GETTING INTO THE GAME. Are you building a gaming computer? Then of course you need your gaming rig to have a sturdy, well-thought-out, well-designed and good-looking case. One with four mounted ARGB fans, an airy front and top, and dust filters. And even better if the side panel was made into a tempered glass door. This is where Case Logic Concept Portos MIDI comes to the rescue. A concrete competitor for gaming tasks to ensure good airflow, component culture, their safety and low temperatures of installed components. Computer case that has everything you need. OPEN YOURSELF TO NEW A side panel made of tempered glass in the form of a hinged door makes it easier not only to install components, but also to keep the computer clean. Just open the door and clean the center with compressed air. Isn't it simple and practical? It's the only one we want to give you, because they simply belong to you. TO HOT COMPONENTS SAY "NO" An airy front and top panel significantly facilitates air circulation. As many as three 120 mm fans on the front and one 120 mm fan on the back Cases effectively cool the heated components. All for your comfort and the safety of your computer. Always willing to play Logic PORTOS ARGB MIDI is a case created to build an efficient and modern gaming PC. Optimal airflow, practical solutions and pre-installed ARGB fans make up its gaming character. READY FOR GAMING COMPONENTS The ability to mount graphics cards up to 340 mm and a maximum CPU cooling height of 155 mm allows the installation of most high-performance components available on the market. PROTECT YOUR COMPUTER FROM DUST THREE DUST FILTERS A dust filter has been placed under the power supply unit. It minimizes the amount of dust sucked in by the PSU's fan, positively affecting its operating temperature and service life. An additional filter is located on top of Cases. This effectively traps unwanted dust and protects the installed components. It protects against dust that enters the computer by gravity throughout the day, even when the computer is turned off. All the effective protection is complemented by mesh mesh on the front panel. OPTIMAL AIR CIRCULATION The ventilated front panel provides airflow with three, efficiently operating 120 mm fans. The back of Cases , on the other hand, features one pre-installed 120 mm fan. This allows you to effectively cool the installed components of the computer's interior, positively influencing the culture of their operation and service life. As an option, it is possible to mount three 140 millimeter fans on the front of Cases (in place of the factory-installed ones) and two 120 or 140 millimeter fans on the top on their own. Case It is also adapted for installation of water cooling. ARGB BEAUTY Case for gamers must look nice. That's why the pre-installed ARGB fans add beauty to the case and the gaming stand. The backlight color can be changed at will from the predefined settings using the RESET button on the control panel Cases. Convenient access to the top panel Convenient access to the top panel, and there are two USB 2.0 and one USB 3.0 connectors, plus one minijack connector for headphones and microphone, a power button and a button to control the fan backlight. SIMPLE INSTALLATION Everything here is well thought out and intuitive. Building a computer in this case is a pleasure and is child's play. POWER SUPPLY A gaming computer must have a good and powerful power supply. That's why we made sure that it has a home here! The maximum length of the power supply with the disk cage installed is 200 mm. A dust filter has been placed under the power supply, which effectively protects the operation of the power supply from dust. 7 PCIe expansion card slots Seven slots for PCIe expansion cards. This is the optimal number for mounting a graphics card and a network card, among others. NEED SPACE FOR GAMES? YOU HAVE IT IN ABUNDANCE! The mounting of HDD or SSD drives is obviously thought out here as well. Inside Cases at tunnel level there is a basket for 3.5" or 2.5" drives. On the motherboard tray, on the other hand, it is possible to mount two additional 2.5" drives. On the motherboard mounting wall, another two 2.5" (with a microATX or ATX motherboard size). A total of 5 SSDs and 1 HDD or 4 SSDs and 2 HDDs can be installed.
ATX case with 270° glass panel, up to ten fans possible, GPUs up to 420 mm / CPU up to 165 mm height, up to three drives possible, radiator up to 360 mm, 1x USB-C / 2x USB-A
Zalman P50 DS ATX Case with Tempered Glass and Panoramic View - White The Zalman P50 DS ATX case in stylish white offers demanding PC builders and gamers the perfect combination of aesthetics and functionality. With a generous Panoramic View side panel made of tempered glass, this case presents the installed components in a clear and modern design. The spacious interior layout supports a variety of high-performance components and is therefore ideal for complex builds. Main features of the Zalman P50 DS case in white: Panoramic Tempered Glass Side Panel : Provides an unobstructed view of the hardware and gives the system a sleek look. Generous ATX Format : Supports ATX, Micro-ATX and Mini-ITX motherboards, ideal for powerful high-end builds. Optimized cooling performance : Space for multiple fans and water cooling for efficient heat dissipation and stability in intensive applications. Elegant white design : Timeless white that fits into any environment and creates a modern look. The Zalman P50 DS case in white is the ideal choice for PC enthusiasts looking for a high-quality case with an attractive design and high functionality. The combination of Panoramic View and high-quality tempered glass makes it the perfect basis for a stylish and powerful PC build.
With the D32 series, Jonsbo targets anyone looking to build a space-saving setup. The D32 PRO PC case, unlike the D32 STD, is aimed at the high-end segment with special and practical features such as Back-Connect or an improved front I/O.Elegant and space-saving design for mATX motherboardsSeamless cable management with cutouts for back-connect motherboardsMesh side panel creates a discreet appearanceAmple space for cooling solutions allows installation of powerful hardwareThree dust filters protect your hardware from annoying dust particlesThe Jonsbo D32 PRO Mesh: Space-saving and discreet case for high-end hardwareWhether mid-range HTPC or high-end PC – builds of all types can comfortably fit in the D32 PRO Mesh from Jonsbo. In this minimal case, graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height can be accommodated. In back-connect mode, the maximum height of the CPU cooler is reduced by just under seven millimeters.Thus, adequate cooling for your hardware is ensured even with the compact design of the case. Combined with up to six 120-mm fans, or one 120-mm fan and four 140-mm fans, the fans also provide tremendous airflow inside the case.No cable clutter with Back-ConnectWith back-connect motherboards such as the BTF series from ASUS, the PROJECT ZERO series from MSI, or the Stealth series from GIGABYTE, the case in B-mode, with about six to seven millimeters more space required, is virtually free of visible cable clutter.Since most power and connection cables can be attached to the back of the motherboard, you save on cable management and still maintain a clean look inside your case.Powerful cooling in a small spaceTo ensure your high-performance hardware stays properly cooled in the compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120-mm fans for sufficient airflow, a large dual-tower CPU cooler, or even a 240-mm AiO that can be installed, your hardware remains cool even under load.Three dust filters on the front, top, and bottom ensure your hardware stays free from dust and dirt. This way, your temperatures remain at an optimal level and the service life of your hardware is extended.
Micro-ATX case, innovative front-mounted power supply, supports GPUs up to 430mm, space for up to seven 120mm fans, separate radiator chamber, glass panels on the front and side, includes three 120mm reverse fansThe Phanteks XT V3 combines compact design with ample room for modern hardware. With stylish glass panels and powerful cooling, your gaming setup becomes a true showcase. Compact Micro-ATX case: ideal for modern builds Ample space: supports GPUs up to 430mm in length Optimized for cooling: up to seven 120mm fans or a 360mm radiator Compatible: with back-connect motherboards Showcase design: tempered glass panels on the front and side The Phanteks XT V3: Compact Mini Case with Plenty of Space Phanteks XT V3 Case Thanks to its compact form factor, the Phanteks XT V3 can be easily integrated into a wide range of gaming or professional setups—while still providing excellent support for modern hardware. The spacious interior offers room for Mini-ITX and Micro-ATX motherboards and supports back-connect motherboards. Additionally, high-performance graphics cards fit with ease, as the Phanteks XT V3 features four PCIe slots and accommodates GPUs up to 430mm. The rear chamber of the case also impresses with an innovative design for premium hardware. Instead of the usual position, the power supply has been relocated to the top front. This allows the Phanteks XT V3 to support full-sized ATX power supplies, providing even greater compatibility. Powerful Cooling Phanteks XT V3 The Phanteks XT V3 delivers outstanding cooling performance. There are seven mounting points for 120mm fans – three at the top, three at the bottom, and one at the rear – allowing for efficient airflow configurations. Out of the box, three powerful M25-120 reverse DRGB fans are pre-installed at the bottom, ensuring strong cooling. Additionally, the Phanteks XT V3 features a dedicated top chamber for a 360mm radiator. This makes it easy to install a powerful AIO cooler, keeping even high-end CPUs reliably cool during intense gaming sessions. Showcase Case Phanteks XT V3 With the Phanteks XT V3, you can display both your hardware and your building skills. The rear chamber provides plenty of space for cable management along with smart routing options for a clutter-free system. Completing the look are tempered glass panels on the front and side, giving you an unobstructed view of your components from every angle. Comprehensive I/O Panel Phanteks XT V3 The Phanteks XT V3 provides outstanding support for your gaming setup, thanks to the front I/O panel located at the bottom right. Here, you’ll find both a USB Type-A and Type-C port with USB 3.2 Gen 2x2 standard. Additionally, a 3.5mm combo audio jack is available for connecting your gaming headset.
Midi tower with optimized airflow, mesh front, compatible with up to E-ATX, 195 mm CPU cooler height clearance, radiator support up to 360 mm, SimpliCable cable management & magnetic panels The HAVN BF 360 is perfect for gamers and hardware enthusiasts who don’t want to compromise: solid cooling performance, smart design, and full compatibility. With aerodynamically optimized airflow, a flexible interior, and clever SimpliCable cable management, this case provides the perfect foundation for your high-end build.Airflow cover for targeted cooling of GPU and CPUSpace for up to seven fans or two 360mm radiatorsCompatible with E-ATX motherboards up to 277 mm wideGPU bracket & 410 mm space – ready for RTX 50 SeriesMagnetic panels & SimpliCable – quick maintenance & clean cable managementHAVN BF 360HAVN BF 360: Airflow meets styleThe front features a distinctive ribbed mesh that draws air in precisely and reduces flow losses. An integrated guide with a 135° angle directs fresh airflow straight onto the GPU and CPU – for maximum cooling without heat buildup. Flexible mounts for fans or radiators are included, whether you prefer air or water cooling.HAVN BF 360 side viewCooling power for your high-end hardwareThere is room for up to seven fans: 3x front, 3x top, and 1x rear. Alternatively, you can install radiators up to 420 mm at the front. With 195 mm CPU cooler height clearance and a spacious interior, you have plenty of room for large air coolers or custom loops. Anti-vibration rubber mounts on every bracket ensure whisper-quiet operation at maximum performance.HAVN BF 360 rear side viewCompatibility without compromisesThe BF 360 offers enough space for motherboards up to E-ATX (max. 277 mm). There’s a generous 410 mm of room for graphics cards – suitable for current RTX and Radeon powerhouses.The integrated, adjustable GPU bracket reliably prevents GPU sag. Power supplies up to 200 mm fit in the lower compartment without restrictions. Two modular drive trays can hold either 2x 2.5-inch or 1x 3.5-inch drives – naturally vibration-damped for quiet operation.HAVN BF 360 rear motherboard traySimpliCable & magnetic panels – smart & stress-freeSimpliCable provides pre-made cable routes, straps, and wide channels for super-fast and tidy cable management. The front and top panels are magnetically attached, with rubberized grip edges and a practical pull strap – maintenance and upgrades have never been so easy.HAVN BF 360 I/O panelModern I/O panel for your setupThe I/O includes a USB 3.2 Gen 2 Type-C, two USB 3.2 Gen 2 Type-A ports, and an HD audio jack – perfect for your peripherals and headsets. With the BF 360, you’re well equipped for the future, whether for gaming or as a workstation.
Midi tower with optimized airflow, mesh front, compatible with up to E-ATX, 195 mm CPU cooler height, radiator support up to 360 mm, SimpliCable cable management & magnetic panels The HAVN BF 360 is perfect for gamers and hardware enthusiasts who want no compromises: robust cooling performance, smart design, and full compatibility. With aerodynamically optimized airflow, a flexible interior, and innovative SimpliCable cable management, this case provides the perfect foundation for your high-end build.Airflow cover for targeted cooling of GPU and CPUSpace for up to seven fans or two 360 mm radiatorsCompatible with E-ATX motherboards up to 277 mm wideGPU bracket & 410 mm clearance – ready for RTX 50 SeriesMagnetic panels & SimpliCable – quick maintenance & clean cable managementHAVN BF 360HAVN BF 360: Airflow meets styleThe front features a distinctive ribbed mesh that draws in air precisely and reduces flow resistance. An integrated guide with a 135° angle directs fresh airflow straight to the GPU and CPU – for maximum cooling without heat buildup. Flexible mounts for fans or radiators support both air and water cooling solutions.HAVN BF 360 side viewCooling power for your high-end hardwareThe interior accommodates up to seven fans. Alternatively, you can install radiators up to 420 mm at the front. With clearance for CPU coolers up to 195 mm tall and a spacious interior, there is plenty of room for large air coolers or custom water-cooling loops. Anti-vibration rubber mounts on every bracket ensure whisper-quiet operation at peak performance.HAVN BF 360 side rearCompatibility without compromiseThe BF 360 offers ample space for motherboards up to E-ATX (maximum 277 mm wide). It provides a generous 410 mm clearance for graphics cards – perfect for current RTX and Radeon models.The integrated, adjustable GPU bracket reliably prevents GPU sag. Power supplies up to 200 mm fit in the lower compartment without restrictions. Two modular drive trays can accommodate either 2x 2.5-inch or 1x 3.5-inch drives – all vibration-damped for quiet operation.HAVN BF 360 rear motherboard traySimpliCable & magnetic panels – smart & stress-freeWith SimpliCable, you get pre-defined cable routes, straps, and wide channels for super-fast and tidy cable management. The front and top panels are magnetically attached, with rubberized grip edges and a practical pull tab – maintenance and upgrades have never been so effortless.HAVN BF 360 I/O panelModern I/O panel for your setupThe I/O includes a USB 3.2 Gen 2 Type-C port, two USB 3.2 Gen 2 Type-A ports, and an HD audio jack – perfect for your peripherals and headsets. With the BF 360, you’re ready for the future, whether gaming or working.
Mini tower in black, supports up to 7 fans, room for a radiator up to 240mm, motherboards up to mATX, GPU length up to 410mm, and CPU cooler height up to 171mm, accommodates up to two drives, with a display at the bottom of the front panel The Jonsbo D200 mini case offers you maximum performance in minimal space. Thanks to its compact design, it fits easily on any desk or in your living room without compromising hardware compatibility. Perfect for anyone looking for a powerful gaming PC in a space-saving format. Black mini tower with panoramic design Effective cooling performance with support for seven fans and radiator up to 240mm Supports motherboards up to mATX Space for graphics cards up to 410mm and CPU coolers up to 171mm in height Small front display to show CPU system data Jonsbo D200: Compact mini tower with tempered glass sides and front The Jonsbo D200 is a mini tower that, despite its small size, offers enough space for powerful hardware. Whether high-end graphics cards or an AiO water cooling system—the possibilities are extensive. Extensive cooling options with fans and radiators To keep your hardware cool under any load, the Jonsbo D200 can accommodate up to seven fans simultaneously. The top supports three 120mm or two 140mm fans. Three 120mm fans can be installed on the power supply cover, while one additional 120mm fan can be fitted at the rear. An AiO water cooling system can also be installed if you prefer water cooling for your powerful hardware. There is space at the top for a radiator up to 240mm. Hardware installation The case offers plenty of space for powerful gaming hardware. It supports the installation of large graphics cards up to 410mm, allowing even the latest high-end GPUs from the RTX 5000 series to be installed. Motherboards up to mATX format are supported. The CPU cooler should not exceed a height of 171mm. For storage, up to two drives can be installed. CPU display on the front The built-in display in the Jonsbo D200 always shows you the current temperature of your CPU—for maximum control.
Tööriistavaba paigaldus ja hooldus; Toetab kuni kahte 360 mm radiaatorit ja 10 ventilaatori pesa; Toetab kuni 425 mm pikkuseid graafikakaarte; Eemaldatavad tolmufiltrid muudavad puhastamise lihtsamaks; USB 3.2 Gen 2x2 C-tüüpi port