D520A PC case is compatible with a wide range of CPU cooling solutions. With a CPU clearance height of 180mm, you can easily install a powerful dual-tower air cooler. Alternatively, the top supports a radiator up to 360mm long, allowing integration of a high-performance AIO water cooling system.Easy Build, Easy MaintenanceThanks to its innovative design, the Aerocool D520A PC case makes building and maintaining a gaming PC or workstation considerably easier. The front, top, and side panels can be fully removed, providing easy access to all areas of the case. This significantly simplifies both hardware installation and later maintenance.Additionally, the D520A is equipped with three nylon dust filters on the front, top, and bottom, which can be removed for regular cleaning. Perfect for maintaining optimal airflow and keeping the interior of your case clean over the long term.
Das Chenbro RM24100-L ist ein robustes und ausbaubares Gehäuse für professionelle und platzsparende Server-Lösungen. Sein benutzerfreundliches Design bietet einfache Installationen. Mit seiner guten Belüftung bleibt es auf lange Zeit zuverlässig.
Chenbro bietet mit dem RM14300 ein nur 41cm tiefes und sehr hochwertiges 19" Gehäuse mit 1HE, welches für den Einsatz mit mini ITX und micro ATX Mainboards geeignet ist. Das Gehäuse lässt sich auch um 180 Grad gedreht einbauen, so dass die normalerweise rückwärtigen Ports des Mainboards frontseitig erreichbar sind. Neben dem Mainboard können intern im Gehäuse noch bis zu 2 x 3,5" HDDs und 2 x 2,5" HDDs/SSDs verbaut werden. Drei 40mm Turbofan Lüfter von NMB mit bis zu 12.000upm und 4-poligem PWM Anschluss sind bereits im Gehäuse vorinstalliert. Frontseitig sind zwei USB 3.0 Ports verfügbar. Intern lässt sich via optionaler Riserkarte noch eine PCIe Steckkarte mit voller Bauhöhe integrieren.
Do you want a compact, stylish PC case with modern features and a view of your system? The Thermalright TL-M10 Vision is a Micro-ATX gaming case with a large LCD display, ARGB lighting, and versatile cooling and expansion options – made for powerful builds in a compact format. Micro-ATX case with a large integrated LCD display for system information or graphics Addressable RGB lighting and a clear view through the tempered-glass side window Supports modern I/O ports such as USB-C, USB 3.0, and audio Flexible cooling options with support for numerous fans and radiators Room for powerful components such as large graphics cards and CPU coolers Thermalright TL-M10 Vision – Premium Micro-ATX case with display The Thermalright TL-M10 Vision was designed as a compact Micro-ATX case that combines functionality and showmanship. In addition to the large integrated LCD display, which you can use for system information or custom graphics, the tempered-glass side window provides a direct view of your hardware.Modern design and versatile cooling options With addressable RGB lighting and numerous mounting points for fans and radiators, the TL-M10 Vision offers both visual highlights and a solid foundation for efficient cooling strategies. Thanks to support for large CPU coolers and graphics cards, it is suitable for powerful gaming or workstation builds.Component compatibility and front ports In the I/O area, modern ports such as USB-C and multiple USB 3.0 ports as well as audio jacks are available. The interior of the case is designed to provide space for common hardware configurations in the Micro-ATX segment, including support for common cooler and radiator sizes
