Micro-ATX case for DIY NAS, one pre-installed fan, GPUs up to 230 mm / CPU up to 70 mm height, 6x 3.5 / 2x 2.5 inch drives possible, 1x USB-C / 1x USB-A
Black case with 270° tempered glass side panel Optimal cooling options with up to nine fans and radiators up to 420 mm Spacious interior for versatile high-end motherboards up to E-ATX Room for graphics cards up to 460 mm and CPUs up to 170 mm in height Installation of up to nine SSDs enables extensive storage options Supports motherboards with back-connect (ATX, mATX) Modular design simplifies assembly The TRYX LUCA L70: Midi-Tower for gaming PCs with maximum power The TRYX LUCA L70 is a large midi-tower that convinces not only with its wide range of hardware possibilities, but also with its timeless design that fits into any setup. The tempered glass on the front and side puts your high-end build in the spotlight—ready to receive true admiration. With the LUCA L70, you’re perfectly equipped to assemble your gaming PC exactly as you wish. This midi-tower offers more than enough space to keep your hardware cool, and is also extremely easy to take apart and put back together. Building your high-end setup has never been so easy! Comprehensive cooling options for your new build When building your own PC, cooling is one of the most important factors to consider. The LUCA L70 allows the installation of up to nine fans: two 120 mm or 140 mm fans on the top, three 120 mm or 140 mm fans on the side, three 120 mm or 140 mm fans on the bottom, and one 120 mm fan at the rear. Note that with this combination, the power supply unit must be mounted on the top of the case. If you prefer mounting the PSU on the bottom, three fans can be installed on the top and only one on the bottom. Water cooling enthusiasts will also not be disappointed: radiators up to 420 mm can be installed in several locations. If the power supply is on the top, only a 240 mm radiator is possible there and a maximum 360 mm radiator on the bottom. If you mount the PSU at the bottom, there is room for a 420 mm radiator on the top as well as on the side. To prevent unnecessary dust buildup inside the case, there are dust filters on the top and bottom. This ensures a much longer lifespan for your hardware and saves you time and annoying cleaning. Thanks to the many options for installing fans and radiators, effective cooling is ensured so your high-end hardware always performs at its peak. In addition, the tower stands 4 mm above the ground on X-shaped legs, which further improves airflow. Case for powerful hardware So you can play even the most demanding games smoothly at high settings, the LUCA L70 accommodates a high-performance graphics card up to 460 mm in length. An included GPU bracket ensures it’s not subject to gravity. Vertical GPU installation is also possible—appropriate accessories must be purchased separately. The midi-tower is compatible with motherboards up to E-ATX with a width of up to 280 mm. To avoid cable clutter, it also supports motherboards with back-facing connectors when the PSU is on top, but only in ATX or micro-ATX format. The CPU height must not exceed 170 mm, and the power supply should be no longer than 190 mm. For plenty of storage for your programs and games, you can attach up to nine 2.5-inch drives to the side of the LUCA L70. Tool-free assembly and disassembly To make installing and swapping hardware as easy as possible, the LUCA L70 is fully modular. The front, side, and other parts can be taken apart and reassembled without any additional tools, plus the motherboard tray can be moved so you can install the motherboard, CPU, and CPU cooler independently.
The high-performance thermal pads of the Thermal Grizzly Minus Pad seriesfeature a very elastic and adaptable surface with extremely high thermal conductivity. Even the smallest component differences can be compensated for very well. Available in various sizes and thicknesses.The easy-to-use and flexible Minus Pads are made from different components: they are based on a ceramic-silicone compound and nano aluminum oxide. The pads consistently ensure optimal heat transfer. Only minimal pressure is needed for secure installation. All pads are environmentally friendly and RoHS compliant.The high-performance thermal pads of the Thermal Grizzly Minus Pad seriesfeature a very elastic and adaptable surface with extremely high thermal conductivity. Even the smallest component differences can be compensated for very well. Available in various sizes and thicknesses.The easy-to-use and flexible Minus Pads are made from different components: they are based on a ceramic-silicone compound and nano aluminum oxide. The pads consistently ensure optimal heat transfer. Only minimal pressure is needed for secure installation. All pads are environmentally friendly and RoHS compliant.
Compact dimensions, including a carrying handle – Perfect for taking with you High-quality steel, front and top panels with fine perforations for airflow Excellent workmanship Space for 240mm radiators Supports full-size gaming graphics cards Supports Mini-ITX and Micro-ATX motherboards Space for powerful SFX power supplies Excellent space utilization and a thoroughly well-thought-out concept Building a compact desktop mini-host is not only fun, but also presents some challenges. As the case size decreases, conflicts such as compatibility, heat dissipation, and the assembly experience increase. Compact design with high compatibility The material of the case is up to 2 mm thick and features a large number of mesh openings to improve heat dissipation while also providing eye-catching aesthetics. The removable handle, 2 mm thick, allows for easy mobility and can be effortlessly mounted and dismounted without affecting the internal hardware installation. It is attached to the case with a screwless hook connection, so when removed, there are no screw holes to impact the appearance. Space-saving yet powerful With a volume of only about 20 liters, it fits easily into various desktop environments. The main dimensions are 370 mm * 186 mm * 295 mm (depth/width/height, excluding handles/feet and other protrusions) and allow for compatibility with full-size Micro-ATX motherboards and long graphics cards, which almost match the dimensions of an ITX case. Maximum performance in small space It supports 240 mm radiators with a thickness of 30 mm. Thanks to the pull-out bracket, installation is easier and the difficulty of installing hardware in tight spaces is effectively reduced. The Z20 case is compatible with CPU coolers up to a height of 164 mm. Combined with top-mounted fans and a rear-mounted fan, CPU heat can be quickly dissipated. Important: When installing an Intel CPU, the cooler height limit is 164 mm; when installing AMD CPUs, the cooler height limit is 163 mm.
Kompaktes Gehäuse für UCFF-Boards (Intel NUC), für Intel NUC Pro 11. bis 13. Gen, lüfterlose Kühlung durch passives Gehäusedesign, gebürstetes Aluminium in Schwarz, Front mit 2x USB-3.0- und 2x USB-2.0-Ports, Platz für 1x 2,5-Zoll-Datenträger, VESA-kompatibel
The Features of the Kolink Observatory at a Glance Case designed for motherboards up to E-ATX 4 mm tempered glass side panel and front 4x 120 mm RGB fans include controller and remote I/O panel with 2x USB 2.0 / 1x USB 3.0 & HD Audio In/Out Support for two 240 mm radiators 2x 3,5/2,5" drive slots Graphics cards up to 38 cm long & CPU coolers up to 16 cm in height
Product kirjeldus: Thermaltake Level 20 GT ARGB - full Torn - extended ATX Product Type: System cabinet Form Factor: Full Torn värv: must I/O Ühendusi: 2 x USB 3.0 2 x USB 2.0 1 x USB 1 x microphone 1 x kõrvaklapid Supported Motherboards: ATX, microATX, Mini-ITX, Extended ATX System Cabinet Features: Supports 240 mm radiator in bottom, toetab 120/140 mm radiator in rear, tempered glass front panel, toetab 360/420 mm radiator in front panel, tempered glass top panel, toetab 280/360 mm radiator in top panel, toetab 1 x360 ja 1 x420 mm radiator in right side, tempered glass right panel, tempered glass left panel Power Device: No toiteplokk Specification Compliance: PS/2 mõõtmed (WxDxH): 58 cm x 29.4 cm x 59.2 cm kaal: 20.1 kg
No. of drive bays: 8 Weight: 6.52 Other features: CPU cooler height limitation: 170mm PSD length limitation: 170mm VGA length limitation: 260mm (With radiator on the right side) 366mm (Without radiator on the right side) Cooling System Front (Intake): 120 x 120 x 25mm Addressable RGB fan (1000rpm, 27.2 dBA) x 3 Rear (exhaust): 120 x 120 x 25 mm fan (1000rpm, 26 dBA) x 1 Fan Support Front: 3 x 120mm Top: 2 x 120mm, 1 x 140mm Rear: 1 x 120mm Right Side(In front of M/B Tray): 2 x 120 mm Bottom(On the power cover): 2 x 120 mm
Elegant Midi-Tower in Black, discreet design made of aluminum and steel, side panel made of Tempered Glass, for motherboards up to E-ATX (max. 305 x 285 mm), space for a maximum 360mm radiator on the top, graphics cards up to 330 mm, 2x 2.5-inch and 4x 2.5-inch/2x 3.5-inch drive bays.
Internal 6x 2.5 "/3.5", 2x 2.5 ", 8x 2.5" /3.5 "(optional), 2x 2.5" (optional), Front I / O 1x USB-C 3.1 (20-pin Key-A header), 2x USB-A 3.0, 1x microphone, 1x headphones, PCI slots 9 (2x riser card), Fan (front) 2x 140mm, 1000rpm, 18.9dB (A) or 3x 140mm (optional), Fan (rear) 1x 140mm, 1000rpm, 18.9dB (A), Fan (top) 3x 140mm (optional), Fan (other) 2x 140mm (optional), Radiator sizes 120/140/240/280 / 360mm in front, 120/140/240/280/360 / 420mm above, 120/140/240 / 280mm below, 120mm in the back, Mainboard up to ATX (285mm wide), Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6") / ATX (12 "x9.6") / E-ATX (12 "x11.2"), Power supply ATX (max. 250mm deep), PSU position below, CPU cooler max. 185mm height Graphics cards max. 315mm (491mm without HDD cage without front fan, 467mm without HDD cage with front fan), Color anthracite, inside anthracite, Lighting without lighting, Dimensions (WxHxD) 240x475x541mm, Volume 61.67l, Weight 10.50kg, Enclosure type miditower, Special features Cable management, dust filter, integrated fan control, window made of glass Note Mainboard and case manufacturers refer to different dimensions as E-ATX. Mainboards with E-ATX / SSI EEB dimensions of 305x330mm or 12 "x13" are not supported, w/o psu, FD-C-MES2A-04
Internal 2x 2.5 "/3.5" (transverse, hard disk cage), 2x 2.5 ", Front I / O 1x USB-A 3.0, 2x USB-A 2.0, 1x microphone, 1x headphone, PCI slots 4, Fan (front) 2x 140mm (optional), Fan (rear) 1x 120mm, 1000rpm, 16dB (A), Fan (top) 1x 200mm (optional) or 2x 140mm (optional), Radiator sizes 120/140/240 / 280mm at the front, 120/140/240 / 280mm at the top, 120mm at the back, Mainboard up to µATX, Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6"), Power supply ATX (max.160mm deep), PSU position below, CPU cooler max. 165mm height, Graphics cards max. 330mm, Color black, inside black, Lighting integrated LED control, integrated RGB LED lighting, Dimensions (WxHxD) 220x411x441mm, Volume 39.88l, Weight 6.10kg, Housing type mini tower, Special features dust filter, viewing window made of glass, CA-1Q9-00S1WN-00
Tootja koduleht: http://www.asus.com/Motherboards-Components/Gaming-Cases/TUF-Gaming/TUF-Gaming-GT301/ Mõõtmed: 214 x 482 x 426 mm (L x K x S) Kaal: umbes 7,2 kg Materjal: teras (šassii, ees), karastatud klaas (külgpaneel), plastik (ees, sisend- / väljundpaneel) Värv: must Kujutegur: ATX, Micro-ATX, Mini-ITX Paigaldatud ventilaatorid: 3x 120 mm (ees, D-RGB-LEDid) 1x 120 mm (taga) Kokku võimalik paigaldada: 2x 140 / 3x 120 mm (ees) 2x 120 mm (peal) 1x 120 mm (taga) Radiaatori kinnitused (HDD ja / või ventilaatori pesade osaline loobumine): 1x max. 280/360 mm (ees) 1x max. 120 mm (taga) Filter: ees, üleval, toiteallikas (eemaldatav) Kettabaasid: 2x 3,5 tolli / 2,5 tolli (sisemine; lahti ühendatud) 4x 2,5 tolli (sisemine) Toiteallikas: 1x tavaline ATX (valikuline) Laienduspesad: 7 I/O paneel: 2x USB 3.0 tüüp A (USB 3.1 Gen1) 1x heli sisse / välja 1x RGB-LED juhtimine Graafikakaardi maksimaalne pikkus: 320 mm Maksimaalne protsessori jahuti kõrgus: 160 mm Toiteallika pikkus kuni: 160 mm Komplektis: 1x ASUS TUF GT301 korpus 4x 120 mm ventilaatorid (eelinstallitud) 25x kruvi põhiplaadi ja 2,5-tolliste draivide jaoks 8x kruvi 3,5-tolliste ajamite ja toiteallika jaoks 1x Phillipsi adapter vahetükkide jaoks 8x kaablikinnitust 2x kummikorgid graafikakaardi jaoks 1x hoidik kruvidega kõrvaklappide jaoks 3x takjakinnitusega kaablisidemed
I/O PORTS: 2 x USB 3.2 Gen1 Type-A / 1 x HD Audio / 1 x Mic DRIVER BAYS: 2 x 3.5” (compatible with 2.5”) + 3 x 2.5” CASE EXPANSION SLOTS: 7 MAXIMUM GPU LENGTH: 330 mm MAXIMUM CPU COOLER LENGTH: 160 mm POWER SUPPLY: Standard ATX 160 mm, max to 200 mm (without 3.5” HDD case installed) COOLING LAYOUT: Front - Up to 3 x 120 mm / 2 x 140 mm Top - Up to 2 x 120 mm / 2 x 140 mm Rear - Up to 1 x 120 mm PRE-INSTALL FAN: Front - 2 x 120 mm addressable RGB LED Fan included Rear - 1 x 120 mm System Fan included RADIATOR LAYOUT: Front- Up to 240 mm Top - Up to 240 mm Rear- Up to 120 mm FORM FACTOR: Mid-Tower SUPPORT MB FORM FACTOR: ATX / mATX / Mini-ITX DIMENSION: 421(D) x 210(W) x 499(H) mm 17.05(D) x 8.27(W) x 19.65(H) inch WEIGHT: 5.64 kg
Stylischer Mini-Tower mit gutem Airflow, Seitenfenster aus Temperglas, zwei digital adressierbare RGB-Lüfter, integrierter RGB-Controller, modulare Staubfilter, I/O-Panel mit 1x USB 3.1 Typ C & 2x USB 3.0 Typ A, 4x 2,5-Zoll-SSDs
