Tootekood: SKY TWO GX (W)GTIN: 4710562747768Korpused
Elegant airflow case in white by Montech, supports motherboards up to E-ATX, radiators up to 360 mm, tempered glass side panel with hinges, three pre-installed 140 mm ARGB fans.
Midi-Tower PC case in ATX form factor, made of steel and plastic, foldable side panel with magnetic closure, front made of fine mesh, GPU support up to 330 mm, suitable for 360 mm radiator
Nanoxia DS-9ARGB-W. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Understøttede diametre for frontventilatorer: 120,140 mm, Understøttede diametre for bagerste ventilatorer: 120,140 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 3.5", SSD-formfaktor: 2.5". Bredde: 215 mm, Dybde: 460 mm, Højde: 455 mm
Compact gaming case, made of high-quality steel, for SFX PSUs and Mini-ITX/Micro-ATX motherboards (Intel and AMD), GPU up to 363 mm and 2x 2.5-inch drives
Compact gaming case, made of high-quality steel, for SFX PSUs and Mini-ITX/Micro-ATX motherboards (Intel and AMD), GPU up to 363 mm and 2x 2.5-inch drives.
Horizon ARGB FLOW Midi White Three 140 mm ARGB fans are installed in the case at the front, pushing air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. 3 140 mm ARGB fans pre-installed on the front of the case. 1 120 mm ARGB fan pre-installed on the rear of the case. Glass side panel in the form of hinged doors. Airy front and top panels. 2 x USB 3.0 and 1 x USB-C. Screw-out PCI-E slot brackets. Possibility of mounting E-ATX motherboards. Ready for water cooling. Power supply tunnel. Available in fashionable white or elegant black. Four dust filters at the bottom, top, front and side of the case. Easily removable mesh on the front. Space for 4 hard drives (in a configuration of 2 SSD / 2 HDD or 3 SSD / 1 HDD or 4 SSD). ARGB fan controller. Your dream case is here, not over the horizon. MODECOM Horizon is one of those cases that fully meets the need for a decent, solidly made and functional computer case. This classic-looking case has a lot to offer. There are three 140 mm ARGB fans installed as standard at the front and one 120 mm ARGB at the back of the case. In addition, inside you will find plenty of space even for E-ATX boards, high CPU cooling and long graphics cards. And all this is closed behind a glass panel in the form of a door, surrounded by airy mesh panels with dust filters. The whole thing is enclosed in one, perfectly designed MODECOM Horizon case. Don't close yourself off to new things The side panel made of tempered glass in the form of an opening door is the very convenience of assembling and cleaning the computer. You can easily and conveniently open the door and assemble the set, replace RAM, graphics card and other components. There is no simpler and more convenient solution for assembling and modifying the interior of the computer and cleaning it, like the one used in the MODECOM Horizon case. Tempered glass, in turn, allows you to expose the installed graphics card and other expensive components. Nothing can stop this wind The case has three 140 mm ARGB fans installed on the front, which force air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. You get a case ready to use right out of the box, all you need to do is mount the components in it and work on a well-cooled and ventilated computer. Create a storm But that's not all, you can install additional 3 120 mm fans or 2 x 140 mm on the top of the case yourself. There is also the possibility of mounting two 120 mm fans on the motherboard wall. A computer configured in this way will be optimally cooled, ensuring that components operate at low temperatures, while contributing to their longer lifespan. Ready for anything The case is adapted to mount E-ATX boards. The wide possibilities of arranging and expanding the computer will work well in both gaming computers and professional solutions. The unlimited freedom of computer configuration allows for the installation of modern components with the possibility of further expansion. Games and programs will find their place here The MODECOM Horizon case has space for 4 hard drives. Two 2.5 SSD drives will find their place on the motherboard tray. Placed in a convenient place for connection, they will work great as media for games and programs. The disk basket in the power supply tunnel allows for the installation of two 3.5 HDD drives or a configuration of 1 x 2.5 SSD and 1 x 3.5 HDD. You can also simply put on 2.5 SSD drives and mount two such drives in the power supply tunnel. If you add space for M.2 drives on the motherboard, the MODECOM Horizon computer will become a real storage for games and documents.
Das AeroCool D301A Mini-Tower-Gehäuse kombiniert ein trendiges Mesh-Design mit Holzakzenten an der Front mit einer robusten SPCC-Konstruktion für Langlebigkeit. Es unterstützt ASUS- und MSI-m-ATX-Motherboards mit rückwärts gerichteten Anschlüssen, Flüssigkeitskühler bis zu 360 mm und GPUs bis zu 410 mm und bietet so ein leistungsstarkes PC-Baupotenzial in kompakter Form. Mit 11 Lüftersteckplätzen für optimale Kühlung, vielseitigen Speicheroptionen und praktischen E/A-Anschlüssen, einschließlich USB Typ C und USB3.0, ist dieses Gehäuse auf Leistung und Benutzerfreundlichkeit ausgelegt.
XPG BATTLECRUISER II ST. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Frontventiler installeret: 3x 120 mm, Understøttede diametre for frontventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 225 mm, Dybde: 506 mm, Højde: 550 mm. Pakkebredde: 339 mm, Pakkedybde: 643 mm, Pakkehøjde: 615 mm
White case with 270° tempered glass side panel Optimal cooling options with up to nine fans and radiators up to 420 mm Spacious interior for versatile high-end motherboards up to E-ATX Space for graphics cards up to 460 mm and CPUs with a height of up to 170 mm Installation of up to nine SSDs provides extensive storage options Supports motherboards with back-connect (ATX, mATX) Modular design simplifies assembly The TRYX LUCA L70: Midi-Tower for gaming PCs with maximum power The TRYX LUCA L70 is a large midi-tower that impresses not only with its variety of hardware possibilities but also with its timeless design that fits into any setup. The tempered glass on the front and side puts your high-end build in the spotlight—ready to earn true admiration. With the LUCA L70, you are perfectly equipped to build your gaming PC exactly the way you want. This midi-tower not only offers you more than enough space to cool your hardware, but it can also be easily disassembled and reassembled. Building your high-end system has never been so easy! Comprehensive cooling options for your new build When you assemble your own PC, cooling is one of the most important points to consider. The LUCA L70 allows you to install up to nine fans: two 120 mm or 140 mm fans on the top, three 120 mm or 140 mm fans on the side, three 120 mm or 140 mm fans on the bottom, and one 120 mm fan at the rear. Note that in this configuration, the power supply must be mounted on the top of the case. If you prefer to mount the PSU at the bottom, three fans can be installed on the top, and only one on the bottom. Water cooling enthusiasts won't be disappointed either: radiators up to 420 mm can be installed in several places. If the PSU is mounted on the top, you can fit a radiator up to 240 mm there and up to 360 mm at the bottom. If the PSU is mounted at the bottom, there is room for a 420 mm radiator on both the top and the side. To prevent dust from accumulating unnecessarily inside the case, there are dust filters on the top and the bottom. This ensures significantly longer hardware lifespan and saves you time and annoying cleaning. Thanks to the numerous options for installing fans and radiators, efficient cooling is guaranteed, ensuring your high-end hardware always operates at peak performance. Additionally, the tower stands 4 mm off the ground on X-shaped legs, further improving airflow. Case for powerful hardware To ensure even the most demanding games run smoothly on high settings, the LUCA L70 supports powerful graphics cards up to 460 mm in length. An included GPU bracket ensures the card doesn't suffer due to gravity. Vertical installation of the graphics card is also possible, but the necessary accessories must be purchased separately. The midi-tower is compatible with motherboards up to E-ATX and up to 280 mm wide. To avoid messy cabling, motherboards with rear connectors are also supported when the PSU is in the top position, but only in ATX or Micro-ATX format. The CPU height should not exceed 170 mm, while the power supply should be a maximum of 190 mm long. To ensure enough storage for your programs and games, up to nine 2.5-inch drives can be mounted on the side in the LUCA L70. Toolless assembly and disassembly To make installing and swapping your hardware as easy as possible, the LUCA L70 is designed to be completely modular. The front, side, and other parts can be removed and reassembled without additional tools. The motherboard tray can also be repositioned, allowing you to install the motherboard, CPU, and CPU cooler independently of each other.
Der Aerocool D501A bietet dir genug Platz für deine High-End-Komponenten. Dabei wird deine Gaming-Hardware durch die umfangreichen Kühloptionen effektiv gekühlt. Zudem ermöglicht das Tempered Glass an der Seite einen großzügigen Einblick in das Innenleben deines Gehäuses. Eine Holzverschönerung an der Front rundet das Gesamtbild ab. Leistungsstarke Hardware benötigt eine ebenso leistungsstarke Kühlung, die eine Überhitzung verhindert. Im Aerocool D501A lassen sich dementsprechend bis zu 11 Lüfter einbauen. Die Vorderseite unterstützt den Einbau von drei 120 oder 140 mm großen Lüftern, während am Deckel drei 120-mm- oder zwei 140-mm-Lüfter möglich sind. An der Seite, sowie auf der Netzteil-Abdeckung kannst du zwei weitere Lüfter der Größe 120 mm einbauen. Zusätzlich lässt sich an der Hinterseite ein weiterer 120-mm-Lüfter montieren. Die vier verbauten ARGB-Lüfter lassen sich ganz nach deinen Wünschen anpassen und sorgen für einen guten Luftfluss im Gehäuse. Der Midi-Tower unterstützt den Einbau von Grafikkarten bis zu einer Größe von 400 mm. Damit sind demzufolge auch die aktuellen NVIDIA GPUs der 50er-Generation möglich. Mainboards sind bis zum ATX-Format realisierbar. Der CPU-Kühler sollte eine Höhe von 171 mm nicht überschreiten. Beim Netzteil dagegen sind dir kaum Grenzen gesetzt, denn dieses darf bis zu 220 mm lang sein.
Small case for simple systems Two low-profile expansion slots for graphics cards Supports ITX-sized motherboards and CPU cooler height up to 38 mm Power supply: 1U Flex up to 150 mm One USB-C port on the I/O panel The Jonsbo NV10 in detail The Jonsbo NV10 is a small case that can be placed on a desk thanks to its lightweight design, and its simple black aesthetic fits into any setup. You can connect an external device to the USB-C port on the I/O panel. Hardware options The mini-tower supports installing ITX-sized motherboards. The CPU cooler should not exceed a height of 38 mm. The two low-profile expansion slots allow the installation of a low-profile graphics card up to 190 mm in length. When it comes to the power supply, only a 1U Flex power supply is supported, which should not be larger than 150 mm.
Darflash FT350 computer case + 5 aRGB fans (black)Darkflash FT350 is a compact computer case designed for users who appreciate both aesthetics and functionality. It is equipped with three transparent tempered glass panels and five ARGB fans, so it perfectly combines cooling performance with a modern gaming design. It's also compatible with a wide range of popular components, so you can build a computer perfectly suited to your needs.Robust and spacious designThe FT350 case is made of durable metal (0.5 mm SPCC steel), which ensures its stability and strength. Despite its small size, it is very spacious - it allows you to mount a graphics card up to 330 mm long, a PSU up to 160 mm long and a CPU cooler up to 157 mm high. It also features compatibility with M-ATX and ITX motherboards. All this makes it easy for you to assemble a high-performance gaming or office PC!Advanced cooling systemThe FT350 allows you to create an extensive heat dissipation system - it will accommodate up to 7 fans. You can also install 240 mm water cooling in it. All this will allow you to freely play dynamic games or create complex graphics projects - without worrying that the computer will overheat! What's more, you'll find five powerful ARGB fans included, which are distinguished not only by their high efficiency, but also by their modern, stylish design.Various storage optionsThe Darkflash FT350 enclosure can support two 2.5" SSDs or one 3.5" HDD, allowing you to flexibly customize your storage. This is ideal for those who plan to store a lot of files, such as photos, videos or documents.Key ports and buttonsThe FT350's top panel features one USB 2.0 port and one USB 3.0 port for high-speed data transfer. So you can conveniently transfer files and connect peripherals of your choice! There is also an audio jack port, a Reset button and a power button.Unique panoramic perspectiveThe case is distinguished by three transparent panels made of tempered glass, so it provides a wide, panoramic view of the computer interior. Such a solution allows you to highlight individual components in an original way! For example, use components with RGB backlighting to give your equipment a unique gaming character. ManufacturerDarkflashModelFT350Housing typeMini TowerSide panelTempered glassMotherboard standardM-ATX / ITXSlots for internal disks / drives3.5" HDD x1 / 2.5" SSD x2Expansion card slots4Maximum PSU length160 mmMaximum length of graphics card330 mmMaximum height of CPU cooler157 mmMaximum number of fans7Fan mounting optionsTop: 2x 120 mm fan; Side panel: 2x 120 mm fan; Bottom: 2x 120 mm fan; Rear: 1x 120 mm fan;Water cooling mounting optionsTop: 1x 240 mm water cooling;Number of fans installed5Buttons and controlsPower button, Reset buttonConnectors1x audio jack, 1x USB 3.0, 1x USB 2.0Material0.5 mm SPCCColorBlackIncluded accessories5x ARGB fanHeight375 mmWidth280 mmDepth350 mmWeight4 kg
Tootekood: D32 PRO MESH BLACKGTIN: 6970620554341Korpused
With the D32 series, Jonsbo targets everyone who wants to build their system in a space-saving manner. Unlike the D32 STD, the D32 PRO PC case is aimed at the high-end segment with special and practical features such as back-connect and improved front I/O. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for back-connect motherboards Mesh side panel for a subtle appearance Plenty of space for cooling solutions allows the installation of powerful hardware Three dust filters protect your hardware from annoying dust particles The Jonsbo D32 PRO Mesh: Compact and subtle case for high-end hardware Whether midrange HTPC or high-end PC – builds of all types fit comfortably in the D32 PRO Mesh by Jonsbo. The minimalistic case accommodates graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height. In back-connect mode, only the maximum CPU cooler height is reduced by about seven millimeters. Thus, despite the compact design of the case, adequate cooling for your hardware is ensured. Working with up to six 120 mm fans or one 120 mm and four 140 mm fans, airflow inside the case is enormous. No cable clutter with back-connect With back-connect motherboards, such as those from ASUS’s BTF series, MSI’s PROJECT ZERO series, or GIGABYTE’s Stealth series, the case in B-mode, with approximately six to seven millimeters more space, is nearly free from visible cable clutter. Since most power and connection cables can be plugged in at the back of the motherboard, you save on cable management while still maintaining a clean look inside your case. Powerful cooling in a small space To ensure your high-performance hardware is sufficiently cooled in such a compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans providing sufficient airflow, a large dual-tower CPU cooler, or even an installable 240 mm AiO, your hardware stays cool – even under load. Three dust filters at the front, top, and bottom make sure your hardware stays free from dust and dirt. This keeps your temperatures always at an optimal level and also extends the lifespan of your hardware.
Micro-ATX case, innovative front-mounted power supply, GPU support up to 430mm, space for up to seven 120mm fans, dedicated radiator chamber, glass panels on front and side, includes three 120mm reverse fansThe Phanteks XT V3 combines a compact design with generous room for modern hardware. With stylish glass panels and robust cooling, your gaming setup becomes a true showcase. Compact Micro-ATX case: ideal for modern builds Ample space: supports GPUs up to 430mm in length Optimized for cooling: up to seven 120mm fans or a 360mm radiator Compatible: supports back-connect motherboards Showcase design: tempered glass panels on the front and side The Phanteks XT V3: Compact Mini Case with Ample Space Phanteks XT V3 Case Thanks to its compact form factor, the Phanteks XT V3 can be easily integrated into a wide variety of gaming or professional setups—while still offering excellent support for modern hardware. The spacious interior accommodates Mini-ITX and Micro-ATX motherboards and supports back-connect designs. High-performance GPUs fit easily as the Phanteks XT V3 provides four PCIe slots and space for GPUs up to 430mm. The rear chamber impresses with an innovative design for premium hardware. Instead of the usual position, the PSU is relocated to the top front. This enables the Phanteks XT V3 to support full-sized ATX power supplies, ensuring greater compatibility. Powerful Cooling Phanteks XT V3 The Phanteks XT V3 delivers outstanding cooling performance. Seven mounting points for 120mm fans—three at the top, three at the bottom, and one at the rear—enable efficient airflow layouts. Out of the box, three powerful M25-120 reverse DRGB fans at the base provide excellent cooling. Additionally, the Phanteks XT V3 features a dedicated top chamber for a 360mm radiator. This makes it easy to install a high-performance AIO cooler, keeping even high-end CPUs reliably cool during the most intense gaming sessions. Showcase Case Phanteks XT V3 With the Phanteks XT V3, you can perfectly display both your hardware and your building skills. The rear chamber offers ample space for cable management along with smart routing options for a tidy system. Completing the look are tempered glass panels on the front and side, providing an unobstructed view of your components from any angle. Comprehensive I/O Panel Phanteks XT V3 The Phanteks XT V3 provides excellent support for your gaming setup thanks to its front I/O panel on the bottom right. It features both a USB Type-A and Type-C port with USB 3.2 Gen 2x2 standard. Additionally, a 3.5mm combo audio jack is available for your gaming headset.
Tootekood: F1 WHITE + 6 FANSGTIN: 4711527006098Korpused
Darkflash F1 computer case (White) + 6 ARGB fansDarkflash F1 is a midi tower computer case created for gamers and custom build enthusiasts. Its modern design with a large tempered glass panel allows to display components in an interesting way and looks great on gaming workstations. It is also distinguished by its spacious interior, which can easily accommodate selected components. It is a combination of elegant design and practical solutions that make assembling and using the computer a real pleasure. The kit also includes six ARGB fans.Spacious interiorDespite its compact size (436 x 240 x 436 mm), the case offers plenty of space for components. It will accommodate graphics cards up to 350 mm in length and CPU coolers up to 200 mm in height. There are also five slots for expansion cards. You can also fit an M-ATX or ITX motherboard and three HDDs or SSDs. So you can easily build both a high-performance gaming PC and a workstation for creative work.Efficient coolingThe Darkflash F1 case supports extensive cooling systems - both air and water. It allows the installation of up to nine fans or a 360/280 mm heatsink. In addition, holes located on the top and rear panels ensure optimal airflow. So you can play dynamic games or use demanding programs without worrying that your computer will overheat! In addition, you will find six ARGB fans in the set, which not only guarantee effective cooling, but also look great - they will give your configuration a unique character.Useful connectors at your disposalA set of useful connectors - two USB-A 3.0 ports, one USB-C port and HD Audio - is located at the bottom of the case. So you can freely connect peripherals, transfer files or use headphones! This makes everyday computer use even more convenient, whether you are gaming, working or streaming.Solid construction and designThe case is made of high-quality SPCC steel with a thickness of 0.8 mm, which guarantees its durability and stability. In addition, tempered glass panels expose the interior, and the whole unit looks extremely modern - a solution that looks great on a gamer's desk and beyond.IncludedComputer caseFan x6 ManufacturerDarkflashModelF1Housing typeMidi TowerSide panelTempered glassMotherboard standardM-ATX, ITXSlots for internal drives3.5" HDD x3, 2.5" SSD x3Expansion card slots5Max PSU length200 mmMax length of graphics card350 mmMax height of CPU cooler200 mmMax number of fans9Fan mounting optionsSide: 120 mm x2; Rear: 120 mm x1/140 mm x1; Top: 120 mm x3/140 mm x2; Bottom: 120 mm x3;Water cooling mounting optionsTop: 360 mm / 280 mmNumber of fans installed6Type of fansARGBButtons and controlsPower, ResetConnectorsUSB-A 3.0 x2, USB-C x1, HD audioMaterial0.8 mm SPCCColorWhiteHeight436 mmWidth240 mmDepth436 mm
Tootekood: P40 PRISM PLUS BLACKGTIN: 8800263650644Korpused
P40 Prism Plus Black Case Showcase your build with dazzling design The P40 Prism PLUS, with three tempered glass panels, creates a sense of openness and enhances your system build with a modern aesthetic. Premium Tempered Glass Panels Using 4 mm thick tempered glass, the P40 Prism PLUS offers exceptional durability. Uninterrupted panoramic view with three-sided tempered glass A new design paradigm eliminates the case frame, providing an open-space feel and an unobstructed view. The front, side, and top tempered glass panels create a seamless look. Tool-free tempered glass panels The front, side, and top panels can be easily and fully removed, providing convenient access to your PC components. The top glass panel uses a thumb screw for easy handling. Easy panel management with bottom mounting groove The new tapered, tool-free mounting mechanism allows panels to be attached and removed easily, while preventing panel deformation from impacts. Sturdy triangular support structure The solid triangular glass mounting structure can hold up to 35 kg, ensuring stability for all three glass panels. Full-mesh side panel for optimal airflow The ventilation opening on the full-mesh side panel sits above the motherboard, providing optimal airflow. Efficient cable management with optimal routing design A 33 mm cable space helps keep cables organized. Convenient layout and spacing make cable management simple and maintain a clean look. Rubber grommets for neat cable management The well-designed cable layout makes it easy to keep cables tidy and ensures a sleek, organized appearance.
Limited Metaphor: ReFantazio edition of the Y70, featuring panoramic glass with four character designs, vertical GPU with PCIe 4.0 riser, powerful cooling, and a dual-chamber design The HYTE Y70 Metaphor: ReFantazio Edition is a limited showcase case for fans of Metaphor: ReFantazio and discerning PC enthusiasts. It combines the renowned Y70 design with character artwork of the four protagonists, premium materials, and maximum hardware compatibility. Limited Metaphor: ReFantazio Edition with four character designs Three-piece panoramic glass beautifully displays hardware and graphics card Vertical GPU mounting with PCIe 4.0 riser for a clean look and optimal presentation Dual-chamber interior separates hardware and cables for improved airflow Extensive cooling options for air and water cooling—even for high-end systems Limited design for Metaphor: ReFantazio fans The Metaphor: ReFantazio Edition features detailed character graphics and a subtle burgundy design on the Y70 case. Gold accents and lettering emphasize the elegant appearance. The panoramic glass makes this case a highlight in any desk setup. Ample space for powerful hardware The Y70 supports motherboards up to E-ATX and can accommodate graphics cards up to 422 mm in length. With support for 4-slot GPUs, there’s also room for particularly large graphics cards. CPU coolers up to 180 mm and power supplies up to 235 mm fit easily inside the case. Strong cooling and thoughtful design Support for up to ten fans or multiple 360 mm radiators ensures efficient cooling. The dual-chamber design streamlines cable management and keeps the showcase area tidy. Tool-less panels and modular mounts make assembly and maintenance especially convenient.
Das UNC-409S-AIO 4U Rackmount-Gehäuse wurde für höchste Zuverlässigkeit und Leistung in anspruchsvollen Industrieumgebungen entwickelt. Gefertigt aus 1,2 mm starkem SGCC-Stahl, bietet es optimalen Schutz der Hardware und stellt eine langlebige, flexible Lösung für verschiedenste Konfigurationen dar. Für eine verbesserte Kühlleistung unterstützt das Gehäuse den Einbau einer 360 mm All-in-One (AIO) Wasserkühlung und ermöglicht so eine effiziente CPU-Wärmeabfuhr. Es ist mit verschiedenen Mainboard-Formfaktoren kompatibel, darunter SSI-EEB, und erlaubt somit leistungsstarke Systemkonfigurationen. Zur Stromversorgung kann wahlweise ein Standard-ATX-Netzteil oder ein Mini-Redundant-Netzteil eingesetzt werden, um auch bei kritischen Anwendungen eine stabile und redundante Stromversorgung sicherzustellen.
The APNX V2-F is a premium PC case designed for excellent cooling, elegant aesthetics, and flexibility. Its three removable tempered glass panels provide a frameless panoramic view, while the X-Pand Flow design significantly improves overall airflow dynamics. With support for up to 13 fans, 360 mm radiators, and two 16 cm fans at the bottom, it delivers top-class thermal performance. The V2-F supports standard motherboards with reverse connectors for cleaner cable management. Features such as a GPU holder, removable motherboard cable cover, and an interchangeable PSU/HDD compartment enhance durability and customization options. With vertical or horizontal 360 mm AIO mounting and support for the APNX 10-port fan hub, the APNX V2-F offers efficient cooling and effortless customization for high-performance builds.
The STAGE MIRROR is more than just a PC case—it is a stage for your personal expression. With its distinctive, forward-facing mirrored platform, the STAGE MIRROR is designed for creatives, collectors, and enthusiasts who value both performance and individual style. This unique design transforms your system into a personal gallery, putting story and style at the forefront. To deliver exceptional thermal performance, the case supports fan sizes from 120 mm up to 200 mm and can accommodate up to twelve 120 mm fans—six on top and six on the bottom. It also supports radiators up to 360 mm, meeting the cooling requirements of high-end, custom liquid cooling setups. The case is compatible with Mini-ITX, Micro-ATX, and ATX motherboards, including BTF layouts (Back-Connect) within the ATX form factor. It includes a high-quality PCIe 5.0 riser cable, enabling vertical GPU installation and offering both next-generation performance and enhanced presentation right out of the box. The Stage Mirror supports GPUs up to 430 mm long and power supplies up to 210 mm long, making it suitable for flagship components with no compromises. With USB 4.0 Gen 2x2 Type C (up to 20 G) and 2x USB 3.2 Gen 1 Type A ports (up to 5 G), you get ultra-fast data transfer and future-proof accessibility.
Der H2 Flow ist ein kompaktes 20,7 l vertikales Mini‑ITX‑Gehäuse, entwickelt für leistungsstarke Small‑Form‑Factor‑Builds. Es unterstützt GPUs bis zu 331 mm und Flüssigkeitskühler bis zu 280 mm, mit ultra‑feinen Mesh‑Paneelen für maximale Luftzirkulation. Ein Seitenpanel aus Glas und Mesh setzt deine Komponenten in Szene, während werkzeugloser Zugang und intelligentes Kabelmanagement den Zusammenbau einfach machen. Eine geteilte Seitenwand kombiniert gehärtetes Glas, um Ihre Komponenten optimal in Szene zu setzen, mit darunterliegendem Mesh-Gewebe für maximale Luftzirkulation. Speziell entwickelt, um die Pumpenkappen von NZXT Kraken AIO-Wasserkühlungen – wie beispielsweise die Kraken Elite 280 RGB – perfekt in Szene zu setzen. In das Gehäuse passen GPUs bis zu 331 mm, einschließlich vieler der aktuell leistungsstärksten Karten wie der RTX‑50‑Serie. Ultra‑feines Mesh maximiert den Luftdurchsatz und filtert Staub, damit Komponenten kühl und sauber bleiben. Integrierte Kabelführungs‑Punkte und Klettbänder machen es einfach, Kabel ordentlich zu halten, verbessern den Luftstrom und das Aussehen deines Builds.
The CHIEFTEC BW-01B-OP is a high-performance ATX workstation case that combines a timelessly elegant front panel with a modern door design and functional front I/O, including a USB Type-C port. It comes pre-installed with a 120mm PWM-HDB fan, ensuring quiet and long-lasting operation. An easily removable drive cage system allows for flexible use and meets the requirements of digital content creators as well as their long-term data storage needs. Cable management openings with rubber grommets provide a tidy build and efficient airflow. Designed for modern workstation systems, the BW-01B-OP combines performance and style in an elegant, professional case.
The IPC SC-4004 is a case built for Mini-ITX Mainboards and has a quadruple Hot-Swap-frame for HDDs. A serial 120mm fan in the back of the case ensures a reliable and optimal cooling.The power supply inside the IPC SC-4004 is an optional Flex-ATX PSU which is mounted upright in the right part of the case. Also the case offers the option of an additional plug-in card (for example graphic card).KujutegurSmall Form Factor (SFF)TüüpPCMaterjalTeras3,5" lahtrite arv4Emaplaadi toetatud kujuteguridMini-ITXToote värvMustAknagaEi2,5" salvede arv5Sisemiste 2,5" salvede arv1Materjali paksus1 mmLaienduspesade arv1Toetatud elektritoite tarne vormi faktoridATXUSB 3.0 (3.1 Gen 1) A-tüüpi portide hulk1AudiosisendEiAudioväljundEiInstallitud tagaventilaatorid1x 120 mmToetatud tagaventilaatorite läbimõõt120 mmToetatud kõvakettasuurused2.5,3.5"Toetatud kõvaketaste arv5KäigultvahetusJahLED-indikaatoridTegevus, HDD, VõimsusLaius220 mmSügavus260 mmKõrgus190 mmKaal3,87 kgPakendi laius270 mmPakendi sügavus335 mmPakendi kõrgus280 mmPakendi kaal4,44 kg
Case type: Cube Case, Midi-Tower Form Factor: Micro-ATX, Mini-ITX Colour: Black Main colour: Black Accent colour: Gold Noise dampening: No Width(exact): 260 Height(exact): 190 Depth(exact): 280 Width: 200 - 300 mm Height: 100 - 200 mm Depth: 200 - 300 mm Material: Plastic, Steel Weight (exact): 2 Weight: up to 2 kg, 2 - 4 kg USB: 2x USB 3.0: 2x Audio output: 1x Audio input: 1x Internal 2.5" bays: 4x Internal 3.5" bays: 3x PCI slots: 2x Motherboard tray: no Remote: no Cable management: no Front LCD/TFT display: no Filter: no Power supply: no Power supply format: ATX Power supply position: Rear Lower Fans pre-installed: 1x 120mm 120mm Fan: 1 Fan colour: Black Fan controller: no Card reader: no Front door: no Hot-swap: no Position I/O: Front/Cover HDD anti-vibration: no Radiator-mounting: no Lighting: no
