Midi-tower with improved integrated 4K screen including touch function688 x 2,560 (2.5K) resolution and 60 Hz refresh rateSide panel and front made of tempered glassFresh air intake at the bottomVertical mounting of the graphics card possiblePCIe 4.0 riser cable includedRadiators can be mounted on the side, top, or rearGraphics cards up to a length of 390 mm possibleMaximum CPU cooler height of 180 mm
Tootekood: AIR 100 LITE (B)GTIN: 4710562740691Korpused
Small midi tower with tempered glass on the side, up to eight fans, space for a radiator up to 280mm, motherboards up to Micro-ATX, GPU up to 330mm and CPU cooler up to 161mm in height, up to four drives possible, two 120mm fans includedSmall case with tempered glass side panel Efficient cooling options with up to eight fans and radiators up to 280mm Support for motherboards up to Micro-ATX Space for graphics cards up to 330mm and CPU coolers with a height of up to 161mm Up to four drives possible Two 120mm fans included The Montech AIR 100 LITE: Minimalist case with high cooling performance The Montech AIR 100 LITE is the smaller variant of the Montech AIR 100 and impresses with its lightweight and minimalist design. Nevertheless, this midi tower offers extensive options for installing your hardware - particularly a variety of fans to keep your system cool. Well-cooled with fans and radiators Despite its small size, up to eight fans can be installed in the tower. The front supports a maximum of three 120mm or two 140mm fans. You can install two 120mm or 140mm fans at the top. A further 120mm fan can be installed at the rear, as well as up to two more 120mm fans above the power supply chamber. Two 120mm fans are already included at the front and rear. If you prefer water cooling - whether an all-in-one water cooler or a custom-built water cooling system - there are several locations where a radiator can be installed. The front supports a radiator up to a maximum of 280mm, the top supports a 240mm radiator, and another 120mm radiator can be installed at the rear. Hardware options The midi tower supports the installation of graphics cards up to 330mm in size. Motherboards up to Micro-ATX format are feasible. The CPU cooler should not exceed a height of 161mm. To store programs and games, up to four drives can be installed.
Dieses Aluminium-Gehäuse von Delock dient dem Einbau einer 2.5″ SATA Festplatte oder SSD. Trotz der schlanken Bauform können Festplatten bis zu einer Höhe von 9,5 mm eingebaut werden. Dank des VIA Chipsatzes unterstützt dieses Festplattengehäuse SuperSpeed USB mit bis zu 10 Gbps Übertragungsgeschwindigkeit. Somit kann die volle SATA 6 Gb/s Übertragungsrate der Festplatte ausgenutzt werden. Über eine am Gehäuse verbaute USB Type-C Buchse wird das externe Gehäuse mit einem PC oder Notebook verbunden. Das beiliegende USB Type-C zu USB Typ-A Kabel ermöglicht den Anschluss an eine freie USB Typ-A Buchse. Selbstverständlich kann das Gehäuse auch via optionalem USB Type-C Kabel an eine freie USB Type-C Buchse oder einen freien Thunderbolt Port angeschlossen werden.
Wall-mountable showcase case, ATX form factor, designed for custom water cooling, vertical GPU mounting, up to 360 mm radiator, graphics cards up to 400 mm in length.
Darkflash DS900W computer case without fans (Black).The Darkflash DS900W case combines modernistic design with high functionality - the panoramic glass without A-pillar (A-Pillar) strikingly exposes the interior, and the well-thought-out design ensures stability and easy installation. It supports up to 10 fans and 360mm cooling to ensure efficient heat dissipation. Dust filters protect components, and the large internal space allows for mounting high-performance components. A USB Type-C (Universal Serial Bus, a connector standard used to power or charge electronic devices, as well as transfer data) connector on the front ensures fast and seamless connectivity, while the aesthetically pleasing finish and sturdy construction make it a great choice for those looking to assemble a high-performance and modern PC setup.Minimalist design with a panoramic viewThe Darkflash DS900W is for those looking for a sleek, futuristic design combined with functionality. The woodgrain accent front and double-sided tempered glass construction give the case a unique style and provide a 270° panoramic view of components without a disruptive A-pillar, making the entire interior composition aesthetically pleasing and transparent. With Darkflash, you'll build a stylish gaming space while providing your computer components with maximum protection.Stable design without compromisesThe case is based on a mechanical structure, which is shaped like a closing bracket, which translates into greater rigidity and resistance to deformation. The lack of a classic A-pillar does not negatively affect stability - on the contrary, the whole structure is characterized by high load-bearing capacity and strength, which will be especially appreciated by users building high-performance sets with heavy graphics cards.Powerful cooling without limitsThe DS900W is designed for maximum thermal efficiency. Up to 10 120mm fans can be installed inside, as well as CPU (Central Processing Unit, CPU) cooling up to 170mm high, effectively keeping temperatures down even during heavy use. Additional vents and a metal mesh back panel increase airflow and improve cooling performance by up to 15% while reducing noise levels (10% reduction). This allows you to enjoy pleasant, quiet operation, whether you are playing more demanding titles or using advanced graphics programs.Full protection against dustThe entire chassis has been protected from dust - it uses covers that effectively block particles, pollen and other debris from getting inside. This solution keeps the interior clean, which not only extends the life of components, but also makes them easier to maintain.Thoughtful space for expansionInside, there is no shortage of space for large components. In the DS900W you can mount a graphics card of up to 425 mm in length, as well as a heatsink of up to 360 mm on top and 240 mm on the side. The case supports motherboard formats ATX (Advanced Technology eXtended, standard motherboard and computer case size), M-ATX (Micro Advanced Technology eXtended, motherboard and computer case size smaller than ATX) and ITX (Information Technology eXtended, compact motherboard and computer case format). In addition, 7 PCI (Peripheral Component Interconnect, a connector standard for expansion cards, such as graphics or sound cards) slots provide ample opportunity to expand the kit with more expansion cards. Darkflash thinks of the most demanding gamers who expect reliability from their hardware.Easy access to the Type-C portOn the front of the case is a USB Type-C port, which offers fast data transfer (up to 10 Gbps) and convenient access for various electronic devices. This solution makes the case ready for current hardware standards, being always at your fingertips.Functional details and solid finishThe Darkflash DS900W is equipped with anti-vibration trapezoidal feet, which increase the stability of the design and reduce vibrations. Inside you'll find room for two SSDs (Solid State Drive, solid state drive) and two HDDs (Hard Disk Drive, hard disk drive), and the clear interior layout easily accommodates the components you need, while maintaining order and good air circulation.Includedmotherboard screws x18power supply screws x6hard drive screws x9copper post x3 (6 pieces pre-installed)fan coverclamp x5fan screws x12copper spacerHD audio support x2USB cap x3user manual ManufacturerDarkflashModelDS900WHousing typeMidi TowerSide panelTempered glassMotherboard standardATX, ITX, M-ATXPower supply standardATX, bottom mountSlots for internal drives4 (2 x 2.5", 2 x 3.5")Expansion card slots7Max PSU length360 mm on top; 240 mm on the sideMax length of graphics card425 mmMax height of CPU cooler170 mmMax number of fans10Fan mounting optionsTop: 120 mm x3/140 mm x2; Side: 120 mm x3; Rear: 120 mm; Bottom: 120 mm x3Water cooling mounting options-Number of fans installedNo fans includedType of fansNo fans includedButtons and controlsPower, Reset, LEDConnectorsType-C x1, USB3.0 x1, USB2.0 x1, HD AudioMaterial0.5 mm SPCCColorBlackHeight454 mmWidth218 mmDepth434 mm
Volcano Space XL Full Tower Case black Youre investing in a top-tier processor, a powerful graphics card, fast RAM, and a solid motherboard, so why would you hide them from yourself and other household members? The MODECOM Volcano Space XL Full Tower is a case designed so that your computer can finally look truly impressive. The front and side tempered-glass panels create a full visual showcaselike hardware displayed in a glass cabinet. Every detail, every ARGB effect (if you install illuminated fans), and every line of your configuration is visible and highlighted by this majestic chassis. MODECOM Volcano Space XL was designed for those who love personalization and perfect internal cable management, while also needing a spacious Full Tower case. Support for motherboards with reversed connectors allows you to build a modern interior without having to expose cables. Thanks to snap-on panels, you gain quick access to the inside. Installing components, upgrading hardware, and cleaning the interior become even easier. The spacious interior gives you full freedom: large E-ATX boards, robust water cooling (up to 420 mm), long graphics cards, and all the components you need for your gaming setup. With the MODECOM Volcano Space XL, your computer will know no limitsand it will look exactly the way it deserves. If you love technology, need plenty of room for expansion, and want your hardware always within sight, the MODECOM Volcano Space XL Full Tower is made for you. Especially in the Volcano Space XL NF version, which gives you complete freedom to configure cooling according to your preferences, as it comes without pre-installed fans. Because bigger can do more.
Supermicro Chassis Features:- System Level Optimized Solutions- Full Range of Rackmount, Workstation & Tower Chassis - mini-1U, 1U, 2U, 3U & 4U- Up to Platinum Level (95%+) High-Efficiency Power Supplies- High Availability, Adaptability, Scalability and Reliability- Outstanding Price/Performance Ratio- Highest Quality Components, Fans & Power Supplies- 100% Cooling Redundancy for System Reliability- Hot-Swappable Redundant Power Supplies, Fans and Drive Trays- Maximum Storage CapacityThese design advantages have helped Supermicro rapidly establish its reputation as a leader in chassis design. To see the future of chassis designs now, check out our latest chassis solutions. Optimized for the latest x86 processors, these state-of-the-art chassis are equipped with hot-plug heavy-duty fans, fan speed controls and revolutionary air-shroud designs for 100% airflow redundancy.Toetatud protsessorite arv1Toetatud mälutüübidDDR4-SDRAMToetatud kõvaketaste arv7Kujutegur1UToiteallikas200 WKasutamistemperatuur (T-T)0 - 40 °CHoiustamistemperatuur (T-T)-40 - 70 °CSuhteline õhuniiskus kasutamisel (H-H)8 - 90 protsentiSuhteline õhuniiskus (H-H) hoiustamisel5 - 95 protsentiLaius437 mmSügavus249 mmKõrgus43 mmKaal4,5 kg
Dimension: 210 mm x 465 mm x 470 mm Form Factor: Midtower Materials: Powder coated steel chassis Tempered glass side panel Motherboard Support: ATX, Micro ATX, Mini ITX, E-ATX *(up to 272mm wide, cannot use rubber grommets) Front I/O: 2x USB 3.0, Mic, Headphone, Reset, LED control (Digital Versions), 3-speed Fan controller (Non Digital Version)
Tootjakoduleht: http://kolink.eu/Home/case-1/midi-tower-2/observatory-lite.html Mõõtmed: 190 x 440 x 400 mm (L x K x S) Kasti mõõtmed: 258 x 498 x 440 mm (L x K x S) Materjal: Teras, karastatud klaas, plastik Pakend: EPE vaht Kaal: umbes 5,5 kg Värv: must Kujutegur: ATX, Micro-ATX, Mini-ITX Võimalikke fänne kokku: 3x 120 mm (ees) 2x 120 mm (katus) 1x 120 mm (taga) Eelinstallitud: 3x 120 mm (ees) ARGB LED 1x 120 mm (taga) ARGB LED Radiaatori kinnitus: 1x 280 mm (ees) Filter: katus, põhi Sõidupesad: 2x 3,5 / 2,5 "(sisemine) 3x 2,5 "(sisemine) PSU: 1x tavaline ATX (valikuline) Laienduspesad: 7 I / O-paneel: 2x USB 2.0 (sisemine ühendus) 1x USB 3.0 (sisemine ühendus) 1x heli sisse / välja RGB / lähtestamise lüliti GPU maksimaalne pikkus: 335 mm (AIO kasutamisel 310 mm) Maksimaalne protsessori jahuti kõrgus: 160 mm Maksimaalne PSU pikkus: 180 mm
Dimensions: 410x205x440 mm (WxHxD) Material: Steel (case), tempered glass (side panel), plastic (front) Weight: approx. 5,5 kg Colour: Black Form factor: ATX, Micro-ATX, Mini-ITX Total possible fans: 3x 120 mm (front) 1x 120 mm (rear) Radiator Mountings: 1x max. 360 mm (front) 1x 120 mm (rear) Drive Bays: 2x 3,5/2,5“ max. (internal) 2x 2,5“ max. (internal) PSU: 1x Standard ATX (optional) Expansion slots: 7 I/O Panel: 1x USB 3.0 1x USB 2.0 2x 3,5 mm ports (1x Audio-In / -Out) RGB Controller Max GPU length: 310 mm Max CPU cooler height: 160 mm
Kompaktes Mini-ITX-Gehäuse mit USB 3.0, Rahmen aus stabilem Stahl, Platz für 30,9 cm lange Grafikkarten, zwei vorinstallierte Lüfter, zahlreiche Luftdurchlässe für Airflow, herausnehmbare Staubfilter
