With the Lian Li O11 Dynamic Mini V2, you can make your gaming setup stand out: Despite its compact design, this mini case offers a spacious interior with enough room to bring your vision to life. Whether you prefer air cooling, water cooling with an AiO, or vertical installation of your graphics card—this case allows all that and much more. Compact design: Takes up less space on your desk Room for high-end hardware: Generously designed interior enables the installation of powerful components Clean cable management: Cable brackets and support for motherboards with back-connect design keep cables neat Includes GPU brackets: Graphics card can be installed vertically or horizontally Protection from dust: Easy-to-clean dust filters at multiple spots The Lian Li O11 Dynamic Mini V2: A mini case designed for high-performance gaming hardware Lian Li O11D Mini V2 with example hardware Equipped with tempered glass on the side and front, the Lian Li O11 Dynamic Mini V2 lets you showcase your hardware. Thanks to its compact size, it can be easily placed on your desk, becoming the centerpiece of your gaming setup—all without messy cables inside the case. Clean cable management for a tidy look Lian Li O11D Mini V2 in white with cable straps Thanks to multiple cable brackets, the case allows for neat routing of your cables. A built-in bracket for the heavy 24-pin ATX cable keeps it neatly in place, while cleverly positioned straps keep all other cables together. You can even use the drive cages to hide your cables. Managing cables is easy—whether you’re building your first gaming PC as a beginner or you’re a pro who’s tired of endless cable routing. Flexible installation for motherboards and AiO water coolers With a vertically adjustable motherboard standoff, you have more flexibility when installing the motherboard and AiO water coolers. You can choose between two motherboard positions: The upper position supports 240 mm and 360 mm AiO water coolers, while the lower position also allows for a 280 mm radiator. Well cooled, even under full load Supports up to nine fans Room for two water cooling radiators Mesh panel on top Dust filter at the bottom The fans and radiators ensure sufficient cooling for your gaming hardware, even at full load. A mesh panel and a dust filter help prevent dust buildup inside your case, thus prolonging the lifespan of your hardware. Ready for top performance with space for large GPUs The case interior is designed so that even large graphics cards up to 400 mm fit in easily—whether installed horizontally or vertically. Included GPU brackets ensure secure mounting in both scenarios. This lets you choose how to install your graphics card. Supports Mini-ITX, mATX, and ATX motherboards—including models with back-connect cable management. Combined with clever cable brackets and Velcro straps, this ensures a tidy, clean look: All connections disappear elegantly behind your motherboard. Modular I/O panel Lian Li O11D Mini V2 I/O Panel The I/O panel module can be attached either on top or at the front bottom. This means you can position the case however you like and still easily access the button and ports. If you place the panel on top, the bottom cover can also be removed, improving airflow.
The Montech X5M is a mid-tower case that impresses with strong cooling performance and modern design. Featuring a mesh front and pre-installed fans, it is aimed at gamers and PC builders who value airflow and a clean look. Large mesh front panel ensures optimal airflow Four pre-installed 120mm fans for immediate cooling performance Tempered glass side panel provides a clear view of your hardware Supports motherboards up to mATX and GPUs up to 405 mm in length Clean cable management thanks to a spacious interior Strong airflow for stable performance The Montech X5M PC case is specifically designed for superior airflow, ensuring efficient cooling of your components. Thanks to the well-engineered mesh panel and optimized airflow paths, your PC system stays cool and powerful even under heavy load. With four pre-installed 120mm fans, the case already provides a solid cooling foundation that reliably protects your components from overheating. High-quality dust filters are also included, shielding your PC components from dirt and extending the lifespan of your system—for consistently clean performance. Modern design with glass side panel The case combines a sleek mesh design with a tempered glass side window, allowing you to showcase your hardware while maintaining excellent cooling performance. The addressable RGB lighting of the X5M PC case perfectly highlights your setup. With customizable colors and effects, you can personalize your look and create a unique atmosphere—whether subtle accents or a spectacular light show. Spacious & easy installation The Montech X5M mid-tower offers the perfect balance between size and functionality. With plenty of space for high-performance hardware and efficient cooling, it is the ideal choice for gaming builds. The interior of the Montech X5 Mesh accommodates Micro-ATX motherboards, graphics cards up to 405 mm in length, and multiple storage devices. Thoughtful cable management and pre-mounted fans make assembly quick and uncomplicated.
Tootekood: D32 PRO BLACKGTIN: 6970620554327Korpused
With the D32 series, Jonsbo targets everyone who wants to build their PC in a space-saving way. Unlike the D32 STD, the D32 PRO PC case is aimed at the high-end segment with special and practical features such as Back-Connect or improved front I/O. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for Back-Connect motherboards Tempered glass side panel ensures a subtle appearance Plenty of room for cooling solutions allows installation of high-performance hardware Three dust filters protect your hardware from annoying dust particles The Jonsbo D32 PRO Black: Space-saving and subtle case for high-end hardware Whether you’re building a midrange HTPC or a high-end PC – the D32 PRO Black from Jonsbo comfortably accommodates all kinds of builds. This minimal case fits graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height. In Back-Connect mode, the maximum CPU cooler height is reduced by around seven millimeters. This ensures that, even with the case’s compact design, your hardware gets adequate cooling. Working together with up to six 120 mm fans or one 120 mm fan and four 140 mm fans, the fans ensure enormous airflow inside the case. No cable clutter with Back-Connect With Back-Connect motherboards like ASUS’s BTF series, MSI’s PROJECT ZERO series, or GIGABYTE’s Stealth series, the case in B-mode—with about six to seven millimeters more space—remains almost completely free of visible cable clutter. Since most power and connection cables can be connected at the back of the motherboard, you save time on cable management and still have a clean look inside your case. Combined with the tempered glass side window, your hardware is always on display in an especially appealing way. Powerful cooling in a small space To ensure your powerful hardware stays adequately cooled in this compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for plenty of airflow, a large dual-tower CPU cooler, or even an installable 240 mm AiO, your hardware always stays cool, even under load. Three dust filters on the front, top, and bottom make sure your hardware stays free from dust and dirt. This keeps your temperatures at optimal levels and, among other things, helps extend your hardware’s lifespan.
Micro-ATX case, innovative front-mounted power supply, GPU support up to 430mm, space for up to seven 120mm fans, dedicated radiator chamber, glass panels on front and side, includes three 120mm reverse fansThe Phanteks XT V3 combines a compact design with generous room for modern hardware. With stylish glass panels and robust cooling, your gaming setup becomes a true showcase. Compact Micro-ATX case: ideal for modern builds Ample space: supports GPUs up to 430mm in length Optimized for cooling: up to seven 120mm fans or a 360mm radiator Compatible: supports back-connect motherboards Showcase design: tempered glass panels on the front and side The Phanteks XT V3: Compact Mini Case with Ample Space Phanteks XT V3 Case Thanks to its compact form factor, the Phanteks XT V3 can be easily integrated into a wide variety of gaming or professional setups—while still offering excellent support for modern hardware. The spacious interior accommodates Mini-ITX and Micro-ATX motherboards and supports back-connect designs. High-performance GPUs fit easily as the Phanteks XT V3 provides four PCIe slots and space for GPUs up to 430mm. The rear chamber impresses with an innovative design for premium hardware. Instead of the usual position, the PSU is relocated to the top front. This enables the Phanteks XT V3 to support full-sized ATX power supplies, ensuring greater compatibility. Powerful Cooling Phanteks XT V3 The Phanteks XT V3 delivers outstanding cooling performance. Seven mounting points for 120mm fans—three at the top, three at the bottom, and one at the rear—enable efficient airflow layouts. Out of the box, three powerful M25-120 reverse DRGB fans at the base provide excellent cooling. Additionally, the Phanteks XT V3 features a dedicated top chamber for a 360mm radiator. This makes it easy to install a high-performance AIO cooler, keeping even high-end CPUs reliably cool during the most intense gaming sessions. Showcase Case Phanteks XT V3 With the Phanteks XT V3, you can perfectly display both your hardware and your building skills. The rear chamber offers ample space for cable management along with smart routing options for a tidy system. Completing the look are tempered glass panels on the front and side, providing an unobstructed view of your components from any angle. Comprehensive I/O Panel Phanteks XT V3 The Phanteks XT V3 provides excellent support for your gaming setup thanks to its front I/O panel on the bottom right. It features both a USB Type-A and Type-C port with USB 3.2 Gen 2x2 standard. Additionally, a 3.5mm combo audio jack is available for your gaming headset.
Spacious mid-tower case with tempered glass side panel, supports up to 6 fans, space for radiators up to 360 mm, compatible with motherboards up to Micro-ATX, accommodates GPUs up to 365 mm long and CPU coolers up to 163.5 mm tall, supports up to three drives, and includes four 120 mm ARGB fans.The Cooler Master Elite 302 is a versatile mid-tower case designed for budget-friendly PC builds that prioritize efficient airflow, contemporary interfaces, and ample room for today’s hardware. Perfect for compact gaming or all-purpose systems. Fine mesh front panel maximizes internal airflow Compatible with Micro-ATX and Mini-ITX motherboards Supports graphics cards up to 365 mm and CPU coolers up to 163 mm Room for up to 6 fans or a 360 mm front radiator Front panel with USB 3.1 and HD audio ports Compact design with effective ventilation The Elite 302 features an open mesh front that significantly enhances airflow to both CPU and GPU. Four 120 mm fans come pre-installed, and there is space to add up to two additional fans or mount a 360 mm radiator at the front. Spacious interior despite compact footprint With support for graphics cards up to 365 mm in length and ATX motherboards, the case provides sufficient room for modern components. CPU coolers up to 163 mm high and power supplies up to 160 mm long can be easily accommodated. Robust features for modern setups The case front comes equipped with two USB 3.1 ports and HD audio. Dust filters on the bottom, front, and top keep your system clean, while the minimalist design and white finish blend into any environment.
Midi tower with airflow optimization, mesh front, compatible up to E-ATX, 195 mm CPU cooler height, radiator support up to 360 mm, SimpliCable cable management & magnetic panels, three pre-installed fans The HAVN BF 360 Flow is ideal for gamers and hardware enthusiasts who demand no compromises: solid cooling performance, smart design, and full compatibility. With aerodynamically optimized airflow, a flexible interior, and clever SimpliCable cable management, this case provides the perfect foundation for your high-end build.Airflow cover for targeted cooling of GPU and CPUThree pre-installed fans: 2x 180 mm & 1x 140 mmCompatible with E-ATX motherboards up to 277 mm wideGPU bracket & 410 mm space – ready for RTX 50 SeriesMagnetic panels & SimpliCable – quick maintenance & clean cable managementHAVN BF 360 FlowHAVN BF 360 Flow: Airflow meets styleThe front features a distinctive ribbed mesh that draws in air precisely and reduces flow loss. An integrated guide with a 135° angle directs fresh airflow straight onto the GPU and CPU – providing maximum cooling without heat buildup. Flexible mounts for fans or radiators are included, supporting both air and water cooling solutions.HAVN BF 360 Flow side viewCooling power for your high-end hardwareUp to six fans can be installed. The three pre-installed fans deliver plenty of fresh air right out of the box. Alternatively, radiators up to 360 mm can be mounted at the front and top. With a CPU cooler height of 195 mm and a spacious interior, there’s ample room for large air coolers or custom water cooling loops. Anti-vibration rubber mounts on every bracket ensure whisper-quiet operation, even at peak performance.HAVN BF 360 Flow rear side viewCompatibility without compromiseThe BF 360 offers enough space for motherboards up to E-ATX (max. 277 mm). There’s a generous 410 mm clearance for graphics cards – perfect for current RTX and Radeon powerhouses.The integrated, adjustable GPU bracket reliably prevents GPU sag. Power supplies up to 200 mm fit in the lower compartment without restriction. Two modular drive trays can accommodate either 2x 2.5-inch or 1x 3.5-inch drives – all vibration-damped for quiet operation.HAVN BF 360 Flow rear motherboard traySimpliCable & magnetic panels – smart & stress-freeWith SimpliCable, you benefit from pre-routed cables, straps, and wide channels for super-fast and tidy cable management. The front and top panels are magnetically attached, with rubberized grips and a practical pull tab – maintenance and upgrades have never been easier.HAVN BF 360 Flow I/O panelModern I/O panel for your setupThe I/O includes a USB 3.2 Gen 2 Type-C, two USB 3.2 Gen 2 Type-A ports, and an HD audio jack – perfect for your peripherals and headsets. With the BF 360, you’re well equipped for the future, whether you’re gaming or working.
Volcano Space XL Full Tower Case black Youre investing in a top-tier processor, a powerful graphics card, fast RAM, and a solid motherboard, so why would you hide them from yourself and other household members? The MODECOM Volcano Space XL Full Tower is a case designed so that your computer can finally look truly impressive. The front and side tempered-glass panels create a full visual showcaselike hardware displayed in a glass cabinet. Every detail, every ARGB effect (if you install illuminated fans), and every line of your configuration is visible and highlighted by this majestic chassis. MODECOM Volcano Space XL was designed for those who love personalization and perfect internal cable management, while also needing a spacious Full Tower case. Support for motherboards with reversed connectors allows you to build a modern interior without having to expose cables. Thanks to snap-on panels, you gain quick access to the inside. Installing components, upgrading hardware, and cleaning the interior become even easier. The spacious interior gives you full freedom: large E-ATX boards, robust water cooling (up to 420 mm), long graphics cards, and all the components you need for your gaming setup. With the MODECOM Volcano Space XL, your computer will know no limitsand it will look exactly the way it deserves. If you love technology, need plenty of room for expansion, and want your hardware always within sight, the MODECOM Volcano Space XL Full Tower is made for you. Especially in the Volcano Space XL NF version, which gives you complete freedom to configure cooling according to your preferences, as it comes without pre-installed fans. Because bigger can do more.
Mit seiner durchgehenden Glasfront bietet das ELITE SHARK CM100 von Sharkoon eine spektakuläre Bühne für deine Hardware – und das auf kompaktem Micro-ATX-Format. Dank Platz für bis zu zwei Radiatoren, seitlichem Lufteinzug und vier bereits vorinstallierten Lüftern überzeugt das Gehäuse auch mit exzellenter Kühlleistung. Moderne Anschlussmöglichkeiten und die Unterstützung aktueller BTF-Mainboards machen das Micro-ATX-Gehäuse zur idealen Wahl für ambitionierte Hardware-Enthusiasten. Die speziell gestaltete Glasfläche des ELITE SHARK CM100 erlaubt einen beeindruckenden 270-Grad-Blick ins Gehäuseinnere und bringt Highend-Komponenten eindrucksvoll zur Geltung. Trotz der großen Glasflächen sorgt der seitliche Lufteinzug in Kombination mit vier vorinstallierten 120-mm-ARGB-Lüftern für eine starke Kühlleistung. Eine integrierte ARGB-Steuerung sowie einen PWM-Lüfterhub mit fünf Plätzen ist ebenfalls an Bord. Das ELITE SHARK CM100 ist trotz kleinem Formfaktor wie geschaffen für aufwendige Wasserkühlungssysteme und bietet ausreichend Platz für bis zu zwei Radiatoren gleichzeitig. Das ELITE SHARK CM100 unterstützt auch moderne Micro-ATX-Mainboards mit BTF-Layout, die durch rückseitig platzierte Anschlüsse für ein besonders aufgeräumtes Kabelmanagement sorgen. Trotz des Micro-ATX-Formfaktors finden Grafikkarten bis zu einer Länge von 400 mm, CPU-Kühler bis 173 mm Höhe sowie Netzteile mit bis zu 183 mm im Inneren Platz. Wer viel Speicher benötigt, wird ebenfalls fündig: Das Gehäuse erlaubt die Montage von bis zu zwei 3,5-Zoll-Festplatten oder bis zu drei 2,5-Zoll-SSDs.
The View 390 TG Snow Mid-Tower Case stands out with a striking design and enhanced visibility thanks to its curved panel and tempered glass panel, allowing users to showcase their systems. The View 390 TG Mid-Tower Case is engineered for next-gen builds and supports both standard and hidden-connector motherboards from ASUS, MSI, and GIGABYTE. The View 390 TG comes equipped with two 120mm PWM fans at the rear, ensuring efficient cooling performance. For optimal cooling, users can install a 360mm radiator on the right side of the View 390 TG Mid-Tower Case. The rotatable PCI-E slots support both horizontal and vertical GPU installation. A supplied GPU holder and riser cable bracket also help support the GPU and prevent sagging. Maximize the visual effects of your View 390 TG Mid-Tower Case by upgrading it with our LCD screen kit. For storage capacity, the View 390 TG Mid-Tower Case offers maximum support for up to three 2.5" SSDs or two 3.5" HDDs in total. Two USB 3.0 ports, one USB 3.2 Gen 2 Type-C port, and one HD audio port are located on the top for easy direct access when needed.
The View 390 TG Mid-Tower case stands out with its striking design and improved visibility, thanks to a curved panel and a tempered glass panel, allowing users to showcase their system. The View 390 TG Mid-Tower case is designed for next-gen builds and supports both standard and hidden-connector motherboards from ASUS, MSI, and GIGABYTE. The View 390 TG comes with two 120mm PWM fans at the rear to ensure effective cooling performance. For optimal cooling, users can install a 360mm radiator on the right side of the View 390 TG Mid-Tower case. The rotatable PCI-E slots support both horizontal and vertical GPU mounting. An included GPU holder and riser cable bracket also help to support the GPU and prevent sagging. Maximize the visual effects of your View 390 TG Mid-Tower case by upgrading it with our LCD screen kit. For storage capacity, the View 390 TG Mid-Tower case offers maximum support for up to three 2.5-inch SSDs or two 3.5-inch HDDs. Two USB 3.0 ports, one USB 3.2 Gen 2 Type-C port, and one HD audio port are conveniently located on the top for direct access when needed.
PC case Volcano AQ400 ARGB MIDI WHITE The MODECOM Volcano AQ400 ARGB MIDI is a representative of the Volcano AQ case series, characterized by an eye-catching design with rounded shapes of the front panel (in this case, a perforated metal panel), support for installing motherboards with reversed connectors, four 120 mm ARGB fans included as standard with an ARGB lighting controller, and support for water-cooling radiators up to 420 mm, as well as numerous perforations on the side panels to ensure efficient cooling performance. A distinctive feature of the AQ400 version is the LCD screen located on the side of the case, which allows users to display images, play videos in MP4 format, or monitor temperatures and workload of the processor, graphics card, and RAM usage.All these features are complemented by two USB 3.0 ports and one USB-C port (USB 3.2 Gen 2). This is a case designed to showcase components and personalize the computer to your own style.
Midi tower with three glass panels, GPUs up to 380 mm, CPU coolers up to 170 mm, motherboards up to E-ATX compatible, featuring back-connect designs With the Phanteks Evolv X2 Matrix, you can build a striking gaming system with ample space for modern high-end hardware. The case supports E-ATX motherboards, large graphics cards, and powerful cooling. Motherboards with back-connect features such as ASUS BTF and MSI Project Zero help keep the interior tidy. Three glass panels offer an unobstructed view of your setup. There is also a 900-LED pixel matrix at the base of the case. Spacious mid-tower: Perfect for modern hardware Compatible with back-connect boards: ASUS BTF & MSI Project Zero Vertical cooling: Space for up to seven 120 mm fans GPU compatibility: Graphics cards up to 380 mm in length Clean look: Three large glass panels to showcase your hardware Matrix with 900 LEDs: Fully customizable display & effects Phanteks Evolv Series X2: Showcase case for powerful hardware The interior fits motherboards from Mini-ITX to E-ATX and supports boards with back connectors. This keeps the inside neat and organized. Eight PCIe slots and 380 mm of space for your GPU make installing large graphics cards easy. A PC case that wants to be seen Three large exterior glass panels provide an unobstructed view of your components. Metal covers conceal fans and accessories, making your hardware look as if it is floating. The LED matrix display runs along the front and right side of the case floor, showing system information or animations. Whether temperature display, time, or custom texts – you can easily customize the screen to your style, making it a real highlight in your gaming setup. Powerful cooling with vertical airflow The case employs a vertical cooling design: cool fresh air enters from below and warm exhaust air exits at the top. Up to seven 120 mm fans can be installed, all hidden within the panels for a clean look. Powerful & quiet cooling options Bottom: three 120 mm fans Top: three 120 mm fans / radiator up to 360 mm Rear: one 120 mm fan With a CPU cooler height of up to 170 mm, large tower coolers are also possible. A 360 mm radiator will fit perfectly in the top panel for AiO users. NEXLINQ: Simple fan & lighting control The Evolv X2 Matrix is part of the NEXLINQ ecosystem. Fans, coolers, and RGB components connect via a hub and can be conveniently controlled through software. You can use automatic or custom fan curves and adjust lighting colors. Mid-tower supporting back-connect motherboards Additionally, motherboards from Mini-ITX up to E-ATX are supported – including back-connect models such as ASUS BTF, MSI Project Zero, and GIGABYTE Project STEALTH. This keeps the interior especially tidy. Modular I/O panel The I/O panel is located on the bottom side. This allows the case to fit perfectly with your desk and provides easy access to the ports.
The Viewport Mini, in its elegant black version, is a mini-tower case featuring front and side panels made of tempered glass, providing a panoramic view of the high-performance interior components. It supports Micro ATX and Mini-ITX motherboards and offers advanced cooling options with 7 fan slots and liquid cooling compatibility for 240/280 mm and 120 mm radiators. The included ARGB fans draw air in through mesh ventilation to optimize airflow. Ideally suited for gaming and high-performance applications, it accommodates GPUs up to 355 mm and CPU coolers up to 165 mm.
Cabinet Form Factor: Midi Torn Mainboard Form Factor1Supported Mainboard Form Factor: ATXMicro ATX 3.5-inch Internal Drivesahtleid1(3.5-mm minijack) Headphones: 1(3.5-mm minijack) External värv: must Package Type1kg Pack kaal Netto (kg): 2.8 kg Pieces in pack1Box kaal Brutto (kg): 3.61kg Retail Packaging Netokaal Carton: 0.5 kg Retail Packaging Netokaal plastik1kg Packs in Box: 1EAN Code: 426045564361
Cabinet Form Factor: Midi Torn Mainboard Form Factor1Supported Mainboard Form Factor: ATXMicro ATX 3.5-inch Internal Drivesahtleid12.5-inch Internal Drivesahtleid: 2 Expansion pesasi1(3.5-mm minijack x 2) Power seadme tüüp: toiteplokk Optional Power Device Location1Lisatarvikud: Screws Chassis Features1kg Pack kaal Netto (kg): 2.8 kg Pieces in pack1Box kaal Brutto (kg): 3.61kg Retail Packaging Netokaal Carton: 0.5 kg Retail Packaging Netokaal plastik1kg Packs in Box: 1EAN Code: 42604556435971
No. of drive bays: 3 MOLEX power connectors: 2 Floppy power connectors: 1 SATA power connectors: 4 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 0 PCI-E 8-pin power connectors: 0 Number of power supply connector 4-pin 12V: 0 Number of power supply connector 4+4-pin 12V: 1 8-pin 12V power connectors: 0 Weight: 3.55
