With the D32 series, Jonsbo targets anyone looking to build a space-saving setup. The D32 PRO PC case, unlike the D32 STD, is aimed at the high-end segment with special and practical features such as Back-Connect or an improved front I/O.Elegant and space-saving design for mATX motherboardsSeamless cable management with cutouts for back-connect motherboardsMesh side panel creates a discreet appearanceAmple space for cooling solutions allows installation of powerful hardwareThree dust filters protect your hardware from annoying dust particlesThe Jonsbo D32 PRO Mesh: Space-saving and discreet case for high-end hardwareWhether mid-range HTPC or high-end PC – builds of all types can comfortably fit in the D32 PRO Mesh from Jonsbo. In this minimal case, graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height can be accommodated. In back-connect mode, the maximum height of the CPU cooler is reduced by just under seven millimeters.Thus, adequate cooling for your hardware is ensured even with the compact design of the case. Combined with up to six 120-mm fans, or one 120-mm fan and four 140-mm fans, the fans also provide tremendous airflow inside the case.No cable clutter with Back-ConnectWith back-connect motherboards such as the BTF series from ASUS, the PROJECT ZERO series from MSI, or the Stealth series from GIGABYTE, the case in B-mode, with about six to seven millimeters more space required, is virtually free of visible cable clutter.Since most power and connection cables can be attached to the back of the motherboard, you save on cable management and still maintain a clean look inside your case.Powerful cooling in a small spaceTo ensure your high-performance hardware stays properly cooled in the compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120-mm fans for sufficient airflow, a large dual-tower CPU cooler, or even a 240-mm AiO that can be installed, your hardware remains cool even under load.Three dust filters on the front, top, and bottom ensure your hardware stays free from dust and dirt. This way, your temperatures remain at an optimal level and the service life of your hardware is extended.
DarkFlash AIRNOVA computer case (white) + 3 fansDarkFlash AIRNOVA is a spacious Big Tower case that supports E-ATX, ATX, M-ATX, and ITX motherboards, offering space for graphics cards up to 395 mm in length and CPU coolers up to 175 mm in height. It is equipped with ventilation panels with a large 5x5 mm mesh, 3 120 mm fans, and support for water cooling up to 420 mm. The top panel has all the necessary connectors: two USB 3.0 ports, HD Audio input, Power and Reset buttons, and a fast USB Type-C Gen2 (10 Gbps) connector, which significantly improves data transfer.Effective coolingAIRNOVA has been designed with an emphasis on free airflow. 5x5 mm ventilation grilles are located on six sides of the case, which supports effective heat dissipation. Inside, there is room for three 120 mm fans at the bottom, and a total of up to 10 fans can be installed. The case is also compatible with water cooling – a 420 mm radiator can be installed at the front and a 360 mm radiator at the top.Practical mounting solutionsAIRNOVA offers a modular design with a quick-release system. All panels – including the fan frame, dust cover, and motherboard tray – are removable. This facilitates installation, cleaning, and access to components. In addition, there is 33 mm of space for cable routing at the rear, ensuring an aesthetic and tidy installation.Dust protectionDarkFlash AIRNOVA is equipped with 4 dust filters that effectively protect the interior of the case from contaminants such as dust, hair, and fine pollen. The filters are made of densely woven nylon, which traps up to 98% of contaminants, significantly extending the life of the components and reducing the need for frequent cleaning. Each of the filters – located on the top, bottom, and side panels – is easy to remove thanks to magnetic clips and a slide-out system.Includedcomputer casefan x3 ManufacturerDarkFlashModelAIRNOVACase typeBig TowerMotherboard standardE-ATX, ATX, M-ATX, ITXPower supply standardATX (bottom mounting)Internal drive bays2x SSD, 2x HDD / 1x SSD + 1x HDDExpansion slots7Max power supply length200 mmMax graphics card length395 mmMax CPU cooler height175 mmMax number of fans10Fan mounting optionsFront: 3x 120 mm / 3x 140 mmTop: 3x 120 mm / 2x 140 mmRear: 1x 120 mm / 1x 140 mmBottom: 3x 120 mmWater cooling mounting optionsFront: 360 / 420 mmTop: 360 mmNumber of installed fans3Buttons and controlsPower, ResetConnectors2x USB 3.0, 1x USB Type-C Gen2 (10 Gbps), HD AudioColorWhiteHeight538 mmWidth238 mmDepth464 mm
DarkFlash AIRNOVA computer case (black) + 3 fansDarkFlash AIRNOVA is a spacious Big Tower case that supports E-ATX, ATX, M-ATX, and ITX motherboards, offering space for graphics cards up to 395 mm in length and CPU coolers up to 175 mm in height. It is equipped with ventilation panels with a large 5x5 mm mesh, 3 120 mm fans, and support for water cooling up to 420 mm. The top panel has all the necessary connectors: two USB 3.0 ports, HD Audio input, Power and Reset buttons, and a fast USB Type-C Gen2 (10 Gbps) connector, which significantly improves data transfer.Effective coolingAIRNOVA has been designed with an emphasis on free airflow. 5x5 mm ventilation grilles are located on six sides of the case, which supports effective heat dissipation. Inside, there is room for three 120 mm fans at the bottom, and a total of up to 10 fans can be installed. The case is also compatible with water cooling – a 420 mm radiator can be installed at the front and a 360 mm radiator at the top.Practical mounting solutionsAIRNOVA offers a modular design with a quick-release system. All panels – including the fan frame, dust cover, and motherboard tray – are removable. This facilitates installation, cleaning, and access to components. In addition, there is 33 mm of space for cable routing at the rear, ensuring an aesthetic and tidy installation.Dust protectionDarkFlash AIRNOVA is equipped with 4 dust filters that effectively protect the interior of the case from contaminants such as dust, hair, and fine pollen. The filters are made of densely woven nylon, which traps up to 98% of contaminants, significantly extending the life of the components and reducing the need for frequent cleaning. Each of the filters – located on the top, bottom, and side panels – is easy to remove thanks to magnetic clips and a slide-out system.Includedcomputer casefan x3 ManufacturerDarkFlashModelAIRNOVACase typeBig TowerMotherboard standardE-ATX, ATX, M-ATX, ITXPower supply standardATX (bottom mounting)Internal drive bays2x SSD, 2x HDD / 1x SSD + 1x HDDExpansion slots7Max power supply length200 mmMax graphics card length395 mmMax CPU cooler height175 mmMax number of fans10Fan mounting optionsFront: 3x 120 mm / 3x 140 mmTop: 3x 120 mm / 2x 140 mmRear: 1x 120 mm / 1x 140 mmBottom: 3x 120 mmWater cooling mounting optionsFront: 360 / 420 mmTop: 360 mmNumber of installed fans3Buttons and controlsPower, ResetConnectors2x USB 3.0, 1x USB Type-C Gen2 (10 Gbps), HD AudioColorBlackHeight538 mmWidth238 mmDepth464 mm
Mid-tower with panoramic view, supports GPUs up to 415 mm, CPU coolers up to 184 mm, compatible with motherboards up to E-ATX, featuring a back-connect design. With the Phanteks XT View Matrix, you can build a tidy, well-designed gaming PC. The case features two large tempered glass panels without a centre bar, offering an unobstructed view of your hardware. It supports modern components, such as E-ATX motherboards, large graphics cards, and a variety of fan and radiator options. Ideal for those seeking a clean setup: motherboards with rear connectors like ASUS BTF, MSI Project Zero, or GIGABYTE Project STEALTH are a perfect fit. The highlight is the integrated matrix display with 600 LEDs, which can be customised in many ways. Plenty of space for high-end hardware: Supports Mini-ITX to E-ATX Generous GPU compatibility: Graphics cards up to 415 mm in length Strong airflow: Up to nine fans and three radiators Panoramic view: Large glass surfaces without distracting bars 600-LED matrix: Displays, effects, and animations possible Phanteks XT View Matrix: Made for current gaming hardware The XT View Matrix PC case offers ample room for your dream setup: Mini-ITX to E-ATX boards fit easily inside, including motherboards with rear connectors. The 184 mm CPU cooler clearance allows for large air coolers. With seven PCIe slots and 415 mm of space for graphics cards, even large GPUs can be installed without any issues. A clear look through glass and clean cable management The glass front and side are completely frameless, providing a 270-degree view of your hardware. Smart cable management allows you to easily conceal all necessary cables, ensuring optimal airflow and a truly clean look. A special highlight is the integrated LED panel with 600 LEDs. Hidden behind a fabric surface, it displays system information, time, text, or animations, giving your PC a personalised touch. Great flexibility for fans and radiators You can install up to nine 120 mm fans and three radiators. Whether you prefer air or water cooling, your system can be tailored exactly to your needs. Strong cooling, perfect for high-performance hardware Top: Three 120 mm fans or two 140 mm fans / radiator up to 360 mm Side: Two 120 mm fans or 240 mm radiator (requires vertical GPU) PSU chamber: Three 120 mm fans for direct GPU ventilation Rear: 120 mm radiator or 120/140 mm fan This keeps your PC stable even under heavy load – whether using air or water cooling. NEXLINQ: Easy control for cooling & lighting The XT View Matrix is part of the Phanteks NEXLINQ system. With this, you can connect fans, coolers, and RGB lighting to a hub and conveniently control everything via software. Set automatic or custom fan curves and adjust your lighting colors – for quiet operation and a seamless appearance. Mid-tower with support for back-connect motherboards Additionally, motherboards from Mini-ITX to E-ATX – including models with back-connect such as ASUS BTF, MSI Project Zero, and GIGABYTE Project STEALTH are supported. This keeps the interior especially tidy. Modular I/O panel The I/O panel is located on the top of the case, allowing for perfect placement on your desk and providing easy access to ports.
Tootekood: DB330M WHITE +3FGTIN: 4711527001864Korpused
Darkflash DB330M computer case + 3 fans (white)The Darkflash DB330M is a small and stylish case designed for powerful configurations for office work and more. It is compatible with M-ATX and ITX motherboards and can accommodate graphics cards up to 305 mm in length. With its compact dimensions of 400 x 218 x 333 mm, it is perfect for places where space is at a premium, without compromising on functionality. The set also includes three ARGB fans.Effective coolingThe DB330M case is equipped with three ARGB fans, which not only provide optimal cooling, but also look great. Thanks to them, you can give your workstation an original, gaming character! In addition, numerous ventilation openings and vertical air channels guarantee optimal heat dissipation. Don't worry about your computer overheating! What's more, depending on your needs, the case can accommodate up to 5 fans or water cooling (240 mm at the top and 120 mm at the rear).Ample space for componentsDespite its compact dimensions, the DB330M offers space for a graphics card with a maximum length of 305 mm and CPU cooling up to 180 mm in height. It easily accommodates modern, high-performance components, making it the perfect choice for those building their first gaming and high-performance computers. But that's not all. The case offers four slots for graphics cards – you don't have to limit yourself to just one!Flexible drive installationThe case supports various SSD and HDD configurations – you can install one SSD and one HDD or two HDDs. This allows you to flexibly customize the system to your needs! Thanks to this, you don't have to worry about running out of space for your files.Several useful portsThe case offers one USB 2.0 port and one USB 3.0 port for fast data transfer. In addition, there is an audio jack socket for convenient connection of headphones or a microphone.Minimalist designThe DB330M case will not only allow you to build a powerful computer, but also decorate your workstation. It stands out with its minimalist, modern design with transparent panels. Combine it with RGB-backlit components for a unique visual effect! There are also numerous cable grommets to help you organize your cables. And if necessary, you can easily remove the left and right panels of the case – no additional tools are required. ManufacturerDarkflashModelDB330MCase typeMini TowerSide panelTempered glassMotherboard standardM-ATX, ITXPower supply standardATX at the bottomInternal drive bays3.5'HDD x2, 2.5'SSD x1Expansion card slots4Max power supply length240 mmMax graphics card length305 mmMax CPU cooler height180 mmMax number of fans5Fan mounting optionsTop: 120 mm x2/140 mm x2; Rear: 120 mm x1; Bottom: 120 mm x2Water cooling mounting optionsTop 240 mm; Side 120 mmNumber of fans installedNo fans installedFan typeNo fans installedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x1, HD AudioMaterial0.8 mm SPCCColorBlackHeight400 mmWidth218 mmDepth333 mmWeight5.3 kg
Tootekood: DB330M BLACK +3FGTIN: 4711527001871Korpused
Darkflash DB330M computer case + 3 fans (black)The Darkflash DB330M is a compact and stylish case designed for powerful configurations for office work and more. It is compatible with M-ATX and ITX motherboards and can accommodate graphics cards up to 305 mm in length. With its compact dimensions of 400 x 218 x 333 mm, it is perfect for places where space is at a premium, without compromising on functionality. The set also includes three ARGB fans.Effective coolingThe DB330M case is equipped with three ARGB fans, which not only provide optimal cooling, but also look great. Thanks to them, you can give your workstation an original, gaming character! In addition, numerous ventilation openings and vertical air channels guarantee optimal heat dissipation. Don't worry about your computer overheating! What's more, depending on your needs, the case can accommodate up to 5 fans or water cooling (240 mm at the top and 120 mm at the rear).Ample space for componentsDespite its compact dimensions, the DB330M offers space for a graphics card with a maximum length of 305 mm and CPU cooling up to 180 mm in height. It easily accommodates modern, high-performance components, making it the perfect choice for those building their first gaming and high-performance computers. But that's not all. The case offers four slots for graphics cards – you don't have to limit yourself to just one!Flexible drive installationThe case supports various SSD and HDD configurations – you can install one SSD and one HDD or two HDDs. This allows you to flexibly customize the system to your needs! Thanks to this, you don't have to worry about running out of space for your files.Several useful portsThe case offers one USB 2.0 port and one USB 3.0 port for fast data transfer. In addition, there is an audio jack socket for convenient connection of headphones or a microphone.Minimalist designThe DB330M case will not only allow you to build a powerful computer, but also decorate your workstation. It stands out with its minimalist, modern design with transparent panels. Combine it with RGB-backlit components for a unique visual effect! There are also numerous cable grommets to help you organize your cables. And if necessary, you can easily remove the left and right panels of the case – no additional tools are required. ManufacturerDarkflashModelDB330MCase typeMini TowerSide panelTempered glassMotherboard standardM-ATX, ITXPower supply standardATX at the bottomInternal drive bays3.5'HDD x2, 2.5'SSD x1Expansion card slots4Max power supply length210 mmMax graphics card length305 mmMax CPU cooler height180 mmMax number of fans5Fan mounting optionsTop: 120 mm x2/140 mm x2; Rear: 120 mm x1; Bottom: 120 mm x2Water cooling mounting optionsTop 240 mm; Side 120 mmNumber of installed fansNo fans installedFan typeNo fans installedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x1, HD AudioMaterial0.8 mm SPCCColorBlackHeight400 mmWidth218 mmDepth333 mmWeight5.3 kg
Striking, spacious PC case with glass front and side panel, plus stunning backlighting. The Krux Empero is perfect for anyone who values futuristic design as well as plenty of space for components and long radiators. With the Krux Empero case, you get not only a classic glass side panel, but also a fully glassed front. The tempered glass panels (side, front, and corner) are easy to remove without tools. The set includes four illuminated Krux 120 mm ARGB PWM fans with PWM speed control, which help maintain optimal operating temperatures while providing the entire unit with eye-catching lighting effects. Additionally, easily removable dust filters keep the interior free from dirt and debris. The included splitter for up to 6 fans not only controls fan operation and backlighting but also makes cable management easier. The Krux Empero PC case offers plenty of space for components, including full-size ATX motherboards (or smaller microATX and mini-ITX), GPUs up to 420 mm in length, tower CPU coolers up to 155 mm in height, power supplies up to 205 mm long, five storage drives, and AiO coolers with lengths of 120, 240, 280, and even 360 mm. The standard set of four 120 mm fans can be expanded to a total of ten fans. The I/O panel of the Krux Empero features a range of practical and functional ports. It includes a 3.5 mm combo audio jack (for headphones, speakers, and microphones), buttons to control power and LED backlighting, two standard USB-A ports, and a third, modern USB-C port.
The Viewport Mini in its elegant white version is a mini-tower case featuring front and side panels made of tempered glass, providing a panoramic view of the high-performance interior components. It supports Micro ATX and Mini-ITX motherboards and offers advanced cooling options with 7 fan slots and liquid cooling support for 240/280 mm and 120 mm radiators. The included ARGB fans draw air through mesh ventilation to optimize airflow. Ideal for gaming and high-performance applications, it accommodates GPUs up to 355 mm and CPU coolers up to 165 mm.
DarkFlash DS950 computer case with display (white) + 6 fansDo you dream of a PC that stands out from the crowd and attracts attention? Use the Darkflash DS950 computer case with display! The 270° panoramic design with two tempered glass panels allows you to showcase your components, and the 6-inch IPS screen adds an extra element of personalization – you can display system information or your own photos or videos on it. Give your configuration a unique character! What's more, the spacious interior measuring 450 × 222 × 465 mm can easily accommodate ATX, Micro-ATX, and ITX motherboards, as well as modern components, including graphics cards up to 400 mm long and CPU coolers up to 180 mm high. This allows you to easily build a powerful computer for gaming or work. The set also includes 6 fans.270° panoramic designThe case is equipped with two transparent tempered glass panels that provide a panoramic view of the interior. The vertical-profile-free design allows you to showcase your computer components in an interesting way – for example, a set of RGB-backlit fans or water cooling with a display. Create an original configuration and show everyone that you can also be creative when building a PC!Integrated IPS display – express yourselfA distinctive feature of this case version is the built-in 6-inch IPS screen with a resolution of 480 × 960. You can display your own content (in JPG, PNG, or MP4 formats) or selected system information, such as CPU and GPU temperatures. Express yourself and be sure that your PC is one of a kind! It's a great option for gamers, streamers, and more.Efficient ventilation and extensive cooling capabilitiesThe DS950 offers an extensive ventilation system based on dense meshes that are responsible for effectively dissipating heat from inside the case. What's more, the design allows for the installation of up to 9 fans or 240/280/360 mm water cooling in the upper part. This prevents the computer from overheating, even during intensive work.Space for powerful componentsCreate a configuration that perfectly suits your needs. The DS950 case allows for the installation of graphics cards up to 400 mm in length and CPU coolers up to 180 mm in height. There is also space for one SSD or two HDDs, allowing for flexible data storage configuration. Also noteworthy is its compatibility with ITX, M-ATX, and ATX motherboards. The spacious interior allows for easy installation and replacement of components, so you can easily build a powerful computer for gaming or work.Convenient access to ports and buttonsThe case is equipped with various connectors that are useful in everyday work. You have USB-A 2.0, USB-A 3.0, and USB-C 3.2 Gen 2 ports at your disposal, allowing you to transfer files at speeds of up to 10 Gbit/s. There is also an HD Audio jack, a reset button, and a power button.Quick panel removal and dust protectionThe DS950 is designed to provide convenient access to the interior and allow for easy upgrades. The side panels use a snap-fit quick-release mechanism that allows them to be removed efficiently without the use of tools, and additional hand-tightened screws increase the stability of the structure. The whole is complemented by magnetic dust filters, which limit the ingress of contaminants into the interior and make it easier to keep the components clean. ManufacturerDarkFlashModelDS950VCase typeMidi towerSide panelTempered glassMotherboard standardATX / M-ATX / ITXPower supply standardATXInternal drive baysSSD x1 / HDD x2Expansion card slots7Max power supply length200 mmMax graphics card length400 mmMax CPU cooler height180 mmMax number of fans9Fan mounting optionsTop: 120 mm x3 / 140 mm x2Side: 120 mm x2Rear: 120 mm x1Bottom: 120 mm x3Water cooling mounting optionsTop: 360 mm / 280 mm / 240 mmRear 120 mmNumber of installed fans6Fan type120 mmButtons and controlsPower, ResetConnectorsUSB-C 3.2 Gen 2 x1, USB-A 3.0 x1, USB-A 2.0 x1, HD AudioMaterial0.5 mm SPCCColorWhiteHeight465 mmWidth222 mmDepth450 mmWeightApprox. 6.5 kg
DarkFlash DS950 computer case with display (black) + 6 fansDo you dream of a PC that stands out from the crowd and attracts attention? Use the Darkflash DS950 computer case with display! The 270° panoramic design with two tempered glass panels allows you to showcase your components, and the 6-inch IPS screen adds an extra element of personalization – you can display system information or your own photos or videos on it. Give your configuration a unique character! What's more, the spacious interior measuring 450 × 222 × 465 mm can easily accommodate ATX, Micro-ATX, and ITX motherboards, as well as modern components, including graphics cards up to 400 mm long and CPU coolers up to 180 mm high. This allows you to easily build a powerful computer for gaming or work. The set also includes 6 fans.270° panoramic designThe case is equipped with two transparent tempered glass panels that provide a panoramic view of the interior. The vertical-profile-free design allows you to showcase your computer components in an interesting way – for example, a set of RGB-backlit fans or water cooling with a display. Create an original configuration and show everyone that you can also be creative when building a PC!Integrated IPS display – express yourselfA distinctive feature of this case version is the built-in 6-inch IPS screen with a resolution of 480 × 960. You can display your own content (in JPG, PNG, or MP4 formats) or selected system information, such as CPU and GPU temperatures. Express yourself and be sure that your PC is one of a kind! It's a great option for gamers, streamers, and more.Efficient ventilation and extensive cooling capabilitiesThe DS950 offers an extensive ventilation system based on dense meshes that are responsible for effectively dissipating heat from inside the case. What's more, the design allows for the installation of up to 9 fans or 240/280/360 mm water cooling in the upper part. This prevents the computer from overheating, even during intensive work.Space for powerful componentsCreate a configuration that perfectly suits your needs. The DS950 case allows for the installation of graphics cards up to 400 mm in length and CPU coolers up to 180 mm in height. There is also space for one SSD or two HDDs, allowing for flexible data storage configuration. Also noteworthy is its compatibility with ITX, M-ATX, and ATX motherboards. The spacious interior allows for easy installation and replacement of components, so you can easily build a powerful computer for gaming or work.Convenient access to ports and buttonsThe case is equipped with various connectors that are useful in everyday work. You have USB-A 2.0, USB-A 3.0, and USB-C 3.2 Gen 2 ports at your disposal, allowing you to transfer files at speeds of up to 10 Gbit/s. There is also an HD Audio jack, a reset button, and a power button.Quick panel removal and dust protectionThe DS950 is designed to provide convenient access to the interior and allow for easy upgrades. The side panels use a snap-fit quick-release mechanism that allows them to be removed efficiently without the use of tools, and additional hand-tightened screws increase the stability of the structure. The whole is complemented by magnetic dust filters, which limit the ingress of contaminants into the interior and make it easier to keep the components clean. ManufacturerDarkFlashModelDS950VCase typeMidi towerSide panelTempered glassMotherboard standardATX / M-ATX / ITXPower supply standardATXInternal drive baysSSD x1 / HDD x2Expansion card slots7Max power supply length200 mmMax graphics card length400 mmMax CPU cooler height180 mmMax number of fans9Fan mounting optionsTop: 120 mm x3 / 140 mm x2Side: 120 mm x2Rear: 120 mm x1Bottom: 120 mm x3Water cooling mounting optionsTop: 360 mm / 280 mm / 240 mmRear 120 mmNumber of installed fans6Fan type120 mmButtons and controlsPower, ResetConnectorsUSB-C 3.2 Gen 2 x1, USB-A 3.0 x1, USB-A 2.0 x1, HD AudioMaterial0.5 mm SPCCColorBlackHeight465 mmWidth222 mmDepth450 mmWeightApprox. 6.5 kg
- Solid crafted aluminium case- Fanless CPU cooling design- Designed for thin mini-ITX motherboard- Suitable for VESA mounting- Recommended max CPU TDP 35W- 120W power adapter included ( AK-ITX05-BK12 only )KujutegurITX-TowerTüüpPCMaterjalAlumiiniumEmaplaadi toetatud kujuteguridMini-ITXToote värvMustAknagaEi2,5" salvede arv1Kaasas toiteplokkJahToiteallikas120 WToiteploki asukohtVälineLaius228 mmSügavus187 mmKõrgus61 mmKaal2,2 kg
Beautifully crafted and engineered to maximize cooling potential with its amazing expansion flexibiltiy, the Enthoo Pro is the budget friendly mid-tower from Phanteks. Embracing many features from the Enthoo Primo, without the price tag. This case has mulitple radiator support, removable ssd bracket, closed HDD panel, and velcro cable management. The Enthoo Pro, trying to establish its own solid reputation like the award winning Enthoo Primo.Features:Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks’ new redesigned and better performing SP series fans. Budget friendly case, Phanteks’ Enthoo Pro, unleash unlimited possibilities.KujutegurFull-TowerTüüpPCMaterjalPlast, Teras5,25" lahtrite arv33,5" lahtrite arv6Emaplaadi toetatud kujuteguridATX,EATX,Micro-ATXToote värvMustAknagaEi2,5" salvede arv7Sisemiste 3,5" salvede arv6Väliste 5,25" kettalahtrite arv3SobilikMängimineLaienduspesade arv8CPU jahuti maksimaalne kõrgus19,3 cmGraafikakaardi maksimaalne pikkus47,2 cmKaasas toiteplokkEiUSB 2.0 portide arv2USB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendJahAudioväljundJahInstallitud esiventilaatorid1x 200 mmMaksimaalne esiventilaatorite arv2Toetatud esiventilaatorite läbimõõt120,140,200 mmMaksimaalne tagaventilaatorite arv1Toetatud tagaventilaatorite läbimõõt120,140 mmMaksimaalne ülemiste ventilaatorite arv3Toetatud ülemiste ventilaatorite läbimõõt120,140,200 mmMaksimaalne alumiste ventilaatorite arv2Toetatud alumiste ventilaatorite läbimõõt120,140 mmVentilaatori kiirus1200VedelikjahutusJahToetatud eesmise radiaatori ventilaatori suurused240 mmToetatud tagumise radiaatori ventilaatori suurused140 mmToetatud ülemise radiaatori ventilaatori suurused420 mmToetatud kõvakettasuurused2.5"Laius235 mmSügavus550 mmKõrgus535 mmKaal11,4 kgPakendi kaal13,3 kgMüratase19 dB
Tootjakoduleht: http://kolink.eu/Home/case-1/midi-tower-2/observatory-lite.html Mõõtmed: 190 x 440 x 400 mm (L x K x S) Kasti mõõtmed: 258 x 498 x 440 mm (L x K x S) Materjal: Teras, karastatud klaas, plastik Pakend: EPE vaht Kaal: umbes 5,5 kg Värv: must Kujutegur: ATX, Micro-ATX, Mini-ITX Võimalikke fänne kokku: 3x 120 mm (ees) 2x 120 mm (katus) 1x 120 mm (taga) Eelinstallitud: 3x 120 mm (ees) ARGB LED 1x 120 mm (taga) ARGB LED Radiaatori kinnitus: 1x 280 mm (ees) Filter: katus, põhi Sõidupesad: 2x 3,5 / 2,5 "(sisemine) 3x 2,5 "(sisemine) PSU: 1x tavaline ATX (valikuline) Laienduspesad: 7 I / O-paneel: 2x USB 2.0 (sisemine ühendus) 1x USB 3.0 (sisemine ühendus) 1x heli sisse / välja RGB / lähtestamise lüliti GPU maksimaalne pikkus: 335 mm (AIO kasutamisel 310 mm) Maksimaalne protsessori jahuti kõrgus: 160 mm Maksimaalne PSU pikkus: 180 mm
Internal 2x 2.5 "/ 3.5" (cross, drive rails), 2x 2.5 ", Front I / O 1x USB-A 3.0, 2x USB-A 2.0, 1x headphones, 1x microphone, PCI slots 7, Fan (front) 2x 120mm or 3x 120mm (optional), Fan (rear) 1x 120mm, Fan (top) 2x 120mm (optional), Fan (other) 2x 120mm (optional), Radiator sizes 120 / 240mm front, Motherboard up to ATX, Power supply ATX (max 180mm deep), Power supply position below, CPU cooler up to max. 156mm height, Graphic cards up to max. 330mm, Color black, inside black, Dimensions (WxHxD) 189x451x412mm, Volume 35.12l, Weight 4.00kg, Special features cable management, dust filter, W/O PSU
Experience the gaming case 803B from LC-Power! Shaded X offers you a lot of features and a great variety of system configurations for ATX, Micro ATX and Mini ITX systems!
Unique Design & Powerful Heat Dissipation The AX90 features a unique mesh front panel design and excellent cooling performance. The full-view tempered glass side panel design allows you to show off your gaming configurations without any obstacles. 11 x 120mm fans can be installed simultaneously.
Wall-mountable showcase case, ATX form factor, designed for custom water cooling, vertical GPU mounting, radiator up to 360 mm, graphics cards up to 400 mm in length.
