With a 270° panoramic view through seamless tempered glass panels on the front and side surfaces, the Lucid 05 impressively presents your components from almost every angle. The Lucid 05 has a total of 11 fan mounts, ensuring effective air circulation not only for the CPU and GPU, but also for the system and storage drives. The top compartment supports a 360mm water cooling radiator for efficient heat dissipation in high performance systems. With the recent introduction of the RTX 50 series, the Lucid 05 has been designed to support graphics cards up to 410mm in length. Tower case type Color black EAN 4710679818986 Manufacturer no. SST-LD05-B-ARG Midi tower design Motherboard form factor ATX Material steel, plastic, tempered glass Window Kit Yes Internal dimensions plug-in card length CPU cooler height Power supply form factor Power supply length 3.5 inch drive bays 2.5 inches Slots full size Front connections 2x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 2.0 (480 Mbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. Front 2 x 80 mm fans can be installed Rear 1 x 120mm ARGB fan pre-installed Notes Integrated 8+8 port ARGB/PWM hub, power supply cover cover: 3 x 120 mm fans can be installed, motherboard compartment: 2 x 120 mm ARGB reverse fans pre-installed, cover: 3 x 120 mm fans can be installed, alternatively 2 x 120 mm fans can be installed Water cooling possible Yes Supported radiators Rear connection of the mainboard No Note When installing two 2.5" SSDs in this position, ensure that the connectors face backwards to avoid interference.[When mounting a 360mm radiator in this position, ensure that the inlet and outlet pipes face forward to avoid interference.[When mounting a 240mm radiator in this position, the distance to the graphics card is 281mm (inclusive). power connectors). Make sure to install the fans between the radiator and the motherboard tray to accommodate this limitation. Volume 46 l Dimensions Width: 22 cm x Height: 49.15 cm x Depth/Length: 42.76 cm
The TR300 WS Mid-Tower Case is an ATX chassis with a front-mounted power supply for optimal space utilization, and supports AIO liquid coolers up to 360 mm for maximum cooling performance. It accommodates up to eight 120 mm fans and supports a radiator up to 360 mm on the top, offering flexible cooling solutions. The case supports Mini-ITX, Micro-ATX, and ATX motherboards; the power supply can be installed at four mounting points within the case, depending on the motherboard size. Maximize the visual effects of your TR300 WS Mid-Tower Case with an upgrade to our LCD screen kit. The 6-inch LCD display allows real-time monitoring and the upload of custom images or GIFs, adding extra flair with the latest TT RGB Plus software. Removable dust filters help keep your system clean while maintaining optimal airflow. For maximum storage compatibility, the case supports up to two 3.5-inch HDDs and three 2.5-inch SSDs for flexible installation.
Zestaw ekranu LCD Thermaltake to ekskluzywne akcesorium rozszerzające do obudowy Tower 300 i Ceres 330 Hydrangea Blue. Dzięki wyświetlaczowi LCD użytkownicy mogą uzyskać pełną kontrolę nad monitorowaniem wydajności i indywidualnymi efektami za pomocą oprogramowania TT RGB Plus 2.0. Ponadto zestaw ekranu LCD 3,9 cala można łączyć z innymi produktami z serii Thermaltake Ultra, aby zapewnić wyjątkowe wrażenia z korzystania z wyświetlacza LCD. Typ panelu bocznego Kolor czarny EAN 4711475642386 Nr producenta AC-073-OO1NAN-A1 Pasuje do obudowy The Tower 300 / Ceres 330 Hydrangea Blue Interfejs funkcji: Micro USB na Micro USB (9 pinów), Zgodność systemu: Windows 10/11 Wymiary Szerokość: 120,5 mm x Wysokość: 44 mm x Głębokość/Długość: 18 mm
The NZXT H6 RGB+ (2026) in the elegant all-black version combines modern design, powerful cooling and impressive RGB lighting in a case that was specially developed for demanding gamers and PC enthusiasts. The striking panoramic glass front with seamless corner glazing offers an impressive view of the installed hardware and makes every system a visual highlight on the desk. Thanks to the innovative dual-chamber layout, the power supply, drives and cables are neatly separated from the main system. This not only ensures a tidy look, but also improves the airflow within the case. The angled front fans direct fresh air specifically to the most important components and ensure efficient cooling of the processor and graphics card, even under high load. The H6 RGB+ is equipped with powerful RGB fans ex works, which ensure an optimal balance of cooling performance and impressive lighting effects. The integrated RGB control enables easy synchronization of the lighting and creates individual color accents that perfectly match your own setup. Generous mesh areas and support for numerous additional fans and large water cooling radiators offer maximum flexibility for powerful gaming and high-end systems. With support for ATX, Micro-ATX and Mini-ITX motherboards as well as enough space for modern high-end graphics cards and powerful CPU coolers, the case is ideal for current and future hardware generations. Thoughtful details such as side panels that can be removed without tools, an integrated cable management system and a GPU support make assembly easier and ensure a professional appearance. Tower case type Color white EAN 5056547209364 Manufacturer no. CC-H62FW-P1 H6 series Midi tower design Motherboard form factor ATX Material steel, tempered glass Window Kit Yes Mesh front Yes Internal dimensions plug-in card length maximum 390 mm Internal dimensions CPU cooler height maximum 165 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 200 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Slots full size 7 pieces Slots Slots Tool-free Yes Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Rear 1 x F120mm RGB fan pre-installed Notes Cable management: 90 mm, Nylon dust filter: Bottom, Front Right: 1 x F360 mm RGB reverse fan pre-installed, Top: 3 x 120 mm fans can be installed, 2 x 140 mm fans can be installed, Bottom: 1 x F360 mm RGB reverse fan pre-installed Lighting Yes, RGB Water cooling possible Yes Water cooling possible Supported radiators Top: 360 mm (up to 400 mm), back: 120 mm Rear connection of the motherboard Yes Further information The H6 RGB+ comes with pre-installed RGB fans and Control Hub Lite. Accessories included User manual, mounting accessories, Control Hub Lite, 2 x F360 RGB reverse fans, 1 x F120 RGB fan Volume 55 l Dimensions Width: 29.2 cm x Height: 44.8 cm x Depth/Length: 42 cm Weight 9.3kg
The FSP U660 is a powerful server and workstation case for professional systems with high storage and performance requirements. It was developed specifically for users who want to combine extensive storage capacity, powerful hardware and flexible configuration options in one housing. With space for up to 18 3.5-inch hard drives and additional mounting options for 2.5-inch SSDs, the U660 is ideal for storage servers, backup systems, high-performance workstations and data-intensive applications. The generously sized housing supports motherboards in EEB, E-ATX, ATX, Micro-ATX and Mini-ITX formats and thus offers a high level of flexibility when selecting components. Up to 420 mm of space is available for powerful graphics cards, while CPU coolers can reach a maximum height of 180 mm. With nine expansion slots and the option of vertically mounting a graphics card, the system can be individually adapted to different requirements. The FSP U660 also offers extensive cooling options. In addition to numerous positions for case fans, the case supports radiators up to 360 mm in size. This makes it also suitable for powerful processors and systems that operate under high continuous load. The well-thought-out interior design supports efficient airflow and makes it easier to build powerful hardware. The U660 combines its high storage capacity with a robust construction made of 0.8 mm thick SPCC steel. With dimensions of 450 × 258 × 568 mm and a weight of around 11.6 kg, the case offers enough space for extensive hardware configurations, but remains comparatively compact for a case of this configuration. Two USB 3.0 ports and one USB Type-C port are available on the front for modern peripheral devices. The U660 combines its high storage capacity with a robust construction made of 0.8 mm thick SPCC steel. With dimensions of 450 × 258 × 568 mm and a weight of around 11.6 kg, the case offers enough space for extensive hardware configurations, but remains comparatively compact for a case of this configuration. Two USB 3.0 ports and one USB Type-C port are available on the front for modern peripheral devices. Whether as a powerful storage server, backup system, media workstation or basis for sophisticated AI and rendering applications - the FSP U660 offers a versatile basis for professional systems. Big tower case type Color black EAN 4711498482594 Manufacturer no. POC0000310 Server tower design Mainboard form factor E-ATX, SSI-CEB, SSI-EEB Material 0.8mm SPCC Internal dimensions plug-in card length maximum 420 mm Internal dimensions CPU cooler height maximum 180 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 230 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Drive bays 2.5 in 3.5 inches internal Slots full size 9 pieces Front ports 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. Front 4 x 120 mm fans can be installed, alternatively 3 x 140 mm fans can be installed Rear 1 x 120 mm fan can be installed, alternatively 1 x 140 mm fan can be installed Notes Vertical mounting of a graphics card possible, side: 4 x 120 mm fans can be installed, alternatively 3 x 140 mm fans can be installed, bottom: 3 x 120 mm fans can be installed, 3 x 120 mm fans can be installed, alternatively 3 x 140 mm fans can be installed Water cooling possible. Supported radiators top: 360 mm Rear connection of the mainboard No Volume 66 l Dimensions Width: 25.8 cm x Height: 56.8 cm x Depth/Length: 45 cm Weight 11.6kg
The SilverStone SST-RM45-360 is a 4U rackmount server chassis with enhanced liquid cooling compatibility. The chassis supports motherboards up to the SSI-EEB standard, 360 mm water cooling radiators, and 8 PCI expansion slots. The chassis features a USB Type-C interface and adaptability for upright or horizontal placement. Type Rack Enclosure Color black EAN 4710679818191 Manufacturer No. SST-RM45-360 Server tower design Mainboard form factor E-ATX, SSI-CEB, SSI-EEB Material steel, 1.0mm ~ 1.2mm Internal dimensions Plug-in card length maximum 340 mm Supported radiators front: 120/240/360 mm. 3.5 inch internal drive bays 8 pieces Slots Full-Size 8 pieces Front ports 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 1 (5 Gbit/s) 3 x 120 mm fans can be installed on the front Rear 2 x 80 mm fans included Notes LED indicators: Power LED x 1: Blue, HDD access x 1: Green, LAN LED x 2: Green. Water cooling possible Yes Rear connection of the mainboard No Additional Information: An internal USB 3 Type-C cable with a total length of 80 cm is included. When connecting external storage devices, it is advisable to avoid using cables that are too long, as excessive cable length may potentially result in a reduction in transfer speed. Note: The total length of 5.25-inch devices and the motherboard is 481 mm. Refer to the manual for a detailed description of the various form factor tolerances of the motherboard if 5.25-inch devices are to be installed within this limitation. Accessories available Accessory box Volume 39 l Dimensions Width: 43.8 cm x Height: 17.6 cm x Depth/Length: 50 cm Weight 10.4 kg
The SilverStone RM4A 4U Rackmount Chassis sets new standards in flexibility for workstation and server configurations, offering support for everything from compact Mini-ITX boards to full-size SSI-EEB motherboards. With eight full-height expansion slots and a removable expansion card bracket, it's built to easily accommodate high-performance components - no sagging, no strain, just solid support for multi-GPU setups or demanding expansion needs. Excellent temperature control is the strength of the RM4A. The front panel offers space for a 360 mm radiator, enabling the use of highly efficient liquid cooling systems for CPUs or GPUs. Complemented by two 80 mm fans on the back, the case offers a consistent airflow to all important components, ensuring reliable cooling even under continuous load. Rack type, server enclosure Color black EAN 4710679819501 Manufacturer no. SST-RM4A Made in China Rack design Mainboard form factor ATX, E-ATX, µATX, Mini-ITX, SSI-CEB, SSI-EEB Material steel Internal dimensions Plug-in card length maximum 424 mm Internal dimensions CPU cooler height maximum 148 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 255 mm Internal dimensions height units 4 U Drive bays 3.5 inches internal Drive bays 2.5 inches internal Drive bays 2.5 in 3.5 inches internal Slots full size 8 pieces Front ports 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 2.0 (480 Mbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. Front 3 x 120 mm fans can be installed, or a 360 mm radiator 2 x 80 mm fans can be installed on the back Water cooling possible Yes Water cooling possible. Supported radiators front: 360 mm Rear connection of the mainboard No Volume 35 l Dimensions Width: 44 cm x Height: 17.6 cm x Depth/Length: 44.6 cm Weight 7.6kg
Internal 4x 2.5 ", 3x 3.5" (cross, hard drive cage), Front I / O 2x USB-A 3.0, 1x headphone / microphone, PCI slots 4, Fan (front) 1x 120mm or 3x 120mm (optional) or 2x 140mm (optional), Fan (rear) 1x 120mm, Fan (top) 2x 140mm (optional), Radiator sizes 120/140/240 / 280mm front, 120 / 240mm top, 120mm rear, Mainboard to μATX, Supported Motherboards Mini-ITX (6.7 "x6.7") / μATX (9.6 "x9.6"), Power supply ATX (max 325mm deep without front radiator and without HDD cage), Power supply position below, CPU cooler up to max. 166mm height Graphic cards up to max. 346mm, Color black, inside black, Dimensions (WxHxD) 210x411x411mm, volume 35.47l, weight 5.72kg, Special features Cable management, dust filter, glass viewing window, MCB-NR400-KGNN-S00
Tootekood: SAVIO Prime X1GTIN: 5901986046318Korpused
No. of drive bays: 4 Dimensions: Product dimension: (L x W x H) 407 x 215 x 455 mm Weight: 6.09 Other features: PCI expension slots: 7 Dust filter: 1 x top, 1 x bottom(PSU) Fans control by: Motherboardremote controllerLED buttonVoice control/ Fans included: 4 x 120 mm ARGB, 6 pin, 1200 RPM (3 x front, 1 x rear) connected to the controller Fan support: front: 3 x 120/140 mm lub 2 x 200 mm rear: 1 x 120 mm top: 2 x 120 (140) mm bottom: 2 x 120 mm Watercooling support: front: 1 x 120/240/360 mm rear: 1 x 120 mm top: 1 x 120/240 mm Product dimension: (L x W x H) 407 x 215 x 455 mm Chassis material: SPCC 0.6 mm Front Panel material: Tempered glass Net/gross weight: 6.09 / 7.14 kg
Unique Design & Powerful Heat Dissipation The AX90 features a unique mesh front panel design and excellent cooling performance. The full-view tempered glass side panel design allows you to show off your gaming configurations without any obstacles. 11 x 120mm fans can be installed simultaneously.
MAG FORGE 112R TAKE THE BATTLEFIELD The MAG Series hardware, computers and components were born out of rigorous quality testing and are designed to stand for strength and durability. Our designers have focused on making the hardware as user-friendly as possible, so the MAG series products feature a simple installation process that, combined with a user-friendly interface, makes them the best choice for first-time gamers. ARGB LIGHT SHOW Create your own ARGB battle station with the MAG FORGE 110 series chassis, which is fully compatible with MSI Mystic Light technology. OPTIMISED AIRFLOW The MAG FORGE 110 series cases are optimised for, large and efficient airflow to cool the system. The MAG FORGE 110 series allows for the installation of up to 6 fans. Insta-Light Loop Button Quickly control the colours of the fan backlighting, the colours of the LED strip on the front panel of the case and the light animation effects with just one Insta-Light Loop button. Now you can easily browse through the profiles and choose your favourite case illumination. MAGNETIC DUST FILTER There is a magnetically mounted filter on the top vents to prevent dust from getting inside the case, yet it can be easily removed for cleaning. TOOL-FREE FASTENING SIDE PANEL The light grey shade of the 4mm side panel, made of tempered glass, is ideal for displaying RGB light effects. At the same time, it provides a very good view of the components inside the PC. The well-thought-out design of the MAG FORGE 112R case allows users to install and remove the tempered glass side panel very easily and safely. Simply place the side panel into the corresponding groove of the case base before installing it.
This is proof that the unique appearance of a computer case can go hand in hand with excellent air circulation and capacity useful when creating your own hardware configuration. Krux Vako White RGB is a white version of the legendary Vako housing without even the slightest compromise. Arctic cold inside Excellent airflow in the white Vako is ensured by three efficient, factory-installed RGB fans. They help maintain a low temperature of components, and thus promote quieter operation. Two 140 mm front fans draw cool air into the case, while one with a diameter of 120 mm exhausts it from the back. Snow Queen What undeniably distinguishes Krux Vako White RGB from other housings is its crystal white color. Such a white tower will be a great culmination of an aesthetic streaming setup, or it will better fit into the bright decor of the room. No matter how you use it, it will always soothe your eye with its cool whiteness. Aurora in the fan White is not the only visual advantage of this housing. Pre-installed zone-illuminated RGB fans enhance the appearance of both the external panels and the components inside. Their power supply and backlight are connected with 3-pin plugs, which facilitates compatibility with the power supply. Look inside Like through a crystal ball, you can look through the tempered glass side panel into the Krux Vako White RGB case and admire the beauty of your setup. Moreover, this panel is mounted on magnetic latches. Disassembly and reassembly become very simple, so you don't have to worry about scratches and breaks. Space and accessibility Krux Vako White RGB has great capacity for its size. It can accommodate an ATX motherboard up to 240 mm AIO, and next to it there can be a graphics card up to 310 mm long. There are also four places for drives, and on the floor there is space for a power supply up to 160 mm. The external, upper panel of the housing gives access to three USB ports (including one in the 3.0 standard) and the most necessary audio ports. Krux Vako White RGB - main features: Aesthetic, white casing color Two 140 mm fans behind the front panel and one 120 mm fan with back of the housing Zone RGB lighting Roomy interior Design that ensures good air circulation
Tootekood: U4 PRO MESH WHITEGTIN: 6970620553047Korpused
Edler Midi-Tower von Jonsbo in Weiß, dezentes Design aus Stahl, mit Seitenteil mit Mesh, Grafikkarten bis 330 mm, bis zu 5x 120-mm-Lüfter möglich, Mainboards bis ATX
Obudowa do konstruowania wydajnych komputerów mid tower iCUE LINK 5000T LX RGB Przyciągnij uwagę za pomocą wyjątkowej profilowanej konstrukcji obudowy CORSAIR 5000T LX RGB, w której możesz zbudować idealny system oparty na płycie głównej z odwróconymi złączami. Elegancka stalowa obudowa o wyjątkowym kształcie 3 wentylatory LX120 RGB i koncentrator systemowy iCUE LINK w komplecie Zintegrowane taśmy świetlne RGB Aurora zapewniające rozproszone oświetlenie Działa z płytami głównymi z odwróconymi złączami Zdejmowane panele przedni i górny z siateczki umożliwiające intensywny obieg powietrza Mieści do 10 wentylatorów 120 mm lub 4 wentylatorów 140 mm oraz kilka radiatorów 360 mm System organizacji okablowania RapidRoute EFEKTOWNE LINIETa elegancka obudowa o wyjątkowym kształcie z taśmami świetlnymi iCUE LINK Aurora i wentylatorami iCUE LINK LX120 RGB zapewnia wyraziste i dynamiczne podświetlenie pozwalające podziwiać jej uderzające piękno. OGROMNY POTENCJAŁ CHŁODZENIAPrzestronne wnętrze pomieści nawet 10 wentylatorów 120 mm albo 4 wentylatory 140 mm, a także kilka radiatorów o wysokości 60 mm, w tym z przodu lub boku - o rozmiarze 360 mm oraz w górnej części - o rozmiarze 360 mm w konfiguracji push/pull. PEŁNA FUNKCJONALNOŚĆTa obudowa ma wszystko, czego potrzeba do budowy bardzo wydajnego komputera. ZDEJMOWANE PANELE PRZEDNI I GÓRNYSiateczkowe panele o wyjątkowej konstrukcji, które można łatwo zdjąć, aby dostać się do środka, umożliwiają intensywny przepływ powietrza. DWA OBSŁUGIWANE BEZNARZĘDZIOWO PANELE BOCZNE NA ZAWIASACHŁatwy dostęp do systemu dzięki panelom na zawiasach: jednemu ze szkła hartowanego, eksponującemu wszystkie komponenty, oraz jednemu ze stali z drugiej strony. SYSTEM PROWADZENIA PRZEWODÓW CORSAIR RAPIDROUTEUmożliwia szybkie i łatwe poprowadzenie przewodów przez obszerny 46-milimetrowy ukryty kanał pod płytą główną. OBSŁUGA PŁYT GŁÓWNYCH Z ODWROTNYMI ZŁĄCZAMISprawdzona pod kątem zgodności z płytami głównymi ASUS BTF, MSI Project Zero oraz Gigabyte Project Stealth, które mają złącza z tyłu, dzięki czemu nie psują widoku przez podłączone kable. PROSTA KONSTRUKCJANowoczesna konstrukcja w popularnym formacie obudowy komputerowej 5000T ma wygodne rozwiązania, które ułatwią Ci pracę. PUDEŁKO NA ŚRUBY WIELOKROTNEGO UŻYTKUDzięki dodanemu w zestawie pudełku, w którym wszystkie potrzebne Ci śruby będą bezpiecznie zamknięte, nie zgubisz już żadnej ważnej śrubki. PRZELOTKI FORMOWANE W DWÓCH CYKLACHDzięki miękkim, gumowym przelotkom wewnętrznym umożliwiającym łatwe przeciąganie kabli oraz twardym gumowym przelotkom zewnętrznym, które pewnie trzymają się na miejscu, możesz uniknąć frustracji podczas instalowania przewodów. ŚRUBY QUICKTURN DO WENTYLATORÓWŚruby do wentylatorów CORSAIR QuikTurn są równie wytrzymałe i bezpieczne jak tradycyjne śruby, dzięki czemu montaż wentylatorów w systemie staje się niezwykle prosty. Przydaje się to, gdy wypełniasz obudowę tej wielkości. WIELE MOŻLIWOŚCI CHŁODZENIAStwórz odpowiedni do swoich potrzeb system chłodzenia dzięki miejscu na 10 wentylatorów 120 mm oraz różnorodnym opcjom montażu dwóch radiatorów o maksymalnym rozmiarze 360 mm. NOWOCZESNY PANEL WEJŚĆ/WYJŚĆ Z PRZODUUmożliwia łatwy dostęp do nowoczesnych złączy, w tym do portu USB 3.2 Gen 2 Type-C, 4 portów USB 3.2 Gen 1 Type-A oraz zintegrowanego gniazda audio i mikrofonowego typu jack.
HP Serial Port Flex IO v3. Hostiliides: Jada. Päritoluriik: Hiina. Laius: 41,8 mm, Sügavus: 39 mm, Kõrgus: 16,5 mm. Ühilduvus: HP EliteDesk 8 Tower G1i Desktop AI PC; HP EliteDesk 8 SFF G1i Desktop AI PC; HP EliteDesk 8 Mini...
With the Icy Dock ToughArmor MB852M2PO-B, you can replace the old slim CD/DVD drive bay with 2x high-speed M.2 NVMe SSDs. It fits into the 9.5 mm ultra-slim internal mounting bay for optical drives (ODD) and features removable M.2 trays for quick access and effortless maintenance. It is a perfect storage solution for custom industrial PCs, rackmount servers, and embedded systems.TypeHot-swap frameColorblackEAN4713227445320Manufacturer No.MB852M2PO-BIntended useHot-swap frameUseDrive frameSuitable forSSD sizes: 2x M.2 PCIe NVMe SSD (2230/2242/2260/2280/22110)MaterialMetal, partly ABS plasticInstalled drives2x M.2Required mounting bays1x 5.25-inch slimExternal connections2x SFF-8612Internal connectionsM2Further information1x 15-pin SATA power connectorAccessories includedManual, screwsDimensionsWidth: 128.1 mm x Height: 9.5 mm x Depth/Length: 159.3 mmWeight263 g
Cooler Master Elite 502 Lite computer case (black).The Elite 502 Lite is a premium chassis designed for enthusiasts who want top performance and excellent temperature control. The advanced full mesh front panel guarantees maximum airflow, which helps maintain the ideal climate inside the case even under extreme load. The design is able to accommodate radiators up to 420 mm, powerful graphics cards up to 410 mm in length and back-connector motherboards, which translates into a minimalist look and easier, faster component installation.Thoughtful cable managementThe Elite 502 Lite focuses on order and ergonomics - back-connector motherboard support frees up front space, giving the interior a modern and neat look. With 33-35 mm of space behind the motherboard tray, cable management is intuitive, aesthetically pleasing and allows for perfectly organized components.Professional temperature controlThe case already offers a 120 mm rear fan as standard, which takes care of stable airflow from the very first launch. With the ability to install as many as seven additional 120 mm fans or configurations with three 140 mm fans at the front and three at the top, as well as powerful heatsinks - up to 420 mm at the front and 360 mm at the top - the Elite 502 Lite easily stands up to the most advanced cooling systems, whether air or water.Space for future upgradesThe Elite 502 Lite's design was created with the future in mind. The case will accommodate graphics cards up to 410 mm in length, CPU coolers up to 170 mm, and power supplies up to 210 mm in length (after removing the HDD cage). This is the ideal solution for those planning to expand their computer set-up - without any compromises or space limitations.New generation I/O panelThe top of the case features an I/O panel with a USB 3.2 Gen1 Type-C port, a USB 3.2 Gen1 Type-A port and a universal 3.5mm audio jack. Such a solution guarantees instant connection of modern accessories, convenient data transfer and seamless communication with peripherals.Modularity and purityThe Elite 502 Lite offers a fully removable HDD cage for easy installation and further expansion of the computer. Integrated dust filters located on the top, front and bottom of the case effectively protect the interior from debris, extending the life of components and keeping them in impeccable condition. The sturdy steel construction and tempered glass (TG) side panel emphasize the exclusive character of the case and allow you to fully display your components.Includedcomputer casepre-installed rear fandust filters (top, front, bottom)removable HDD cageset of mounting screwsuser manual ManufacturerCooler MasterModelElite 502 LiteDimensions474 × 230 × 481 mm (with protrusions), 465 × 230 × 465 mm (without protrusions)Capacity49,73 LSupported motherboard formatsITX, Micro-ATX, ATX (with back-connector support), E-ATX (up to 30.5 × 27.7 cm, may limit cable management)Expansion slots73.5" bays22.5" bays2 (max. 6)I/O panel1× USB 3.2 Gen1 Type-A, 1× USB 3.2 Gen1 Type-C, 1× 3.5mm audio comboFan support (front)3× 120 mm or 3× 140 mmFan support (top)3× 120 mm or 3× 140 mmFan support (rear)1× 120 mmPre-installed fans1× 120 mm (rear)Radiator support (front)120 / 140 / 240 / 280 / 360 / 420 mm (limit: 457×140×27 mm)Support for radiators (top)120 / 140 / 240 / 280 / 360 mmSupport for radiators (rear)120 mmMaximum height of CPU cooler170 mmPSU length170 mm, 210 mm (without HDD cage)GPU length360 / 410 mm (without front heatsink)Space for cabling behind the board tray33-35 mmMaterialsSteel (body and right panel), TG tempered glass (left panel)Dust filterstop, front, bottomSupported power suppliesATX
ATX-korpus • Esi- ja külgpaneel karastatud klaasist • Kahekordne kambristruktuur • Lihtne kaablite haldamine • Mahutab kuni 445 mm pikkuseid graafikakaarte