Black midi-tower with wood decor, extravagant design with panoramic window, for motherboards up to ATX format, exceptionally good airflow, two different motherboard positions, 2x USB-A ports on the I/O panel, with wood front
Portable mini case, up to five fans, motherboards up to Micro-ATX, GPU up to 335 mm, and CPU cooler up to 170 mm height, 1x 3.5-inch or 2.5-inch drive, with carrying handle
Tootekood: U4 PRO MESH WHITEGTIN: 6970620553047Korpused
Edler Midi-Tower von Jonsbo in Weiß, dezentes Design aus Stahl, mit Seitenteil mit Mesh, Grafikkarten bis 330 mm, bis zu 5x 120-mm-Lüfter möglich, Mainboards bis ATX
White case with 270° tempered glass side panel Optimal cooling options with up to nine fans and radiators up to 420 mm Spacious interior for versatile high-end motherboards up to E-ATX Space for graphics cards up to 460 mm and CPUs with a height of up to 170 mm Installation of up to nine SSDs provides extensive storage options Supports motherboards with back-connect (ATX, mATX) Modular design simplifies assembly The TRYX LUCA L70: Midi-Tower for gaming PCs with maximum power The TRYX LUCA L70 is a large midi-tower that impresses not only with its variety of hardware possibilities but also with its timeless design that fits into any setup. The tempered glass on the front and side puts your high-end build in the spotlight—ready to earn true admiration. With the LUCA L70, you are perfectly equipped to build your gaming PC exactly the way you want. This midi-tower not only offers you more than enough space to cool your hardware, but it can also be easily disassembled and reassembled. Building your high-end system has never been so easy! Comprehensive cooling options for your new build When you assemble your own PC, cooling is one of the most important points to consider. The LUCA L70 allows you to install up to nine fans: two 120 mm or 140 mm fans on the top, three 120 mm or 140 mm fans on the side, three 120 mm or 140 mm fans on the bottom, and one 120 mm fan at the rear. Note that in this configuration, the power supply must be mounted on the top of the case. If you prefer to mount the PSU at the bottom, three fans can be installed on the top, and only one on the bottom. Water cooling enthusiasts won't be disappointed either: radiators up to 420 mm can be installed in several places. If the PSU is mounted on the top, you can fit a radiator up to 240 mm there and up to 360 mm at the bottom. If the PSU is mounted at the bottom, there is room for a 420 mm radiator on both the top and the side. To prevent dust from accumulating unnecessarily inside the case, there are dust filters on the top and the bottom. This ensures significantly longer hardware lifespan and saves you time and annoying cleaning. Thanks to the numerous options for installing fans and radiators, efficient cooling is guaranteed, ensuring your high-end hardware always operates at peak performance. Additionally, the tower stands 4 mm off the ground on X-shaped legs, further improving airflow. Case for powerful hardware To ensure even the most demanding games run smoothly on high settings, the LUCA L70 supports powerful graphics cards up to 460 mm in length. An included GPU bracket ensures the card doesn't suffer due to gravity. Vertical installation of the graphics card is also possible, but the necessary accessories must be purchased separately. The midi-tower is compatible with motherboards up to E-ATX and up to 280 mm wide. To avoid messy cabling, motherboards with rear connectors are also supported when the PSU is in the top position, but only in ATX or Micro-ATX format. The CPU height should not exceed 170 mm, while the power supply should be a maximum of 190 mm long. To ensure enough storage for your programs and games, up to nine 2.5-inch drives can be mounted on the side in the LUCA L70. Toolless assembly and disassembly To make installing and swapping your hardware as easy as possible, the LUCA L70 is designed to be completely modular. The front, side, and other parts can be removed and reassembled without additional tools. The motherboard tray can also be repositioned, allowing you to install the motherboard, CPU, and CPU cooler independently of each other.
The Lian Li Vector V100 combines stylish yet simple design with high compatibility and a special cutout for more individuality. With this desktop case, you get the perfect chassis for your next gaming PC. White midi-tower with tempered glass on the side and front Supports motherboards up to ATX form factor and with back-connect design Optimal cooling with up to nine fans and radiator support up to 360 mm Space for graphics cards up to 415 mm and CPU coolers up to 180 mm in height Four 120 mm fans with RGB lighting included Cutout with removable cover for collectibles The Lian Li Vector V100: midi-tower with a stylish design and plenty of space for hardware Express your personality with the Vector V100. Thanks to tempered glass panels on the side and front, you have an unobstructed view into your tower’s interior, while the LED strips are just the beginning of impressive RGB lighting. Make your build something special Directly behind the front of the V100 case is a cutout. Whether for figures or other collectibles—you can display your interests. If you don't need the cutout, simply cover it with the removable panel. Extensive cooling options Four 120 mm ARGB fans are already pre-installed—three reverse fans on the side and one with standard orientation at the rear. Thanks to their reversed fan blades, the sideways-mounted fans provide efficient airflow—and look just like regular fans. Additional mounting points for more fans are located on the top and bottom. If you prefer water cooling, you can also install a radiator up to 360 mm on the top panel. The dust filter at the bottom is easy to remove, so you can clean it whenever needed. Easy installation of your gaming hardware The Vector V100 offers plenty of space for your components—even high-end hardware. Thanks to support for motherboards with back-connect design and tidy cable management, your build will really stand out.
Lanberg's blank patch panel is designed to be fitted with keystone modules, both network-related like RJ45, RJ11, RJ12, as well as, for audo-video-data eg. HDMI, USB, F, BNC etc.
External SSD/HDD 2.5 inches case EC600 USB3.2A The EC600 2.5 SATA HDD/SSD enclosure is an environmental friendly drive enclosure that extends the service life of old drives when consumers upgrade their systems. Do your part for the planet by simultaneously reducing electronic waste and carbon emissions!
AiO water cooling with a 240 mm large and 30 mm thick radiator High-performance 8th generation Asetek pump with 2,600 RPM 2x 120 mm ROTA-ARGB fans with high airflow and static pressure Anamorphic 3D AMOLED display with 2K resolution and 60 Hz Simple setup: control fans, pump, and display via KANALI software Compatible with AMD Socket AM5 / AM4 and Intel LGA 1851 / 1700 TRYX PANORAMA ARGB 240: Complete water cooling with unique display The TRYX PANORAMA ARGB AiO water cooling combines advanced technology, customizable ARGB lighting, and a unique 3D AMOLED display, setting new standards for both performance and aesthetics in your gaming PC. With a 30 mm thick 240 mm radiator, powerful ARGB PWM fans, and a reliable 8th generation Asetek pump, this all-in-one solution delivers excellent cooling performance for your hardware. Its thoughtful and flexible design allows for quick and easy installation. Curved 3D AMOLED display ensures unmatched visuals The highlight of the TRYX PANORAMA AiO is its anamorphic 3D AMOLED display. This scratch-resistant screen offers you unprecedented features: Fascinating technology, breathtaking images The curved 3D AMOLED display is unlike anything you've seen before. It brings stunning 3D depth effects directly into your gaming PC—without the need for any special glasses. The content appears vivid and tangible, whether it's animated wallpapers, impressive graphics, or system information. With the KANALI software, you can bring your own 3D images and videos to life in full glory right on the display. The best part? The software is continuously updated with new, exciting content, offering you ever more ways to customize your setup. With this water cooler, every glance at your PC is a true experience. Efficient performance and reliable cooling The TRYX PANORAMA 240 features a robust aluminum radiator, ensuring effective heat dissipation. The circulating coolant is powered by a high-performance 8th generation Asetek pump which, despite its high output and integrated 30 mm VRM fan, remains especially quiet at just 25.3 dB(A). Thanks to high-volume tubing, coolant circulates efficiently, resulting in low and stable component temperatures. Powerful and quiet fans with stylish lighting The optimal airflow is provided by the two included 120 mm fans, equipped with customizable ARGB lighting. With a maximum airflow of 112.3 m³/h and a static pressure of 1.88 mmH2O, these fans ensure efficient cooling even during intensive use. The noise level remains extremely low at only 27.86 dB(A), so you'll hardly notice your powerful cooling. Intuitive software integration With the KANALI software, the TRYX PANORAMA AiO offers an intuitive control platform. Through the software, you can configure not only the display modes and content of the AMOLED display but also customize the ARGB lighting as well as the fan and pump speeds to your preferences. The software is easy to use and lets you precisely control and monitor your system. Whether you prefer whisper-quiet operation for office work or maximum cooling performance for demanding gaming sessions—KANALI software gives you full control.
Compact dimensions, including a carrying handle – Perfect for taking with you High-quality steel, front and top panels with fine perforations for airflow Excellent workmanship Space for 240mm radiators Supports full-size gaming graphics cards Supports Mini-ITX and Micro-ATX motherboards Space for powerful SFX power supplies Excellent space utilization and a thoroughly well-thought-out concept Building a compact desktop mini-host is not only fun, but also presents some challenges. As the case size decreases, conflicts such as compatibility, heat dissipation, and the assembly experience increase. Compact design with high compatibility The material of the case is up to 2 mm thick and features a large number of mesh openings to improve heat dissipation while also providing eye-catching aesthetics. The removable handle, 2 mm thick, allows for easy mobility and can be effortlessly mounted and dismounted without affecting the internal hardware installation. It is attached to the case with a screwless hook connection, so when removed, there are no screw holes to impact the appearance. Space-saving yet powerful With a volume of only about 20 liters, it fits easily into various desktop environments. The main dimensions are 370 mm * 186 mm * 295 mm (depth/width/height, excluding handles/feet and other protrusions) and allow for compatibility with full-size Micro-ATX motherboards and long graphics cards, which almost match the dimensions of an ITX case. Maximum performance in small space It supports 240 mm radiators with a thickness of 30 mm. Thanks to the pull-out bracket, installation is easier and the difficulty of installing hardware in tight spaces is effectively reduced. The Z20 case is compatible with CPU coolers up to a height of 164 mm. Combined with top-mounted fans and a rear-mounted fan, CPU heat can be quickly dissipated. Important: When installing an Intel CPU, the cooler height limit is 164 mm; when installing AMD CPUs, the cooler height limit is 163 mm.
With the D32 series, Jonsbo targets everyone who wants to build their system in a space-saving way. Compared to the D32 PRO, the D32 STD PC case offers the most important features such as back-connect or minimal front I/O, catering to the midrange and budget segment. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for back-connect motherboards Tempered glass side panel ensures a subtle appearance Plenty of space for cooling solutions allows the installation of powerful hardware Dust filter protects your hardware from annoying dust particles The Jonsbo D32 STD Black: Space-saving and subtle case for all kinds of hardware Whether it's a midrange HTPC or a high-end PC, the D32 STD Black from Jonsbo comfortably accommodates various types of builds. The compact case supports graphics cards up to 365 mm in length and CPU coolers up to 164 mm in height. This means that even with the compact design of the case, adequate cooling for your hardware is ensured. Working with up to six 120 mm fans or one 120 mm fan and four 140 mm fans, the fans provide tremendous airflow inside the case. No cable clutter with back-connect With back-connect motherboards such as ASUS's BTF series, MSI's PROJECT ZERO series, or GIGABYTE's Stealth series, the case remains almost completely free of visible cable clutter while using the same amount of space. Since most power and connection cables can be connected at the back of the motherboard, you save on cable management and still get a clean look in your case. Together with the tempered glass side window, your hardware is presented in an especially appealing way. Powerful cooling in a small space To ensure your powerful hardware is sufficiently cooled even in this compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for ample airflow, a large dual-tower CPU cooler, or even a 240 mm AIO, your hardware stays cool even under heavy loads. The dust filter on the bottom and the mesh side panel design ensure your hardware remains free of dust and dirt. This keeps your temperatures at optimal levels and helps extend the lifespan of your hardware.
With the D32 series, Jonsbo targets everyone who wants to build their PC in a space-saving way. Compared to the D32 PRO, the D32 STD PC case addresses the midrange and budget segment with key features such as back-connect support and minimal front I/O.Elegant and space-saving design for mATX motherboardsSeamless cable management with cutouts for back-connect motherboardsTempered glass side panel provides a subtle appearanceAmple space for cooling solutions allows the installation of high-performance hardwareDust filter protects your hardware from annoying dust particlesThe Jonsbo D32 STD White: Space-saving and subtle case for a wide range of hardwareWhether a midrange HTPC or a high-end PC, builds of all kinds comfortably fit into the D32 STD White from Jonsbo. This minimalistic case accommodates graphics cards up to 365 mm long and CPU coolers up to 164 mm high.Thus, even with the compact design of the case, adequate cooling of your hardware is ensured. In combination with up to six 120 mm fans, or one 120 mm fan and four 140 mm fans, the fans also provide enormous airflow inside the case.No cable clutter with back-connectWith back-connect motherboards such as ASUS's BTF series, MSI's PROJECT ZERO series, or GIGABYTE's Stealth series, the case is virtually free of visible cable clutter despite having the same footprint.Because most power and connection cables can be connected at the rear of the motherboard, you save time on cable management while still enjoying a clean look inside your case. Combined with the tempered glass side window, the view of your hardware is especially appealing.Powerful cooling in a small spaceTo ensure your high-performance hardware is sufficiently cooled even in the compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for sufficient airflow, a large dual-tower CPU cooler, or even an installable 240 mm AIO, your hardware will always remain cool, even under load.The dust filter on the bottom and mesh side panel design ensure your hardware stays free of dust and dirt. This keeps your temperatures optimal at all times and helps increase the lifespan of your hardware.
Darkflash DB330M Mesh computer case (white)Darkflash DB330M Mesh is a computer case designed for M-ATX and ITX standard motherboards. Its dimensions (368 × 218 × 400 mm) allow the construction of a compact set-up with a graphics card up to 305 mm long and CPU cooling up to 180 mm high. The design is based on a 0.5 mm SPCC steel frame and features a tempered glass panel and mesh front for efficient air or liquid cooling.Efficient air coolingThe Darkflash DB330M Mesh case supports up to 7 fans: 2 at the front, 2 at the bottom, 2 at the top and one at the rear. The top part of the design allows for the installation of fans in 120 or 140 mm sizes, while the remaining locations are provided for 120 mm fans only. This arrangement allows for the creation of a vertical cooling channel that promotes natural air circulation and efficiently dissipates heat from components.240 mm liquid coolingThe Darkflash DB330M Mesh allows you to mount a water cooler of up to 240 mm in the top. This allows you to install a high-performance AIO system without sacrificing other components. The maximum height of the air cooler is 180 mm.Mesh panel with filterThe front panel of the case is made of mesh, which improves airflow and also acts as a dust filter. Additional vents are also located on the top and bottom of the design.Space for longer GPUsA graphics card up to 305 mm in length can be mounted inside. The chassis offers 4 PCI slots, making it possible to mount two- and three-slot cards. The power supply compartment and cable space do not limit the length of the GPU.Glass side panelThe left panel is made of tempered glass to expose the computer's interior and components with RGB backlighting. The panel can be easily removed without tools.Separate space for cables and multiple portsThe back of the case features a contoured space and pass-through holes for orderly cable routing. This layout makes it easier to install components and improves airflow in the main compartment. The front panel features a USB 3.0 port, 2 USB 2.0 ports, one HD Audio port and a power button. This allows you to enjoy quick access to basic functions without having to reach the back of the case.ATX power supply compatibility and board supportThe bottom of the case has room for a standard ATX power supply. This makes it possible to mount full-power units without the space constraints typical of smaller enclosures. In addition, the Darkflash DB330M Mesh supports M-ATX and ITX motherboards, offering optimal conditions for building a home, office or gaming PC. The lack of pre-installed fans allows for individual selection of cooling components. ManufacturerDarkflashModelDB330M Mesh WhiteHousing typeMidi TowerSide panelTempered glassMotherboard standardM-ATX, ITXPower supply standardAt the bottomSlots for internal drives3.5" HDD x2, 2.5" SSD x1Expansion card slots4Max PSU length210 mmMax length of graphics card305 mmMax height of CPU cooler180 mmMax number of fans7Fan mounting optionsTop: 120 mm x2 / 140 mm x2; Bottom: 120 mm x2; Front: 120 mm x2; Rear: 120 mm x1Water cooling mounting optionsTop: 240 mmNumber of fans installedNo fans installedType of fansNo fans installedButtons and controlsPowerConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorWhiteHeight400 mmWidth218 mmDepth368 mmWeight3.8 kg
Darkflash DB330M Mesh computer case (black)Darkflash DB330M Mesh is a computer case designed for M-ATX and ITX standard motherboards. Its dimensions (368 × 218 × 400 mm) allow the construction of a compact set-up with a graphics card up to 305 mm long and CPU cooling up to 180 mm high. The design is based on a 0.5 mm SPCC steel frame and features a tempered glass panel and mesh front for efficient air or liquid cooling.Efficient air coolingThe Darkflash DB330M Mesh case supports up to 7 fans: 2 at the front, 2 at the bottom, 2 at the top and one at the rear. The top part of the design allows for the installation of fans in 120 or 140 mm sizes, while the remaining locations are provided for 120 mm fans only. This arrangement allows for the creation of a vertical cooling channel that promotes natural air circulation and efficiently dissipates heat from components.240 mm liquid coolingThe Darkflash DB330M Mesh allows you to mount a water cooler of up to 240 mm in the top. This allows you to install a high-performance AIO system without sacrificing other components. The maximum height of the air cooler is 180 mm.Mesh panel with filterThe front panel of the case is made of mesh, which improves airflow and also acts as a dust filter. Additional vents are also located on the top and bottom of the design.Space for longer GPUsA graphics card up to 305 mm in length can be mounted inside. The chassis offers 4 PCI slots, making it possible to mount two- and three-slot cards. The power supply compartment and cable space do not limit the length of the GPU.Glass side panelThe left panel is made of tempered glass to expose the computer's interior and components with RGB backlighting. The panel can be easily removed without tools.Separate space for cables and multiple portsThe back of the case features a contoured space and pass-through holes for orderly cable routing. This layout makes it easier to install components and improves airflow in the main compartment. The front panel features a USB 3.0 port, 2 USB 2.0 ports, one HD Audio port and a power button. This allows you to enjoy quick access to basic functions without having to reach the back of the case.ATX power supply compatibility and board supportThe bottom of the case has room for a standard ATX power supply. This makes it possible to mount full-power units without the space constraints typical of smaller enclosures. In addition, the Darkflash DB330M Mesh supports M-ATX and ITX motherboards, offering optimal conditions for building a home, office or gaming PC. The lack of pre-installed fans allows for individual selection of cooling components. ManufacturerDarkflashModelDB330M Mesh BlackHousing typeMidi TowerSide panelTempered glassMotherboard standardM-ATX, ITXPower supply standardAt the bottomSlots for internal drives3.5" HDD x2, 2.5" SSD x1Expansion card slots4Max PSU length210 mmMax length of graphics card305 mmMax height of CPU cooler180 mmMax number of fans7Fan mounting optionsTop: 120 mm x2 / 140 mm x2; Bottom: 120 mm x2; Front: 120 mm x2; Rear: 120 mm x1Water cooling mounting optionsTop: 240 mmNumber of fans installedNo fans installedType of fansNo fans installedButtons and controlsPowerConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorBlackHeight400 mmWidth218 mmDepth368 mmWeight3.8 kg
Darkflash DS900WS computer case (black) + 4 fansDarkflash DS900WS is a modern solution for demanding users who value both aesthetics and functionality. The distinctive design with a panoramic design without an A-pillar, equipped with a single transparent glass wall and a wood and metal front, not only looks impressive, but also provides excellent visibility of components. The case is designed to provide optimal cooling, performance and versatility, while offering ease of modification and expansion of computer systems. The kit includes 4 fans.Durability and aestheticsThe Darkflash DS900WS stands out for more than just its looks. It is an enclosure built with durability in mind. The support mechanism and solid construction ensure stability and security for all computer components, which is especially important when expanding the system.Effective coolingEvery computer needs a good cooling system, and the DS900WS provides it without question. The ability to mount up to 10 120 mm fans and a large 360 mm heatsink makes the case ideal for those who expect high performance and reliability, especially during intensive use. In addition, 4 high-performance fans are included, which blend perfectly with the interior of the case.Protection and ease of useThe case is designed to protect the computer's interior from dust, which is important for maintaining cleanliness and performance. In addition, its clever design makes it easy to upgrade and expand components, which is especially useful for users who want to build exactly the system they want.Compatibility and expansionThe Darkflash DS900WS is compatible with a wide range of motherboards, including ATX, M-ATX and ITX, giving users freedom of choice and flexibility in configuring their systems. Additionally, seven PCI slots allow for further expansion and customization of the chassis. ManufacturerDarkflashModelDS900Enclosure typeMidi TowerSide panelTempered glassMotherboard standardATX, M-ATX, ITXPower supply standardATX at the bottomSlots for internal drives3.5" HDD x2, 2.5" SSD x2Expansion card slots7Max PSU length250 mmMax length of graphics card425 mmMax height of CPU cooler170 mmMax number of fans10 (120 mm) or 2 (140 mm)Fan mounting optionsTop: 120 mm fan x3 or 140 mm fan x2; Rear: 120 mm fan x1; Side: 120 mm fan x3; Bottom: 120 mm x3Water cooling mounting optionsTop: 240 / 360 mm; Side: 240 mmNumber of fans installed4Type of installed fansARGBButtons and controlsPower, Reset, LEDConnectorsUSB 3.0 x1, USB2.0 x2, HD AudioMaterialTempered glass, 0.5 mm SPCC, wood, metalColorblackHeight454 mmWidth218 mmDepth434 mmWeight6.53 kg
The Jonsbo D400 is a high-quality PC case specially designed for PC enthusiasts who value elegant design and excellent cooling options. With its 270° panoramic window and support for up to two 360-mm radiators, it offers both an impressive showcase for your components and efficient cooling. The 270° panoramic window allows a comprehensive view of your hardware. Support for two 360-mm radiators ensures optimal cooling performance. Compatibility with ATX, M-ATX, and Mini-ITX motherboards provides flexibility. USB 3.1 Type-C front port enables fast data transfers. Maximum GPU length of 450 mm for installing powerful GPUs. Elegant design with extensive visibility. With the Jonsbo D400, your build takes center stage. Thanks to the 270° panoramic tempered glass window, this PC case offers a premium display area for your hardware—ideal for spectacular RGB setups and high-end cooling concepts. The midi tower strikes the perfect balance between size and functionality. With ample space for powerful hardware and efficient cooling, it is the ideal choice for gaming and workstation builds. Thanks to back-connect support, your build in the D400 will look futuristic—no visible cables, just maximum tidiness, perfect airflow, and uncompromising design. Outstanding cooling options With support for two 360-mm radiators and multiple fan mounting points, the D400 offers flexible options for air and water cooling. This ensures efficient heat dissipation and keeps your system cool even under heavy loads. Thanks to the removable dust filter at the bottom, your case stays free of dust build-up. The filter is easy to clean, so your computer always stays optimally clean. Thanks to the mesh bottom, rear, and top, you also benefit from excellent airflow, ensuring your system is reliably and efficiently cooled even under heavy use. User-friendly features The case is equipped with a USB 3.1 Type-C and two USB 3.0 Type-A ports at the front, allowing fast data transfers and easy connection of external devices. The spacious interior also ensures easy installation and efficient cable management.
The Jonsbo D400 is a high-quality PC case specifically designed for PC enthusiasts who value elegant design and excellent cooling capabilities. With its 270° panoramic window and support for up to two 360mm radiators, it offers both an impressive display of your components and efficient cooling. The 270° panoramic window provides a comprehensive view of your hardware. Support for two 360mm radiators ensures optimal cooling performance. Compatibility with ATX, M-ATX, and Mini-ITX motherboards provides flexibility. The USB 3.1 Type-C front connector enables fast data transfers. Maximum GPU length of 450mm allows installation of powerful GPUs. Elegant design with extensive visibility. With the Jonsbo D400, your build takes center stage. Thanks to the 270° tempered glass panoramic window, this PC case offers a premium showcase for your hardware—perfect for spectacular RGB setups and high-end cooling concepts. The midi tower offers the perfect balance between size and functionality. With ample space for powerful hardware and efficient cooling, it is the ideal choice for gaming and workstation builds. Thanks to back-connect support, your build in the D400 will look futuristic—no visible cables, just maximum tidiness, perfect airflow, and uncompromising design. Excellent cooling capabilities With support for two 360mm radiators and multiple fan mounting points, the D400 offers flexible options for air and water cooling. This ensures efficient heat dissipation and keeps your system cool even under heavy loads. Thanks to the removable dust filter on the bottom, your case stays free of dust deposits. The filter is easy to clean, so your computer always remains optimally clean. With mesh on the bottom, rear, and top, you also benefit from excellent airflow, ensuring your system is reliably and efficiently cooled even under high load. User-friendly features The case is equipped with a USB 3.1 Type-C and two USB 3.0 Type-A ports on the front, enabling fast data transfers and easy connection of external devices. The spacious interior also ensures easy installation and efficient cable management.
Micro-ATX case, innovative front-mounted power supply, supports GPUs up to 430mm, space for up to seven 120mm fans, separate radiator chamber, glass panels on the front and side, includes three 120mm reverse fansThe Phanteks XT V3 combines compact design with ample room for modern hardware. With stylish glass panels and powerful cooling, your gaming setup becomes a true showcase. Compact Micro-ATX case: ideal for modern builds Ample space: supports GPUs up to 430mm in length Optimized for cooling: up to seven 120mm fans or a 360mm radiator Compatible: with back-connect motherboards Showcase design: tempered glass panels on the front and side The Phanteks XT V3: Compact Mini Case with Plenty of Space Phanteks XT V3 Case Thanks to its compact form factor, the Phanteks XT V3 can be easily integrated into a wide range of gaming or professional setups—while still providing excellent support for modern hardware. The spacious interior offers room for Mini-ITX and Micro-ATX motherboards and supports back-connect motherboards. Additionally, high-performance graphics cards fit with ease, as the Phanteks XT V3 features four PCIe slots and accommodates GPUs up to 430mm. The rear chamber of the case also impresses with an innovative design for premium hardware. Instead of the usual position, the power supply has been relocated to the top front. This allows the Phanteks XT V3 to support full-sized ATX power supplies, providing even greater compatibility. Powerful Cooling Phanteks XT V3 The Phanteks XT V3 delivers outstanding cooling performance. There are seven mounting points for 120mm fans – three at the top, three at the bottom, and one at the rear – allowing for efficient airflow configurations. Out of the box, three powerful M25-120 reverse DRGB fans are pre-installed at the bottom, ensuring strong cooling. Additionally, the Phanteks XT V3 features a dedicated top chamber for a 360mm radiator. This makes it easy to install a powerful AIO cooler, keeping even high-end CPUs reliably cool during intense gaming sessions. Showcase Case Phanteks XT V3 With the Phanteks XT V3, you can display both your hardware and your building skills. The rear chamber provides plenty of space for cable management along with smart routing options for a clutter-free system. Completing the look are tempered glass panels on the front and side, giving you an unobstructed view of your components from every angle. Comprehensive I/O Panel Phanteks XT V3 The Phanteks XT V3 provides outstanding support for your gaming setup, thanks to the front I/O panel located at the bottom right. Here, you’ll find both a USB Type-A and Type-C port with USB 3.2 Gen 2x2 standard. Additionally, a 3.5mm combo audio jack is available for connecting your gaming headset.
The JONSBO T7 Black is a stylish case for compact gaming and office systems. It is aimed at users seeking a portable setup with high-quality materials and efficient use of space. Striking design with real wood handle and aluminium structure Compact build with full Micro-ATX compatibility Supports GPUs up to 280mm and CPU coolers up to 165mm Thoughtful dual-chamber layout for clean airflow Modern front ports including USB-C for maximum connectivity Design & Materials The case combines 3 mm thick aluminium with fine wood accents, offering a successful blend of technology and design. The integrated handle makes transport easier and emphasises the case’s mobile focus. Space & Hardware Support The T7 supports graphics cards up to 280mm in length and CPU coolers up to 165mm in height. Power supplies up to 220mm deep also fit inside. Two 2.5-inch SSDs and an additional 3.5- or 2.5-inch drive can be integrated. Efficient Cooling & Connectivity Up to three 120mm fans provide effective cooling, while the dual-chamber layout separates heat sources. The I/O panel offers USB 3.0 and audio as well as a modern USB-C port for fast data connections.
