Korpused

Darkflash M305 fanless computer case (Black)Darkflash M305 is a meticulously designed Micro-ATX computer case that combines compact dimensions with functionality and futuristic design. It was created for users looking for good value for money, without compromising on airflow, hardware compatibility and aesthetics. A transparent side panel made of tempered glass allows you to effectively display your components, which is sure to be appreciated by fans of RGB backlighting (Red, Green, Blue, a backlighting system based on three colors: red, green and blue) or elegant kits. From now on, your gaming space will look classy and stylish!Practical solutions for everyday useThe case is equipped with a side panel made of tempered glass, fixed with convenient thumb screws. This gives you quick and easy access to the computer's interior, without the need to reach for tools. This solution works great for both hardware upgrades and regular cleaning of the cooling system. The front of the case has a modern, openwork panel with vents, which not only gives the whole case a dynamic character, but most importantly helps air circulation, protecting components from overheating.Efficient cooling systemDarkflash M305 offers a lot of freedom when planning cooling - you can fit as many as 7 120 mm fans inside. Such an arrangement allows you to build a very efficient air cooling system, which translates into stable operation of the processor, graphics card and other components, even during intensive gaming or work on graphics programs. The layout of the fans can be customized to ensure even airflow throughout the case.Compact format, big possibilitiesAlthough the case has small external dimensions (325 × 195 × 387 mm), its interior has been designed for maximum space utilization. It will easily accommodate a graphics card up to 300 mm in length and a CPU (Central Processing Unit, CPU) cooling system up to 160 mm in height. The case supports M-ATX (Micro Advanced Technology eXtended, a motherboard format smaller than the standard ATX) and ITX (Information Technology eXtended, an ultra-compact motherboard format) motherboards, allowing you to choose the right configuration for both an office and gaming PC.Thoughtful interior and space for dataInside you'll find a specially designed mounting bracket that allows you to install two SSDs (Solid State Drive, solid state drive) and two traditional HDDs (Hard Disk Drive, hard drive). This arrangement gives you a lot of flexibility in scheduling your operating system, games and data storage. The entire interior has been designed with order in mind - cables can be routed aesthetically, which promotes both appearance and better cooling.Quick access to portsOn the top edge of the case is an intuitive panel of inputs and outputs, including an advanced USB 3.0 connector (Universal Serial Bus, a connector standard for powering and charging electronic devices, as well as for data transfer). It allows fast file transfer and convenient charging of mobile devices. The top location of the ports makes it convenient to use them no matter where the computer stands - on or under the desk.Includedmotherboard screws x12hard drive screws x4power supply screws x6iron columns x2manual ManufacturerDarkFlashModelM305Housing typeMini TowerSide panelTempered glassMotherboard standardM-ATX, ITXPSU standardM-ATX, bottom mountSlots for internal drives4 (2 x 2.5", 2 x 3.5")Expansion card slots4Max PSU length160 mmMax length of graphics card300 mmMax height of CPU cooler160 mmMax number of fans7Fan mounting optionsRear: 120 mm x1; Top: 120 mm x2; Front: 120 mm x2; Bottom: 120 mm x2Water cooling mounting options-Number of fans installedNo fans includedType of fansNo fans includedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x2, HD AudioMaterial0.45 mm SPCCColorBlackHeight387 mmWidth195 mmDepth325 mm

The Lian Li Vector V100 combines stylish yet simple design with high compatibility and a special cutout for more individuality. With this desktop case, you get the perfect chassis for your next gaming PC. White midi-tower with tempered glass on the side and front Supports motherboards up to ATX form factor and with back-connect design Optimal cooling with up to nine fans and radiator support up to 360 mm Space for graphics cards up to 415 mm and CPU coolers up to 180 mm in height Four 120 mm fans with RGB lighting included Cutout with removable cover for collectibles The Lian Li Vector V100: midi-tower with a stylish design and plenty of space for hardware Express your personality with the Vector V100. Thanks to tempered glass panels on the side and front, you have an unobstructed view into your tower’s interior, while the LED strips are just the beginning of impressive RGB lighting. Make your build something special Directly behind the front of the V100 case is a cutout. Whether for figures or other collectibles—you can display your interests. If you don't need the cutout, simply cover it with the removable panel. Extensive cooling options Four 120 mm ARGB fans are already pre-installed—three reverse fans on the side and one with standard orientation at the rear. Thanks to their reversed fan blades, the sideways-mounted fans provide efficient airflow—and look just like regular fans. Additional mounting points for more fans are located on the top and bottom. If you prefer water cooling, you can also install a radiator up to 360 mm on the top panel. The dust filter at the bottom is easy to remove, so you can clean it whenever needed. Easy installation of your gaming hardware The Vector V100 offers plenty of space for your components—even high-end hardware. Thanks to support for motherboards with back-connect design and tidy cable management, your build will really stand out.

NZXT korpus H9 Flow RGB (must (matt), Tempered Glass x 2)

ROG Strix Helios II ROG Strix Helios II EATX mid-tower gaming case with dual tempered glass side panels, GPU support for up to 450mm in length, aluminum frame and front panel, GPU braces and 420mm radiator support Premium design: The Helios II is made for showcase builds, with aluminum front panel featuring diamond-grille design and 3D-structured filter to support effective cooling Optimal thermal performance: Pre-installed four 140 x 28mm performance fans deliver ultimate airflow Ready for the DIY experience: PC building is made easy with support for EATX motherboards and graphics cards up to 450mm long, plus a graphics card slot clamp and a rear detachable PSU bracket Tidy PC building: Effortless cable management is enabled by a multifunction cover with graphics card holders, a PSU shroud, a cable cover and rear cable clips Advanced I/O panel: This section features two USB 20Gbps Type-C® ports, four USB-A 3.0 ports, an ARGB-lighting control button and a fan-speed PWM control button Comfortable case straps: Easily carry your prized build to LAN parties with ergonomic and stylish X-shaped woven straps

Compact Micro-ATX case in black, made of steel and plastic, for Micro-ATX or Mini-ITX motherboards, four-slot GPU up to 415 mm, compatible with 360 mm radiator.

Endorfy Signum 300 Air EY2A005

The ASUS TUF Gaming GT502 Plus mid-tower case is designed for gamers and PC enthusiasts who demand both style and functionality. It features a robust cooling system that supports multiple fan and radiator configurations, ensuring that your system remains cool under pressure. The panoramic tempered-glass panels offer a window into your gaming world, showcasing your components and ARGB lighting. With support for a variety of motherboard form factors and ample room for high-end graphics cards and CPU coolers, the GT502 Plus is a versatile foundation for any custom gaming build. Its innovative design includes a dual chamber layout for better airflow and cable management, along with comprehensive dust filtration to keep your system clean. Whether you're building a new PC or upgrading an existing one, the ASUS TUF Gaming GT502 Plus offers the features and flexibility you need to create a stunning, high-performance gaming setup.

With the Lian Li LANCOOL 217 INF, you get a PC case that cleverly combines aesthetics and airflow. Based on the LANCOOL 217, it offers you practical features such as tool-less fan installation, flexible PSU positioning, and a movable front I/O. The front features tempered glass with a mirror, infinity effect, and RGB lighting—integrated into the front are two 170 mm fans that direct fresh air straight into the system. There's plenty of space: anything from Mini-ITX to SSI-EEB motherboards, large GPUs, multiple drives, and ATX PSUs fit easily. Elegant glass front: Tempered glass with all-around RGB infinity effect High airflow: Two integrated 170 mm ARGB fans in the front glass Versatile compatibility: Supports motherboards from Mini-ITX up to SSI-EEB Room for large graphics cards: Seven PCIe slots, supports GPUs up to 380 mm in length Highly adaptable: Variable PSU installation & movable front I/O Stylish design: RGB lighting for a unique look Lian Li LANCOOL 217 INF: Strong airflow despite a glass front LANCOOL 217 INF glass front with infinity mirror The glass front combines showcase appeal with effective airflow. The mirror with infinity effect and RGB lighting runs along the edges, while two 170 mm ARGB fans are installed directly in the front. They deliver high airflow at pleasant noise levels—perfect for reliably keeping your components cool. Midi-Tower for today's hardware LANCOOL 217 INF side view The Lian Li LANCOOL 217 INF can accommodate motherboards from Mini-ITX up to SSI-EEB—including boards with back-connect. Thanks to 7 PCIe slots and 380 mm of clearance for GPUs, your powerful high-end graphics card will fit with ease. In addition, there are enough fan mounting spots, so you can expand cooling for your components as needed. Flexible cooling & I/O as you like The top can fit up to three 120 mm or two 140 mm fans, and the rear supports either a 120 mm or 140 mm fan. A 140 mm RGB fan comes pre-installed in the rear. The front I/O module with 2× USB-A, USB-C, and a 3.5 mm combo jack can be mounted either on the top or the side—ensuring easy access in any setup, no matter how you configure it. Easy-to-control, powerful RGB lighting LANCOOL 217 INF interior view Lighting control: Two RGB buttons directly on the case 15 lighting effects: Selectable with a button press Software control: Synchronizable via L-Connect 3 Wireless ready: Compatible with Lian Li Wireless Controller Quiet performance: 170 mm fans at a maximum of 34 dB(A) The Lian Li LANCOOL 217 INF offers powerful RGB highlights: a large infinity mirror on the front and pre-installed ARGB fans. Using two buttons next to the power button, you can control effects and colors directly—without the need for additional software. Optionally, you can synchronize everything via Lian Li Wireless and L-Connect 3—including fan curves for the ideal balance between noise and cooling. For RGB fans, airflow enthusiasts, and tinkerers alike: the LANCOOL 217 INF combines strong cooling, a flexible layout, and eye-catching design in a single case.

GEMBIRD computer case Fornax 2500 ATX - ARGB backlight black

The ASUS ProArt PA602 system cabinet combines aesthetics with functionality, making it a suitable choice for professional and enthusiast system builders alike. Its mid-tower form factor is compatible with a broad range of motherboards, from ATX to Mini-ITX, providing the flexibility needed for various build requirements. The chassis features an efficient cooling system, including two 200 mm fans at the front, one 140 mm fan at the rear, and additional fan mounts on the top, ensuring your components stay cool. The inclusion of integrated cable management and dust filters on the bottom, front, and top panels not only helps maintain a clean system but also enhances airflow. For those looking to showcase their build, the tempered-glass windowed side panel offers a clear view of the interior, while the vertical graphic card orientation option allows for a visually appealing setup. With its elegant design, practical features, and versatile expansion options, the ASUS ProArt PA602 is designed to meet the demands of today's creative professionals and enthusiasts.

PURE BASE 501 DX | MidiTower | PSU Not included | Fan at top 1x Pure Wings 3 140mm PWM White; Fan at front 1x Pure Wings 3 140mm PWM White; Fan at rear 1x Pure Wings 3 140mm PWM White | Dimensions 450 x 231 x 463

XG172 | MidiTower | PSU Not included | Cooling Fan Support (mm): Side:2x 120mm Top:3x120mm / 2x140mm Rear:1 x 120mm Bottom: up to 3 x 120mm | Dimensions 421 x 220 x 490mm

be quiet! Pure Base 600. Kujutegur: Miditorn, Tüüp: PC, Materjal: ABS-sünteetika, Teras. Toetatud elektritoite tarne vormi faktorid: ATX. Installitud esiventilaatorid: 1x 140 mm, Installitud tagaventilaatorid: 1x 120 mm

No. of drive bays: 4 Weight: 7.49

Deepcool korpus CC560 MESH V2 (must, Tempered Glass)

Compact dual-chamber midi tower, developed by Lian Li and PCMR, three sides with seamless tempered glass, alternative case lid for better cooling, supports 3x 360-mm radiators simultaneously, up to 11x 120-mm fans, 1x USB-C 3.1 and 2x USB-A 3.0 in the front panel

Midi tower case, with tempered glass side panel, excellent airflow thanks to fine mesh front, space for radiators up to 360 mm, 4x 140 mm fans pre-installed, support for motherboards with rear connections.

Midi-tower case, with tempered glass side panel, perforated top, four integrated PWM LED fans.

DeepCool CH160 PLUS. Formfaktor: Small Form Factor (SFF), Type: PC, Produktfarve: Sort. Placering af strømforsyning: Top, Understøttede strømforsyning formfaktorer: ATX, PS2, SFX, SFX-L. Understøttede diametre for frontventilatorer: 120,140 mm, Understøttede diametre for bagerste ventilatorer: 120 mm, Understøttede diametre for øverste ventilatorer: 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 195 mm, Dybde: 375 mm, Højde: 323,5 mm

Gamemax | Case | INFINITY MINI BK | M-ATX

Deepcool MATREXX 40 Black, Micro ATX, 4, USB 3.0 x 1; USB 2.0 × 1; Audio x 1, ABS+SPCC+Tempered Glass, 1 × 120mm DC fan

Antec korpus FLUX PRO Full Tower must Retail

The Phanteks NV9 MK2 is perfect for enthusiasts who want to showcase their hardware spectacularly while ensuring strong cooling performance. With its generous use of Tempered Glass and subtle DRGB lighting, you can impressively highlight your components, while the thoughtful ventilation system ensures optimal airflow. Ideal for you if you value aesthetics, functionality, and compatibility with back-connect motherboards. Elegant showcase case with excellent cooling performance Side and front panels made of Tempered Glass for a panoramic view of your hardware Optimal cooling with space for up to 11x 140mm or 12x 120mm fans Radiators possible on the top, bottom, side, and back Space for graphics cards up to 490mm in length Supports large motherboards up to E-ATX Back Connect: compatible with ASUS BTF and MSI Project Zero Space for large CPU tower coolers up to 205mm in height Integrated D-RGB lighting with built-in controller Phanteks NV9 MK2 Big Tower: Panoramic view now with Back Connect With the Phanteks NV9 MK2, you don’t compromise on cooling and presentation for your hardware. The left side panel and seamlessly integrated front are made of Tempered Glass and provide a superb panoramic view of your components. The pre-installed but subtle DRGB lighting enhances the look of the case and further highlights your hardware. Strong cooling performance for your components In developing the NV series and particularly the NV9 MK2, PHANTEKS focused on cooling the components from the start. The case is therefore designed to be very open and aimed at uninterrupted airflow. The top and part of the right side cover are made of mesh, ensuring good air throughput. The bottom is sloped and provides ample space with a maximum distance of 65mm to guide fresh air into the case. Many mounting options for better cooling The PHANTEKS NV9 MK2 offers numerous options for fan installation to optimally cool your hardware. You can accommodate a total of eleven 140mm or twelve 120mm fans, ensuring effective cooling throughout. Three fans can be mounted at the bottom on a removable frame above the dust filter. The side of the case offers space for four 120mm or three 140mm fans on another removable frame. Three fans can be installed on the top, and the back even has space for two additional fans. There is also sufficient space for extensive water cooling. On the top and bottom as well as on the side, one 420mm radiator can fit simultaneously. You can alternatively install a 360mm radiator at the bottom or the top. Additionally, a heat exchanger up to 480mm in length can fit on the side. You can also install a 240mm or 280mm radiator at the back if you want to use a smaller AiO water cooling for your GPU. Ample space for your gaming hardware If you use a large motherboard to get the most out of your system, then the NV9 MK2 is also the right choice for you. For maximum compatibility, you can easily accommodate E-ATX motherboards. Additionally, graphics cards up to 490mm in length and 205mm in width can be installed. There is sufficient space for modern, wider GPUs and 12VHPWR cables in this big tower case. For additional stability, a GPU holder is also included. The PHANTEKS NV9 MK2 also supports CPU coolers up to 205mm in height. The case also provides space for up to three 3.5-inch and two 2.5-inch drives or six 2.5-inch drives, giving you ample storage options for any data. These can be installed on a hinged frame behind the motherboard tray and directly on the back of the motherboard tray. Robust construction and well-equipped I/O panel In addition to the Tempered Glass panels, the case impresses with its construction from robust steel. The frame is well hidden by screen prints on the panels. The seamless glass panels not only provide an elegant look but also an unobstructed view of the installed components. The I/O panel features a power button, HD audio and microphone jack, as well as a USB 3.1 Type-C port and two USB 3.0 Type-A ports for fast data transfer. Additionally, there are four buttons integrated into the case for controlling the D-RGB lighting - one button for each mode, colour, speed, and channel. Each channel has two connectors where the LED strips can be attached. The modular I/O panel at the bottom front can also be mounted at the back of the case. Intelligent cable management The PHANTEKS NV9 MK2 features a sophisticated cable management system that ensures a tidy and neat appearance. Particularly notable is the back, which also has a mesh cover and offers cable channels behind it, allowing you to hide cables from the motherboard panel as well. Through a cutout with a rubber grommet, you can even route cables through the bottom of the case. This way, your NV9 MK2 has a neat and appealing look from every angle. The case also supports motherboards with Back Connect. With back-connect design motherboards like MSI's Project Zero or ASUS's BTF motherboards, the connections for power supply, data cables, and other connections are located at the back of the motherboard. This not only provides cleaner cable management in your case but also better ventilation.Specification:ColourPrimary Colour: BlackDimensionsLength / Depth: 575 mmWidth: 280 mmHeight: 615 mmCaseCase Type: Full TowerMotherboard SupportCompatible Motherboard Formats: ATX, E-ATX, Micro-ATX, Mini-ITXMax. Motherboard Format: E-ATXInternal DimensionsMax. CPU Cooler Height: 205 mmMax. GPU Length: 490 mmMax. PSU Length / Depth: 210 mmPower SupplyPSU Format: ATXPower Supply Position: rear topFan Support120 mm fan: 12140 mm fan: 11Drive Bay2.5 inch internal drive bay: 63.5 inch internal drive bay: 3External PortsUSB 3.1 (extreme) Type C: 1USB 3.0 (extreme) Type A: 2Audio output & input: 1x output/input comb. (3.5 mm jack, 4-pin, TRRS)Case FeaturesI/O Position: FrontSide Panel: with windowFilters included: YesBook ConnectBook Connect: YesBook-Connect Compatibility: ASUS BTF, MSI Project ZeroExpansion SlotsExpansion slots / PCI slots: 8MaterialMaterial: Plastic, Steel, Tempered GlassLightingLighting: YesRGB Type: ARGB / DRGBLighting Colour: RGBAdditional ContentsIncluded Fan: None

The Lian Li Vector V100 combines a stylish yet minimalist design with high compatibility and a special cutout for extra individuality. With this desktop case, you get the perfect frame for your next gaming PC. Black midi-tower with tempered glass on the side and front Supports motherboards up to ATX form factor and with back-connect design Optimal cooling with up to nine fans and radiator support up to 360 mm Room for graphics cards up to 415 mm and CPU coolers up to 180 mm in height Four 120 mm RGB fans included Cutout with removable cover for collectibles The Lian Li Vector V100: A midi-tower with stylish design and plenty of space for hardware With the Vector V100, you can express your personality. Thanks to tempered glass on the side and front, you have an unobstructed view inside your tower, while the LED strips are just the beginning of impressive RGB lighting. Make your build something special Directly behind the front of the V100 case is a cutout. Whether for figures or other collectibles – you can showcase your interests here. If you don't need the cutout, you can simply cover it with the removable lid. Extensive cooling options Four 120 mm ARGB fans are pre-installed in the case – three reverse fans on the side and one standard fan at the rear. Thanks to their reverse fan blades, the side-mounted fans provide efficient airflow – and look just like regular fans. Additional options for installing extra fans can be found on the top and bottom. If you prefer water cooling, you can also install a radiator up to 360 mm on the top. The dust filter at the bottom is easy to remove, so you can clean it whenever necessary. Easy installation of your gaming hardware The Vector V100 offers ample space for your components – even high-end hardware. Thanks to support for motherboards with back-connect design and tidy cable management, you’ll make your build a real eye-catcher.

PC case Mars MC-XO ATX FRGB fan black The MC-XO is an ATX semi-designed for those who seek the perfect balance between performance and aesthetics. With an optimized design for refrigeration, it incorporates a 120mm rear FRGB fan, a double-chamber system for efficient thermal management and the innovative Sidecool system, which maximizes the side air flow without compromising clean aesthetics and sophisticated from the box. Its modern and functional design makes it an ideal choice for game and professional setups.

FRACTAL DESIGN Define 7 Black TGD

Darkflash arvutikorpus DK100, mATX PC Case, Side Window, must

Gamemax | Case | CLAW 360 BK | M-ATX

Gamemax Case | NEX C51 BK | ATX/BTF

With the LANCOOL 217 from Lian Li, you bring style, functionality, and performance into perfect harmony. This mid-tower case combines a natural wood look with powerful cooling and offers everything you need for modern PC builds – including pre-installed fans, a flexible layout, and wide motherboard compatibility. Wood meets high-end: Black with walnut accents 5 pre-installed fans: High-performance cooling straight out of the box Back-Connect-ready: Compatible with motherboards featuring rear connectors Flexible power supply mounting: Standard and rotated modes for more space and better airflow Tool-less fan mount: Quick and easy installation thanks to retaining clips Lian Li Lancool 217 in black: A case that combines design and performance demands The LANCOOL 217 impresses with its successful combination of solid steel, tempered glass, and decorative real wood elements. The perforated mesh front not only ensures maximum airflow but also completes the organic design. With its spacious interior layout, the case supports motherboards up to SSI-EEB, GPUs up to 380 mm in length, and CPU coolers up to 180 mm in height. Excellent cooling for high-end hardware The five pre-installed fans provide powerful airflow straight from the factory. You can flexibly choose between a GPU- or CPU-focused cooling scenario by simply adjusting the fan positions. Magnetic dust filters and tool-free installation make assembly easier, keep your setup clean, and ensure you can clean your system quickly and easily. PC case with easy installation of your components Another highlight of the LANCOOL 217 is the removable radiator bracket: It makes installing AIO water cooling with up to 360 mm radiators easier and creates extra space when installing hardware. Two power buttons in different locations make it easier to turn your PC on, depending on whether it sits on or under your desk. Thanks to thoughtful solutions such as the vertically mountable PCIe slot, HDD/SSD combination options, and generous cable management, the LANCOOL 217 is the perfect choice for style-conscious PC enthusiasts with high expectations.

The Krux Helio is a compact microATX case featuring a modern design with dark wood accents on the front, inspired by the Palum model. Its appearance makes it a great fit for offices, living rooms, or gaming setups. Despite its small size, it offers space for up to eight 120mm fans (three at the front, two at the bottom, two at the top — 140mm also possible — and one at the rear), and it comes with a 120mm PWM fan pre-installed at the back. A tempered glass side panel provides a view of the interior, while rounded edges emphasize its modern look. Thoughtfully designed dust filters and an easily removable front panel simplify cleaning and fan installation. Inside, it accommodates graphics cards up to 320mm, power supplies up to 170mm, and CPU coolers up to 175mm. There are also mounts for two 3.5" and one 2.5" drives, as well as radiator support up to 280mm. The I/O ports are located on the lower side and include USB-C 2.0, USB-A 3.0, a 3.5mm combo audio jack, as well as power and reset buttons — especially convenient if the case is placed on a desk.

HYTE korpus Y70 (hellblau)

Asus korpus PRIME AP202 TG ARGB (must, Tempered Glass x 2)

Micro-ATX case, innovative front-mounted power supply, GPU support up to 430mm, space for up to seven 120mm fans, dedicated radiator chamber, glass panels on front and side, includes three 120mm reverse fansThe Phanteks XT V3 combines a compact design with generous room for modern hardware. With stylish glass panels and robust cooling, your gaming setup becomes a true showcase. Compact Micro-ATX case: ideal for modern builds Ample space: supports GPUs up to 430mm in length Optimized for cooling: up to seven 120mm fans or a 360mm radiator Compatible: supports back-connect motherboards Showcase design: tempered glass panels on the front and side The Phanteks XT V3: Compact Mini Case with Ample Space Phanteks XT V3 Case Thanks to its compact form factor, the Phanteks XT V3 can be easily integrated into a wide variety of gaming or professional setups—while still offering excellent support for modern hardware. The spacious interior accommodates Mini-ITX and Micro-ATX motherboards and supports back-connect designs. High-performance GPUs fit easily as the Phanteks XT V3 provides four PCIe slots and space for GPUs up to 430mm. The rear chamber impresses with an innovative design for premium hardware. Instead of the usual position, the PSU is relocated to the top front. This enables the Phanteks XT V3 to support full-sized ATX power supplies, ensuring greater compatibility. Powerful Cooling Phanteks XT V3 The Phanteks XT V3 delivers outstanding cooling performance. Seven mounting points for 120mm fans—three at the top, three at the bottom, and one at the rear—enable efficient airflow layouts. Out of the box, three powerful M25-120 reverse DRGB fans at the base provide excellent cooling. Additionally, the Phanteks XT V3 features a dedicated top chamber for a 360mm radiator. This makes it easy to install a high-performance AIO cooler, keeping even high-end CPUs reliably cool during the most intense gaming sessions. Showcase Case Phanteks XT V3 With the Phanteks XT V3, you can perfectly display both your hardware and your building skills. The rear chamber offers ample space for cable management along with smart routing options for a tidy system. Completing the look are tempered glass panels on the front and side, providing an unobstructed view of your components from any angle. Comprehensive I/O Panel Phanteks XT V3 The Phanteks XT V3 provides excellent support for your gaming setup thanks to its front I/O panel on the bottom right. It features both a USB Type-A and Type-C port with USB 3.2 Gen 2x2 standard. Additionally, a 3.5mm combo audio jack is available for your gaming headset.

Design Art in its best by RAIJINTEK – New SFF chassis of OPHION series. The OPHION series case is designed to fulfil a smallest case built with max. Possibility high-end, gaming and standard components, such as Intel i9/i7, AMD ...

Midi-Tower PC case in ATX form factor, made of steel and plastic, foldable side panel with magnetic closure, front made of fine mesh, GPU support up to 330 mm, suitable for 360 mm radiator

Product kirjeldus: ZALMAN Z-MACHINE 500 - MDT - extended ATX Product Type: System cabinet Form Factor: Mid Torn I/O Ühendusi: 2 x USB 2.0 2 x USB 3.0 1 x USB-C 3.1 1 x microphone 1 x kõrvaklapid Supported Motherboards: ATX, microATX, Mini-ITX, Extended ATX System Cabinet Features: kaabel management system, tempered glass side panel, airflow channels, tempered glass front panel, tempered glass top panel, toetab 120/240/280 mm radiator in top, toetab 120/240/360 mm radiators in front, Razer Chroma RGB, ARGB controller Power Device: No toiteplokk mõõtmed (WxDxH): 28 cm x 63 cm x 60.2 cm kaal: 10.5 kg

Spacious Midi-Tower with good airflow from Montech, supports motherboards up to ATX, radiators up to 360 mm, front and side panels made of tempered glass, three 120 mm PWM-ARGB fans pre-installed

Mini tower in black, supports up to 7 fans, room for a radiator up to 240mm, motherboards up to mATX, GPU length up to 410mm, and CPU cooler height up to 171mm, accommodates up to two drives, with a display at the bottom of the front panel The Jonsbo D200 mini case offers you maximum performance in minimal space. Thanks to its compact design, it fits easily on any desk or in your living room without compromising hardware compatibility. Perfect for anyone looking for a powerful gaming PC in a space-saving format. Black mini tower with panoramic design Effective cooling performance with support for seven fans and radiator up to 240mm Supports motherboards up to mATX Space for graphics cards up to 410mm and CPU coolers up to 171mm in height Small front display to show CPU system data Jonsbo D200: Compact mini tower with tempered glass sides and front The Jonsbo D200 is a mini tower that, despite its small size, offers enough space for powerful hardware. Whether high-end graphics cards or an AiO water cooling system—the possibilities are extensive. Extensive cooling options with fans and radiators To keep your hardware cool under any load, the Jonsbo D200 can accommodate up to seven fans simultaneously. The top supports three 120mm or two 140mm fans. Three 120mm fans can be installed on the power supply cover, while one additional 120mm fan can be fitted at the rear. An AiO water cooling system can also be installed if you prefer water cooling for your powerful hardware. There is space at the top for a radiator up to 240mm. Hardware installation The case offers plenty of space for powerful gaming hardware. It supports the installation of large graphics cards up to 410mm, allowing even the latest high-end GPUs from the RTX 5000 series to be installed. Motherboards up to mATX format are supported. The CPU cooler should not exceed a height of 171mm. For storage, up to two drives can be installed. CPU display on the front The built-in display in the Jonsbo D200 always shows you the current temperature of your CPU—for maximum control.

Internal 1x 3.5 "(transverse, drive rails), 1x 2.5" /3.5 ", 2x 2.5", Front I / O 2x USB-A 3.0, 1x USB-A 2.0, 1x microphone, 1x headphones, PCI slots 7, Fan (front) 2x 160mm (optional) or 3x 120mm (optional), Fan (rear) 1x 120mm (RGB illuminated), Fan (top) 2x 120mm (optional), Fan (other) 2x 120mm (optional), Radiator sizes 120/240 / 360mm front, 120mm rear, Mainboard to ATX, Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6") / ATX (12 "x9.6"), Power supply ATX (max.192mm deep), PSU position below, CPU cooler max. 157mm height, Graphics cards max. 317mm, Color black, inside black, Lighting illuminated fan, Dimensions (WxHxD) 206x457x380mm, Volume 35.77l, Enclosure type miditower, Special features Cable management, dust filter, window made of glass, w/o psu, AEROPGS-HIVE-G-BK-V3

Inter-Tech korpus B-02 RGB must ATX | 88881330