CTE T500 TG ARGB Snow Full Tower Chassis The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support up to a 420mm AIO radiator at the front and a maximum 360mm AIO radiator at the rear. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for centralized thermal efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE T500 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE T500 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. Experience the perfect combination of design and performance with our CTE T500 The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support a maximum of a 420mm AIO radiator at the front and a maximum of two 360mm AIO radiators at the front and rear. There's plenty of room to install cooling components, including front and rear fan brackets, top and right fan vents, bottom fan vent, and shroud vent, and the case can accommodate up to eleven 140mm/120mm fans. Other cool details include removable filters, pump and tank support, and Velcro straps for easy cable management. Our CTE T500 Snow is the perfect choice whether you're looking for a custom liquid cooling setup or a dual AIO setup! Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE T500 TG ARGB's versatile interior features two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Support for dual 360mm radiators Our CTE T500 TG ARGB Snow offers excellent cooling support for custom liquid cooling enthusiasts, allowing users to install up to two 360mm radiators simultaneously at the front and rear. To ensure AIO compatibility, users can install up to one 420mm AIO radiator on the front and up to two 360mm AIO radiator on the front and rear. All your dream cooling components will fit! The CTE T500 Full Tower case has a huge fan and cooler installation capacity: up to eleven 140 mm/120 mm fans and 360 mm AIO coolers in various locations (420 mm AIO cooler at the front). Moreover, equipped front and rear fan brackets and mounting locations on the top, right side and lid ensure easy installation of all desired cooling components. Rock your world with three pre-installed white 140mm CT140 ARGB fans The CTE T500 TG ARGB Snow Full Tower case is equipped with three white 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance. We've tested everything, so you don't have to At Thermaltake, we always stress test our products under harsh conditions to ensure product quality. CTE T500 TG ARGB Snow Full Tower Chassis products have been tested at 100% full load for 30 minutes, with the highest-end CPU, GPU and motherboard at the time of testing, compared to a consumer-style configuration, which allowed us to test how the chassis handles in real-world situations.
COUGAR | FV270 White | PC Case | Mid tower / Tempered, Curved Glass Perimeter / Quick Detachable Air Filters / Up to 9 Fans (1x120mm RGB Preinstalled) / White
Midi-Tower PC case in ATX form factor, made of steel and plastic, foldable side panel with magnetic closure, front made of fine mesh, GPU support up to 330 mm, suitable for 360 mm radiator
Elegantes und vielseitiges mATX-Gehäuse, geschlossene Front für Silent-Builds, Seitenteil aus Temperglas, bis zu 8 Lüfter und 3 Radiatoren möglich, für GPUs mit max. 400 mm Länge, versetzbares Netzteil für optimale Raumaufteilung
Das AeroCool D301A Mini-Tower-Gehäuse kombiniert ein trendiges Mesh-Design mit Holzakzenten an der Front mit einer robusten SPCC-Konstruktion für Langlebigkeit. Es unterstützt ASUS- und MSI-m-ATX-Motherboards mit rückwärts gerichteten Anschlüssen, Flüssigkeitskühler bis zu 360 mm und GPUs bis zu 410 mm und bietet so ein leistungsstarkes PC-Baupotenzial in kompakter Form. Mit 11 Lüftersteckplätzen für optimale Kühlung, vielseitigen Speicheroptionen und praktischen E/A-Anschlüssen, einschließlich USB Typ C und USB3.0, ist dieses Gehäuse auf Leistung und Benutzerfreundlichkeit ausgelegt.
Zalman P50 DS ATX Case with Tempered Glass and Panoramic View - Black The Zalman P50 DS ATX case in black is the perfect choice for demanding gamers and PC enthusiasts looking for an optimal mix of style and performance. With a large Panoramic View side panel made of tempered glass and a spacious interior, this case offers space for powerful components and showcases them in style. Main features of the Zalman P50 DS case: Panoramic Tempered Glass Side Panel : Allows a clear view of your hardware and gives the system a premium and professional look. Spacious ATX Format : Compatible with ATX, Micro-ATX and Mini-ITX motherboards, ideal for complex and powerful builds. Efficient Cooling : Support for multiple fans and water cooling for maximum heat dissipation and stability under load. Stylish black design : The timeless black blends perfectly into any environment and gives the setup a sophisticated finish. The Zalman P50 DS case is the ideal choice for anyone looking for an ATX case with generous space and elegant presentation. The combination of panoramic view and high-quality tempered glass makes it the perfect basis for high-end PC builds.
Compact white mini-caseUp to five fans and breathable mesh ensure efficient airflowSupports motherboards up to Micro-ATXSpace for graphics cards up to 335 mm and CPU coolers up to 170 mm in heightConvenient carrying handle for transportThe Jonsbo C6 MAX: Portable mini-case with surprisingly ample spaceThe Jonsbo C6 MAX is a mini-case that provides enough space for high-end components despite its small size. Fans and breathable mesh on multiple sides ensure excellent airflow, efficiently cooling your hardware. Additionally, the tower is easy to transport with the practical carrying handle. If you have always wanted to take your gaming PC everywhere, the C6 MAX is worth a look!Efficient cooling with fans and radiatorsGood airflow is especially important in a small tower. Therefore, the C6 MAX can accommodate up to five fans. The top can hold either two 120 mm fans or one 140 mm fan, while the bottom can accommodate two additional 120 mm fans. The rear also supports a 120 mm fan. Together with the mesh on the top and front, this ensures that your hardware remains cool even in performance-intensive games.Space for your high-end hardwareThe mini-tower supports the installation of graphics cards up to 335 mm in size. Motherboards up to the Micro-ATX format are possible.The CPU cooler should not exceed a height of 170 mm, while the power supply can be up to 220 mm. A 2.5-inch or 3.5-inch drive can be installed for storing programs and games. Note that the fans on the bottom cannot be installed if you choose the 3.5-inch drive.
QNAP TS-864EU-RP-8G. Toetatud ketaste tüübid: HDD & SSD, Ketta liides: Jada ATA III, Kõvaketta ühenduse tüüp: Jada ATA II, Jada ATA III. Protsessori perekond: Intel® Celeron®, Protsessori tootja: Intel, Protsessori ...
The Gembird Fornax X550 midi-tower chassis is designed to elevate the gaming experience with its cooling capabilities and modern aesthetics. Featuring three ARGB PWM fans, this chassis ensures efficient airflow while keeping components cool during intense gaming sessions. The windowed side panel allows for a view of the internal setup, perfect for showcasing custom builds. Equipped with front panel connectors featuring USB 3.1 and USB-C ports, the Fornax X550 promotes seamless connectivity for all peripherals and devices. Compliance with ISO 9002 and RoHS standards reflects a commitment to quality and safety in design, making it a reliable choice for gamers and PC builders alike.
Darkflash TH285M computer case (white)The Darkflash TH285M chassis is a sleek, compact design for gamers and PC gamers looking for the perfect balance of aesthetics, functionality and performance. Three glass panels provide full visibility of the interior, while compatibility with M-ATX and ITX motherboards and support for up to six fans and a 360mm radiator make it a great base for high-performance and stylish PC sets. It's an option for those looking for a case that stands out in both looks and capabilities.Transparent design on three sidesThe case is distinguished by as many as three transparent panels made of tempered glass, which allow you to easily view every detail of your setup. The transparent design not only enhances the aesthetics of your components, but also allows you to easily check the status of your components and cooling efficiency. The thumb screw-mounted side panel facilitates quick access to the case's interior. From now on, your workspace will impress with its futuristic design.Compatibility and space for componentsThe Darkflash TH285M supports M-ATX and ITX format motherboards, offering great flexibility when building a kit. The interior is designed to accommodate larger-sized components - the maximum height of the CPU cooler is 160 mm, and the length of a graphics card can reach up to 415 mm. Thanks to five PCI slots, the installation of even extensive graphics cards runs smoothly.Advanced cooling capabilitiesThe TH285M is designed with optimal airflow in mind. It supports up to six 120 mm or two 140 mm fans, as well as 360 mm water cooling. This configuration keeps temperatures low even under intense system load, making this chassis ideal for gamers and developers who require stable operation of their components.Convenient access to portsOn the front panel, you'll find a clear and organized layout of ports, including one USB 3.0 and two USB 2.0 connectors for quick access to transfer data and charge peripherals. This makes connecting accessories and external memory fast and convenient.Ready for expansionThe well-thought-out, spacious interior layout makes it easy to install and later upgrade the kit. The case is equipped with the INF24T Black fan and is compatible with the D21 Black CPU cooling, providing a solid starting point for further system expansion. With easy cable management and plenty of space inside, assembling the computer is a breeze. It's the perfect choice for any gamer, graphic designer, or computer enthusiast. ManufacturerDarkflashModelTH285MHousing typeMidi TowerSide panelTempered glassMotherboard standardITX, M-ATXPower supply standardAt the bottomSlots for internal drives3.5'HDD x2, 2.5'SSD x3Expansion card slots5Max PSU length240 mmMax length of graphics card415 mmMax height of CPU cooler160 mmMax number of fans6Fan mounting optionsRear: 120 mm x1; Side: 120 mm x2/140 mm x2; Bottom: 120 mm x3Water cooling mounting optionsSide 280 mm, 280 mm; Bottom 240 mm, 360 mmNumber of fans installedNo fans installedType of fansNo fans installedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x2, HD AudioMaterial0.7 mm SPCCColorWhiteHeight373 mmWidth285 mmDepth426 mm
Tootekood: D32 PRO WHITEGTIN: 6970620554334Korpused
With the D32 series, Jonsbo targets everyone who wants to build their PC in a space-saving way. The D32 PRO PC case, in contrast to the D32 STD, comes with special and practical features such as back-connect or improved front I/O, aimed at the high-end segment. Elegant and space-saving design for mATX motherboards Seamless cable management with cut-outs for back-connect motherboards Tempered glass side panel ensures a subtle appearance Plenty of room for cooling solutions allows for installation of powerful hardware Three dust filters protect your hardware from troublesome dust particles The Jonsbo D32 PRO White: A space-saving and understated case for high-end hardware Whether it’s a midrange HTPC or a high-end PC, the D32 PRO White from Jonsbo offers comfortable space for different types of builds. This minimalist case can accommodate graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height. In back-connect mode, the maximum CPU cooler height is reduced by just under seven millimeters. This ensures adequate cooling for your hardware even with the compact design of the case. In combination with up to six 120-mm fans, or one 120-mm fan and four 140-mm fans, the fans also provide exceptional airflow inside the case. No cable clutter with back-connect With back-connect motherboards such as ASUS's BTF series, MSI's PROJECT ZERO series, or GIGABYTE's Stealth series, the case in B mode—with about six to seven millimeters of additional space—is almost completely free of visible cable clutter. Since most power and connection cables can be connected on the back of the motherboard, you save on cable management while still keeping your case looking clean. Together with the tempered glass side window, this makes for an especially attractive view of your hardware. Powerful cooling in a small space To ensure that your high-performance hardware stays cool even in this compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120-mm fans for sufficient airflow, a large dual-tower CPU cooler, or even a 240-mm AiO cooler, your hardware will stay cool even under load. Three dust filters at the front, top, and bottom ensure your hardware remains free from dust and dirt. As a result, your temperatures always stay optimal and, among other benefits, the lifespan of your hardware is also extended.
Tootekood: D32 PRO MESH BLACKGTIN: 6970620554341Korpused
With the D32 series, Jonsbo targets everyone who wants to build their system in a space-saving manner. Unlike the D32 STD, the D32 PRO PC case is aimed at the high-end segment with special and practical features such as back-connect and improved front I/O. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for back-connect motherboards Mesh side panel for a subtle appearance Plenty of space for cooling solutions allows the installation of powerful hardware Three dust filters protect your hardware from annoying dust particles The Jonsbo D32 PRO Mesh: Compact and subtle case for high-end hardware Whether midrange HTPC or high-end PC – builds of all types fit comfortably in the D32 PRO Mesh by Jonsbo. The minimalistic case accommodates graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height. In back-connect mode, only the maximum CPU cooler height is reduced by about seven millimeters. Thus, despite the compact design of the case, adequate cooling for your hardware is ensured. Working with up to six 120 mm fans or one 120 mm and four 140 mm fans, airflow inside the case is enormous. No cable clutter with back-connect With back-connect motherboards, such as those from ASUS’s BTF series, MSI’s PROJECT ZERO series, or GIGABYTE’s Stealth series, the case in B-mode, with approximately six to seven millimeters more space, is nearly free from visible cable clutter. Since most power and connection cables can be plugged in at the back of the motherboard, you save on cable management while still maintaining a clean look inside your case. Powerful cooling in a small space To ensure your high-performance hardware is sufficiently cooled in such a compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans providing sufficient airflow, a large dual-tower CPU cooler, or even an installable 240 mm AiO, your hardware stays cool – even under load. Three dust filters at the front, top, and bottom make sure your hardware stays free from dust and dirt. This keeps your temperatures always at an optimal level and also extends the lifespan of your hardware.
Midi tower with airflow optimization, mesh front, compatible up to E-ATX, 195 mm CPU cooler height, radiator support up to 360 mm, SimpliCable cable management & magnetic panels, three pre-installed fans The HAVN BF 360 Flow is ideal for gamers and hardware enthusiasts who demand no compromises: solid cooling performance, smart design, and full compatibility. With aerodynamically optimized airflow, a flexible interior, and clever SimpliCable cable management, this case provides the perfect foundation for your high-end build.Airflow cover for targeted cooling of GPU and CPUThree pre-installed fans: 2x 180 mm & 1x 140 mmCompatible with E-ATX motherboards up to 277 mm wideGPU bracket & 410 mm space – ready for RTX 50 SeriesMagnetic panels & SimpliCable – quick maintenance & clean cable managementHAVN BF 360 FlowHAVN BF 360 Flow: Airflow meets styleThe front features a distinctive ribbed mesh that draws in air precisely and reduces flow loss. An integrated guide with a 135° angle directs fresh airflow straight onto the GPU and CPU – providing maximum cooling without heat buildup. Flexible mounts for fans or radiators are included, supporting both air and water cooling solutions.HAVN BF 360 Flow side viewCooling power for your high-end hardwareUp to six fans can be installed. The three pre-installed fans deliver plenty of fresh air right out of the box. Alternatively, radiators up to 360 mm can be mounted at the front and top. With a CPU cooler height of 195 mm and a spacious interior, there’s ample room for large air coolers or custom water cooling loops. Anti-vibration rubber mounts on every bracket ensure whisper-quiet operation, even at peak performance.HAVN BF 360 Flow rear side viewCompatibility without compromiseThe BF 360 offers enough space for motherboards up to E-ATX (max. 277 mm). There’s a generous 410 mm clearance for graphics cards – perfect for current RTX and Radeon powerhouses.The integrated, adjustable GPU bracket reliably prevents GPU sag. Power supplies up to 200 mm fit in the lower compartment without restriction. Two modular drive trays can accommodate either 2x 2.5-inch or 1x 3.5-inch drives – all vibration-damped for quiet operation.HAVN BF 360 Flow rear motherboard traySimpliCable & magnetic panels – smart & stress-freeWith SimpliCable, you benefit from pre-routed cables, straps, and wide channels for super-fast and tidy cable management. The front and top panels are magnetically attached, with rubberized grips and a practical pull tab – maintenance and upgrades have never been easier.HAVN BF 360 Flow I/O panelModern I/O panel for your setupThe I/O includes a USB 3.2 Gen 2 Type-C, two USB 3.2 Gen 2 Type-A ports, and an HD audio jack – perfect for your peripherals and headsets. With the BF 360, you’re well equipped for the future, whether you’re gaming or working.
Limited hololive edition, panorama glass with Suisei design, vertical GPU with PCIe 4.0 riser, powerful cooling, dual-chamber construction The HYTE Y70 Suisei Edition is a limited showcase case for fans of hololive V-Tuber Suisei and discerning PC enthusiasts. It combines the renowned Y70 design with exclusive Suisei graphics, high-quality materials, and maximum hardware compatibility. Limited Suisei Edition featuring Hoshimachi Suisei design and collector’s value Three-piece panoramic glass wonderfully displays hardware and graphics cards Vertical GPU mounting with PCIe 4.0 riser for a clean look and optimal presentation Dual-chamber interior separates hardware and cables for improved airflow Extensive cooling options for both air and water cooling, suitable even for high-end systems Limited design for hololive fans The Suisei Edition brings detailed character graphics and an elegant midnight blue design to the Y70 case. Gold accents and lettering highlight the nocturnal aesthetic. The panoramic glass makes the case a centerpiece of any desk or setup. Plenty of space for powerful hardware The Y70 supports motherboards up to E-ATX and can accommodate graphics cards up to 422 mm in length. With 4-slot GPU support, there is also room for especially large graphics cards. CPU coolers up to 180 mm and power supplies up to 235 mm fit easily inside the case. Strong cooling and thoughtful design Up to ten fans or multiple 360 mm radiators ensure efficient cooling. The dual-chamber design simplifies cable management and keeps the showcase area neat. Tool-less panels and modular mounts make assembly and maintenance especially convenient.
Limited Metaphor: ReFantazio edition of the Y70, featuring panoramic glass with four character designs, vertical GPU with PCIe 4.0 riser, powerful cooling, and a dual-chamber design The HYTE Y70 Metaphor: ReFantazio Edition is a limited showcase case for fans of Metaphor: ReFantazio and discerning PC enthusiasts. It combines the renowned Y70 design with character artwork of the four protagonists, premium materials, and maximum hardware compatibility. Limited Metaphor: ReFantazio Edition with four character designs Three-piece panoramic glass beautifully displays hardware and graphics card Vertical GPU mounting with PCIe 4.0 riser for a clean look and optimal presentation Dual-chamber interior separates hardware and cables for improved airflow Extensive cooling options for air and water cooling—even for high-end systems Limited design for Metaphor: ReFantazio fans The Metaphor: ReFantazio Edition features detailed character graphics and a subtle burgundy design on the Y70 case. Gold accents and lettering emphasize the elegant appearance. The panoramic glass makes this case a highlight in any desk setup. Ample space for powerful hardware The Y70 supports motherboards up to E-ATX and can accommodate graphics cards up to 422 mm in length. With support for 4-slot GPUs, there’s also room for particularly large graphics cards. CPU coolers up to 180 mm and power supplies up to 235 mm fit easily inside the case. Strong cooling and thoughtful design Support for up to ten fans or multiple 360 mm radiators ensures efficient cooling. The dual-chamber design streamlines cable management and keeps the showcase area tidy. Tool-less panels and modular mounts make assembly and maintenance especially convenient.
The JONSBO TK‑4 Wood is a stylish PC case in a mid-tower format featuring high-quality wood and glass accents, ideal for gaming and high-end systems. It offers generous cooling and modding options with a clear view of the components. Mid-tower design with wood cladding for a unique appearance Supports ATX, mATX, and ITX motherboards for flexible system builds Space for large graphics cards up to 460 mm and CPU coolers up to 175 mm Up to 11 fans and room for two 420 mm radiators Front ports including USB-C and USB 3.0 for fast data transfer Design and Materials The TK‑4 Wood combines a robust steel construction with 4 mm tempered glass and wooden elements for a premium look. The interior is clearly organised to accommodate both air and water cooling solutions while providing a clear view of all components. Showcase your hardware perfectly with the TK-4 Wood. The generous panoramic design with glass front and sides offers an unobstructed view of your components at all times – ideal for eye-catching builds with RGB lighting and custom water cooling. With the wooden front, the case brings warmth and style to your setup. The natural grain provides a unique appearance, while the combination of wood and metal offers a perfect blend of technology and aesthetics. Cooling and Expandability Thanks to support for up to 11 fans and large radiators up to 420 mm, the case is excellently suited for powerful builds with intensive heat dissipation. The thoughtful airflow design ensures stable temperatures even under demanding use. Compatibility and Everyday Use Compatible with ATX, mATX, and ITX motherboards as well as large graphics cards and power supplies, the TK‑4 Wood supports a wide range of builds. The modern front I/O ports, including USB-C and USB 3.0, make everyday use easier.
COUGAR CFV235 Vision is a black ATX Midi Tower case with glass construction and ARGB lighting. It supports graphics cards up to 43 cm long, CPU coolers up to 17.5 cm high, and power supplies up to 20 cm long. The case provides two internal 2.5" drive bays. It supports up to three top fans and includes one 120 mm rear fan. Its dimensions are 235 mm wide, 493 mm high, and 460 mm deep, with a net weight of 10 kg.
The Viewport Mini, in its elegant black version, is a mini-tower case featuring front and side panels made of tempered glass, providing a panoramic view of the high-performance interior components. It supports Micro ATX and Mini-ITX motherboards and offers advanced cooling options with 7 fan slots and liquid cooling compatibility for 240/280 mm and 120 mm radiators. The included ARGB fans draw air in through mesh ventilation to optimize airflow. Ideally suited for gaming and high-performance applications, it accommodates GPUs up to 355 mm and CPU coolers up to 165 mm.