The Phanteks XT Pro Ultra PC case is not only affordable, but also especially versatile. It offers ample space for high-end hardware, generous cooling solutions such as 360 mm radiators, E-ATX motherboards, or even motherboards with rear connectors—for optimal cable management and maximum performance for your gaming PC. Midi-tower in a classic design for a subtle look and optimal cooling Supports motherboards with back-connect for clean cable management Optimal cooling performance with room for up to 10 x 120 mm fans and radiators up to 360 mm Supports high-end graphics cards up to 415 mm in length Tempered glass side panel for a direct view of your hardware Phanteks XT Pro Ultra: Midi-tower with optimal airflow and pre-installed power supply Whether you are an occasional gamer or a hardcore enthusiast, the Phanteks XT Pro Ultra is the right choice if you're looking for a subtle, versatile, and affordable midi-tower. The understated design combines versatility—such as the ability to install motherboards with back-connect—with powerful cooling performance and stylish D-RGB lighting. This version of the case lets you get started right away—a power supply is already installed. The included PSU is the Phanteks AMP GH, offering a total output of 850 watts to power high-end hardware. Together with up to 10 x 120 mm fans, your hardware is supplied with plenty of power and effectively cooled. Back-connect for optimal cable management For a stunning view through the tempered glass side panel, the XT Pro Ultra supports motherboards with rear connectors, or "back-connect." This allows important component cables to be routed to the hidden rear side, creating an especially clean appearance. Includes Phanteks AMP GH 850 Watt power supply Start building right away without worrying about powering your gaming PC—as this case comes with a pre-installed Phanteks AMP GH power supply, which is both safe and efficient. The total power output of 850 watts means your gaming PC is well equipped even for high-end hardware, with enough headroom for future upgrades. Optimal cooling performance for high-end hardware You can house your hardware with confidence in the Phanteks XT Pro Ultra—whether you're building on a budget or crafting your latest showcase. With space for ten 120 mm fans and support for 360 mm radiators, you'll have the right cooling solution for any hardware setup.
The JONSBO T7 Black is a stylish case for compact gaming and office systems. It is aimed at users seeking a portable setup with high-quality materials and efficient use of space. Striking design with real wood handle and aluminium structure Compact build with full Micro-ATX compatibility Supports GPUs up to 280mm and CPU coolers up to 165mm Thoughtful dual-chamber layout for clean airflow Modern front ports including USB-C for maximum connectivity Design & Materials The case combines 3 mm thick aluminium with fine wood accents, offering a successful blend of technology and design. The integrated handle makes transport easier and emphasises the case’s mobile focus. Space & Hardware Support The T7 supports graphics cards up to 280mm in length and CPU coolers up to 165mm in height. Power supplies up to 220mm deep also fit inside. Two 2.5-inch SSDs and an additional 3.5- or 2.5-inch drive can be integrated. Efficient Cooling & Connectivity Up to three 120mm fans provide effective cooling, while the dual-chamber layout separates heat sources. The I/O panel offers USB 3.0 and audio as well as a modern USB-C port for fast data connections.
USB 3.0 x 2, Mic x1, Spk x1, White, Mini-Tower, Power supply included No Thermaltake Core V1 Side window, USB 3.0 x 2, Mic x1, Spk x1, White, Mini-ITX, CA-1B8-00S6WN-00
Tootekood: SST-TJ04B-E USB 3.0GTIN: 4710713968189Korpused
Introduced in 2004, the TJ04 has been a main stable of SilverStone’s prestigious Temjin series of tower chassis. Its excellent original design needed only a few minor tweaks and improvements over the years to keep up with the demands of modern PC hardware. An important equation in keeping the TJ04 a popular choice among system builders was its understated and classic styling. So in designing the TJ04-E (Evolution), SilverStone engineers kept the exterior styling largely unchanged while vastly improving the internals.The power supply is now bottom-mounted with the ability to accommodate up to four 5.25” drives, nine 3.5” hard drives and six SSDs, raising the bar significantly for storage capacity in a mid tower format. In addition to increased storage capacity, the TJ04-E can also install cards up to 17 inches without the need to remove any hard drive cage, a feat usually accomplished in full towers. To make sure the myriad of component can operate effectively, the TJ04-E includes a custom cooling solution to reduce hard drive temperatures and two custom cables with built-in capacitors to facilitate cable management and improve drive stability.To finish up TJ04-E’s already impressive layout efficiency, design details borrowed from other great SilverStone products such as positive pressure and quick removable filters will enable users to easily maintain consistently high performance for years to come. So it is possible that TJ04-E, like its predecessor, will again be able to outlast many generations of PC builds.- Positive pressure design for effective dust reduction- Support eight expansion slots and extra long graphic cards up to 17 inches- Classically styled 7mm thick aluminum front panel- Quick access and removal for fan filters- Smart backside cable routing design- Motherboard back plate opening for quick CPU cooler assembly- Support up to nine 3.5” hard drives and multiple 2.5” drive slots- Built-in innovative hard drive cooler- Includes two custom SATA cable for improved cable managementFormat AT
Cabinet Form Factor: Midi Torn Mainboard Form Factor13.5-inch Internal Drivesahtleid: 2 2.5-inch Internal Drivesahtleid1Audio Line-Out: 1Lisatarvikud: RGB LED Strip Chassis Features15 mm Nominal kaal: 6.26 kg garantii Term (month)1Box kaal Brutto (kg): 7.59 kg Retail Packaging Netokaal Carton1kg Retail Packaging Netokaal Plastic: 0.05 kg Packs in Box1EAN Code: 4260455641
Extrem kleiner digital adressierbarer RGB-LED-Controller von aqua computer, für bis zu 90 LEDs, inkl. 32 cm RGB-LED-Strips mit 15 LEDs, mit internem USB-Kabel
Tootjainfo: http://kolink.eu/Home/case-1/midi-tower-2/refine.html Mõõtmed: 435 x 205 x 455 mm Materjal: Teras, karastatud klaas, alumiinium, plastik Kaaluge: umbes 5,9 kg Värv: Gunmetal Hall Vormitegur: E-ATX, ATX, Micro-ATX, Mini-ITX Toiteallikas: 1x tavaline ATX (valikuline) Laienduspesad: 7 I / O paneel: 1x USB 3.1 tüüp C (sisemine ühendus) 1x USB 3.0 tüüp A (sisemine ühendus) 2x USB 2.0 (sisemine ühendus) 1x heli sisse / välja 1x RGB- / lähtestuslülitit GPU maksimaalne pikkus: 380 mm Maksimaalne protsessori jahuti kõrgus: 160 mm Maksimaalne PSU sügavus: 200 mm
Dimensions: 410x205x440 mm (WxHxD) Material: Steel (case), tempered glass (side panel), plastic (front) Weight: approx. 5,5 kg Colour: Black Form factor: ATX, Micro-ATX, Mini-ITX Total possible fans: 3x 120 mm (front) 1x 120 mm (rear) Radiator Mountings: 1x max. 360 mm (front) 1x 120 mm (rear) Drive Bays: 2x 3,5/2,5“ max. (internal) 2x 2,5“ max. (internal) PSU: 1x Standard ATX (optional) Expansion slots: 7 I/O Panel: 1x USB 3.0 1x USB 2.0 2x 3,5 mm ports (1x Audio-In / -Out) RGB Controller Max GPU length: 310 mm Max CPU cooler height: 160 mm
Showcase-Gehäuse für WaKü-Enthusiasten, für XL-ATX-Mainboards, mit integrierter Distroplate aus Acryl, Grafikkarten bis 500 mm, Platz für 360 mm x 60 mm Radiatoren, 4x 2,5-Zoll-Festplatten, Seitenwände aus Aluminium
