Tootekood: D32 PRO BLACKGTIN: 6970620554327Korpused
With the D32 series, Jonsbo targets everyone who wants to build their PC in a space-saving way. Unlike the D32 STD, the D32 PRO PC case is aimed at the high-end segment with special and practical features such as Back-Connect or improved front I/O. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for Back-Connect motherboards Tempered glass side panel ensures a subtle appearance Plenty of room for cooling solutions allows installation of high-performance hardware Three dust filters protect your hardware from annoying dust particles The Jonsbo D32 PRO Black: Space-saving and subtle case for high-end hardware Whether you’re building a midrange HTPC or a high-end PC – the D32 PRO Black from Jonsbo comfortably accommodates all kinds of builds. This minimal case fits graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height. In Back-Connect mode, the maximum CPU cooler height is reduced by around seven millimeters. This ensures that, even with the case’s compact design, your hardware gets adequate cooling. Working together with up to six 120 mm fans or one 120 mm fan and four 140 mm fans, the fans ensure enormous airflow inside the case. No cable clutter with Back-Connect With Back-Connect motherboards like ASUS’s BTF series, MSI’s PROJECT ZERO series, or GIGABYTE’s Stealth series, the case in B-mode—with about six to seven millimeters more space—remains almost completely free of visible cable clutter. Since most power and connection cables can be connected at the back of the motherboard, you save time on cable management and still have a clean look inside your case. Combined with the tempered glass side window, your hardware is always on display in an especially appealing way. Powerful cooling in a small space To ensure your powerful hardware stays adequately cooled in this compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for plenty of airflow, a large dual-tower CPU cooler, or even an installable 240 mm AiO, your hardware always stays cool, even under load. Three dust filters on the front, top, and bottom make sure your hardware stays free from dust and dirt. This keeps your temperatures at optimal levels and, among other things, helps extend your hardware’s lifespan.
Tootekood: D32 PRO WHITEGTIN: 6970620554334Korpused
With the D32 series, Jonsbo targets everyone who wants to build their PC in a space-saving way. The D32 PRO PC case, in contrast to the D32 STD, comes with special and practical features such as back-connect or improved front I/O, aimed at the high-end segment. Elegant and space-saving design for mATX motherboards Seamless cable management with cut-outs for back-connect motherboards Tempered glass side panel ensures a subtle appearance Plenty of room for cooling solutions allows for installation of powerful hardware Three dust filters protect your hardware from troublesome dust particles The Jonsbo D32 PRO White: A space-saving and understated case for high-end hardware Whether it’s a midrange HTPC or a high-end PC, the D32 PRO White from Jonsbo offers comfortable space for different types of builds. This minimalist case can accommodate graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height. In back-connect mode, the maximum CPU cooler height is reduced by just under seven millimeters. This ensures adequate cooling for your hardware even with the compact design of the case. In combination with up to six 120-mm fans, or one 120-mm fan and four 140-mm fans, the fans also provide exceptional airflow inside the case. No cable clutter with back-connect With back-connect motherboards such as ASUS's BTF series, MSI's PROJECT ZERO series, or GIGABYTE's Stealth series, the case in B mode—with about six to seven millimeters of additional space—is almost completely free of visible cable clutter. Since most power and connection cables can be connected on the back of the motherboard, you save on cable management while still keeping your case looking clean. Together with the tempered glass side window, this makes for an especially attractive view of your hardware. Powerful cooling in a small space To ensure that your high-performance hardware stays cool even in this compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120-mm fans for sufficient airflow, a large dual-tower CPU cooler, or even a 240-mm AiO cooler, your hardware will stay cool even under load. Three dust filters at the front, top, and bottom ensure your hardware remains free from dust and dirt. As a result, your temperatures always stay optimal and, among other benefits, the lifespan of your hardware is also extended.
MSI PRO SHIELD M100P. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Bagerste ventilatorer installeret: 1x 80 mm, Understøttede diametre for bagerste ventilatorer: 80,90 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 166 mm, Dybde: 312 mm, Højde: 354 mm. Pakkevægt: 3,58 kg
Tootekood: D32 PRO MESH BLACKGTIN: 6970620554341Korpused
With the D32 series, Jonsbo targets everyone who wants to build their system in a space-saving manner. Unlike the D32 STD, the D32 PRO PC case is aimed at the high-end segment with special and practical features such as back-connect and improved front I/O. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for back-connect motherboards Mesh side panel for a subtle appearance Plenty of space for cooling solutions allows the installation of powerful hardware Three dust filters protect your hardware from annoying dust particles The Jonsbo D32 PRO Mesh: Compact and subtle case for high-end hardware Whether midrange HTPC or high-end PC – builds of all types fit comfortably in the D32 PRO Mesh by Jonsbo. The minimalistic case accommodates graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height. In back-connect mode, only the maximum CPU cooler height is reduced by about seven millimeters. Thus, despite the compact design of the case, adequate cooling for your hardware is ensured. Working with up to six 120 mm fans or one 120 mm and four 140 mm fans, airflow inside the case is enormous. No cable clutter with back-connect With back-connect motherboards, such as those from ASUS’s BTF series, MSI’s PROJECT ZERO series, or GIGABYTE’s Stealth series, the case in B-mode, with approximately six to seven millimeters more space, is nearly free from visible cable clutter. Since most power and connection cables can be plugged in at the back of the motherboard, you save on cable management while still maintaining a clean look inside your case. Powerful cooling in a small space To ensure your high-performance hardware is sufficiently cooled in such a compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans providing sufficient airflow, a large dual-tower CPU cooler, or even an installable 240 mm AiO, your hardware stays cool – even under load. Three dust filters at the front, top, and bottom make sure your hardware stays free from dust and dirt. This keeps your temperatures always at an optimal level and also extends the lifespan of your hardware.
With the D32 series, Jonsbo targets anyone looking to build a space-saving setup. The D32 PRO PC case, unlike the D32 STD, is aimed at the high-end segment with special and practical features such as Back-Connect or an improved front I/O.Elegant and space-saving design for mATX motherboardsSeamless cable management with cutouts for back-connect motherboardsMesh side panel creates a discreet appearanceAmple space for cooling solutions allows installation of powerful hardwareThree dust filters protect your hardware from annoying dust particlesThe Jonsbo D32 PRO Mesh: Space-saving and discreet case for high-end hardwareWhether mid-range HTPC or high-end PC – builds of all types can comfortably fit in the D32 PRO Mesh from Jonsbo. In this minimal case, graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height can be accommodated. In back-connect mode, the maximum height of the CPU cooler is reduced by just under seven millimeters.Thus, adequate cooling for your hardware is ensured even with the compact design of the case. Combined with up to six 120-mm fans, or one 120-mm fan and four 140-mm fans, the fans also provide tremendous airflow inside the case.No cable clutter with Back-ConnectWith back-connect motherboards such as the BTF series from ASUS, the PROJECT ZERO series from MSI, or the Stealth series from GIGABYTE, the case in B-mode, with about six to seven millimeters more space required, is virtually free of visible cable clutter.Since most power and connection cables can be attached to the back of the motherboard, you save on cable management and still maintain a clean look inside your case.Powerful cooling in a small spaceTo ensure your high-performance hardware stays properly cooled in the compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120-mm fans for sufficient airflow, a large dual-tower CPU cooler, or even a 240-mm AiO that can be installed, your hardware remains cool even under load.Three dust filters on the front, top, and bottom ensure your hardware stays free from dust and dirt. This way, your temperatures remain at an optimal level and the service life of your hardware is extended.
Midi tower with optimized airflow, mesh front, compatible with up to E-ATX, 195 mm CPU cooler height clearance, radiator support up to 360 mm, SimpliCable cable management & magnetic panels The HAVN BF 360 is perfect for gamers and hardware enthusiasts who don’t want to compromise: solid cooling performance, smart design, and full compatibility. With aerodynamically optimized airflow, a flexible interior, and clever SimpliCable cable management, this case provides the perfect foundation for your high-end build.Airflow cover for targeted cooling of GPU and CPUSpace for up to seven fans or two 360mm radiatorsCompatible with E-ATX motherboards up to 277 mm wideGPU bracket & 410 mm space – ready for RTX 50 SeriesMagnetic panels & SimpliCable – quick maintenance & clean cable managementHAVN BF 360HAVN BF 360: Airflow meets styleThe front features a distinctive ribbed mesh that draws air in precisely and reduces flow losses. An integrated guide with a 135° angle directs fresh airflow straight onto the GPU and CPU – for maximum cooling without heat buildup. Flexible mounts for fans or radiators are included, whether you prefer air or water cooling.HAVN BF 360 side viewCooling power for your high-end hardwareThere is room for up to seven fans: 3x front, 3x top, and 1x rear. Alternatively, you can install radiators up to 420 mm at the front. With 195 mm CPU cooler height clearance and a spacious interior, you have plenty of room for large air coolers or custom loops. Anti-vibration rubber mounts on every bracket ensure whisper-quiet operation at maximum performance.HAVN BF 360 rear side viewCompatibility without compromisesThe BF 360 offers enough space for motherboards up to E-ATX (max. 277 mm). There’s a generous 410 mm of room for graphics cards – suitable for current RTX and Radeon powerhouses.The integrated, adjustable GPU bracket reliably prevents GPU sag. Power supplies up to 200 mm fit in the lower compartment without restrictions. Two modular drive trays can hold either 2x 2.5-inch or 1x 3.5-inch drives – naturally vibration-damped for quiet operation.HAVN BF 360 rear motherboard traySimpliCable & magnetic panels – smart & stress-freeSimpliCable provides pre-made cable routes, straps, and wide channels for super-fast and tidy cable management. The front and top panels are magnetically attached, with rubberized grip edges and a practical pull strap – maintenance and upgrades have never been so easy.HAVN BF 360 I/O panelModern I/O panel for your setupThe I/O includes a USB 3.2 Gen 2 Type-C, two USB 3.2 Gen 2 Type-A ports, and an HD audio jack – perfect for your peripherals and headsets. With the BF 360, you’re well equipped for the future, whether for gaming or as a workstation.
Limited hololive edition, panorama glass with Suisei design, vertical GPU with PCIe 4.0 riser, powerful cooling, dual-chamber construction The HYTE Y70 Suisei Edition is a limited showcase case for fans of hololive V-Tuber Suisei and discerning PC enthusiasts. It combines the renowned Y70 design with exclusive Suisei graphics, high-quality materials, and maximum hardware compatibility. Limited Suisei Edition featuring Hoshimachi Suisei design and collector’s value Three-piece panoramic glass wonderfully displays hardware and graphics cards Vertical GPU mounting with PCIe 4.0 riser for a clean look and optimal presentation Dual-chamber interior separates hardware and cables for improved airflow Extensive cooling options for both air and water cooling, suitable even for high-end systems Limited design for hololive fans The Suisei Edition brings detailed character graphics and an elegant midnight blue design to the Y70 case. Gold accents and lettering highlight the nocturnal aesthetic. The panoramic glass makes the case a centerpiece of any desk or setup. Plenty of space for powerful hardware The Y70 supports motherboards up to E-ATX and can accommodate graphics cards up to 422 mm in length. With 4-slot GPU support, there is also room for especially large graphics cards. CPU coolers up to 180 mm and power supplies up to 235 mm fit easily inside the case. Strong cooling and thoughtful design Up to ten fans or multiple 360 mm radiators ensure efficient cooling. The dual-chamber design simplifies cable management and keeps the showcase area neat. Tool-less panels and modular mounts make assembly and maintenance especially convenient.
The Thermaltake View 390 Air Mid Tower Chassis is the perfect choice for demanding gamers and PC enthusiasts who value both functionality and aesthetics. Featuring a modern design in black and an array of innovative features, it provides maximum adaptability and performance. Outstanding hardware support: accommodates CPU coolers up to 160 mm, graphics cards up to 420 mm, and power supplies up to 200 mm. Expansion options: supports up to 11 fans or radiators up to 360 mm for powerful cooling. Compatibility with Hidden Connector motherboards: fully compatible with ASUS and MSI Hidden Connector motherboards for an innovative build. Two pre-installed CT120 fans ensure optimal cooling performance right out of the box. This case is not only a technical powerhouse but also a real eye-catcher for any gaming rig. With excellent value for money, the Thermaltake View 390 Air is the ideal choice for high-performance PC builds. Optimize your gaming experience—now with the Thermaltake View 390 Air!
The View 380 XL WS ARGB Mid-Tower Case is designed for next-generation motherboards and features a specialized design that supports both standard motherboards and motherboards with hidden connectors from ASUS, MSI, and GIGABYTE. The dual-chamber layout provides more building space, improved cable management, and increased airflow for greater flexibility. The View 380 XL WS ARGB Mid-Tower Case offers enhanced visibility with tempered glass on the front and left side, allowing users to showcase their system. For optimal cooling, users can install a 360mm radiator at the top and on the motherboard side. The case includes three 120mm ARGB-Lite reverse fans with hydraulic bearings on the motherboard side and one 120mm ARGB-Lite fan with a hydraulic bearing at the rear. The stunning lighting effects can be controlled via motherboard software from ASUS, GIGABYTE, MSI, and ASRock. The integrated GPU bracket prevents graphics card sag and provides additional support. The View 380 XL WS ARGB Mid-Tower Case offers excellent expansion options. It supports a CPU cooler with a maximum height of 160mm, GPU installation up to 420mm in length, and a power supply up to 180mm in length. The case is optimized for superior cooling performance and comes with four 120mm ARGB-Lite fans with hydraulic bearings, and supports up to ten 120mm fans in total. For storage compatibility, the View 380 XL WS ARGB Mid-Tower Case supports up to three 2.5-inch SSDs or one 3.5-inch HDD. The lower I/O ports include two USB 3.0 ports, one USB 3.2 Gen 2 Type-C port, and one HD audio jack, providing convenient access when the PC case is on a desk.
Antec FLUX REAR. Form factor: Midi Tower, Type: PC, Product color: Black. Front fans installed: 2x 140 mm, Supported diameters for front fans: 140 mm, Rear fans installed: 1x 140 mm. Supported HDD sizes: 2.5", 3.5". Width: 240 mm, Depth: 460 mm, Height: 460 mm. Package weight: 9.72 kg
Das Elite 681 definiert mit seinen 270°-Panorama-Hartglasplatten und dem echten Zweikammer-Layout den Showcase-Bereich neu. Entwickelt für Hochleistungssysteme, vereint es edle Ästhetik mit modernster Luftstromtechnik. Von der vertikalen Kühlung bis zur umfassenden Radiator-Kompatibilität ist dieses Gehäuse für den Einsatz mit Next-Gen-Hardware mit Stil und Präzision ausgelegt. Das Gehäuse unterstützt zwei 360-mm-Radiatoren (oben und unten) und einen 280-mm-Seitenradiator für benutzerdefinierte Schleifen oder leistungsstarke AIOs. Bis zu 10 Lüfter mit Anordnung von unten nach oben beschleunigen die Wärmeableitung und sorgen so für eine überragende Wärmeleistung. Das Elite 681 enthält 4 ARGB-Lüfter (3 Rückwärtseinlass + 1 Auslass) mit Daisy-Chaining und vollständiger Synchronisierung der Motherboard-Beleuchtung. Unterstützt GPUs bis zu 410 mm, perfekt für die neuesten Grafikkarten der nächsten Generation. Verfügt über USB 3.2 Gen 2x2 Typ-C (20 Gbit/s) und zwei USB 3.0-Anschlüsse für schnelle Konnektivität.
Eesmine paneel ehtsast puidust ja karastatud klaasist • Kahe sektsiooniga konstruktsioon parandab õhuringlust ja korda • Toetab kuni 410 mm pikkuseid graafikakaarte • Ruumi mitmele 360 mm jahutile ja 9 ventilaatorile • USB 3.2 Gen 2x2 Type-C port eesmisel paneelil
The FSP U530-BS comes with four high-density, sound-dampening side panels that significantly reduce ambient noise. Reinforced with 0.7 mm thick SPCC steel plates, it keeps noise levels to a minimum, so you can focus undisturbed on your work or gaming. The front fan is equipped with special fan covers that ensure targeted airflow and additional noise dampening. Thanks to the four pre-installed quiet 120 mm fans (three at the front and one at the rear), the case delivers outstanding cooling performance. Even with the most demanding components, the system stays cool and efficient. It supports radiators up to 360 mm and ensures your components are reliably cooled even under heavy load. The FSP U530-BS case offers enough space for high-performance graphics cards up to 375 mm in length and a CPU cooler height of up to 175 mm. An integrated graphics card support keeps even heavy components stable without wobbling. The spacious interior allows easy installation of EEB, E-ATX, ATX, Micro-ATX, and Mini-ITX motherboards and provides ample room for a versatile system configuration. In addition to its excellent functionality, the U530-BS impresses with a minimalist and elegant design. It offers excellent air circulation, optimized by mesh dust filters and fan covers. With practical support for ATX power supplies and various drive sizes (3.5" and 2.5" SSD), this case can be perfectly adapted to your needs.
Tootekood: T9 BLACK PCIE 5.0GTIN: 6970620555607Korpused
Space-saving ITX case with elegant design, wooden accents on the underside, supports graphics cards up to 310 mm with PCIe 5.0 riser cable, steel side panel with ventilation slots, compatible with ITX motherboards, CPU coolers up to 78 mm The Jonsbo T9 combines a compact design with a subtle and timeless appearance and robust hardware support. Despite its space-saving form factor, this mini case provides enough room for an ITX motherboard, a 3-slot graphics card up to 310 mm, and two 120 mm fans. Elegant and space-saving design fits into any setup Graphics cards up to 310 mm with vertical mounting and PCIe 5.0 riser cable Two 120 mm fans ensure optimal cooling performance Hidden power supply cabling for a tidy appearance Dust filters protect your hardware from dust and dirt The Jonsbo T9: Timeless elegance meets minimal design Whether as a mini workstation or a compact gaming PC – the Jonsbo T9 gives you a variety of options. With its understated design, this case blends seamlessly into any setup, whether in black or silver. At just over 30 centimeters in length, the case is barely larger than a modern gaming console. Powerful hardware in a small footprint The compact Jonsbo T9 easily accommodates an ITX motherboard, two 120 mm fans, and even a graphics card up to three slots wide. This makes the case suitable for high-performance builds, such as with an RTX 5090 Founders Edition. Despite its small size, you don't have to compromise on high-end components. The vertical installation of your graphics card using the included PCIe 5.0 riser cable ensures particularly efficient use of space. The 3-stage adjustment of the dual chambers allows for flexibility: prioritize more room either for a wide GPU or for a CPU cooler up to 78 mm in height. Optimal cooling with protection against dust and dirt To make sure airflow within the case and among your components is not negatively impacted by dust, the Jonsbo T9 features a total of three dust filters. These filter dust on the sides and top panel to ensure smooth, well-cooled operation.
The Xtender is a high-airflow panoramic case designed for maximum air circulation. Five pre-installed fans ensure efficient cooling of powerful components. The eye-catching E-ATX case is also equipped with modern connections and plenty of space for technology. A special highlight of the ARCTIC Xtender is the modern glass look, which is created by a seamless connection of the front and side panels made of tempered glass. The Xtender comes with five addressable ARGB fans ex works, three of which are inverted and pull the air from the side into the housing for ideal airflow. If you prefer to cool your case with water, you can also operate another radiator of up to 420 mm in addition to a 420 mm radiator. Three 2.5" drives are supported behind the mainboard tray. The removable drive cage offers mounting rails for two 3.5"/2.5" and another 2.5" drive. With a space of 482 mm, large graphics cards can also be used in the Xtender. Additionally, CPU coolers can have a height of up to 171 mm and power supplies can have a length of up to 318 mm. The well thought-out cutouts and the optimally placed cable holders ensure easy cable management. Easily removable, reinforced filters protect against dust and enable quick cleaning. Tower case type Color black EAN 4895265001314 Manufacturer no. ACPCC00023A Midi tower design Motherboard form factor E-ATX Material tempered glass, steel Window Kit Yes Internal dimensions plug-in card length maximum 482 mm Internal dimensions CPU cooler height maximum 171 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 318 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Drive bays 2.5 in 3.5 inches internal Slots full size 7 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Back 2 x 120 mm P12 Pro A-RGB fans pre-installed Notes Cable management: 35 mm, dust filter: top, right side, top: 3 x 120 mm fans can be installed, alternatively 3 x 140 mm fans can be installed, side: 3 x 140 mm P14 Pro Reverse A-RGB fans pre-installed, alternatively 3 x 120 mm fans can be installed Lighting Yes, RGB Water cooling possible Yes Water cooling possible Supported radiators Top: up to 360/420 mm, Side: up to 360/420 mm. Rear connection of the mainboard No Learn more Modular removable fan rails to install 140mm fans on top or side Accessories available: screws, cable ties, operating instructions Volume 65 l Dimensions Width: 23.1 cm x Height: 52.9 cm x Depth/Length: 52.9 cm Weight 15.4kg
The Xtender is a high-airflow panoramic case designed for maximum air circulation. Five pre-installed fans ensure efficient cooling of powerful components. The eye-catching E-ATX case is also equipped with modern connections and plenty of space for technology. A special highlight of the ARCTIC Xtender is the modern glass look, which is created by a seamless connection of the front and side panels made of tempered glass. The Xtender comes with five addressable ARGB fans ex works, three of which are inverted and pull the air from the side into the housing for ideal airflow. If you prefer to cool your case with water, you can also operate another radiator of up to 420 mm in addition to a 420 mm radiator. Three 2.5" drives are supported behind the mainboard tray. The removable drive cage offers mounting rails for two 3.5"/2.5" and another 2.5" drive. With a space of 482 mm, large graphics cards can also be used in the Xtender. Additionally, CPU coolers can have a height of up to 171 mm and power supplies can have a length of up to 318 mm. The well thought-out cutouts and the optimally placed cable holders ensure easy cable management. Easily removable, reinforced filters protect against dust and enable quick cleaning. Tower case type Color black EAN 4895265001321 Manufacturer no. ACPCC00024A Midi tower design Motherboard form factor E-ATX Material tempered glass, steel Window Kit Yes Internal dimensions plug-in card length maximum 482 mm Internal dimensions CPU cooler height maximum 171 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 318 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Drive bays 2.5 in 3.5 inches internal Slots full size 7 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Back 2 x 120 mm P12 Pro A-RGB fans pre-installed Notes Cable management: 35 mm, dust filter: top, right side, top: 3 x 120 mm fans can be installed, alternatively 3 x 140 mm fans can be installed, side: 3 x 140 mm P14 Pro Reverse A-RGB fans pre-installed, alternatively 3 x 120 mm fans can be installed Lighting Yes, RGB Water cooling possible Yes Water cooling possible Supported radiators Top: up to 360/420 mm, Side: up to 360/420 mm. Rear connection of the mainboard No Feature Vertical GPU bracket pre-installed: 196x153x140 mm, up to 482 mm length, mounting up to 3 slots, Compatibility: PCIe 4.0 and backwards compatible, Riser cable: 160 mm, PCIe 4.0 x16 Learn more Modular removable fan rails to install 140mm fans on top or side Volume 65 l Dimensions Width: 23.1 cm x Height: 52.9 cm x Depth/Length: 52.9 cm Weight 15.4kg
The Inter-Tech 4U-4408L is a 4U rackmount storage enclosure for professional server, NAS, backup, virtualization and data center applications. It combines a high drive capacity with extensive expansion options and a cooling system designed for efficient continuous operation. In the front area, the case has eight hot-swap bays that accommodate both 2.5- and 3.5-inch drives and enable tool-free replacement during operation. This is complemented by an additional 2.5-inch hot-swap slot on the back, which is suitable for the operating system or as a cache drive, for example. There are also internal drive spaces available for additional SSDs or HDDs. The backplanes support SAS and SATA drives with a transfer speed of up to 12 Gbit/s. The case supports motherboards from Mini-ITX to SSI-EEB with a maximum size of 335 × 386 mm. Up to eleven slots are available for expansion cards, with graphics cards able to reach a length of up to 330 mm. CPU coolers can be up to 145mm high. An ATX power supply is installed as standard; Alternatively, a rear panel for redundant 2U power supplies can be retrofitted, making the housing also suitable for highly available server systems. Cooling is provided by three centrally located 120 mm fans and two easily removable 80 mm fans in the front area. The cooling system is supplemented by three dust filters behind the front, which ensures uniform air flow and maintenance-friendly operation. There are also two USB 3.2 Gen1 ports on the front for quick access to external storage media. With dimensions of 485 × 690 × 178 mm (W × D × H), the housing corresponds to the standardized 4U rack format and is suitable for installation in 19-inch server cabinets. The robust steel housing weighs around 13.3 kg and is designed for reliable 24/7 operation. Overall, the Inter-Tech 4U-4408L is aimed at users who need a powerful storage enclosure with hot-swap functionality, high expandability and professional features for server and storage systems. Type server case Color black EAN 4262531060014 Manufacturer no. 88887427 Rack design Mainboard form factor E-ATX, Mini-ITX, SSI-EEB Internal dimensions Plug-in card length maximum 330 mm Internal dimensions CPU cooler height maximum 145 mm Internal dimensions power supply form factor ATX Internal dimensions height units 4 U Drive bays 3.5 inches internal Drive bays hot swap Drive bays 2.5 inches internal Drive bays 2.5 in 3.5 inches internal Drive bays hot swap Front ports 2x USB-A 3.2 Gen 1 (5 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. Notes Backplane: 3 x 120 mm fans pre-installed, Behind the front doors: 2 x 80 mm fans pre-installed Rear connection of the mainboard No Feature 8 hot-swap removable frames for 2.5" or 3.5" hard drives, additional 1 hot-swap removable frame in the back panel for 2.5" drives, 2x holders for 2x 2.5" HDD/SSD each or alternatively 1x 3.5" HDD, support for up to 11 expansion cards, support for ATX power supplies or optionally for redundant ones 2U power supplies Further information 2x backplane, 4 hard drives, SAS12 Gb/s, 2x SATA/SAS (SFF8643), 1x 4-pin power connector/backplane Note cage: 435 x 445 x 177.6mm (WxDxH) Accessories available: assortment of screws, keys Optional accessories Optional rear panel for redundant power supplies Volume 60 l Dimensions Width: 48.5 cm x Height: 17.8 cm x Depth/Length: 69 cm Weight 13.3kg
Housing type: Midi Tower ATX Motherboard format acceptable: m-ATX, ATX, Extended ATX, mini ITX 5.25 "bays (external) - 3.5 "bays (internal) 3 pcs 2.5 "bays (internal) 4 pcs The number of expansion slots: 7 +3 pcs. USB socket on the front panel: 1 x USB 3.0, 2 x USB 2.0 Front panel microphone jack: 1 piece. Headphone jack on the front panel: 1 piece. Tool-free assembly: No Height: 487 mm Width: 230 mm Depth: 440 mm Number of fans installed: 5 pcs (2x RGB LED front 20 cm., 1x RGB LED rear 14 cm., 2x top 14 cm) Number of places for additional fans: 0 Maximum length of graphics cards: 370 mm The maximum height of the CPU heat sink: 180 mm Water cooling support: Yes (Front: 360mm; Rear: 120mm) Housing color: Black and silver More information: Dust filter x 3 Tempered glass on the side of the housing LED backlight. Removable side panel 90 degree inverted HD cage Bottom mounted power supply. Cable arrangement system Kit contents: Remote control to control the backlight, screws, cable ties.
DIMENSIONS : (D)420mm X (W)269.5mm X (H)380mm MOTHERBOARD : E-ATX (Max 280 mm wide)/ATX/ Micro-ATX/ Mini-ITX PSU : SFX/ SFX-L MATERIAL : Steel 4 mm Tempered Glass 2mm Aluminum (top and left panel) FAN SUPPORT : Top: 3x 120mm or 2x 140mm Side: 2x 120mm or 2x 140mm Bottom: 3x 120mm or 2x 140mm Rear: 1x 120mm RADIATOR SUPPORT : Top: 360mm or 280mm or 240mm radiator Side: 240mm or 280mm radiator Bottom: 360 or 280mm or 240mm radiator GPU LENGTH CLEARANCE : 395mm CPU COOLER HEIGHT CLEARANCE : 170mm VGA Length : 370mm DRIVES : Right side 2 x 2.5″ SSD + back plate 2 x 3.5″ HDD (or SSD) EXPANSION SLOTS : 3 or 5 or 7 slots (depends on back panel) IO PORTS : 2 x USB 3.0, 1 x USB 3.1 TYPE-C, 1 x HD Audio, Power Button DUST FILTERS : 1 x Top, 1 x Bottom, 2 x Side
Dimensions: 212 x 465 x 398 mm (W x H x D) Material: steel, acrylic glass, plastic Weight: 5.8 kg Color: white, black Form factor: ATX, Micro-ATX, Mini-ITX Fan possible: 3x 120 mm (front) 1x 120 mm (rear) 2x 120/140 mm (cover) 2x 120 mm (bottom) 2x 120 mm (vertical bracket) Fan pre-installed: 1x 120 mm (front) 1x 120 mm (rear) Radiator mountings: 1x 240 mm (cover) 1x 240 mm (vertical bracket) Drives: 2x 3.5 / 2.5 inches (internal) 4x 2.5 inches (internal) Power supply (optional): standard ATX Expansion slots: 7 I / O panel: 1x USB 3.0 2x USB 2.0 1x per audio in / out 1x LED control button 1x power button 1x reset button Maximum graphics card length: 340 mm Maximum power supply length: 190 mm Maximum CPU cooler height: 163 mm
Fractal Design Pop Silent - Torn - ATX Product Type: System cabinet Form Factor: Torn Windowed Side Panel: Jah, tempered glass värv: must TG clear tint I/O Ühendusi: 2 x USB 3.0 Audio sisend Audio joon-out Supported Motherboards: ATX, Mini-ATX, Mini-ITX System Cabinet Features: kaabel management system, toetab 120 mm radiator in rear, PSU dust filters, toetab Kuni 280 mm radiator in front panel Power Device: No toiteplokk (ATX) mõõtmed (WxDxH): 21.5 cm x 47.35 cm x 45.4 cm kaal: 7.3 kg Manufacturer Warranty: 2-year garantii
