Midi-Tower in Schwarz, Front mit Acrylglas, Space Grey Metallic-Finish, Seitenteil aus Tempered Glass, mit Zweikammerdesign, inkl. 1x 120-mm-Lüfter, Grafikkarten bis 297 mm, CPU-Kühler bis 158 mm
Tootjakoduleht: http://www.msi.com/PC-case/MPG-GUNGNIR-110R Mõõtmed: 215 (W) x 430 (D) x 450 (H) mm Materjal ja kaal: 7.9Kg Kujutegur: ATX / M-ATX / Mini ITX Kettaraamid: 2.5’ SSD x 2 + 3.5” with 2.5” combo tray x 2 I / O-paneel: USB 3.2 Gen 1 Type A x 2 USB 3.2 Gen 2 Type C x1 Audio x1 Mic x1 GPU maksimaalne pikkus: 340mm Maksimaalne protsessori jahuti kõrgus: 170mm Maksimaalne PSU pikkus: 250mm Ventilaatorite tugi: Taga - 1 x 140mm/120mm Ees - 2 x 140mm/ 3 x 120mm Üleval - 2 x 140mm/ 3 x 120mm Radiaatori kinnitus: Taga - 120mm Ees - 120, 140, 240, 280, 360 mm Üleval - 120 / 240mm Kaasas: Taga - 120mm ARGB Fan x1 Ees - 120mm ARGB Fan x 3
Midi-Tower PC case in ATX form factor, made of steel and plastic, foldable side panel with magnetic closure, front made of fine mesh, GPU support up to 330 mm, suitable for 360 mm radiator
Midi-Tower in Schwarz, 4x ARGB-Lüfter vorinstalliert, Mesh-Front, Radiatoren bis zu 360 mm, Grafikkarten bis 290 mm Länge, 2x USB 3.0/ 1x 2.0, Netzteilabdeckung
CORSAIR Hydro X Series XF Compression Fittings are the perfect fit for your soft tubing custom cooling system, available in a range of styles and equipped with an ultra-tight compression seal.
Wall-mounted showcase case, ATX form factor, designed for custom water cooling, vertical GPU mounting, two large reservoirs, dual-loop cooling possible, radiators up to 360 mm, graphics cards up to 400 mm in length.
Internal 6x 2.5 "/3.5", 2x 2.5 ", 8x 2.5" /3.5 "(optional), 2x 2.5" (optional), Front I / O 1x USB-C 3.1 (20-pin Key-A header), 2x USB-A 3.0, 1x microphone, 1x headphones, PCI slots 9 (2x riser card), Fan (front) 2x 140mm, 1000rpm, 18.9dB (A) or 3x 140mm (optional), Fan (rear) 1x 140mm, 1000rpm, 18.9dB (A), Fan (top) 3x 140mm (optional), Fan (other) 2x 140mm (optional), Radiator sizes 120/140/240/280 / 360mm in front, 120/140/240/280/360 / 420mm above, 120/140/240 / 280mm below, 120mm in the back, Mainboard up to ATX (285mm wide), Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6") / ATX (12 "x9.6") / E-ATX (12 "x11.2"), Power supply ATX (max. 250mm deep), PSU position below, CPU cooler max. 185mm height Graphics cards max. 315mm (491mm without HDD cage without front fan, 467mm without HDD cage with front fan), Color anthracite, inside anthracite, Lighting without lighting, Dimensions (WxHxD) 240x475x541mm, Volume 61.67l, Weight 10.50kg, Enclosure type miditower, Special features Cable management, dust filter, integrated fan control, window made of glass Note Mainboard and case manufacturers refer to different dimensions as E-ATX. Mainboards with E-ATX / SSI EEB dimensions of 305x330mm or 12 "x13" are not supported, w/o psu, FD-C-MES2A-04
Lüfterloses Design-Case von Akasa, für den Raspberry Pi 4B, aus Aluminium, Aussparungen für alle wichtigen Anschlüsse, inklusive Kühlblöcke und Thermal-Pads und Wärmeleitpaste
be quiet! System Power B10. Koguvõimsus: 550 W, AC-sisendpinge: 200 - 240 V, AC-sisendsagedus: 50 Hz. Emaplaadi toitepistmik: 20+4 pin ATX, Emaplaadi toitekaabli pikkus: 55 cm, SATA toitekaabli pikkus: 450,550,570,670,690 mm. ...
Volcano Expanse T Apex ARGB Midi Black case Excellent airflow. Roomy design. 4 ARGB fans included. Convenience of installation and expansion. Gaming source Here it is - the source of gaming - the Volcano Expanse Apex ARGB Midi computer case. Because what would a real gaming computer be without a housing in which all the components can be mounted with the utmost convenience and precision? Moreover, without any of the frills found in new housings, you will find a classic in a modern version. There are plenty of practical solutions for powerful gaming computers - an easily removable front filter and one under the power supply, it is possible to install a frame for three additional fans instead of a cable organizer, plenty of space for gaming components and great air circulation. When looking for the best solutions, it is good to go back to the source. Interior design The Volcano Expanse Apex ARGB MIDI case allows you to arrange the interior in such a way that the computer is truly yours! At the height of the motherboard, there is a dedicated space for mounting a cable tray or fan frame. It's up to you to decide how to use the possibilities of arranging the interior of your computer. The tray allows you to organize the cables and keep the inside of the case tidy. This will be appreciated by people who focus primarily on aesthetics and need to keep their computer in good order. And if you are building a real gaming monster and need the best possible cooling of your components, instead of the tray you can install a frame for three additional 120 mm fans. Turn your computer into a refrigerator By unscrewing the metal element designed to organize cables, you can install a dedicated frame for fans and cool the computer even better. In the triangle of dreams The Volcano Expanse T APEX ARGB MIDI case is designed with triangle-shaped panels. Hence the letter T in the name of the housing, which comes from the word triangle. How does it differ from its twin design, Volcano Expanse S ARGB Midi? In this version, due to the different design of the panels, dust filters have been added on the side and top of the housing. And since there is no accounting for taste, the choice is yours. Whichever version you choose, it will be a great decision. Easy! Keeping your computer clean is very important. To minimize dust entering the interior, an easily removable dust filter is located at the front between the front panel and the housing. All you need to do is simply remove the front panel (you don't have to dismantle the entire front) and dismantle the filter to clean it quickly and conveniently. The use of practical solutions will be appreciated by anyone who systematically cares about the cleanliness, durability and functionality of their computer. Cleaning the front panel is easy! Lots of fans Keeping components running cool is paramount. Thanks to this, they work more efficiently and their service life increases. Factory-installed ARGB fans (3 x 140 mm at the front and 1 x 140 mm at the back) ensure good air flow, effectively cooling the graphics card and processor. However, if you want to have even greater configuration options, you can install three additional 120 mm or 2 x 140 mm fans on the top panel. Moreover, there is space on the motherboard mounting wall for three 120 mm fans after installing a special frame instead of the cable tray. In total, you can have up to 10 fans here! Water cooling The housing is suitable for water cooling installation. At the top of the case there is space for a radiator up to 360 mm. The same size cooler will also fit in place of the factory-installed fans on the front of the case. The same cooler (360 mm) can also be mounted on a dedicated frame of the motherboard wall, but its thickness cannot be greater than 52 mm. At the back, there is space for 120/140 mm water cooling. The introduced solutions are intended to create a real gaming machine for every game. And all this in a solid, airy construction. Without screws The times when you had to unscrew panels are long gone. In the Volcano Expanse case, we offer pleasant and simple solutions so that you can build your dream computer with a smile. All panels are mounted with snaps - you don't need any tools to remove the panel and conveniently install the components. Need to add RAM sticks? Blow out the dust from the interior? You can remove the panels with a smooth movement of your hand without having to unscrew them. Controller The case is equipped with an ARGB fan controller. Thanks to this, you can manage their speed and backlight. A total of 9 fans can be connected. At your fingertips The panel with USB/Audio inputs is placed at the top of the case, giving you convenient access to the connectors when the case is placed under the desk. There are 2 USB 3.0 connectors and one USB-C connector on the panel. Classically, there is also a microphone and headphone input, as well as a power button and fan control. Dust filter There is a dust filter under the power supply. You can easily remove and install the filter, which will keep your computer clean while increasing the efficiency and safety of the power supply and other installed components. It was designed for ease of assembly and disassembly, which is facilitated by structural elements equipped with magnets. Access to the filter is possible both from the front and back of the housing. Dust filters are also installed on the top and side panels. A place for your favorite games There will be plenty of space for your favorite games. The housing allows the installation of two 2.5 drives on the motherboard tray. Additionally, you can install two 3.5 mm in the power supply tunnel. With this amount of disk space, you can easily plan to install new games. Removable caps and vertical GPU mounting All PCI/PCIe expansion card caps are removable. Players will also appreciate the possibility of vertically mounting the graphics card, because the metal frame in which the caps are placed can be unscrewed.
Tutvustame Win EM-013, keerukat ja mitmekülgset elektroonilist metronoomi, mis on loodud selleks, et aidata muusikutel kõigil tasemetel parandada oma ajastust ja rütmioskusi. Selles elegantses ja kompaktses seadmes on ühendatud uuenduslik tehnoloogia ja kasutajasõbralikud funktsioonid, mis teeb sellest asendamatu vahendi nii harjutamiseks kui ka live-esinemiseks. Win EM-013 on intuitiivse kasutajaliidesega, mis muudab selle kasutamise lihtsaks, ning selge digitaalne ekraan võimaldab teil määrata täpseid temposeadeid vahemikus 30 kuni 250 lööki minutis. See pakub laia valikut erinevatele muusikastiilidele sobivaid taktimärke ja rütmimustreid, nii et muusikud algajatest kuni professionaalideni leiavad oma harjutusvajaduste jaoks sobiva rütmi. Win EM-013 konstruktsiooni keskmes on vastupidavus ja kaasaskantavus. Tänu kergele konstruktsioonile ja mugavale suurusele on seda lihtne kanda pilli kohvris, reisikotis või taskus, nii et saate selle asendamatu tööriista kõikjale kaasa võtta. Metronoomil on sisseehitatud kõlar, mis annab selget ja tugevat heli, mida saab reguleerida vastavalt erinevatele keskkondadele, nii et saate rütmi kuulda ka valjemas keskkonnas. Samuti on sellel kõrvaklapipesa privaatseks harjutamiseks, nii et kasutajad saavad keskenduda ilma häireteta. Win EM-013 on varustatud ka tap tempo funktsiooniga, mis võimaldab kasutajatel tempo seadistada lihtsalt nupule vajutades - see on mugav funktsioon muusikutele, kes soovivad tempot kuulmise järgi sobitada. Lisaks võimaldab mälufunktsioon salvestada eelistatud seaded, mis tagab kiire ja lihtsa seadistamise tulevaste seansside jaoks. Win EM-013 on mõeldud pikaajaliseks kasutamiseks, seega töötab see usaldusväärselt alati, kui inspiratsioon tabab. Olenemata sellest, kas olete õpilane, õpetaja või kogenud esineja, Win EM-013 on usaldusväärne ja asendamatu tööriist veatu ajastuse ja muusikalise esituse täiustamiseks. Tänu oma täpsusele, kasutusmugavusele ja kaasaskantavusele on see metronoom loodud selleks, et aidata ja inspireerida muusikuid saavutama rütmilist tipptaset.
Premium Kabel-Set von Corsair, Schwarzes Textil-Sleeving aus Paracord-Material, für Frontpanel-Anschlüsse von Gehäusen, insgesamt vier Sleeve-Kabel für USB-, Audio- und Button/LED-Kabel, je 300 Millimeter Länge
Full mesh construction on the front ensures optimal ventilation The sense of unity between the front mesh and the tempered glass on the side panel creates a unique Zalman design. Exceptional airflow Designed for optimal air intake with a full mesh front panel and pre-installed addressable RGB fans allows for optimal and maximum airflow. High performance addressable RGB fan The mesh front panel and RGB fans provide optimal airflow and stunning RGB lighting effects (supports up to 8 fans). ARGB controller Press the LED I/O button to change the LED pattern and color (26 patterns) Press and hold the LED button for 3 seconds to sync the motherboard after the white light flashes once Press and hold the LED button for 6 seconds to turn off the LED after the white light flashes twice Press the LED button again to disconnect the motherboard sync and change the controller mode Magnetic dust filter Protects components and ensures unobstructed airflow by filtering dust. Bottom dust filter Protects the power supply from dust accumulation. Easy-to-use hinged glass side panel A hinged glass panel provides easy access to the interior.
Tootekood: Z9 Iceberg MS BlackGTIN: 8809213763182Korpused
Zalman Z9 Iceberg MS ATX Case - Black, Tempered Glass The Zalman Z9 Iceberg MS ATX case in stylish black combines modern aesthetics with innovative functions and is perfect for gamers and PC enthusiasts who value the highest quality. With its tempered glass side window, it offers an impressive view of the installed hardware and optimally showcases RGB components. This midi tower case supports ATX, Micro-ATX and Mini-ITX motherboards and thus offers maximum flexibility for different builds. The well-thought-out airflow structure with generous ventilation openings and the option of installing up to 6 fans ensures effective cooling even during intensive use. In addition, the Zalman Z9 Iceberg is equipped with dust filters that keep the interior clean and extend the lifespan of the components. The case features numerous connection options on the I/O panel, including USB 3.0, USB 2.0, HD Audio and more to ensure fast connectivity. The elegant, minimalist look with clean lines and high-quality design fits perfectly into any environment and makes the Zalman Z9 Iceberg case a real eye-catcher. Main features of the Zalman Z9 Iceberg MS ATX case: High-quality tempered glass side window for optimal hardware view ATX, Micro-ATX and Mini-ITX compatibility for flexible builds Efficient cooling with support for up to 6 fans Integrated dust filters to extend hardware life Elegant, black design for demanding users Choose the Zalman Z9 Iceberg MS ATX case if you want to combine style and functionality in your next build. Ideal for gamers, PC hobbyists and anyone who values outstanding quality!
Minimalist Midi-Tower, includes one Mercury AM120S fan, up to five fans possible, GPUs up to 340 mm / CPU up to 162 mm height, up to four drives possible, radiator up to 240 mm, 1x USB-C / 2x USB-A
Beautifully crafted and engineered to maximize cooling potential with its amazing expansion flexibiltiy, the Enthoo Pro is the budget friendly mid-tower from Phanteks. Embracing many features from the Enthoo Primo, without the price tag. This case has mulitple radiator support, removable ssd bracket, closed HDD panel, and velcro cable management. The Enthoo Pro, trying to establish its own solid reputation like the award winning Enthoo Primo.Features:Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks’ new redesigned and better performing SP series fans. Budget friendly case, Phanteks’ Enthoo Pro, unleash unlimited possibilities.KujutegurFull-TowerTüüpPCMaterjalPlast, Teras5,25" lahtrite arv33,5" lahtrite arv6Emaplaadi toetatud kujuteguridATX,EATX,Micro-ATXToote värvMustAknagaEi2,5" salvede arv7Sisemiste 3,5" salvede arv6Väliste 5,25" kettalahtrite arv3SobilikMängimineLaienduspesade arv8CPU jahuti maksimaalne kõrgus19,3 cmGraafikakaardi maksimaalne pikkus47,2 cmKaasas toiteplokkEiUSB 2.0 portide arv2USB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendJahAudioväljundJahInstallitud esiventilaatorid1x 200 mmMaksimaalne esiventilaatorite arv2Toetatud esiventilaatorite läbimõõt120,140,200 mmMaksimaalne tagaventilaatorite arv1Toetatud tagaventilaatorite läbimõõt120,140 mmMaksimaalne ülemiste ventilaatorite arv3Toetatud ülemiste ventilaatorite läbimõõt120,140,200 mmMaksimaalne alumiste ventilaatorite arv2Toetatud alumiste ventilaatorite läbimõõt120,140 mmVentilaatori kiirus1200VedelikjahutusJahToetatud eesmise radiaatori ventilaatori suurused240 mmToetatud tagumise radiaatori ventilaatori suurused140 mmToetatud ülemise radiaatori ventilaatori suurused420 mmToetatud kõvakettasuurused2.5"Laius235 mmSügavus550 mmKõrgus535 mmKaal11,4 kgPakendi kaal13,3 kgMüratase19 dB
Edler Big-Tower von PHANTEKS, Seitentür und -fenster aus Tempered Glass, optimiert für Luft- und Wasserkühlung, bis zu 503 mm lange Grafikkarten, adressierbare RGB-LED-Beleuchtung, für Dual-System-Builds geeignet
Elegant Midi-Tower in Black, discreet design made of aluminum and steel, side panel made of Tempered Glass, for motherboards up to E-ATX (max. 305 x 285 mm), space for a maximum 360mm radiator on the top, graphics cards up to 330 mm, 2x 2.5-inch and 4x 2.5-inch/2x 3.5-inch drive bays.
