Midi Tower Fornax 4000 ARGB case white Professional gaming computer case Easy access - half glass side panel with window Specially designed front panel - "Magic" dust filter. Additional SSD toolless screws with rubber washer Bottom mounting of the power supply
Tootekood: AIR 903 MAX WGTIN: 4710562748970Korpused
Midi-Tower-Gehäuse, mit Seitenteil aus Tempered Glass, perforierter Deckel und besonders luftdurchlässige Front, vier integrierte 140-mm-PWM-ARGB-Lüfter
CTE C750 TG ARGB Snow Full Tower case The CTE C750 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, motherboard side and rear of the case. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for centralized thermal efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE C750 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE C750 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. We provide cooling performance beyond your imagination! The CTE C750 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support up to 420mm AIO radiators on the front, rear and motherboard side. Its dual-chamber design allows users to showcase key components and provides plenty of space for excellent cooling solutions, with the ability to accommodate up to 14 fans inside the case thanks to front, bottom and rear fan brackets and a top and side M/B vent. It also has lots of little details like swivel PCI-E slots, removable filters, a pump and tank bracket, and Velcro straps for easy cable management. Whether you're looking for a case for custom liquid cooling or a dual AIO setup, the CTE C750 TG ARGB Snow is a high-end presentation case that allows you to imagine something outside the box. Maximum radiator support - up to 360mm/420mm radiators in multiple locations Our CTE C750 TG ARGB Snow offers excellent cooling support for custom liquid cooling enthusiasts, there are various support locations and enough space to arrange your own configurations. Up to 5 radiators (three 360mm and two 240mm) can be mounted simultaneously on our CTE C750, providing incredible radiator support. To ensure AIO compatibility, radiators up to 420 mm/360 mm in diameter can be installed on the front, rear and motherboard side, giving PC enthusiasts unlimited possibilities for the perfect configuration. All your dream cooling components will fit! The CTE C750 Full Tower case has a huge fan and cooler installation capacity: up to fourteen 140 mm fans and 360 mm/420 mm AIO coolers in various locations. Moreover, equipped fan brackets at the front, bottom and rear ensure easy installation of all desired cooling components. Amaze your world with three pre-installed 140 mm CT140 ARGB fans The CTE C750 TG ARGB Snow Full Tower case is equipped with three 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance.
Volcano Expanse T Apex ARGB Midi Black case Excellent airflow. Roomy design. 4 ARGB fans included. Convenience of installation and expansion. Gaming source Here it is - the source of gaming - the Volcano Expanse Apex ARGB Midi computer case. Because what would a real gaming computer be without a housing in which all the components can be mounted with the utmost convenience and precision? Moreover, without any of the frills found in new housings, you will find a classic in a modern version. There are plenty of practical solutions for powerful gaming computers - an easily removable front filter and one under the power supply, it is possible to install a frame for three additional fans instead of a cable organizer, plenty of space for gaming components and great air circulation. When looking for the best solutions, it is good to go back to the source. Interior design The Volcano Expanse Apex ARGB MIDI case allows you to arrange the interior in such a way that the computer is truly yours! At the height of the motherboard, there is a dedicated space for mounting a cable tray or fan frame. It's up to you to decide how to use the possibilities of arranging the interior of your computer. The tray allows you to organize the cables and keep the inside of the case tidy. This will be appreciated by people who focus primarily on aesthetics and need to keep their computer in good order. And if you are building a real gaming monster and need the best possible cooling of your components, instead of the tray you can install a frame for three additional 120 mm fans. Turn your computer into a refrigerator By unscrewing the metal element designed to organize cables, you can install a dedicated frame for fans and cool the computer even better. In the triangle of dreams The Volcano Expanse T APEX ARGB MIDI case is designed with triangle-shaped panels. Hence the letter T in the name of the housing, which comes from the word triangle. How does it differ from its twin design, Volcano Expanse S ARGB Midi? In this version, due to the different design of the panels, dust filters have been added on the side and top of the housing. And since there is no accounting for taste, the choice is yours. Whichever version you choose, it will be a great decision. Easy! Keeping your computer clean is very important. To minimize dust entering the interior, an easily removable dust filter is located at the front between the front panel and the housing. All you need to do is simply remove the front panel (you don't have to dismantle the entire front) and dismantle the filter to clean it quickly and conveniently. The use of practical solutions will be appreciated by anyone who systematically cares about the cleanliness, durability and functionality of their computer. Cleaning the front panel is easy! Lots of fans Keeping components running cool is paramount. Thanks to this, they work more efficiently and their service life increases. Factory-installed ARGB fans (3 x 140 mm at the front and 1 x 140 mm at the back) ensure good air flow, effectively cooling the graphics card and processor. However, if you want to have even greater configuration options, you can install three additional 120 mm or 2 x 140 mm fans on the top panel. Moreover, there is space on the motherboard mounting wall for three 120 mm fans after installing a special frame instead of the cable tray. In total, you can have up to 10 fans here! Water cooling The housing is suitable for water cooling installation. At the top of the case there is space for a radiator up to 360 mm. The same size cooler will also fit in place of the factory-installed fans on the front of the case. The same cooler (360 mm) can also be mounted on a dedicated frame of the motherboard wall, but its thickness cannot be greater than 52 mm. At the back, there is space for 120/140 mm water cooling. The introduced solutions are intended to create a real gaming machine for every game. And all this in a solid, airy construction. Without screws The times when you had to unscrew panels are long gone. In the Volcano Expanse case, we offer pleasant and simple solutions so that you can build your dream computer with a smile. All panels are mounted with snaps - you don't need any tools to remove the panel and conveniently install the components. Need to add RAM sticks? Blow out the dust from the interior? You can remove the panels with a smooth movement of your hand without having to unscrew them. Controller The case is equipped with an ARGB fan controller. Thanks to this, you can manage their speed and backlight. A total of 9 fans can be connected. At your fingertips The panel with USB/Audio inputs is placed at the top of the case, giving you convenient access to the connectors when the case is placed under the desk. There are 2 USB 3.0 connectors and one USB-C connector on the panel. Classically, there is also a microphone and headphone input, as well as a power button and fan control. Dust filter There is a dust filter under the power supply. You can easily remove and install the filter, which will keep your computer clean while increasing the efficiency and safety of the power supply and other installed components. It was designed for ease of assembly and disassembly, which is facilitated by structural elements equipped with magnets. Access to the filter is possible both from the front and back of the housing. Dust filters are also installed on the top and side panels. A place for your favorite games There will be plenty of space for your favorite games. The housing allows the installation of two 2.5 drives on the motherboard tray. Additionally, you can install two 3.5 mm in the power supply tunnel. With this amount of disk space, you can easily plan to install new games. Removable caps and vertical GPU mounting All PCI/PCIe expansion card caps are removable. Players will also appreciate the possibility of vertically mounting the graphics card, because the metal frame in which the caps are placed can be unscrewed.
Mini-ITX and M-ATX case in black, for motherboards in Mini-ITX or M-ATX format, eight different installation options, external IO hub, mesh grille for improved air intake, up to seven 120mm fans, and two simultaneous 360mm radiators.
Compact gaming case, made of high-quality steel, for SFX PSUs and Mini-ITX/Micro-ATX motherboards (Intel and AMD), GPU up to 363 mm and 2x 2.5-inch drives
Compact gaming case, made of high-quality steel, for SFX PSUs and Mini-ITX/Micro-ATX motherboards (Intel and AMD), GPU up to 363 mm and 2x 2.5-inch drives.
Mini-ITX case as well as M-ATX case in white, for motherboards in Mini-ITX or M-ATX format, eight different installation possibilities, external IO hub, mesh grille for improved airflow, up to seven 120 mm fans, and two simultaneous 360 mm radiators.
The Jonsbo TK-0 Mini-ITX case combines elegant design with impressive functionality. High-quality materials such as aluminum, steel, and a refined walnut wood application give this compact case a unique look. Despite its handy size, it offers enough space for powerful hardware and flexible cooling options – perfect for space-saving setups, gaming sessions, or a stylish workspace. Compact Mini-ITX case made of aluminum, wood, and steel Walnut wood application ensures a unique look Ideal for space-saving setups due to its small size Accommodates up to two 140 mm and two 90 mm fans Space for 1x 3.5-inch HDD and 1x 2.5-inch SSD, SFX power supplies up to 160 mm For graphics cards up to 230 mm in length
The IcyDock MB982SP-1S is a 2.5" to 3.5" SAS/SATA converter with improved properties. This product was developed with the same dimensions, connector positions, and mounting holes as a conventional 3.5" HDD, so it can be used in any internal drive bay, as well as in any backplane or hot-swap device designed for 3.5" drives.TypeMounting frameColorsilverEAN4711132868746Manufacturer No.MB982SP-1SIntended useInstallation in a 3.5" drive bay in a PC caseUseDrive frameSuitable for2.5" SATA I / II / III HDD/SSD (7 - 15mm)MaterialMetal (SECC)Installable drives1x 2.5 inch internalRequired drive bays1x 3.5 inch internalFurther informationData transfer: 6 Gbit/sDimensionsWidth: 102 mm x Height: 25 mm x Depth/Length: 147 mmWeight327 grams
• USB 3.2 Gen 1x1 - USB-A • For two 8,89cm/3,5" SATA hard disk drives • RAID feature (0 / 1 / Large / Normal) • UASP support (Win 8 or higher) • Aluminium body • Fan controller • Chipset for SATA 5 Gb/s (SATA I/II/III) - • Plug‘n‘Play • Nominal data transfer rate: up to 5 Gb/s
White midi tower, extravagant design with panoramic window, for motherboards up to ATX format, exceptionally good airflow, two different motherboard positions, 2x USB-A ports on the I/O panel.
Das Heritage verbindet Mode mit Funktionalität und bietet Ökoleder für einen hochwertigen und unverwechselbaren Look, der Ihr System hervorstechen lässt. Der mitgelieferte Ledergurt ist sowohl robust als auch praktisch und ermöglicht Ihnen das mühelose Tragen und Bewegen Ihres Setups, egal ob Sie es aufrüsten, verreisen oder Ihr System präsentieren. Müheloser Transport mit einem strapazierfähigen Ledergurt, der bis zu 40 kg trägt – perfekt für Gamer, Entwickler und Enthusiasten, die viel unterwegs sind. Überwindet Grenzen, indem ein ATX-Netzteil, eine GPU der 40er-Serie und ein 360-mm-AIO gleichzeitig untergebracht werden – unübertroffene Vielseitigkeit auf kleinerem Raum. Werten Sie Ihr Gehäuse mit einem harmonischen Design auf – Öko-Leder-Finish, kultige Dreiecksmuster und passende Netzausschnitte für eine schlanke, elegante Ästhetik. Der magnetische, schnell zu lösende Staubfilter an der Unterseite macht das Entfernen und Reinigen schneller und einfacher als je zuvor.
The chassis stand for the Tower 300 Matcha Plum includes a base cover and a display stand. It allows users to position their Tower 300 Matcha Plum horizontally, making it easy to customize the case and create a unique experience. A dust filter is attached to the base plate to provide protection against dust. The chassis stand comes with rubber pads to prevent scratching the chassis during installation. The abrasion-resistant material ensures lasting protection without affecting the surface of the tower. The small elevations of the anti-slip design are strategically placed to provide a secure hold and prevent unwanted movement during use.
