Internal 6x 2.5 "/3.5", 2x 2.5 ", 8x 2.5" /3.5 "(optional), 2x 2.5" (optional), Front I / O 1x USB-C 3.1 (20-pin Key-A header), 2x USB-A 3.0, 1x microphone, 1x headphones, PCI slots 9 (2x riser card), Fan (front) 2x 140mm, 1000rpm, 18.9dB (A) or 3x 140mm (optional), Fan (rear) 1x 140mm, 1000rpm, 18.9dB (A), Fan (top) 3x 140mm (optional), Fan (other) 2x 140mm (optional), Radiator sizes 120/140/240/280 / 360mm in front, 120/140/240/280/360 / 420mm above, 120/140/240 / 280mm below, 120mm in the back, Mainboard up to ATX (285mm wide), Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6") / ATX (12 "x9.6") / E-ATX (12 "x11.2"), Power supply ATX (max. 250mm deep), PSU position below, CPU cooler max. 185mm height Graphics cards max. 315mm (491mm without HDD cage without front fan, 467mm without HDD cage with front fan), Color anthracite, inside anthracite, Lighting without lighting, Dimensions (WxHxD) 240x475x541mm, Volume 61.67l, Weight 10.50kg, Enclosure type miditower, Special features Cable management, dust filter, integrated fan control, window made of glass Note Mainboard and case manufacturers refer to different dimensions as E-ATX. Mainboards with E-ATX / SSI EEB dimensions of 305x330mm or 12 "x13" are not supported, w/o psu, FD-C-MES2A-04
Internal 2x 2.5 "/3.5" (transverse, hard disk cage), 2x 2.5 ", Front I / O 1x USB-A 3.0, 2x USB-A 2.0, 1x microphone, 1x headphone, PCI slots 4, Fan (front) 2x 140mm (optional), Fan (rear) 1x 120mm, 1000rpm, 16dB (A), Fan (top) 1x 200mm (optional) or 2x 140mm (optional), Radiator sizes 120/140/240 / 280mm at the front, 120/140/240 / 280mm at the top, 120mm at the back, Mainboard up to µATX, Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6"), Power supply ATX (max.160mm deep), PSU position below, CPU cooler max. 165mm height, Graphics cards max. 330mm, Color black, inside black, Lighting integrated LED control, integrated RGB LED lighting, Dimensions (WxHxD) 220x411x441mm, Volume 39.88l, Weight 6.10kg, Housing type mini tower, Special features dust filter, viewing window made of glass, CA-1Q9-00S1WN-00
Personalize your rig with addressable RGB modes! The A1 PLUS features a tinted transparent stand and the addressable RGB lights pierce through to create an awesome lighting experience. Loop in More Color! The A1 PLUS comes with two complementary Sirius Loop ASL120 fans. The matte black structure is fitted with dual radiant addressable RGB loops. The circular RGB outline is presented on both sides of the fan so lighting is present no matter the fan placement. Top Panel Wireless Charger The A1 PLUS's convenient top wireless charging station is now compatible with WPC Qi 1.2. It now emits 10W of power to strengthen the charging capacity to Qi enabled mobile devices and gaming mice.
Stylisches Gehäuse für UCFF-Boards (Intel NUC), Lüfterlose Kühlung durch passives Gehäusedesign mit großen Finnen, Edler Look durch gebürstetes Aluminium in schwarz, Vertikal und horizontal platzierbar, Platz für einen 2,5-Zoll-Datenträger
Elegant midi-tower in white, side doors made of tempered glass, addressable RGB LED lighting, space for 2x 360 mm radiators, maximum 420 mm radiator, supports graphics cards up to 435 mm long, extensive water cooling support, and three pre-installed fans.
Midi-Tower in Schwarz, 4x ARGB-Lüfter vorinstalliert, Mesh-Front, Radiatoren bis zu 360 mm, Grafikkarten bis 290 mm Länge, 2x USB 3.0/ 1x 2.0, Netzteilabdeckung
Shadow X2 Case Mesh Mesh front panel. Tempered glass hinged side door. Effective component protection and excellent component cooling. Set of dust filters. Wide compatibility with AIO water cooling systems. 4 x 120 mm fans included. Modern design. ATX MID-Tower Case Shadow X2 has dimensions of 407 x 211 x 455 mm, a Mesh front, and tempered glass hinged side doors. Thanks to this type of design, it looks very modern and provides great convenience. The dimensions of the hardware allow for the installation of an integrated liquid cooling system of 120, 240, or 360 mm on the front. There is also an optional 120 or 240 mm cooling option on the top of the case. What's more, the case accommodates standard CPU air cooling with a height of no more than 160 mm. Thanks to these dimensions, vertical mounting of the GPU graphics card is possible. 4 fans included with the PWM option The Shadow X2 Savio Case comes with 4 120mm fans with PWM control. They are characterized by performance, durability, and quiet operation. You can easily control them using motherboard-dedicated tools in the operating system or from BIOS/UEFI. In practice, this means that their speed can be adjusted over a wide range, typically from 10 -100%, while keeping noise levels low. I/O ports located on the top of the chassis The Shadow X2 has an I/O panel that features standard Power ON, Reset buttons, one USB 3.0 port, two USB 2.0 ports, HD Audio input, and output, as well as an additional RESET/LED button dedicated to controlling lighting effects. Multitasking interior The Case is characterized by high ergonomics, trouble-free installation and versatility. Its output parameters are a compromise between high performance and modern character. Importantly, you can expand the hardware at any time by adding, for example, more fans, water cooling, or other modules. The great advantage of Shadow X2 from Savio is that it accepts such parameters as you set for it. Specifications: Case Type: ATX Mid-Tower. Motherboard Compatibility: ATX, mATX, ITX, E-ATX. Supported disk formats: 2(1) x 3.5" HDD; 2(3) x 2.5" SSD. I/O ports: 1 x USB 3.0; 2 x USB 2.0; HD audio. Side panel: tempered glass. Maximum VGA length: 340 mm (vertical). Maximum CPU cooling height: 160 mm. Supported power supply types: all types of standard/semi-modular and modular power supplies. PCI expansion slots: 7 Dust filter: 1 x top, 1 x bottom (PSU), 1 x front. Fans included: 4 x 120 mm PWM, 4 pin, 800 - 1800 RPM (3 x front, 1 x rear). Supported fans:- front: 3 x 120/140 mm or 2 x 200 mm- rear: 1 x 120 mm- top: 2 x 120 (140) mm- bottom: 2 x 120 mm Water cooling support:- front: 1 x 120/240/360 mm- rear: 1 x 120 mm- top: 1 x 120/240 mm Product dimensions: (L x W x H) 407 x 211 x 455 mm. Housing material: SPCC 0.6 mml Front panel material/material: Metal mesh with small holes. Net/gross weight: 5.1/6.2 kg.
Clear, neat cable management is one of the most important aspects for an efficient cabinet configuration. The DIGITUS cable management panel provides 4 sturdy steel brackets for efficient use, even when handling larger cable quantities. Each space in between the steel brackets has a brush management panel to move the cable into the cabinet’s interior, thus optimizing cable management. Coloring is done by means of powder coating in the colors light gray (RAL 7035) or jet black (RAL 9005). The steel brackets can be dismantled on request in order to flexibly adjust the panel to various application scenarios.
Das Externes Gehäuse für 2.5" SATA HDD / SSD mit SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) aus Kunststoff dient dem Einbau einer 2.5″ SATA Festplatte oder SSD. Trotz der schlanken Bauform können Festplatten bis zu einer Höhe von 9,5 mm eingebaut werden. Über eine am Gehäuse verbaute USB Type-C Buchse wird das externe Gehäuse mit einem PC oder Notebook verbunden. Das beiliegende USB Type-C zu USB Typ-A Kabel ermöglicht den Anschluss an eine freie USB Typ-A Buchse. Selbstverständlich kann das Gehäuse auch via optionalem USB Type-C Kabel an eine freie USB Type-C Buchse oder einen freien Thunderbolt Port angeschlossen werden. Dank des VIA Chipsatzes unterstützt dieses Festplattengehäuse SuperSpeed USB mit bis zu 10 Gbps Übertragungsgeschwindigkeit. Somit kann die volle SATA 6 Gb/s Übertragungsrate der Festplatte ausgenutzt werden.
