Versatile midi-tower, front and side panel made of tempered glass, large mesh areas on the left side panel and lid, 2x 140mm & 1x 120mm ARGB PWM fans pre-installed, GPU length of up to 420mm, CPU cooler height up to 175mm
Darkflash DB330M Mesh computer case (white)Darkflash DB330M Mesh is a computer case designed for M-ATX and ITX standard motherboards. Its dimensions (368 × 218 × 400 mm) allow the construction of a compact set-up with a graphics card up to 305 mm long and CPU cooling up to 180 mm high. The design is based on a 0.5 mm SPCC steel frame and features a tempered glass panel and mesh front for efficient air or liquid cooling.Efficient air coolingThe Darkflash DB330M Mesh case supports up to 7 fans: 2 at the front, 2 at the bottom, 2 at the top and one at the rear. The top part of the design allows for the installation of fans in 120 or 140 mm sizes, while the remaining locations are provided for 120 mm fans only. This arrangement allows for the creation of a vertical cooling channel that promotes natural air circulation and efficiently dissipates heat from components.240 mm liquid coolingThe Darkflash DB330M Mesh allows you to mount a water cooler of up to 240 mm in the top. This allows you to install a high-performance AIO system without sacrificing other components. The maximum height of the air cooler is 180 mm.Mesh panel with filterThe front panel of the case is made of mesh, which improves airflow and also acts as a dust filter. Additional vents are also located on the top and bottom of the design.Space for longer GPUsA graphics card up to 305 mm in length can be mounted inside. The chassis offers 4 PCI slots, making it possible to mount two- and three-slot cards. The power supply compartment and cable space do not limit the length of the GPU.Glass side panelThe left panel is made of tempered glass to expose the computer's interior and components with RGB backlighting. The panel can be easily removed without tools.Separate space for cables and multiple portsThe back of the case features a contoured space and pass-through holes for orderly cable routing. This layout makes it easier to install components and improves airflow in the main compartment. The front panel features a USB 3.0 port, 2 USB 2.0 ports, one HD Audio port and a power button. This allows you to enjoy quick access to basic functions without having to reach the back of the case.ATX power supply compatibility and board supportThe bottom of the case has room for a standard ATX power supply. This makes it possible to mount full-power units without the space constraints typical of smaller enclosures. In addition, the Darkflash DB330M Mesh supports M-ATX and ITX motherboards, offering optimal conditions for building a home, office or gaming PC. The lack of pre-installed fans allows for individual selection of cooling components. ManufacturerDarkflashModelDB330M Mesh WhiteHousing typeMidi TowerSide panelTempered glassMotherboard standardM-ATX, ITXPower supply standardAt the bottomSlots for internal drives3.5" HDD x2, 2.5" SSD x1Expansion card slots4Max PSU length210 mmMax length of graphics card305 mmMax height of CPU cooler180 mmMax number of fans7Fan mounting optionsTop: 120 mm x2 / 140 mm x2; Bottom: 120 mm x2; Front: 120 mm x2; Rear: 120 mm x1Water cooling mounting optionsTop: 240 mmNumber of fans installedNo fans installedType of fansNo fans installedButtons and controlsPowerConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorWhiteHeight400 mmWidth218 mmDepth368 mmWeight3.8 kg
ASUS 90DC00M0-B39040. Type: PC, Produktfarve: Sort, Understøttet motherboard, formfaktorer: ATX. Frontventiler installeret: 2x 160 mm, Understøttede diametre for frontventilatorer: 140,160 mm, Bagerste ventilatorer installeret: 1x 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 225 mm, Dybde: 412 mm, Højde: 503 mm
The Phanteks XT M3 impresses with a space-saving design that offers you more than enough room for high-end components. With effective cooling and tidy cable management, this case is suitable for everyone—whether you are a casual gamer or an enthusiast. Compact Size: Space-saving case for high-end hardware Effective Cooling: Space for up to nine fans Large Radiator: Supports installation of a 360 mm radiator on the top panel Organized Build: Space for neat cable management Back-Connect Support: Compatible with motherboards featuring back-connect design The Phanteks XT M3: Sleek mini case for your gaming setup Show off your gaming hardware with the Phanteks XT M3—a compact SFF case designed for greatness. Compatible with high-end graphics cards and motherboards with back-connect design, this tower is ready for your modern setup. Phanteks XT M3 case with fans Effectively cooled with fans and radiator The Phanteks case supports the installation of up to nine fans, keeping your build cool under any workload. You can mount three fans on the bottom, directly below the graphics card, to provide extra cooling for your GPU. A 360-mm radiator can also be mounted on the top if you prefer water cooling. In addition to fans and a radiator, the mesh front panel ensures excellent airflow, reducing heat buildup inside your case. Your new gaming PC with clean cable management Laying out cables neatly is not always easy—but with the Phanteks XT M3, cable management becomes effortless. Cutouts in just the right places allow for tidy cable routing. Combined with support for motherboards with a back-connect design, you get an organized build that not only looks great but also improves airflow. Mini-ITX case built for powerful hardware Even a large graphics card fits in easily—the case provides space for a GPU up to 430 mm long. Note that you cannot install fans at the front if you utilize the full length. The CPU cooler should not exceed 175 mm in height, and the power supply should be no longer than 150 mm.
The Phanteks XT M3 impresses with its space-saving design, offering you more than enough room for high-end components. Thanks to efficient cooling and neat cable management, this case is suitable for everyone—whether you’re a casual gamer or an enthusiast. Compact size: Space-saving case for high-end hardware Effective cooling: Supports up to nine fans Large radiator: Accommodates a 360 mm radiator at the top Clean build: Space for neat cable management Back-connect support: Compatible with motherboards featuring back-connect design The Phanteks XT M3: Sleek mini case for your gaming setup Showcase your gaming hardware with the Phanteks XT M3—a compact SFF case made for big ambitions. Compatible with high-end graphics cards and motherboards with back-connect design, this tower is ready for your modern setup. Phanteks XT M3 Case with fans Efficient cooling with fans and radiator The Phanteks case supports the installation of up to nine fans, ensuring a cool build under any load. Three fans can be mounted at the bottom, directly beneath the graphics card, providing extra cooling specifically for your GPU. Additionally, a 360 mm radiator can be installed at the top if you prefer water cooling. Beyond fans and the radiator, the mesh front panel also provides excellent airflow, preventing hot air from accumulating inside your case. Your new gaming PC with clean cable management Laying out cables neatly can be tricky—but with the Phanteks XT M3, cable management is effortless. Cutouts in the right places allow you to route cables cleanly. Combined with support for motherboards with back-connect design, you'll get a tidy build that not only looks great, but also improves airflow. Mini-ITX case built for high-performance hardware Even a large graphics card is no problem—the case offers space for a GPU up to 430 mm in length. Note that you cannot install front fans if you use the full GPU length. The CPU cooler should not exceed a height of 175 mm, and the power supply should be no longer than 150 mm.
ASUS ROG Strix Helios II. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Frontventiler installeret: 3x 140 mm, Understøttede diametre for frontventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 250 mm, Dybde: 565 mm, Højde: 591 mm
The HYTE X50 is a stylish midi tower case for demanding PC enthusiasts who want to combine design and functionality. With its innovative internal structure and high-quality workmanship, it is aimed at gamers, streamers, and builders who pay attention to detail. Three-chamber layout separates heat sources for optimal airflow Supports up to ten 120 mm RGB fans for massive cooling performance 360 mm radiator support on the top and bottom for powerful water cooling Panoramic glass side panel showcases your setup Magnetic cable management system for clean builds with minimal effort HYTE X50: Innovative cooling concept with clear separation The HYTE X50 uses an intelligent three-chamber design that physically separates GPU, motherboard, and power supply. This creates unobstructed airflow, efficiently removing heat from the case. With the direct flow of fresh air to your graphics card, you can keep it cool even during graphics-intensive games or 3D rendering, continuously supplying it with air. Design meets functionality The case impresses with a curved glass side panel that elegantly highlights your system. The clear, symmetrical design is not only eye-catching but also thoughtfully engineered. Radiators up to 360 mm can be installed at the top and bottom, ensuring even high-end water cooling solutions have enough room. Modular interior and easy assembly Building your system is made extremely easy thanks to thoughtful details such as magnetically sealed cable guides, tool-free front and side panels, and flexible mounts. In addition, the front USB-C port provides ultra-fast access with up to 20 Gbit/s—ideal for modern peripherals and fast data transfers.
Midi tower in black, supports up to eight fans, space for radiators up to 360mm, motherboards up to ATX, GPU up to 405mm, and CPU cooler up to 175mm in height, supports up to three drives The Antec P30 AIR PC case has been specifically designed for premium airflow, ensuring efficient cooling of your components. Thanks to the well-thought-out mesh panels and optimised air circulation, your PC system stays cool and performs reliably even under heavy load. Black mid-tower with built-in fans Effective cooling performance thanks to eight fan slots and radiators up to 360mm Supports motherboards up to ATX size Space for graphics cards up to 405mm and CPU coolers up to 175mm in height Antec P30 AIR: PC case with built-in fans The Antec P30 AIR mid-tower offers the perfect balance between size and functionality. With ample room for powerful hardware and efficient cooling, it is the ideal choice for gaming and workstation builds. Extensive cooling options with fans and radiators To keep your hardware cool under any load, the Antec P30 AIR can accommodate up to eight fans simultaneously. The top supports three 120mm or two 140mm fans. At the front, two 120mm or 140mm fans can be installed, while above the power supply cover there is space for two additional 120mm fans. A 120mm fan can also be mounted at the rear. An AiO water cooling system can also be easily installed if you prefer to cool your powerful hardware with liquid cooling. There is space for this at the top (up to 360mm), at the front (240mm), and at the rear (up to 120mm). Installing your hardware The case offers enough space for powerful gaming hardware. It supports graphics cards up to 405mm in length. Motherboards up to ATX format are supported. The CPU cooler should not exceed a height of 175mm. To store programmes and games, a total of three drives can be installed.
Das ENDORFY Signum M30 ARGB ist ein kompaktes microATX-Gehäuse mit vielseitigen Konfigurationsmöglichkeiten. Das luftige Design mit Mesh-Front, drei vorinstallierten Stratus 120 PWM ARGB-Lüftern und Staubfiltern hilft dabei, stabile Temperaturen zu halten. Das Seitenteil aus gehärtetem Glas sowie der schnelle USB-C-Anschluss unterstreichen den modernen Charakter des Gehäuses. Das Signum M30 ARGB wurde für eine effiziente Kühlung der Komponenten entwickelt. Die vordere Mesh-Front wird von zwei vorinstallierten Lüftern unterstützt, was für einen ungehinderten Luftstrom ins Innere sorgt. Die warme Luft wird durch den hinteren Lüfter sowie den perforierten oberen Bereich des Gehäuses effektiv abgeführt, was stabile Temperaturen im Betrieb unterstützt. Das Gehäuse bietet Platz für bis zu sieben 120-mm-Lüfter. Zwei magnetische Staubfilter sowie die Mesh-Front, die ebenfalls als Staubfilter fungiert, lassen sich werkzeuglos abnehmen und leicht reinigen. Im Lieferumfang des Signum M30 ARGB sind drei werkseitig montierte Stratus 120 PWM ARGB-Lüfter enthalten, die an einen vorinstallierten PWM-Splitter angeschlossen sind. Dadurch reicht ein einzelner 4-Pin-PWM-Anschluss aus, um die Lüfter über das Mainboard zu steuern. Die gemeinsam mit Synergy Cooling entwickelten Lüfter verbinden hohe Leistung mit leisem Betrieb. Das hochwertige FDB-Lager sorgt für eine lange Lebensdauer, während die PWM-Steuerung eine präzise Regelung der Drehzahl ermöglicht – inklusive Fan-Stop-Modus. Das Seitenteil aus gehärtetem Glas verleiht dem Gehäuse ein modernes Erscheinungsbild und setzt die verbauten Komponenten gekonnt in Szene. Der Raum hinter dem Mainboard-Tray sowie sinnvoll platzierte Kabeldurchführungen und Befestigungspunkte für Kabelbinder erleichtern eine saubere Kabelführung. Eine ordentliche Verlegung der Kabel verbessert nicht nur die Optik im Inneren, sondern unterstützt auch einen besseren Luftstrom. Das schlanke Zweikammer-Design wurde für microATX-Mainboards konzipiert und ist zudem mit den kleineren Formaten Mini-ITX und FlexATX kompatibel. Das Signum M30 ARGB bietet Platz für moderne Komponenten, darunter lange Grafikkarten mit bis zu 345 mm Länge, leistungsstarke Kühllösungen wie Luftkühler bis 159 mm Höhe sowie 240-mm-Radiatoren. Zusätzlich lassen sich mehrere Datenträger verbauen:zwei 2,5"- und zwei 3,5"-Laufwerke. Vier Erweiterungsslots mit verschraubbaren Slotblenden erleichtern die individuelle Konfiguration des Systems. Auf der Oberseite des Gehäuses befindet sich ein funktionales I/O-Panel für den schnellen Zugriff auf häufig genutzte Anschlüsse. Zur Verfügung stehen zwei USBA 3.2 Gen 1 Ports, zwei 3,5-mm-Audiobuchsen für Kopfhörer oder Lautsprecher und Mikrofon sowie ein besonders schneller USB-C 3.2 Gen 2×2 Anschluss mit bis zu 20 Gbit/s. So kannst du moderne Geräte und Zubehör bequem anschließen – ganz ohne Adapter. Das Signum M30 ARGB ist mit drei vorinstallierten Lüftern mit adressierbaren LEDs ausgestattet, die das Gehäuse in einer breiten Farbpalette erstrahlen lassen. Der mitgelieferte Controller ermöglicht die Steuerung der Effekte auch ohne kompatibles Mainboard – Modi und Farben werden per Taste gewechselt. Alternativ lässt sich der Controller an ein Mainboard mit 3-Pin-ARGB-Anschluss anschließen, um die Beleuchtung direkt über die entsprechende Software zu steuern.
No. of drive bays: 6 Dimensions: 455 x 205 x 475 mm Weight: 5.27 Other features: - Steel thickness: 0.7 mm- Full side and top panel (no ventilation openings on top)- 2mm thick soundproofing panel on the right, left, top and front panels- 2 x fan on the front + 1 x rear fan
