Edler Big-Tower von PHANTEKS in Weiß, für Mainboards bis E-ATX-Formfaktor, Front und Seitenteil aus Tempered Glass, Rückseite mit Mesh an Scharnieren, 3x 360er und 1x 240er Radiator möglich
Arx 500 Air We've always had a sneak peek at the housings and we've seen a lot - and the sight of Arx 500 Air still makes us look like a big banana. No wonder, because we packed all our knowledge into it. Spoiler alert - it turned out like a dream. This is one of the largest (slightly shorter than the Arx 700 series) cases we have created. It is 486×228×429 mm - this is easily enough for, among others, a high cooling system (up to 179 mm), 7 fans (including 5 Stratus 140 PWM fans, which we provide at the start) and most graphics cards available on the market (up to 350 mm). . Everything sits in a pleasant draft, because the finely perforated front and top panels let in fresh air and block dust. You can check it through a tempered glass window.
Midi-Tower PC case, tempered glass side panel, mesh front, 5x Kolink Umbra ARGB PWM fans, supports GPUs up to 330 mm, power supply shroud, compatible with ATX motherboards
GIGABYTE C301 GLASS WHITE V2 - Optimized Airflow Design - RGB Fusion with ARGB Connector Hub - Support Motherboards up to E-ATX - Up to 360mm Liquid Cooling Compatible - Support Vertical GPU Installation - Full-Size Tempered Glass Side Panel - With USB 3.0 x2 and USB 3.1 Type-C x1 on I/O panel - Pre-installed 4 ARGB fans
Horizon ARGB FLOW Midi Black Three 140 mm ARGB fans are installed in the case at the front, pushing air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. 3 140 mm ARGB fans pre-installed on the front of the case. 1 120 mm ARGB fan pre-installed on the rear of the case. Glass side panel in the form of hinged doors. Airy front and top panels. 2 x USB 3.0 and 1 x USB-C. Screw-out PCI-E slot brackets. Possibility of mounting E-ATX motherboards. Ready for water cooling. Power supply tunnel. Available in fashionable white or elegant black. Four dust filters at the bottom, top, front and side of the case. Easily removable mesh on the front. Space for 4 hard drives (in a configuration of 2 SSD / 2 HDD or 3 SSD / 1 HDD or 4 SSD). ARGB fan controller. Your dream case is here, not over the horizon. MODECOM Horizon is one of those cases that fully meets the need for a decent, solidly made and functional computer case. This classic-looking case has a lot to offer. There are three 140 mm ARGB fans installed as standard at the front and one 120 mm ARGB at the back of the case. In addition, inside you will find plenty of space even for E-ATX boards, high CPU cooling and long graphics cards. And all this is closed behind a glass panel in the form of a door, surrounded by airy mesh panels with dust filters. The whole thing is enclosed in one, perfectly designed MODECOM Horizon case. Don't close yourself off to new things The side panel made of tempered glass in the form of an opening door is the very convenience of assembling and cleaning the computer. You can easily and conveniently open the door and assemble the set, replace RAM, graphics card and other components. There is no simpler and more convenient solution for assembling and modifying the interior of the computer and cleaning it, like the one used in the MODECOM Horizon case. Tempered glass, in turn, allows you to expose the installed graphics card and other expensive components. Nothing can stop this wind The case has three 140 mm ARGB fans installed on the front, which force air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. You get a case ready to use right out of the box, all you need to do is mount the components in it and work on a well-cooled and ventilated computer. Create a storm But that's not all, you can install additional 3 120 mm fans or 2 x 140 mm on the top of the case yourself. There is also the possibility of mounting two 120 mm fans on the motherboard wall. A computer configured in this way will be optimally cooled, ensuring that components operate at low temperatures, while contributing to their longer lifespan. Ready for anything The case is adapted to mount E-ATX boards. The wide possibilities of arranging and expanding the computer will work well in both gaming computers and professional solutions. The unlimited freedom of computer configuration allows for the installation of modern components with the possibility of further expansion. Games and programs will find their place here The MODECOM Horizon case has space for 4 hard drives. Two 2.5 SSD drives will find their place on the motherboard tray. Placed in a convenient place for connection, they will work great as media for games and programs. The disk basket in the power supply tunnel allows for the installation of two 3.5 HDD drives or a configuration of 1 x 2.5 SSD and 1 x 3.5 HDD. You can also simply put on 2.5 SSD drives and mount two such drives in the power supply tunnel. If you add space for M.2 drives on the motherboard, the MODECOM Horizon computer will become a real storage for games and documents.
Showcase case in white, vertical GPU kit with PCIe 5.0, with curved tempered glass, up to 11x 140 mm fans, space for two 420 mm radiators simultaneously, motherboards up to E-ATX, and GPUs up to 470 mm, two PWM fan hubs included
Showcase case in white, with curved tempered glass, up to 11x 140mm fans, space for three 420mm radiators simultaneously, motherboards up to E-ATX and GPUs up to 480mm, includes two PWM fan hubs
White midi-tower with wood decor, extravagant design with panoramic window, for motherboards up to ATX format, exceptionally good airflow, two different motherboard positions, 2x USB-A ports on the I/O panel, with wood front.
Darkflash DY470 computer case (black) + 4 fans + GPU bracketThe Darkflash DY470 case will allow you to build a computer that will surprise you with its performance and stylish, modern design. Its transparent panels allow you to expose the components of your choice, and support for ATX, Micro ATX and ITX motherboards, various types of graphics cards and other components means that everyone can create a configuration perfectly suited to their needs. The set includes four reliable fans, taking care of optimal performance, and a GPU bracket to protect the graphics card.Four fans for better performanceAdequate cooling of your computer is essential, which is why the Darkflash DY470 kit comes with 4 reliable DM12 Pro fans (3 on the side, 1 on the back). The fans reach speeds of up to 1600 RPM, and offer up to 20 different ARGB lighting effects. Their operation is extremely quiet (27.5 dB), so you won't disturb your household members, even during the most intense computer games. The fans feature 4Pin PWM and 5V3Pin A-RGB connectors, and are also compatible with ASUS AURA SYNC (5V), which means they automatically adjust their operation according to the temperature of your computer.Various expansion optionsThe DY470 offers an extremely spacious interior, allowing for easy expansion and installation of the components of your choice. It allows you to install a graphics card of up to 410 mm (horizontally) or up to 390 mm (vertically, with an optional PCIE4.0 cable), as well as a CPU cooler of up to 175 mm in height and a power supply of up to 200 mm. You can also accommodate two HDDs or one SSD, so you can easily provide space for your photos, videos, games or documents.Reliable coolingThe case provides extensive cooling capabilities, making it perfect for even the most demanding configurations. It allows the installation of up to 10 120 mm fans, so you can easily ensure effective air circulation and adequate temperature inside. However, that's not all. DY470 allows the installation of two 360 mm water coolers, which guarantees efficient, stable operation of the computer even under heavy load.Support for ATX motherboards with back-connect systemThe Darkflash DY470 case is compatible with ATX motherboards with a back-connect system that allows most cables to be hidden. This space organization ensures a neat interior look, and also makes cable management easier. Forget about unsightly cables visible by the front panel!Full protection of componentsThe case is equipped with full dust protection. This makes it easy to keep it in perfect condition - don't worry about it getting dirty quickly! What's more, the removable system prevents dirt accumulation and is very easy to clean. The GPU holder is also included, which takes care of the maximum safety of your graphics card. Together with it, you will avoid the risk of bending the card, as well as improve the stability of its installation, protect it from mechanical damage and increase the aesthetics of the case interior. All this use affects the stability of operation and longevity of components.Ports you needOn the front of the case you will find numerous connectors that will facilitate your daily work with the computer. You'll have a microphone input, a headphone jack, two USB 3.0 ports and one USB-C 3.2 port for fast charging and file transfer. So you can conveniently use your peripherals of choice!IncludedDarkflash DY470 enclosureDM12 Pro ARGB x4 fanGPU holderuser manual ManufacturerDarkflashModelDY470Housing typeBig TowerSide panelTempered glassMotherboard standardATX / Micro ATX / ITXPower supply standardIn the bottom, 200 mmSlots for internal drives3.5" HDD x2 / 2.5" SSD x1Expansion card slots7 (optional PCIE4.0 vertical cable)Max power supply length200 mmMax length of graphics cardHorizontal mounting: 410 mm; Vertical mounting: 390 mm;Max CPU cooler height175 mmMax number of fans10Fan mounting optionsRear: 1x 120 mm; Top: 3x 120 mm; Side: 3x 120 mm; Bottom: 3x 120 mm;Water cooling mounting optionsRear: 120 mm; Top: 360 mm; Side: 360 mm;Number of fans installed4Type of fansDM12 Pro ARGBButtons and controlsPower, RestConnectorsUSB 3.0 x 2, USB-C x 1, HD AudioMaterial0.7 mm SPCCColorBlackHeight497 mmWidth298 mmDepth473 mm
Darkflash DB330M Mesh computer case (white)Darkflash DB330M Mesh is a computer case designed for M-ATX and ITX standard motherboards. Its dimensions (368 × 218 × 400 mm) allow the construction of a compact set-up with a graphics card up to 305 mm long and CPU cooling up to 180 mm high. The design is based on a 0.5 mm SPCC steel frame and features a tempered glass panel and mesh front for efficient air or liquid cooling.Efficient air coolingThe Darkflash DB330M Mesh case supports up to 7 fans: 2 at the front, 2 at the bottom, 2 at the top and one at the rear. The top part of the design allows for the installation of fans in 120 or 140 mm sizes, while the remaining locations are provided for 120 mm fans only. This arrangement allows for the creation of a vertical cooling channel that promotes natural air circulation and efficiently dissipates heat from components.240 mm liquid coolingThe Darkflash DB330M Mesh allows you to mount a water cooler of up to 240 mm in the top. This allows you to install a high-performance AIO system without sacrificing other components. The maximum height of the air cooler is 180 mm.Mesh panel with filterThe front panel of the case is made of mesh, which improves airflow and also acts as a dust filter. Additional vents are also located on the top and bottom of the design.Space for longer GPUsA graphics card up to 305 mm in length can be mounted inside. The chassis offers 4 PCI slots, making it possible to mount two- and three-slot cards. The power supply compartment and cable space do not limit the length of the GPU.Glass side panelThe left panel is made of tempered glass to expose the computer's interior and components with RGB backlighting. The panel can be easily removed without tools.Separate space for cables and multiple portsThe back of the case features a contoured space and pass-through holes for orderly cable routing. This layout makes it easier to install components and improves airflow in the main compartment. The front panel features a USB 3.0 port, 2 USB 2.0 ports, one HD Audio port and a power button. This allows you to enjoy quick access to basic functions without having to reach the back of the case.ATX power supply compatibility and board supportThe bottom of the case has room for a standard ATX power supply. This makes it possible to mount full-power units without the space constraints typical of smaller enclosures. In addition, the Darkflash DB330M Mesh supports M-ATX and ITX motherboards, offering optimal conditions for building a home, office or gaming PC. The lack of pre-installed fans allows for individual selection of cooling components. ManufacturerDarkflashModelDB330M Mesh WhiteHousing typeMidi TowerSide panelTempered glassMotherboard standardM-ATX, ITXPower supply standardAt the bottomSlots for internal drives3.5" HDD x2, 2.5" SSD x1Expansion card slots4Max PSU length210 mmMax length of graphics card305 mmMax height of CPU cooler180 mmMax number of fans7Fan mounting optionsTop: 120 mm x2 / 140 mm x2; Bottom: 120 mm x2; Front: 120 mm x2; Rear: 120 mm x1Water cooling mounting optionsTop: 240 mmNumber of fans installedNo fans installedType of fansNo fans installedButtons and controlsPowerConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorWhiteHeight400 mmWidth218 mmDepth368 mmWeight3.8 kg
