Korpused

Inter-Tech korpus X2 Duplex Pro (must)

LC-Power 809B Dark Storm

Compact midi-tower, excellent airflow, 45 liters volume, plenty of space for hardware, integrated riser cable

Thermaltake korpus CTE E660 MX (valge, Tempered Glass x 2)

Versatile midi-tower, front and side panel made of tempered glass, large mesh areas on the left side panel and top, 2x 140mm & 1x 120mm ARGB PWM fans pre-installed, GPU length of up to 420mm, CPU cooler height up to 175mm

Darkflash C218M computer case (black)

Darflash FT350 computer case + 5 aRGB fans (white)

XPG INVADER X. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Placering af strømforsyning: Bund. Understøttede diametre for sideventilatorer: 120 mm, Understøttede diametre for bagerste ventilatorer: 120,140 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 245 mm, Dybde: 475 mm, Højde: 448 mm

SilverStone korpus ALTA D1 (must)

HYTE korpus Y70 Touch Infinite (must, Tempered Glass x 2)

Small midi tower with tempered glass on the side, up to eight fans, space for a radiator up to 280mm, motherboards up to Micro-ATX, GPU up to 330mm and CPU cooler up to 161mm in height, up to four drives possible, two 120mm fans includedSmall case with tempered glass side panel Efficient cooling options with up to eight fans and radiators up to 280mm Support for motherboards up to Micro-ATX Space for graphics cards up to 330mm and CPU coolers with a height of up to 161mm Up to four drives possible Two 120mm fans included The Montech AIR 100 LITE: Minimalist case with high cooling performance The Montech AIR 100 LITE is the smaller variant of the Montech AIR 100 and impresses with its lightweight and minimalist design. Nevertheless, this midi tower offers extensive options for installing your hardware - particularly a variety of fans to keep your system cool. Well-cooled with fans and radiators Despite its small size, up to eight fans can be installed in the tower. The front supports a maximum of three 120mm or two 140mm fans. You can install two 120mm or 140mm fans at the top. A further 120mm fan can be installed at the rear, as well as up to two more 120mm fans above the power supply chamber. Two 120mm fans are already included at the front and rear. If you prefer water cooling - whether an all-in-one water cooler or a custom-built water cooling system - there are several locations where a radiator can be installed. The front supports a radiator up to a maximum of 280mm, the top supports a 240mm radiator, and another 120mm radiator can be installed at the rear. Hardware options The midi tower supports the installation of graphics cards up to 330mm in size. Motherboards up to Micro-ATX format are feasible. The CPU cooler should not exceed a height of 161mm. To store programs and games, up to four drives can be installed.

Inter-Tech korpus IPC 3U-3508 (must, 3 Höheneinheiten)

Black case with 270° tempered glass side panel Optimal cooling options with up to nine fans and radiators up to 420 mm Spacious interior for versatile high-end motherboards up to E-ATX Room for graphics cards up to 460 mm and CPUs up to 170 mm in height Installation of up to nine SSDs enables extensive storage options Supports motherboards with back-connect (ATX, mATX) Modular design simplifies assembly The TRYX LUCA L70: Midi-Tower for gaming PCs with maximum power The TRYX LUCA L70 is a large midi-tower that convinces not only with its wide range of hardware possibilities, but also with its timeless design that fits into any setup. The tempered glass on the front and side puts your high-end build in the spotlight—ready to receive true admiration. With the LUCA L70, you’re perfectly equipped to assemble your gaming PC exactly as you wish. This midi-tower offers more than enough space to keep your hardware cool, and is also extremely easy to take apart and put back together. Building your high-end setup has never been so easy! Comprehensive cooling options for your new build When building your own PC, cooling is one of the most important factors to consider. The LUCA L70 allows the installation of up to nine fans: two 120 mm or 140 mm fans on the top, three 120 mm or 140 mm fans on the side, three 120 mm or 140 mm fans on the bottom, and one 120 mm fan at the rear. Note that with this combination, the power supply unit must be mounted on the top of the case. If you prefer mounting the PSU on the bottom, three fans can be installed on the top and only one on the bottom. Water cooling enthusiasts will also not be disappointed: radiators up to 420 mm can be installed in several locations. If the power supply is on the top, only a 240 mm radiator is possible there and a maximum 360 mm radiator on the bottom. If you mount the PSU at the bottom, there is room for a 420 mm radiator on the top as well as on the side. To prevent unnecessary dust buildup inside the case, there are dust filters on the top and bottom. This ensures a much longer lifespan for your hardware and saves you time and annoying cleaning. Thanks to the many options for installing fans and radiators, effective cooling is ensured so your high-end hardware always performs at its peak. In addition, the tower stands 4 mm above the ground on X-shaped legs, which further improves airflow. Case for powerful hardware So you can play even the most demanding games smoothly at high settings, the LUCA L70 accommodates a high-performance graphics card up to 460 mm in length. An included GPU bracket ensures it’s not subject to gravity. Vertical GPU installation is also possible—appropriate accessories must be purchased separately. The midi-tower is compatible with motherboards up to E-ATX with a width of up to 280 mm. To avoid cable clutter, it also supports motherboards with back-facing connectors when the PSU is on top, but only in ATX or micro-ATX format. The CPU height must not exceed 170 mm, and the power supply should be no longer than 190 mm. For plenty of storage for your programs and games, you can attach up to nine 2.5-inch drives to the side of the LUCA L70. Tool-free assembly and disassembly To make installing and swapping hardware as easy as possible, the LUCA L70 is fully modular. The front, side, and other parts can be taken apart and reassembled without any additional tools, plus the motherboard tray can be moved so you can install the motherboard, CPU, and CPU cooler independently.

Icy Dock Mb833m2k-b Ssd ümbris, M.2, must

Geh Antec Performance 1 M Aventurine Mini Tower schwarz retail

Mälupulk Delock

Gembird korpus PC Case Midi Tower Fornax 4300 ATX valge

eblaztr korpus eBlaztr PC-Case (must (matt))

Darkflash DB460M computer case (black)Darkflash DB460M is a reliable computer case designed for all gamers looking for a combination of functionality and aesthetics. It offers a spacious interior for convenient installation of graphics cards up to 420 mm in length, a tempered glass side panel, a full mesh front panel and excellent cooling options (up to 12 fans and a 360 mm radiator can be installed). The chassis looks sleek, and is compatible with M-ATX and ITX motherboards and equipped with USB 3.0 ports for fast data transfer.Minimalist designThe DB460M chassis features a tempered glass clamshell side panel - which opens without tools, greatly speeding up access to components and simplifying computer upgrades. The mesh front panel emphasizes the gaming character of the case, and what's more, it provides maximum airflow, supporting efficient cooling even during intensive work. As a result, you are assured that the inside of your PC is further protected.Designed with expansion in mindThe interior of the DB460M has been laid out to allow convenient installation and replacement of components when the need arises. The case supports M-ATX and ITX format motherboards, and its spacious design allows for graphics cards up to 420 mm in length and CPU coolers up to 174 mm in height. There are also 4 standard PCle slots at your disposal, optimized for 5 slots,which ensure compatibility with high-performance GPUs.Exceptional cooling performanceThe Darkflash DB460M allows you to install up to 12 120mm fans or 4 140mm fans, which translates into excellent heat dissipation from inside your PC. The case also supports the installation of water cooling - it is possible to mount a heatsink up to 360 mm in length, making it an ideal choice for systems requiring high thermal performance.Connectors and full functionalityOn the front of the case you will find USB 3.0 ports and two USB 2.0 connectors for fast data transfer and convenient connection of peripheral devices. As a result, the DB460M will prove itself both as a base for a gaming kit and a high-performance workstation.High build quality and aestheticsDarkflash DB460M is a combination of exceptional design, careful workmanship and high-quality materials. The case's clean lines, thoughtful cable layout and modernistic design make it a practical as well as stylish centerpiece of any computer workstation. The components of your equipment have never looked so good before! ManufacturerDarkflashModelDB460MHousing typeBig TowerSide panelTempered glassMotherboard standardM-ATX, ITXPower supply standardATX at the bottomSlots for internal drives3.5'HDD x2, 2.5'SSD x2Expansion card slots4Max PSU length240 mmMax length of graphics card420 mmMax height of CPU cooler174 mmMax number of fans12Fan mounting optionsRear: 120 mm x1; Top: 120 mm x3/140 mm x2; Bottom: 120 mm x3; Front: 120 mm x3/140 mm x2Water cooling mounting optionsTop 360/280/240 mm; Rear 120 mmNumber of fans installedNo fans installedType of fansNo fans installedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x2, HD AUDIOMaterial0.5 mm SPCCColorBlackHeight410 mmWidth220 mmDepth470 mm

With the D32 series, Jonsbo targets everyone who wants to build their PC in a space-saving way. Compared to the D32 PRO, the D32 STD PC case addresses the midrange and budget segment with key features such as back-connect support and minimal front I/O.Elegant and space-saving design for mATX motherboardsSeamless cable management with cutouts for back-connect motherboardsTempered glass side panel provides a subtle appearanceAmple space for cooling solutions allows the installation of high-performance hardwareDust filter protects your hardware from annoying dust particlesThe Jonsbo D32 STD White: Space-saving and subtle case for a wide range of hardwareWhether a midrange HTPC or a high-end PC, builds of all kinds comfortably fit into the D32 STD White from Jonsbo. This minimalistic case accommodates graphics cards up to 365 mm long and CPU coolers up to 164 mm high.Thus, even with the compact design of the case, adequate cooling of your hardware is ensured. In combination with up to six 120 mm fans, or one 120 mm fan and four 140 mm fans, the fans also provide enormous airflow inside the case.No cable clutter with back-connectWith back-connect motherboards such as ASUS's BTF series, MSI's PROJECT ZERO series, or GIGABYTE's Stealth series, the case is virtually free of visible cable clutter despite having the same footprint.Because most power and connection cables can be connected at the rear of the motherboard, you save time on cable management while still enjoying a clean look inside your case. Combined with the tempered glass side window, the view of your hardware is especially appealing.Powerful cooling in a small spaceTo ensure your high-performance hardware is sufficiently cooled even in the compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for sufficient airflow, a large dual-tower CPU cooler, or even an installable 240 mm AIO, your hardware will always remain cool, even under load.The dust filter on the bottom and mesh side panel design ensure your hardware stays free of dust and dirt. This keeps your temperatures optimal at all times and helps increase the lifespan of your hardware.

Asus ProArt PA401 ATX Korpus klaasist USB 3.2 musta

Wall-mountable showcase case, ATX form factor, designed for custom water cooling, vertical GPU mounting, up to 360 mm radiator, graphics cards up to 400 mm in length.

Phanteks Eclipse G370A keskmise suurusega torniga ATX-korpus

Darkflash DS900W computer case without fans (Black).The Darkflash DS900W case combines modernistic design with high functionality - the panoramic glass without A-pillar (A-Pillar) strikingly exposes the interior, and the well-thought-out design ensures stability and easy installation. It supports up to 10 fans and 360mm cooling to ensure efficient heat dissipation. Dust filters protect components, and the large internal space allows for mounting high-performance components. A USB Type-C (Universal Serial Bus, a connector standard used to power or charge electronic devices, as well as transfer data) connector on the front ensures fast and seamless connectivity, while the aesthetically pleasing finish and sturdy construction make it a great choice for those looking to assemble a high-performance and modern PC setup.Minimalist design with a panoramic viewThe Darkflash DS900W is for those looking for a sleek, futuristic design combined with functionality. The woodgrain accent front and double-sided tempered glass construction give the case a unique style and provide a 270° panoramic view of components without a disruptive A-pillar, making the entire interior composition aesthetically pleasing and transparent. With Darkflash, you'll build a stylish gaming space while providing your computer components with maximum protection.Stable design without compromisesThe case is based on a mechanical structure, which is shaped like a closing bracket, which translates into greater rigidity and resistance to deformation. The lack of a classic A-pillar does not negatively affect stability - on the contrary, the whole structure is characterized by high load-bearing capacity and strength, which will be especially appreciated by users building high-performance sets with heavy graphics cards.Powerful cooling without limitsThe DS900W is designed for maximum thermal efficiency. Up to 10 120mm fans can be installed inside, as well as CPU (Central Processing Unit, CPU) cooling up to 170mm high, effectively keeping temperatures down even during heavy use. Additional vents and a metal mesh back panel increase airflow and improve cooling performance by up to 15% while reducing noise levels (10% reduction). This allows you to enjoy pleasant, quiet operation, whether you are playing more demanding titles or using advanced graphics programs.Full protection against dustThe entire chassis has been protected from dust - it uses covers that effectively block particles, pollen and other debris from getting inside. This solution keeps the interior clean, which not only extends the life of components, but also makes them easier to maintain.Thoughtful space for expansionInside, there is no shortage of space for large components. In the DS900W you can mount a graphics card of up to 425 mm in length, as well as a heatsink of up to 360 mm on top and 240 mm on the side. The case supports motherboard formats ATX (Advanced Technology eXtended, standard motherboard and computer case size), M-ATX (Micro Advanced Technology eXtended, motherboard and computer case size smaller than ATX) and ITX (Information Technology eXtended, compact motherboard and computer case format). In addition, 7 PCI (Peripheral Component Interconnect, a connector standard for expansion cards, such as graphics or sound cards) slots provide ample opportunity to expand the kit with more expansion cards. Darkflash thinks of the most demanding gamers who expect reliability from their hardware.Easy access to the Type-C portOn the front of the case is a USB Type-C port, which offers fast data transfer (up to 10 Gbps) and convenient access for various electronic devices. This solution makes the case ready for current hardware standards, being always at your fingertips.Functional details and solid finishThe Darkflash DS900W is equipped with anti-vibration trapezoidal feet, which increase the stability of the design and reduce vibrations. Inside you'll find room for two SSDs (Solid State Drive, solid state drive) and two HDDs (Hard Disk Drive, hard disk drive), and the clear interior layout easily accommodates the components you need, while maintaining order and good air circulation.Includedmotherboard screws x18power supply screws x6hard drive screws x9copper post x3 (6 pieces pre-installed)fan coverclamp x5fan screws x12copper spacerHD audio support x2USB cap x3user manual ManufacturerDarkflashModelDS900WHousing typeMidi TowerSide panelTempered glassMotherboard standardATX, ITX, M-ATXPower supply standardATX, bottom mountSlots for internal drives4 (2 x 2.5", 2 x 3.5")Expansion card slots7Max PSU length360 mm on top; 240 mm on the sideMax length of graphics card425 mmMax height of CPU cooler170 mmMax number of fans10Fan mounting optionsTop: 120 mm x3/140 mm x2; Side: 120 mm x3; Rear: 120 mm; Bottom: 120 mm x3Water cooling mounting options-Number of fans installedNo fans includedType of fansNo fans includedButtons and controlsPower, Reset, LEDConnectorsType-C x1, USB3.0 x1, USB2.0 x1, HD AudioMaterial0.5 mm SPCCColorBlackHeight454 mmWidth218 mmDepth434 mm

With the D32 series, Jonsbo targets everyone who wants to build their system in a space-saving manner. Unlike the D32 STD, the D32 PRO PC case is aimed at the high-end segment with special and practical features such as back-connect and improved front I/O. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for back-connect motherboards Mesh side panel for a subtle appearance Plenty of space for cooling solutions allows the installation of powerful hardware Three dust filters protect your hardware from annoying dust particles The Jonsbo D32 PRO Mesh: Compact and subtle case for high-end hardware Whether midrange HTPC or high-end PC – builds of all types fit comfortably in the D32 PRO Mesh by Jonsbo. The minimalistic case accommodates graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height. In back-connect mode, only the maximum CPU cooler height is reduced by about seven millimeters. Thus, despite the compact design of the case, adequate cooling for your hardware is ensured. Working with up to six 120 mm fans or one 120 mm and four 140 mm fans, airflow inside the case is enormous. No cable clutter with back-connect With back-connect motherboards, such as those from ASUS’s BTF series, MSI’s PROJECT ZERO series, or GIGABYTE’s Stealth series, the case in B-mode, with approximately six to seven millimeters more space, is nearly free from visible cable clutter. Since most power and connection cables can be plugged in at the back of the motherboard, you save on cable management while still maintaining a clean look inside your case. Powerful cooling in a small space To ensure your high-performance hardware is sufficiently cooled in such a compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans providing sufficient airflow, a large dual-tower CPU cooler, or even an installable 240 mm AiO, your hardware stays cool – even under load. Three dust filters at the front, top, and bottom make sure your hardware stays free from dust and dirt. This keeps your temperatures always at an optimal level and also extends the lifespan of your hardware.

With the D32 series, Jonsbo targets anyone looking to build a space-saving setup. The D32 PRO PC case, unlike the D32 STD, is aimed at the high-end segment with special and practical features such as Back-Connect or an improved front I/O.Elegant and space-saving design for mATX motherboardsSeamless cable management with cutouts for back-connect motherboardsMesh side panel creates a discreet appearanceAmple space for cooling solutions allows installation of powerful hardwareThree dust filters protect your hardware from annoying dust particlesThe Jonsbo D32 PRO Mesh: Space-saving and discreet case for high-end hardwareWhether mid-range HTPC or high-end PC – builds of all types can comfortably fit in the D32 PRO Mesh from Jonsbo. In this minimal case, graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height can be accommodated. In back-connect mode, the maximum height of the CPU cooler is reduced by just under seven millimeters.Thus, adequate cooling for your hardware is ensured even with the compact design of the case. Combined with up to six 120-mm fans, or one 120-mm fan and four 140-mm fans, the fans also provide tremendous airflow inside the case.No cable clutter with Back-ConnectWith back-connect motherboards such as the BTF series from ASUS, the PROJECT ZERO series from MSI, or the Stealth series from GIGABYTE, the case in B-mode, with about six to seven millimeters more space required, is virtually free of visible cable clutter.Since most power and connection cables can be attached to the back of the motherboard, you save on cable management and still maintain a clean look inside your case.Powerful cooling in a small spaceTo ensure your high-performance hardware stays properly cooled in the compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120-mm fans for sufficient airflow, a large dual-tower CPU cooler, or even a 240-mm AiO that can be installed, your hardware remains cool even under load.Three dust filters on the front, top, and bottom ensure your hardware stays free from dust and dirt. This way, your temperatures remain at an optimal level and the service life of your hardware is extended.

Azza Guardian Glass. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Placering af strømforsyning: Bund, Understøttede strømforsyning formfaktorer: ATX. Understøttede diametre for frontventilatorer: 120,140 mm, Understøttede diametre for sideventilatorer: 120 mm, Bagerste ventilatorer installeret: 1x 120 mm. Understøttede HDD-størrelser: 3.5", SSD-formfaktor: 2.5". Bredde: 220 mm, Dybde: 466 mm, Højde: 486 mm

DarkFlash DS900WD computer case (white)Darkflash DS900WD is an enclosure designed for users who want practical solutions. The tempered glass side panel and wooden front panel provide good visibility of components and give the whole case a distinct look. It allows the installation of motherboards in ATX, M-ATX and ITX formats, giving you great flexibility when building your computer. With its spacious design and multiple mounting options, it provides convenient kit assembly and good air circulation.Various cooling optionsThe DS900WD offers space to install 12 120 mm fans or 2 140 mm fans and water cooling at the top 360 mm or 240 mm, and at the front 240 mm. This allows you to build an effective cooling system for powerful configurations. In addition, the rear panel of the case features a large steel ventilation mesh for effective heat dissipation.Thoughtful layout and ample spaceThe chassis will accommodate a graphics card up to 425 mm in length and CPU cooling up to 170 mm in height. There are 7 PCI-E slots, allowing the kit to be expanded with additional expansion cards. For storage media, space is provided for two HDDs or one SSD and one HDD, so you won't run out of space for games and files.Built-in portsThe Darkflash DS900WD chassis is equipped with a set of the most commonly used ports that make everyday use of the computer easier. On the top panel you'll find one USB 3.0 (Universal Serial Bus 3.0, a high-speed data transfer connector), while 2 additional USB 2.0 ports are ideal for connecting a mouse, keyboard, headphones or other accessories. There is also an HD Audio connector for convenient connection of headphones and microphone.Refined detailsOn the right side of the case is a metal mesh, which not only provides adequate ventilation, but also blocks larger dust particles from entering the case. What's more, the top and bottom mesh panels also protect your equipment from debris, and their magnetic design makes them easy to install and remove.Durable construction and stylish designThe body of the case is made of 0.5 mm SPCC steel, which ensures high durability. The whole unit measures 470 x 218 x 454 mm and fits into standard under-desk spaces. The stylish design and the ability to illuminate the fans make the set look modern. ManufacturerDarkflashModelDS900WD ATXHousing typeMidi TowerSide panelTempered glassMotherboard standardATX / M-ATX / ITXPower supply standardBottom side, ATXSlots for internal drives3.5" HDD x2 / 2.5" SSD x2Expansion card slots7Max graphics card lengthHorizontal mounting: 425 mmMax CPU cooling height170 mmMax number of fans12Fan mounting optionsRear: 1x 120 mm; Top: 3x 120 mm / 2x 140 mm; Side: 2x 120 mm; Bottom: 3x 120 mm; Front: x3 120 mmWater cooling mounting optionsTop: 360 mm / 240 mm; Front: 240 mmNumber of fans installedNo fans installedType of fansnoneButtons and controlsPower, ResetConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorWhiteHeight454 mmWidth218 mmDepth470 mm

Das 4U-47045 ist ein vielseitiges 4U Servergehäuse mit vielen Erweiterungsmöglichkeiten und für den Einsatz in 19" Rack oder als Stand-Tower geeignet. Das Gehäuse ist standardmäßig für den Einbau von drei 5,25" Laufwerken, einem SLIM-DVD Laufwerk, vier 3,5" Laufwerken und zwei 2,5" Laufwerken konzipiert. Die Anzahl der Laufwerke lässt sich dabei durch den Einbau von optional erhältlichen Einbaukäfigen auf bis zu sechs 5,25" und zwei 2,5" Laufwerke oder acht 3,5" und zwei 2,5" Laufwerke erweitern. Für den nötigen Luftdurchsatz kann das Gehäuse hinten mit zwei 80mm Lüftern, im 3,5" Festplattenkäfig mit einem 80mm Lüfter und hinter der Fronttür mit einem 120mm Lüfter ausgestattet werden. Verstellbare Grafikkartenhalter sorgen für sicheren Halt der Grafikkarten oder anderer Erweiterungskarten. Die optional erhältlichen Teleskopschienen TS-680 ermöglichen den komfortablen Ein- und Ausbau in einem Serverschrank, sowie Arbeiten innerhalb des Gehäuses ohne dieses aus dem Schrank nehmen zu müssen. Des weiteren lässt sich das Gehäuse durch das ebenfalls optional erhältliche Erweiterungsset "SF-47045" auch als Stand-Gehäuse nutzen und mit Füßen und obenliegenden Transportgriffen versehen.

With its seamless glass surface, the ELITE SHARK CA500 from Sharkoon is the ultimate case for hardware enthusiasts! In addition to offering a 270-degree view of the interior, it delivers impressive cooling performance out of the box thanks to support for up to two radiators, a side air intake, and four pre-installed fans. Modern connectivity and compatibility with the latest BTF motherboards complete this ATX case. The specially crafted, continuous glass panel perfectly showcases your high-end hardware with an impressive 270-degree view at all times. Thanks to the side air intake and four pre-installed 120 mm ARGB fans, powerful cooling performance is ensured despite the large glass surface. A convenient ARGB controller and a five-slot PWM fan hub are also included! The ELITE SHARK CA500 provides space for up to two radiators simultaneously, making it especially attractive to water cooling enthusiasts with high demands. The case also supports modern BTF ATX motherboards, which feature hidden connectors for particularly tidy cable management and a clean look. Because high-end hardware requires ample space, the ELITE SHARK CA500 accommodates graphics cards up to 437 mm long, CPU coolers up to 176 mm high, and power supplies up to 265 mm long. For those who need to manage large amounts of data, the ELITE SHARK CA500 can house up to two 3.5-inch hard drives or up to six 2.5-inch SSDs.

As the latest mid-tower case in the Tower Series, the Tower 600 is an ATX case featuring a classic vertical chassis design and an octagonal prism shape, compatible with the latest motherboards with hidden connectors. It supports up to a 420 mm AIO radiator on the right side and a 360 mm AIO radiator on the left side, and offers space for up to thirteen 120 mm fans or nine 140 mm fans. If you want to make the Tower 600 visually more appealing, you can purchase the separately available 3.9" LCD screen kit and chassis stand kit to upgrade the case; the former displays real-time component information and the latter offers a unique look with a special horizontal placement. With its unique design and ample space, the Tower 600 is ready to unleash the full potential of your configuration. The Tower 600 features three 3 mm thick tempered glass panels on the front and two perforated panels on each side. All panels are easily removable without tools. The Tower 600 is equipped with well-designed filters on the top, rear, inner sides, and inner bottom layer to protect your system from dust. It supports a CPU cooler with a maximum height of 210 mm, a GPU with a maximum length of 400 mm (without PSU cover), a power supply up to 220 mm in length, and three 2.5" SSDs or a total of one 3.5" HDD.

Der AeroCool P500C Evo setzt mit seinem nahtlos gebogenen Glaspanel, dem Zweikammer-Design und der lebendigen ARGB-Beleuchtung ein ästhetisches Statement. Er bietet Panoramablick und optimiertes Kabelmanagement für ein schlankes, übersichtliches Gehäuse. Ausgestattet mit vier 12-cm-ARGB-Lüftern mit beidseitiger Beleuchtung und Unterstützung für 360-mm-Flüssigkeitskühlung sorgt er für außergewöhnlichen Luftstrom und Kühlleistung. Mit 450 mm GPU-Freiraum, einem modernen Typ-C-Anschluss und einem 10-Port-ARGB-Hub unterstützt der P500C Evo High-End-Komponenten und ermöglicht mühelose Anpassungen für Gamer und Kreative. Das Gehäuse unterstützt ASUS- und MSI-m-ATX-Motherboards mit nach hinten gerichteten Anschlüssen, um Ihre Kabel zu verbergen und Ihrem System ein elegantes Aussehen zu verleihen. Das P500C Evo unterstützt bis zu zehn Lüfter und ermöglicht so eine optimale Kühlleistung. Die Lüftungsschlitze im Seitenteil sorgen für eine effiziente Luftzirkulation. Die Lüfter an der Unterseite sorgen für eine gezielte Kühlung Ihrer GPU.

Das APNX V2 ist ein Premium-PC-Gehäuse, das für hervorragende Kühlung, elegante Ästhetik und Anpassungsfähigkeit entwickelt wurde. Seine drei abnehmbaren Hartglasplatten bieten einen rahmenlosen Panoramablick, während das X-Pand Flow Design die Gesamtluftströmungsdynamik erheblich verbessert. Mit Unterstützung für bis zu 10 Lüfter, 360-mm-Kühler und zwei 16-cm-Lüfter an der Unterseite sorgt es für eine erstklassige Wärmeleistung. V2 unterstützt gängige Mainboards mit Reverse-Anschluss für eine übersichtlichere Kabelverwaltung. Funktionen wie eine GPU-Halterung, eine abnehmbare Motherboard-Kabelabdeckung und ein austauschbares PSU/HDD-Fach verbessern die Haltbarkeit und Anpassungsmöglichkeiten. Mit vertikaler oder horizontaler 360-mm-AIO-Montage und Unterstützung für den APNX 10-Port-Lüfter-Hub bietet das APNX V2 effiziente Kühlung und mühelose Anpassungsmöglichkeiten für Hochleistungs-Builds.

Striking, spacious PC case with glass front and side panel, plus stunning backlighting. The Krux Empero is perfect for anyone who values futuristic design as well as plenty of space for components and long radiators. With the Krux Empero case, you get not only a classic glass side panel, but also a fully glassed front. The tempered glass panels (side, front, and corner) are easy to remove without tools. The set includes four illuminated Krux 120 mm ARGB PWM fans with PWM speed control, which help maintain optimal operating temperatures while providing the entire unit with eye-catching lighting effects. Additionally, easily removable dust filters keep the interior free from dirt and debris. The included splitter for up to 6 fans not only controls fan operation and backlighting but also makes cable management easier. The Krux Empero PC case offers plenty of space for components, including full-size ATX motherboards (or smaller microATX and mini-ITX), GPUs up to 420 mm in length, tower CPU coolers up to 155 mm in height, power supplies up to 205 mm long, five storage drives, and AiO coolers with lengths of 120, 240, 280, and even 360 mm. The standard set of four 120 mm fans can be expanded to a total of ten fans. The I/O panel of the Krux Empero features a range of practical and functional ports. It includes a 3.5 mm combo audio jack (for headphones, speakers, and microphones), buttons to control power and LED backlighting, two standard USB-A ports, and a third, modern USB-C port.

With the TRYX FLOVA F50, you can build your perfect gaming PC. This midi tower combines a calm, modern design with well-thought-out airflow. Whether it's a gaming PC, creator workstation, or powerful all-rounder, the FLOVA F50 gives you the right foundation. Quiet operation: Optimized cooling system ensures low noise levels Outstanding airflow: Special cross-flow fan concept for effective cooling Plenty of room for hardware: Graphics cards up to 420 mm long Radiator support: Space for AiO liquid coolers up to 360 mm Well-equipped I/O panel: USB-C 3.2 on the side TRYX FLOVA F50: Midi tower with stylish design TRYX FLOVA F50 Black front view The FLOVA F50 looks clean and understated. The front and side elements feature a fabric finish. This gives it a homely, minimalist look while also ensuring enough fresh air inside. That means the case fits not only in your gaming room, but also in your office or living room. Powerful airflow with clever air routing TRYX FLOVA F50 interior Inside, the TRYX Cross-Flow System (TCF) provides a strong supply of fresh air. The fans direct the air through the case at a 90-degree angle. This delivers fresh air directly to your graphics card and CPU. At the same time, your gaming system stays pleasantly quiet, at around 20 dB(A) at 1,100 rpm. So you get strong cooling without your PC being constantly audible during every task. Plenty of room for modern high-end hardware The FLOVA F50 can also accommodate large components. Graphics cards up to 420 mm long fit without problems. Air coolers can be up to 170 mm high. For liquid cooling, the FLOVA F50 supports radiators up to 360 mm. Ready for current motherboard generations Supports ATX motherboards Compatible with back-connect designs (BTF / Project Zero) Clean cable management Tool-free installation in many areas Especially with motherboards that have rear-side connectors, you benefit from a particularly tidy interior. Cables disappear from view and your build looks much cleaner. I/O panel with USB-C On the side, you'll find an I/O panel with USB-C 3.2. This lets you connect fast external devices without having to reach around to the back of your case. It is easy to access and fits the case's clean overall concept. Ideal for gaming, creative work, and quiet setups TRYX FLOVA F50 right side Whether you're planning a quiet creator PC or a powerful gaming machine, the TRYX FLOVA F50 gives you a case that reliably dissipates the heat from your components without becoming excessively loud. It is the perfect choice for you if you value quiet operation, strong airflow, and a subtle, high-quality design. It doesn't demand attention, but it impresses in the details.

The TR300 WS Mid-Tower Case is an ATX chassis with a front-mounted power supply for optimal space utilization, and supports AIO liquid coolers up to 360 mm for maximum cooling performance. It accommodates up to eight 120 mm fans and supports a radiator up to 360 mm on the top, offering flexible cooling solutions. The case supports Mini-ITX, Micro-ATX, and ATX motherboards; the power supply can be installed at four mounting points within the case, depending on the motherboard size. Maximize the visual effects of your TR300 WS Mid-Tower Case with an upgrade to our LCD screen kit. The 6-inch LCD display allows real-time monitoring and the upload of custom images or GIFs, adding extra flair with the latest TT RGB Plus software. Removable dust filters help keep your system clean while maintaining optimal airflow. For maximum storage compatibility, the case supports up to two 3.5-inch HDDs and three 2.5-inch SSDs for flexible installation.

The TR300 WS Mid-Tower Case is an ATX case with a front-mounted power supply for optimal space utilization, supporting AIO water cooling solutions up to 360 mm for maximum cooling performance. It accommodates up to eight 120 mm fans and supports a radiator up to 360 mm on the top, enabling flexible cooling solutions. The case supports Mini-ITX, Micro-ATX, and ATX motherboards; the power supply can be installed at four mounting points inside the case depending on the motherboard size. Maximize the visual impact of your TR300 WS Mid Tower Case by upgrading with our LCD Screen Kit. The 6-inch LCD display allows you to monitor real-time information and upload any images or GIFs for extra flair with the latest TT RGB Plus software. Removable dust filters help keep your system clean while providing optimal airflow. For maximum storage compatibility, the case supports up to two 3.5-inch HDDs and three 2.5-inch SSDs for flexible installation.

The TR300 TG Mid-Tower Case is an ATX case with a front-mounted power supply for optimal space utilization and supports AIO water cooling systems up to 360 mm for maximum cooling performance. It offers space for up to eight 120 mm fans and supports a radiator up to 360 mm on the top, enabling flexible cooling solutions. The case supports Mini-ITX, Micro-ATX, and ATX motherboards; the power supply can be installed at four mounting points inside the case depending on the motherboard size. Maximize the visual effects of your TR300 TG Mid Tower Case by upgrading with our LCD screen kit. The 6-inch LCD display enables real-time monitoring and uploading of any images or GIFs, adding extra flair with the latest TT RGB Plus software. Removable dust filters help keep your system clean while providing optimal airflow. For maximum storage compatibility, the case supports up to two 3.5-inch HDDs and three 2.5-inch SSDs for flexible installation.

The TR300 TG Mid-Tower Case is an ATX case with a front-mounted power supply for optimal space utilization, and supports AIO water cooling systems up to 360 mm for maximum cooling performance. It offers space for up to eight 120 mm fans and supports a radiator up to 360 mm on the top, allowing for flexible cooling solutions. The case supports Mini-ITX, Micro-ATX, and ATX motherboards; the power supply can be installed at four different mounting points inside the case depending on motherboard size. Maximize the visual effects of your TR300 TG Mid Tower Case with an upgrade using our LCD screen kit. The 6-inch LCD display allows monitoring in real time and uploading of any images or GIFs for extra flair with the latest TT RGB Plus software. Removable dust filters help keep your system clean while maintaining optimal airflow. For maximum storage compatibility, the case supports up to two 3.5-inch HDDs and three 2.5-inch SSDs for flexible installation options.

The Jonsbo X400 Pro is the premium variant of the X400 series and is aimed at enthusiasts who value excellent material quality. In contrast to the base version, the outer frame is made of real aluminum – for maximum stability, a premium feel, and a durable finish. Aluminum frame for an elegant appearance and high torsional rigidity 13 fan mounts – extreme cooling capacity for high-end builds Support for 360 mm radiators on the top and side Spacious interior for GPUs up to 427 mm and CPU coolers up to 176 mm USB-C (Gen 2), 2x USB-A, and audio/mic on the front I/O Case with a premium character The Pro version of the X400 uses an aluminum frame instead of plastic like the standard model. This not only ensures a more elegant appearance, but also greater robustness and better heat dissipation – ideal for demanding setups. Maximum air and water cooling Up to 13 fans can be installed in the case – three on the top, three on the side, two at the rear, two on the back side, and three on the bottom. In addition, two 360 mm radiators can be installed simultaneously – optimal for push/pull or dual-AiO systems. Compatible, spacious, and future-proof Whether classic or back-connect motherboards: the X400 Pro supports all common form factors and offers enough space for high-end graphics cards, power supplies up to 180 mm, and modern cooling concepts – all packaged in a high-quality aluminum chassis.