GETTING INTO THE GAME. Are you building a gaming computer? Then of course you need your gaming rig to have a sturdy, well-thought-out, well-designed and good-looking case. One with four mounted ARGB fans, an airy front and top, and dust filters. And even better if the side panel was made into a tempered glass door. This is where Case Logic Concept Portos MIDI comes to the rescue. A concrete competitor for gaming tasks to ensure good airflow, component culture, their safety and low temperatures of installed components. Computer case that has everything you need. OPEN YOURSELF TO NEW A side panel made of tempered glass in the form of a hinged door makes it easier not only to install components, but also to keep the computer clean. Just open the door and clean the center with compressed air. Isn't it simple and practical? It's the only one we want to give you, because they simply belong to you. TO HOT COMPONENTS SAY "NO" An airy front and top panel significantly facilitates air circulation. As many as three 120 mm fans on the front and one 120 mm fan on the back Cases effectively cool the heated components. All for your comfort and the safety of your computer. Always willing to play Logic PORTOS ARGB MIDI is a case created to build an efficient and modern gaming PC. Optimal airflow, practical solutions and pre-installed ARGB fans make up its gaming character. READY FOR GAMING COMPONENTS The ability to mount graphics cards up to 340 mm and a maximum CPU cooling height of 155 mm allows the installation of most high-performance components available on the market. PROTECT YOUR COMPUTER FROM DUST THREE DUST FILTERS A dust filter has been placed under the power supply unit. It minimizes the amount of dust sucked in by the PSU's fan, positively affecting its operating temperature and service life. An additional filter is located on top of Cases. This effectively traps unwanted dust and protects the installed components. It protects against dust that enters the computer by gravity throughout the day, even when the computer is turned off. All the effective protection is complemented by mesh mesh on the front panel. OPTIMAL AIR CIRCULATION The ventilated front panel provides airflow with three, efficiently operating 120 mm fans. The back of Cases , on the other hand, features one pre-installed 120 mm fan. This allows you to effectively cool the installed components of the computer's interior, positively influencing the culture of their operation and service life. As an option, it is possible to mount three 140 millimeter fans on the front of Cases (in place of the factory-installed ones) and two 120 or 140 millimeter fans on the top on their own. Case It is also adapted for installation of water cooling. ARGB BEAUTY Case for gamers must look nice. That's why the pre-installed ARGB fans add beauty to the case and the gaming stand. The backlight color can be changed at will from the predefined settings using the RESET button on the control panel Cases. Convenient access to the top panel Convenient access to the top panel, and there are two USB 2.0 and one USB 3.0 connectors, plus one minijack connector for headphones and microphone, a power button and a button to control the fan backlight. SIMPLE INSTALLATION Everything here is well thought out and intuitive. Building a computer in this case is a pleasure and is child's play. POWER SUPPLY A gaming computer must have a good and powerful power supply. That's why we made sure that it has a home here! The maximum length of the power supply with the disk cage installed is 200 mm. A dust filter has been placed under the power supply, which effectively protects the operation of the power supply from dust. 7 PCIe expansion card slots Seven slots for PCIe expansion cards. This is the optimal number for mounting a graphics card and a network card, among others. NEED SPACE FOR GAMES? YOU HAVE IT IN ABUNDANCE! The mounting of HDD or SSD drives is obviously thought out here as well. Inside Cases at tunnel level there is a basket for 3.5" or 2.5" drives. On the motherboard tray, on the other hand, it is possible to mount two additional 2.5" drives. On the motherboard mounting wall, another two 2.5" (with a microATX or ATX motherboard size). A total of 5 SSDs and 1 HDD or 4 SSDs and 2 HDDs can be installed.
The Zalman i3 NEO ATX Mid Tower in white is a versatile and stylish computer case designed to support a wide range of form factors including Midi Tower, Mini ITX, Micro ATX, and ATX. It features a clean white design complemented by four ARGB fans, enhancing both its aesthetics and cooling performance. The case offers ample storage options with 3x 2.5" internal bays and 2x 3.5" bays. For connectivity, it is equipped with a comprehensive I/O panel that includes reset and power buttons, 2x USB 3.0 ports, 1x USB 2.0 port, and ports for a headphone and a microphone. The case measures 422 x 219 x 484 mm and weighs 5.6 kg, making it a compact and manageable option for building a high-performance PC.
INVADER X MINI MID-TOWER CHASSIS INVADER X MINI MINI CASE, MAX VIEW XPG INVADER X MINI, as the most compact PC case in the INVADER X family, offers the opportunity to build your own compact, sleek, and powerful gaming rig. Compatible with ATX motherboards and comes with 5 ARGB fans, INVADER X MINI offers impressive compatibility and captivating lighting displays with optimal airflow.
XPG Invader X BTF. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Understøttede diametre for sideventilatorer: 120 mm, Understøttede diametre for bagerste ventilatorer: 120,140 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 3.5", SSD-formfaktor: 2.5". Bredde: 245 mm, Dybde: 448 mm, Højde: 485 mm. Pakkevægt: 10,2 kg
Prime AP201 Tempered Glass | Max GPU Length 338 mm; PSU Length 140-180 mm | Micro | PSU Not included | Top: 3 x 120 mm; 2 x 140 mm, Rear: 1 x 120 mm, Pre-installed Fans (Rear): 1 x 120 mm | Dimensions 205 x 350 x 460 mm
Eleganter Midi-Tower für Gaming-PCs, mit Front aus Eichenholz, kompatibel mit E-ATX Mainboards, Seitenteil aus Mesh-Fläche, bis zu 7x 120-mm-Lüfter oder 8x 140-mm-Lüfter, bis zu 2x 3,5-Zoll oder 4x 2,5-Zoll-Laufwerke, I/O-Panel mit 1x USB 3.1 Typ C und 2x USB 3.0 Typ A
Midi-tower case, with tempered glass side panel, top and front with mesh, three integrated PWM-ARGB fans, subtle ARGB lighting with integrated control.
Lupus 27 Computer Midi Tower ATX PC Case is a new case from the iBOX brand. This time we get extremely interesting combinations of tempered glass on the side panel of the housing with a front made of a special mesh, under which there are RGB fans. This interesting combination gives the housing a unique look and makes your gaming stand look even better. The case is designed with gamers in mind. The power supply is mounted at the bottom in a special tunnel that separates it from the rest of the case. In addition, the housing is equipped with a set of filters limiting dust access to the interior. It has a USB 3.0 port and two USB 2.0 ports. Three 120mm RGB backlit fans are mounted on the front and one 120mm fan is mounted on the back of the case. The side window is made of tempered glass. This interesting combination of 3 materials (glass, metal and plastic) makes Lupus 27 an extremely interesting proposition.
VALOR AIR PLUS MID-TOWER CHASSIS VALOR AIR PLUS ENDLESS POSSIBILITIES XPG VALOR AIR PLUS mid-tower PC chassis offers a robust platform for future upgrades, accommodating mid-to-high-end components, including most RTX 40 series GPUs. Its high-airflow magnetic front panel enhances visual appeal, especially with ARGB fans, while ensuring superior ventilation. With 4x pre-installed 120mm ARGB fans included in select models, it delivers optimal cooling performance right out of the box.
CG580 4F WH The CG580 4F WH is a picturesque single-chamber case crafted to elegantly display the most commonly used components. Equipped with 4 ARGB fans, support for 360mm radiators, and multiple fan configurations, it combines style with exceptional functionality. The design features a no A-pillar construction, along with glass side and front panels offering a 270°view, allowing builders to fully appreciate their hardware.
Prime AP201 Tempered Glass | Max GPU Length 338 mm; PSU Length 140-180 mm | Micro | PSU Not included | Top: 3 x 120 mm; 2 x 140 mm, Rear: 1 x 120 mm, Pre-installed Fans (Rear): 1 x 120 mm | Dimensions 205 x 350 x 460 mm
Spacious Micro-ATX case in black, for motherboards up to Micro-ATX, tempered glass side panel, up to 11x 120-mm fans possible, 2x radiators up to 360 mm possible, graphics cards up to 400 mm in length, dual-chamber design.
The Lian Li LANCOOL 216 RGB White E-ATX Case is a stylish mid-tower case designed for E-ATX motherboards. It features three radiator mounts for water cooling (1x 240mm / 2x 360mm), a tempered glass side panel, and comes with three pre-installed fans (2x 160mm ARGB / 1x 120mm). It also includes a fan and ARGB hub for easy customization and control.
Vielseitiger und geräumiger Big-Tower, Front- und Seitenteil aus Tempered Glass, mit flexibler Radiator- und hochkantiger Grafikkartenmontage, Platz für 3 Radiatoren bis 420 mm, für bis zu 11 Lüfter, 1x USB 3.1 Typ C / 4x USB 3.0 Typ A am I/O-Panel
H7 Flow RGB Mid-Tower ATX Airflow Case with RGB Fans - The H7 Flow RGB revolutionizes GPU cooling in a classic mid-tower form factor. Its vertical PSU layout allows space for 3 x 120mm bottom fans, offering efficient cooling without expanding the case footprint. - Supports three bottom-mounted 120mm fans for direct GPU cooling while retaining a narrow mid-tower footprint. - Comes equipped with a F360 RGB Core single-frame fan for exceptional out-of-the-box cooling and RGB lighting. - High-performance mesh panels maximize airflow for both intake and exhaust, as well as filter dust. - Supports up to 420mm radiators in the front and 360mm radiators in the top for powerful cooling potential. - Intuitive cable management system with wide channels, built-in hooks, and included straps for easy routing. - Capacity for up to 10 fans in total: 3 up top, 3 in front, 3 on bottom, and 1 in the rear. - Conveniently access 2 x USB-A and 1 x USB-C ports located on the top panel. - Tool-less access to the front, top, and side panels makes building and upgrading a breeze.
MAG PANO 100R PZ / WHITE - Supported ATX and Micro-ATX Back-connect motherboard. - Supports 360 mm radiator on the top, side and bottom - 270-degree panoramic tempered glass. - Pre-installed with 3 x 120 mm ARGB Reverse-blade fan at the side and 1 x 120 mm ARGB fan at the rear. - 1-to-4 ARGB-Fan control board. - Synergize with a compatible MSI motherboard through bridging with a USB 20Gbps Type-C (20Gbps) port for high speed data transmission. - Removable dust filter at the top, side and bottom being easily removed for cleaning. - UNI front panel cable make your DIY process easier and create more possibilities to your system.
XG172 | MidiTower | PSU Not included | Cooling Fan Support (mm): Side:2x 120mm Top:3x120mm / 2x140mm Rear:1 x 120mm Bottom: up to 3 x 120mm | Dimensions 421 x 220 x 490mm
