TUF Gaming GT502 Horizon Panoramic Perfection Boundless Panoramic Design Seamless view unobstructed by a front pillar Dual-Chamber Chassis Independent cooling zones for the CPU and graphics cards Custom ARGB Lighting Kit Available for purchase. Tool-Free Side Panels Easily remove the side panels by simply pressing a button hidden on the rear of the chassis.
ASUS A21 PLUS Case The ASUS A21 PLUS microATX case offers support for hidden-connector motherboards, 360 mm radiators and 380 mm graphics cards, with two color options, four pre-installed ARGB fans and clean cable management. - Hidden Connectors: Compatible with motherboards featuring hidden connectors and maximizes clean cable management for a clutter-free build. - Broad Compatibility: A21 PLUS supports up to 360 mm radiators, graphics cards up to 380 mm in length and CPU air coolers up to 165 mm in height. - Capable Cooling: A21 PLUS features four ARGB fans for exceptional cooling, and the front-panel mesh is 40% porous to maximize the balance of airflow, dust filtering and RGB visibility. - Ample cable management: The A21 PLUS provides a compartment behind the motherboard that is 33 mm wide to keep your wiring tucked away and tidy.
O11 DYNAMIC MINI Think Big. Build Small. O11D MINI adding to the O11 Dynamic series, the classic and mordern looking. A case that would accommodate the maximum number of water-cooling configurations without being oversized. With a modular back panel design, the user has the option to choose from 3 slots/ 5 slots/ 7 slots I/O shield to optimize the case to the configuration of user’s choice. Supports mini-ITX, micro-ATX, ATX, and E-ATX motherboard sizes. and up to 9 fans to cool the chassis.
O11 DYNAMIC EVO RGB • Two L-shaped light strips on top and bottom with befitting lighting effects. • Front and side tempered glass panels with a removable pilar for a seamless view of components and RGB lighting. • 2 heights adjustable motherboard rear I/O and mounting points. • Supports up to 420mm radiator on top, and 360mm radiator on side and bottom. • Supports 140mm fans x3 on top, side, and bottom. • Cable management friendly with more space at the second chamber. • Optional accesories for vertical GPU or upright GPU mounting.
ASUS A31 PLUS Case The ASUS A31 PLUS is a PC case crafted for minimalist mainstream DIY PC builders. It supports a variety of AIO coolers and graphics cards, and easily accommodates motherboards with hidden connector designs, ensuring a clean, clutter-free setup. The ASUS A31 PLUS ATX case offers support for hidden-connector motherboards, 360mm radiators and 380mm graphics cards, with Black or White color options, four pre-installed ARGB fans and clean cable management. Ready for Hidden Connectors: Built for motherboards featuring hidden connectors to optimize cable management for a clutter-free setup. Broad Compatibility: The A31 PLUS supports up to 360mm radiators combined with fans of up to 80mm thick, plus graphics cards up to 380mm in length and CPU air coolers with heights of up to 165mm. Panoramic Design: Tempered glass panels on the front and side offer unobstructed views of the main chamber. 8° Angled Base: The golden angle combines functionality and aesthetics, enhancing airflow efficiency for better thermal performance while widening the viewing angle for a more immersive experience.
Tootekood: PROART PA602 WOOD METAL PWM BLACKKorpused
ProArt PA602 Wood Edition Metal Panel Superb Cooling, Timeless Design The ProArt PA602 Wood Edition showcases a crafted wooden design, embodying your unique style while promoting sustainable elegance with environmental certification from the Forest Stewardship Council® (FSC®). A six-stage process integrates durable and beautiful thermowood with optimal airflow and enhanced cooling, to inspire creative professionals seeking focused workflows. With a front panel designed for maximum air intake, a thick pre-installed 140 mm rear fan and two 200 mm front fans, an integrated fan hub and support for a 420 mm radiator, it delivers top-tier performance right out of the box.
Darkflash M305 Mesh fanless computer case (White)Darkflash M305 Mesh is a compact M-ATX case that combines futuristic design with practical solutions. It offers a mesh front for better airflow, a tempered glass panel for easy access and presentation of components, the ability to mount as many as 7 fans, support for high-performance graphics cards and CPU (Central Processing Unit, processor) cooling, and a functional I/O panel with a USB 3.0 port (Universal Serial Bus, an interface used for powering and charging devices, as well as for data transfer). Thanks to its well-thought-out design and ample interior space, this model will be perfect for both modern gaming setups and PCs for everyday use.Design and functionalityDarkflash M305 Mesh is an option for those who appreciate minimalist design, functionality and freedom in computer configuration. The front of the case has been made in an industrial style, with a full mesh panel, which first of all provides excellent airflow into the case, but also looks stylish. This solution is especially important for more demanding sets, where proper cooling directly affects the stability of hardware operation.Efficient ventilation and free coolingAlthough the M305 Mesh does not include pre-installed fans, its design has been prepared so that the user can independently select and install up to seven 120mm fans. Such flexibility gives you the opportunity to customize your cooling system - from a basic layout for an office PC to an elaborate gaming setup with advanced cooling. The mesh front not only improves air circulation, but also reduces heat buildup of components even under intense load.Tempered glass for more styleA screw-mounted tempered glass side panel allows you to quickly access the computer's interior without the need for tools. This is especially convenient for frequent kit modifications. At the same time, the transparent panel is great for backlit components, allowing you to expose the computer's interior and create an aesthetically pleasing whole.Compact size that does not limit the possibilitiesThe case supports M-ATX (Micro Advanced Technology eXtended, a motherboard format smaller than the standard ATX) and ITX (Information Technology eXtended, a very compact motherboard format) motherboards. Despite its small size (325 × 195 × 387 mm), its interior has been designed for maximum functionality. Inside there will be room for a CPU cooler up to 160 mm high and a graphics card up to 300 mm long. This allows it to accommodate most popular components without worrying about compatibility. The chassis also has room for two SSDs (Solid State Drive, a solid state drive) and two traditional HDDs (Hard Disk Drive, a classic hard drive), giving you plenty of room for storage expansion.Functional I/O panel and modern connectorsThe top of the chassis features a well-placed I/O panel with easy access to the most important ports. The presence of a USB 3.0 connector guarantees fast data transfer and convenient connection of external devices such as flash drives, portable drives or other accessories. The clear layout of the top panel simply makes it more convenient to use the computer on a daily basis.Includedmotherboard screws x12hard drive screws x4power supply screws x6iron columns x2manual ManufacturerDarkFlashModelM305 MeshHousing typeMini TowerSide panelTempered glassMotherboard standardM-ATX, ITXPSU standardM-ATX, bottom of caseSlots for internal drives4 (2 x 2.5", 2 x 3.5")Expansion card slots4Max PSU length160 mmMax length of graphics card300 mmMax height of CPU cooler160 mmMax number of fans7Fan mounting optionsSide: 120 mm x2; Front: 120 mm x2; Rear: 120 mm x1; Top: 120 mm x2.Water cooling mounting options-Number of fans installedNo fans includedType of fansNo fans includedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x2, HD AudioMaterial0.45 mm SPCCColorWhiteHeight387 mmWidth195 mmDepth325 mm
This cable from Aquacomputer, is used for emergency shutdown of the computer in case of alarm. It is compatible with the Vision series and connects to the power button input of the main board without affecting the power button. Included in delivery: 1x cable (length 70cm) Compatible with the following devices: cuplex cryos NEXT with VISION VISION connection terminal for cryographics (23664, 23665, 23666, 23667) VISION Touch (53232, 53235) OCTO (53286) Note: Before connecting the cable, please make sure that the alarm output/tacho signal output of the corresponding device is configured correctly! Brief instructions: Settings for VISION devices (in aquasuite software): Tab "Alarm settings": Selection item "Power button (53216)" must be activated. Only then connect the alarm cable to the mainboard. Then check the correct function by provoking an alarm. If the PC does not switch off, turn the plug on the mainboard 180 degrees and repeat the test. During the emergency shutdown data can be lost because the operating system and open programs are not closed properly!
Build Visibility and Hardware Management, Perfectly BalancedThe dual-chamber design of the FV150 RGB aligns aesthetics with functionality: the glass panels of one chamber are perfect for a clean view of your build while cables, storage and PSU are discreetly hidden in a second chamber. A bottom fan bracket lets you secure fans to the bracket prior to installation, allowing for a completely stress-free setup. GPU and ATX motherboard compatibility offers unlimited flexibility for multiple build configurations.Dual chamber design lets you show off your build while hiding cables, storage drives, and PSU.Supports up to 400mm GPUs and vertical GPU orientation.Supports Mini-ITX, Micro-ATX, ATX motherboards.Engineered bottom fan bracket allows you to attach fans prior to installation.
The Krux Helio is a compact microATX case featuring a modern design with dark wood accents on the front, inspired by the Palum model. Its appearance makes it a great fit for offices, living rooms, or gaming setups. Despite its small size, it offers space for up to eight 120mm fans (three at the front, two at the bottom, two at the top — 140mm also possible — and one at the rear), and it comes with a 120mm PWM fan pre-installed at the back. A tempered glass side panel provides a view of the interior, while rounded edges emphasize its modern look. Thoughtfully designed dust filters and an easily removable front panel simplify cleaning and fan installation. Inside, it accommodates graphics cards up to 320mm, power supplies up to 170mm, and CPU coolers up to 175mm. There are also mounts for two 3.5" and one 2.5" drives, as well as radiator support up to 280mm. The I/O ports are located on the lower side and include USB-C 2.0, USB-A 3.0, a 3.5mm combo audio jack, as well as power and reset buttons — especially convenient if the case is placed on a desk.
Compact showcase midi tower in white, featuring 5x reverse infinity fans + 1x UNI FAN SL-INF 120, dual-chamber design for clean builds, supports up to 9 fans & radiators, 40 ARGB LEDs per fan with infinity effect, vertical & horizontal GPU mounting included With this bundle featuring the Lian Li O11 Dynamic Mini V2 in White, 5x UNI FAN SL-INF 120 Reverse Blade, and 1x UNI FAN SL-INF 120, you can build a compact high-end showcase with impressive cooling performance and spectacular RGB visuals. Despite its space-saving dimensions, the case offers ample room for powerful hardware, while the infinity fans perfectly showcase your system. O11 Dynamic Mini V2 in White with tempered glass on the front and side 5x UNI FAN SL-INF 120 Reverse Blade for a uniform infinity look 1x UNI FAN SL-INF 120 for additional airflow Graphics cards up to 400 mm can be mounted horizontally or vertically Back-connect support for especially neat cable management Daisy-chain connector system for minimal cable clutter O11 Dynamic Mini V2 – Compact, flexible, powerful The Lian Li O11 Dynamic Mini V2 combines a compact format with high hardware compatibility. It supports Mini-ITX, mATX, and ATX motherboards – including models with a back-connect design for an especially clean look. Large graphics cards up to 400 mm can be mounted both horizontally and vertically. Suitable GPU brackets are already included. Thanks to well-designed cable holders, Velcro straps, and a clever layout, your build stays tidy and organised. Note: The Lian Li O11 Dynamic Mini V2 is not compatible with the Lian Li GALAHAD II TRINITY PERFORMANCE AiO water cooling system. Powerful cooling performance with up to nine fans The case can accommodate up to nine fans as well as multiple radiators. A mesh panel on the top and a dust filter on the bottom ensure optimal airflow and protect your components over the long term. The vertically adjustable motherboard standoff allows flexible radiator positioning – ideal for AiO or custom water cooling setups. UNI FAN SL-INF 120 Reverse Blade – Uniform infinity look The Reverse Blade variant creates reversed airflow while the visible side with the infinity mirrors faces outward. This keeps your build visually perfectly coordinated – even with different airflow configurations. With up to 2,100 RPM, 108.05 m³/h airflow volume, and 2.02 mmH2O static pressure, the reverse fans are excellent for radiators and case ventilation. UNI FAN SL-INF 120 – Quiet performance with strong pressure The additional UNI FAN SL-INF 120 is a strong complement to your setup with 104.14 m³/h airflow volume and 2.66 mmH2O static pressure – all at only 29 dB(A) under full load. All fans feature 40 digitally addressable RGB LEDs and can be conveniently controlled via the L-Connect 3 software. Clean installation thanks to daisy-chain system The modular connector system links multiple fans directly via integrated pin contacts. Power, PWM, and ARGB signals are internally passed on – for particularly tidy cable management without unnecessary cable clutter. Note: The connector system of the SL-INF series is only compatible with SL-INF components and cannot be combined with the SL or AL series.
Do you want a compact, stylish PC case with modern features and a view of your system? The Thermalright TL-M10 Vision is a Micro-ATX gaming case with a large LCD display, ARGB lighting, and versatile cooling and expansion options – made for powerful builds in a compact format. Micro-ATX case with a large integrated LCD display for system information or graphics Addressable RGB lighting and a clear view through the tempered-glass side window Supports modern I/O ports such as USB-C, USB 3.0, and audio Flexible cooling options with support for numerous fans and radiators Room for powerful components such as large graphics cards and CPU coolers Thermalright TL-M10 Vision – Premium Micro-ATX case with display The Thermalright TL-M10 Vision was designed as a compact Micro-ATX case that combines functionality and showmanship. In addition to the large integrated LCD display, which you can use for system information or custom graphics, the tempered-glass side window provides a direct view of your hardware.Modern design and versatile cooling options With addressable RGB lighting and numerous mounting points for fans and radiators, the TL-M10 Vision offers both visual highlights and a solid foundation for efficient cooling strategies. Thanks to support for large CPU coolers and graphics cards, it is suitable for powerful gaming or workstation builds.Component compatibility and front ports In the I/O area, modern ports such as USB-C and multiple USB 3.0 ports as well as audio jacks are available. The interior of the case is designed to provide space for common hardware configurations in the Micro-ATX segment, including support for common cooler and radiator sizes
This high-quality black aluminum housing for the Raspberry Pi 5 combines protection, design and optimal cooling. It offers space for the original Raspberry M2 HAT and is equipped with a large heat sink, two quiet PWM-controlled fans and a sophisticated air duct. This dissipates heat efficiently and provides stable performance even under high loads. The robust, anodized aluminum gives the housing a sophisticated look, while precise cutouts and easy installation make it the perfect choice for demanding projects. Perfect for anyone who wants to combine functionality and style. Type housing Color black EAN 4250236828848 Manufacturer no. RB-AlucaseP5-M2 Material aluminum Notes Active cooling via dual PWM fans, each 25mm Rear connection of the mainboard No Note Housing for Raspberry Pi in combination with the original M.2 hat Accessories available Dual PWM fans, air duct, heat sink, spacers, mounting material Dimensions Width: 61mm x Height: 34mm x Depth/Length: 108mm Weight 164 grams
