Das Elite 690 verfügt über zwei gehärtete Glasscheiben, die Ihr System in Szene setzen, während eine holzstrukturierte Front und ein Mesh-Einlass Wärme mit effizientem Luftstrom verbinden. Dank der oberen und unteren Belüftung für vertikale Kühlung unterstützt es vielseitige Lüfter- und Kühlerkonfigurationen – perfekt für leistungsorientierte oder stilvolle Systeme. Die vertikale Anordnung trennt die Wärmezonen für eine bessere Luftzirkulation und eine sauberere Kabelführung. Bis zu 10 Lüfter in einer von unten nach oben verlaufenden Anordnung maximieren den Luftstrom und die Kühlung. Die aus echtem Holz gefertigte Frontplatte verleiht jedem Raum eine warme, organische Note. Das Gehäuse enthält 3 in Reihe schaltbare ARGB-Lüfter mit vollständiger Unterstützung für die Beleuchtungssynchronisierung des Motherboards. Das Elite 690 verfügt über einen USB 3.2 Gen 2x2 Typ-C und zwei USB 3.0-Anschlüsse für blitzschnelle Konnektivität.
Cabinet Form Factor: Midi Torn Mainboard Form Factor1Supported Mainboard Form Factor: ATXMicro ATX 3.5-inch Internal Drivesahtleid1(3.5-mm minijack) Headphones: 1(3.5-mm minijack) External värv: must Package Type1kg Pack kaal Netto (kg): 2.8 kg Pieces in pack1Box kaal Brutto (kg): 3.61kg Retail Packaging Netokaal Carton: 0.5 kg Retail Packaging Netokaal plastik1kg Packs in Box: 1EAN Code: 426045564361
Tootja: AKYGA Tootegrupp: arvutikorpus arvutikorpuse tüüp: kerge Form Factor Ümbrise tüüp (motherboard type): MicroATX, Flex ATX, MINI ITX Supported toiteploki standards: TFX external 3,5"sahtleid: 1 external 5,25"sahtleid: 1 external 5,25" väikseid sahtleid: 0 internal 2,5"sahtleid: 1 internal 3,5"sahtleid: 1 intenal 5,25"sahtleid: 0 paigaldatud toiteplokk(ies): Ei maksimum toiteplokke: 1 toiteploki võimsus: andmed puuduvad elektripesade pistikuid Serial ATA: andmed puuduvad ATX toiteploki ühenduspesa tüüp: ei puuduta +12V elektripesa tüüp: ei puuduta I/O Ühendusi: 1x stereo mini-jack (kõrvaklappide väljund), 1x stereo mini-jack (mikrofon input), 2x USB 2.0, 2x USB 3.0 ventilaatori kiiruse regulaator: Ei paigaldatud ventilaatoreid: 1 maksimaalne kogus of fans: 1 laius: 102 mm pikkus: 356 mm kõrgus: 338 mm pesade arv korpuses: andmed puuduvad külje õhukanal: Ei tööriistavaba kokkupanek: Jah värv: must Lisaomadused: -can be paigaldatud vertikaalselt või horisontaalselt Lisainfo: Product Site
Tootekood: OBSERVATORY LITE MESHGTIN: 5999094003491Korpused
Mõõtmed: 190 x 440 x 400 mm (L x K x S) Kasti mõõtmed: 258 x 498 x 440 mm (L x K x S) Materjal: Teras, karastatud klaas, võrk, plastik Pakend: EPE vaht Kaal: u. 5,5 kg Värv: must Kujutegur: ATX, Micro-ATX, Mini-ITX Võimalikke fänne kokku: 3x 120 mm (ees) 2x 120 mm (katus) 1x 120 mm (taga) Eelinstallitud: 3x 120 mm (ees) ARGB LED 1x 120 mm (taga) ARGB LED Radiaatori kinnitus: 1x 280 mm (ees) Filter: katus, põhi Sõidupesad: 2x 3,5 / 2,5 "(sisemine) 3x 2,5 "(sisemine) PSU: 1x tavaline ATX (valikuline) Laienduspesad: 7 I / O-paneel: 2x USB 2.0 (sisemine ühendus) 1x USB 3.0 (sisemine ühendus) 1x heli sisse / välja RGB / lähtestamise lüliti GPU maksimaalne pikkus: 335 mm (AIO kasutamisel 310 mm) Maksimaalne protsessori jahuti kõrgus: 160 mm Maksimaalne PSU pikkus: 180 mm
Product kirjeldus: CORSAIR iCUE 5000X RGB - Torn - ATX Product Type: System cabinet Form Factor: Torn värv: valge I/O Ühendusi: 2 x USB 3.0 1 x USB-C 3.1 1 x headphone/microphone Supported Motherboards: ATX, microATX, Extended ATX, ITX System Cabinet Features: Side panel dust filter, top panel dust filter, front dust filter, Direct Airflow Path design, toetab 120 mm radiator in rear, tempered glass side panel, PSU dust filters, tempered glass front panel, tempered glass top panel, toetab 280/360 mm radiator in front panel, toetab 280/360 mm radiator in top panel, RGB lighting system, removable dust filters Power Device: No toiteplokk Specification Compliance: ATX mõõtmed (WxDxH): 24.5 cm x 52 cm x 52 cm kaal: 13.84 kg Manufacturer Warranty: 2-year garantii
Product kirjeldus: ZALMAN Z-MACHINE 500 - MDT - extended ATX Product Type: System cabinet Form Factor: Mid Torn I/O Ühendusi: 2 x USB 2.0 2 x USB 3.0 1 x USB-C 3.1 1 x microphone 1 x kõrvaklapid Supported Motherboards: ATX, microATX, Mini-ITX, Extended ATX System Cabinet Features: kaabel management system, tempered glass side panel, airflow channels, tempered glass front panel, tempered glass top panel, toetab 120/240/280 mm radiator in top, toetab 120/240/360 mm radiators in front, Razer Chroma RGB, ARGB controller Power Device: No toiteplokk mõõtmed (WxDxH): 28 cm x 63 cm x 60.2 cm kaal: 10.5 kg
Cabinet Form Factor: Micro Torn Mainboard Form Factor1sisseehitatud Devices: LED Indicator Power Button Supported Mainboard Form Factor15.25-inch External Drivesahtleid: 12.5-inch Internal Drivesahtleid: 3 Maksimum Fans toetatud Quantity1(USB 3.0 (type A)) USB 2.0: 1(USB 2.0 (type A)) mikrofon-In: 1(3.5-mm minijack) Headphones: 1(3.5-mm minijack) Power seadme tüüp: toiteplokk Optional CPU Cooler Maksimum kõrgus140 mm Expansion Card Max pikkus: 290 mm kaasastarvikud180 mm Nominal kaal: 2.22 kg garantii Products Returnable1Box kaal Brutto (kg): 2.72 kg Retail Packaging Netokaal Carton1EAN Code: 4260455645881
"Zalman S3 ATX Mid Tower PC korpus 120 mm ventilaatoriga on loodud pakkuma täiuslikku kombinatsiooni funktsionaalsusest ja stiilist PC ehitajatele, kes otsivad usaldusväärset ja esteetiliselt meeldivat korpust. See keskmise suurusega torni korpus pakub piisavalt ruumi paljudele kaasaegsetele komponentidele ja ühilduvust ATX, Micro-ATX ja Mini-ITX emaplaatidega. Korpuse elegantset välimust täiendab minimalistlik esipaneel, millel asuvad kõige olulisemad sisend- ja väljundipordid, mis teeb selle igapäevaseks kasutamiseks kergesti ligipääsetavaks. Disain sisaldab läbimõeldud õhuvoolusüsteemi koos eelpaigaldatud 120 mm ventilaatoriga, mis juhib tõhusalt soojuse hajutamist ja aitab säilitada komponentide optimaalset temperatuuri. Lisaks saab korpusesse paigutada mitu jahutusventilaatorit ja radiaatorit, mis võimaldab kasutada täiustatud jahutuslahendusi, näiteks vedelikjahutussüsteeme, näidates selle mitmekülgsust ja tulevikupotentsiaali. Korpuse sisemuses on avar sisemus, mis mahutab pingevabalt suure jõudlusega videokaarte, mitut draivi ja toiteallikaid. Kaablijuhtimist hõlbustavad strateegiliselt paigutatud kaablijuhtimise avad ja suur vaba ruum emaplaadiplaadi salve taga, mis aitab kasutajatel luua puhta ja korrastatud disaini. Oma kaasaegse esteetika ja funktsionaalsusega on Zalman S3 ideaalne nii algajatele ehitajatele kui ka kogenud entusiastidele, kes otsivad korpust, mis pakub nii stiili kui ka sisu. Selle väärtusele orienteeritud disain teeb sellest populaarse valiku mängijatele ja professionaalidele, kes vajavad oma kõrgekvaliteediliste komponentide jaoks usaldusväärset korpuslahendust, säilitades samal ajal korraliku ja tõhusa seadistuse.
The Thermaltake AH T600 is a helicopter styled open frame full tower case which comes with two 5mm tempered glass panels on left and right sides and can support motherboards up to E-ATX (up to 10.5'' wide).
Umrüstkit-Kit für den Lian Li O11 Dynamic Mini Midi-Tower, Riser-Kabel mit PCIe 4.0, PCI-Slot-Blende inklusive, für den vertikalen Einbau der Grafikkarte
The outstanding and eye-catching hair-line design of the front panel of this brand new mATX chassis, transports a brushed aluminum feeling thereby blending perfectly into both Home and Office environments. mATX, CHIEFTEC case Driver bay ext.: 3x 5,25"/ 1x 3,5" - int.: 3x 3,5" / 1x 2,5" 2x USB 3.0, Mic-in, Audio-out (AZALIA / HD-Audio) Cooling (optional): 1x 92mm on the rear, 1x 120mm on the front, 2x 120mm on the left side panel install VGA card lenght (max): 280mm
XPG VALOR MESH C | CASE MIDITOWER ATX W/O PSU/VALORMESH4VW-WHCWW ADATA | MidiTower | PSU Not included | Front: 3 x 120mm Fans; Rear: 1 x 120mm Fan | Dimensions 460 x 210 x 371 mm
Modular big tower with 3 configurations, tempered glass side panels, supports graphics cards up to 423 mm, suitable for two large radiators, aluminum exterior panels, up to nine fans, 1x USB-C and 2x USB 3.0.
Tootekood: D31 STD BLACK SCGTIN: 6970620552491Korpused
Elegantes und vielseitiges mATX-Gehäuse, geschlossene Front für Silent-Builds, mit integriertem 8-Zoll-Display, Seitenteil aus Temperglas, bis zu 8 Lüfter und 3 Radiatoren möglich, für GPUs mit max. 400 mm Länge, versetzbares Netzteil für optimale Raumaufteilung
Full Tower CTE C750 TG ARGB case The CTE C750 TG ARGB is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, motherboard side and rear of the case. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for Centralized Thermal Efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE C750 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE C750 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. We provide cooling performance beyond your imagination! The CTE C750 TG ARGB is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, rear and motherboard side. Its dual-chamber design allows users to showcase key components and provides plenty of space for excellent cooling solutions, with the ability to accommodate up to 14 fans inside the case thanks to front, bottom and rear fan brackets and a top and side M/B vent. It also has lots of little details like swivel PCI-E slots, removable filters, a pump and tank bracket, and Velcro straps for easy cable management. Whether you're looking for a case for custom liquid cooling or a dual AIO setup, the CTE C750 TG ARGB is a high-end presentation case that allows you to imagine something outside the box. Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE C750 TG ARGB's versatile interior includes two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Maximum radiator support - up to 360mm/420mm radiators in multiple locations Our CTE C750 TG ARGB offers excellent cooling support for custom liquid cooling enthusiasts, there are various support locations and enough space to arrange your own configurations. Up to 5 radiators (three 360mm and two 240mm) can be mounted simultaneously on our CTE C750, providing incredible radiator support. To ensure AIO compatibility, radiators up to 420 mm/360 mm in diameter can be installed on the front, rear and motherboard side, giving PC enthusiasts unlimited possibilities for the perfect configuration. All your dream cooling components will fit! The CTE C750 Full Tower case has a huge fan and cooler installation capacity: up to fourteen 140 mm fans and 360 mm/420 mm AIO coolers in various locations. Moreover, equipped fan brackets at the front, bottom and rear ensure easy installation of all desired cooling components. Amaze your world with three pre-installed 140 mm CT140 ARGB fans The CTE C750 TG ARGB Full Tower case is equipped with three 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance. Perfect protection against dust There are small details on the top, front, bottom, rear and right side of the housing, removable filters that provide excellent dust protection and can be easily removed for cleaning.
