With the Lian Li O11 Dynamic Mini V2 Flow, your gaming setup is sure to stand out: Despite its compact design, this mini case offers a spacious interior with enough room to make your vision a reality. Whether you opt for air cooling, an AiO water cooling system, or vertical GPU installation—this case can handle it all and much more. Compact design: Takes up less space on your desk Room for high-end hardware: Generously designed interior allows the installation of powerful components Clean cable management: Cable holders and support for motherboards with back-connect design for tidy cable routing Includes GPU brackets: Graphics card can be installed vertically or horizontally Dust protection: Easy-to-clean dust filters at multiple locations Five pre-installed fans: Three 120 mm reverse-blade fans at the bottom and two on the side The Lian Li O11 Dynamic Mini V2 Flow: A mini case designed for high-performance gaming hardware Lian Li O11D Mini V2 Flow with sample hardware Featuring tempered glass on the side and front, the Lian Li O11 Dynamic Mini V2 Flow lets you showcase your hardware. Its compact size allows it to sit comfortably on your desk and become the centerpiece of your gaming setup—all without annoying cable clutter inside the case. Clean cable management for a tidy look Lian Li O11D Mini V2 in white with cable straps Thanks to multiple cable holders, the case enables clean cable routing. A built-in bracket for the heavy 24-pin ATX cable ensures it stays neatly in place, while cleverly positioned straps keep all other cables organized. The drive cages can also double as a hiding spot for cables. This makes cable management effortless—perfect for both beginners building their first gaming PC and pros tired of spending hours on cable routing. Flexible installation for motherboards and AiO water coolers A vertically adjustable motherboard standoff offers you more flexibility when installing the motherboard and AiO water coolers. You can choose between two motherboard positions: The top position supports 240 mm and 360 mm AiO liquid coolers, while the bottom position also allows for a 280 mm radiator. Well cooled, even under full load Supports up to nine fans Space for two water cooling radiators Mesh panel on the top Dust filter on the bottom The fans and radiators provide sufficient cooling for your gaming hardware, even under maximum load. A mesh panel and dust filter help reduce dust build-up inside the case, prolonging the life of your components. Lian Li O11D Mini V2 Flow fans The Flow version of the O11D Mini V2 comes with five fans pre-installed. These 120 mm fans feature reverse blades, ensuring a clean look without sacrificing essential airflow. Ready for peak performance with enough space for large GPUs The interior of the tower is designed to accommodate even large graphics cards up to 400 mm in length—whether mounted horizontally or vertically. The included GPU brackets ensure a secure hold in both scenarios, giving you the freedom to choose your preferred GPU orientation. Supports motherboards in Mini-ITX, mATX, and ATX form factors—including models with rear cable management using a back-connect design. Combined with well-thought-out cable holders and Velcro straps, the result is a tidy, clean look with all cables elegantly routed to the back of the motherboard. Modular I/O panel Lian Li O11D Mini V2 I/O panel The I/O panel module can be attached either on the top or at the bottom front. This lets you place the case wherever you want and still have easy access to the button and ports. If you position the panel on the top, the bottom cover is also removable—improving airflow.
Midi-tower case with four pre-installed D-RGB fans 360mm radiator support at the top for optimal cooling performance Compatible with ASUS BTF and MSI Project Zero motherboards Tempered glass side window for an unobstructed view of your components Glacier One 360M25 Gen2 with powerful pump and RGB lighting Three quiet M25-G2 fans with high static pressure Integrated VRM fan on the pump cover High-quality build and optimized airflow Optimal Cooling Meets Stylish Design The XT Pro Ultra offers space for up to ten fans and supports radiators up to 360mm at the top. With four pre-installed 140mm D-RGB fans, it provides excellent airflow right out of the box. The mesh front panel and tempered glass side panel combine functionality with aesthetics. The Glacier One 360M25 Gen2 AiO cooler delivers excellent cooling performance thanks to its powerful pump and three optimized 120mm PWM fans—ideal for high-end Intel and AMD CPUs. Integrated D-RGB lighting ensures a clean yet spectacular look. Room for High-End Components The XT Pro Ultra provides space for graphics cards up to 415mm in length and CPU coolers up to 184mm in height. The case is also ready for vertical GPU mounting and offers enough space for 2x 3.5" and 5x 2.5" drives. ATX and even E-ATX motherboards fit easily as well. Cable-Friendly, Modern Setup Thanks to support for rear-connector motherboards like ASUS BTF and MSI Project Zero, your system can be especially tidy. The Glacier One 360M25 Gen2 supports you with a single control cable for RGB lighting—for a clean build without cable clutter. Quiet & Powerful: The M25-Gen2 Fans The M25-Gen2 fans are designed for radiators and deliver high cooling performance at an ultra-quiet 35.13 dB(A)—with an airflow of 123.55 m³/h and a static pressure of 2.51 mmH2O. Rubber pads prevent disturbing vibrations and the PWM mode automatically adjusts the speed to requirements. With the Phanteks XT Pro Ultra & Glacier One 360M25 Gen2 bundle, you get a perfectly matched combination of case and water cooling, merging performance, cooling, and design at the highest level.
After introducing the RAVEN Z series in 2014 to great acclaim with the revolutionary RVZ01, the RAVEN team has created another segment defining design in the RVZ02. With a volume of only 12 liters, this case is not only slimmer but is actually easier to assemble compared to the RVZ01 or any other slim case before it. Similar to many SilverStone small form factor cases, there is plenty of room for a powerful graphics card up to 13 inches in length available while tool-less drive cages have been implemented to make assembly quicker than ever. With clever space utilization and engineering, two major heat sources of a PC are separated via the chassis’ main chamber so CPU and graphics card can each have their own airflow path. Despite its diminutive size, the RVZ02 is a remarkably versatile case that can be used anywhere from being a compact desktop workstation (in vertical orientation) to a living console or HTPC (in horizontal orientation), making it truly perfect for just about any slim PC build.- Highest performance capability in super slim form factor- Support graphics card up to 13 inches- Mini-ITX motherboard & SFX PSU compatible- Independent expansion slot design for easy assembly- Tool-less drive cage design- Fits in nearly any environment with horizontal or vertical orientationKujutegurSmall Form Factor (SFF)TüüpPCMaterjalPlast, TerasEmaplaadi toetatud kujuteguridMini-ITXToote värvMust, HõbeAknagaJah2,5" salvede arv2SobilikKodu/kontorMahutavus12 lLaienduspesade arv2CPU jahuti maksimaalne kõrgus5,8 cmGraafikakaardi maksimaalne pikkus33 cmToetatud elektritoite tarne vormi faktoridSFXToiteallikate arv1USB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendJahAudioväljundJahToetatud kõvakettasuurused2.5,3.5"Toetatud kõvaketaste arv2Laius380 mmSügavus370 mmKõrgus87 mmKaal3,3 kg
Ultrakompaktes Thin-Mini-ITX-Gehäuse, mit Rackmount-Frontblende, aus schwarzem Aluminium gefertigt, OEM-Version ohne Logo, extrem flach & passiv kühlend, zwei 2,5-Zoll-Slots, je zwei USB-3.0/2.0-Ports
The IPC SC-4100 is a case for Mini ITX Mainboards with a quadruple Hot-Swap rack for hard drives.One included 80mm fan, as well as an optional 40mm fan, cares for clean air and therefore for an impeccable cooling system.One Flex ATX or 1HU server power supply can be mounted. The slot opening is suitable for the mounting of a short flat graphic card. One 2.5" hard drive or one SSD can also be mounted. One lockable door completes this total package.KujutegurPüstikTüüpServerMaterjalTeras3,5" lahtrite arv4Emaplaadi toetatud kujuteguridMini-ITXToote värvMustAknagaEiPüstikmontaaž1UMaterjali paksus1 mmSisseehitatud kõlar(id)EiKaasas toiteplokkEiUSB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendEiAudioväljundEiMaksimaalne esiventilaatorite arv1Toetatud esiventilaatorite läbimõõt40 mmInstallitud tagaventilaatorid1x 80 mmMaksimaalne tagaventilaatorite arv1Toetatud tagaventilaatorite läbimõõt80 mmToetatud kõvakettasuurused2.5,3.5"KäigultvahetusJahLED-indikaatoridJahLähtestusnuppJahLaius194 mmSügavus200 mmKõrgus270 mmKaal2,66 kgPakendi laius315 mmPakendi sügavus245 mmPakendi kõrgus237 mmPakendi kaal3,08 kgKogus aluse kohta4 tk
No. of drive bays: 8 Weight: 6.52 Other features: CPU cooler height limitation: 170mm PSD length limitation: 170mm VGA length limitation: 260mm (With radiator on the right side) 366mm (Without radiator on the right side) Cooling System Front (Intake): 120 x 120 x 25mm Addressable RGB fan (1000rpm, 27.2 dBA) x 3 Rear (exhaust): 120 x 120 x 25 mm fan (1000rpm, 26 dBA) x 1 Fan Support Front: 3 x 120mm Top: 2 x 120mm, 1 x 140mm Rear: 1 x 120mm Right Side(In front of M/B Tray): 2 x 120 mm Bottom(On the power cover): 2 x 120 mm
Cabinet Form Factor: Midi Torn Mainboard Form Factor1Supported Mainboard Form Factor: ATXMicro ATXMini-ITX 3.5-inch Internal Drivesahtleid120mm USB 3.0: 1(USB 3.0 (type A)) USB 2.0: 2 (4-pin USB (type A)) Audio liides1(3.5-mm minijack x 2) Power seadme tüüp: toiteplokk Optional Power Device Location1Lisatarvikud: Screws Chassis Features10 mm kõrgus (mm): 425 mm laius (mm)195 mm Warranty Products Returnable: Jah garantii Term (month)1Box kaal Brutto (kg): 3.86 kg Retail Packaging Netokaal Carton1kg Packs in Box: 1EAN Code: 42604556436341
Ultrakompaktes Thin-Mini-ITX-Gehäuse, mit Rackmount-Frontblende, aus schwarzem Aluminium gefertigt, OEM-Version ohne Logo, extrem flach & passiv kühlend, vier interne 2,5-Zoll-Slots, je zwei USB-3.0/2.0-Ports
Kompaktes Thin-Mini-ITX-Gehäuse von Akasa, 1x 2,5-Zoll HDD/SSD, Vorbereitungen für 4x Serial Port, 2x USB 2.0 Typ A-Buchse, 2x 3,5-mm-Audio-Buchse, VESA-kompatibel
Vielseitiges Mini-ITX-Gehäuse mit Außenwänden aus Aluminium, für Mini-ITX- und -DTX-Boards, modulares Design und viele Konfigurationsmöglichkeiten, Radiatoren bis zu 240 mm, kompatibel zu ATX-Netzteilen, unterstützt 3-Slot-Grafikkarten bis 33 cm
