Minimalist mini-tower, includes one Mercury AM120S fan, supports up to five fans, accommodates GPUs up to 340 mm / CPUs up to 162 mm in height, supports up to three drives, radiator up to 240 mm, 1x USB-C / 2x USB-A
The DIGITUS wall-mounted data communications cabinet is equipped with a glazed door and a cable gland in the roof and floor. The steel structure is made of steel sheet up to 1.5 mm thick. It is possible to change the side of the door hinges and adjust the depth. The rack cabinets are delivered unassembled, in a flat package. Assembly is carried out in a few simple steps thanks to the enclosed "step-by-step" instructions. Installation cabinet supplied unassembled Quick installation Door opening angle: 200° 1-point locking on front door 483 mm (19") rack profiles mounted at the front inside the cabinet, galvanized 483 mm (19") rack profiles with depth adjustment 1.1-1.5 thick, high-strength sheet steel, powder-coated Cable inlet with brush strip in the roof and plastic cover in the floor Ventilation slots for active and passive air supply and exhaust Front door: glass, single Side panels: on two sides Assembled: no
Versatile midi-tower, front and side panel made of tempered glass, large mesh areas on the left side panel and top, 2x 140mm & 1x 120mm ARGB PWM fans pre-installed, GPU length of up to 420mm, CPU cooler height up to 175mm
Showcase your hardware perfectly with the Phanteks Evolv S2 PC case. The spacious panoramic design with glass front and sides always gives you a clear view of your components—ideal for eye-catching builds with RGB lighting and custom water cooling. Black midi-tower with panoramic design Efficient cooling options with up to seven fans and radiator support up to 360 mm Supports motherboards up to E-ATX size with back-connect design Space for graphics cards up to 395 mm and CPU coolers up to 175 mm in height Clean look thanks to hidden cabling Four integrated RGB fans Phanteks Evolv S2: Midi-tower with panoramic design The Phanteks Evolv S2 midi-tower offers the perfect balance between size and functionality. With ample space for powerful hardware and efficient cooling, it’s the ideal choice for gaming and workstation builds. Optimal cooling with fans and radiators To keep your hardware cool under any load, the Phanteks Evolv S2 can accommodate up to seven fans. The top and bottom each support the installation of three 120 mm fans, while the rear can hold a 120 mm fan. To get you started, four 120 mm fans are already pre-installed—three at the bottom and one at the rear. If you prefer water cooling—whether AiO or custom—you can also install a radiator. The top supports a radiator up to 360 mm in size. Installing your hardware The case supports the installation of graphics cards up to 395 mm in length. Motherboards up to E-ATX format are supported. The new back-connect design motherboards are also compatible, allowing for clean cable management and an upgraded setup. The CPU cooler should not exceed 175 mm in height. Up to four drives can be installed to store your programs and games.
Especially with compact cases equipped with powerful gaming hardware, the focus should be on optimal cooling. With the Meshlicious, Lian Li's subsidiary Ssupd (Sunny Side Up Design), in collaboration with Ncase, presents an exceptionally small Mini-ITX case whose front, top, and side panels are all made entirely of fine mesh, ensuring virtually unobstructed airflow. The interior is also extremely versatile thanks to its clever design. Graphics cards up to 4 slots high can be installed behind a Mini-ITX motherboard. There is also space for large radiators and numerous data drives, which can be powered by either an SFX or ATX power supply — all in a volume of just 14.67 liters. The features of the Ssupd Meshlicious Full Mesh PCIE 5.0 Edition Mini-ITX Case: Extremely compact Mini-ITX case for high-performance gaming hardware Front, top, and side panels made from fine mesh for optimized airflow Supports GPUs up to 4 slots high and 336 mm long Space for two 140 mm fans or a 280 mm radiator at the front Includes a PCIe 5.0 riser card Compatible with ATX or SFX format power supplies Room for up to two 3.5-inch or seven 2.5-inch drives I/O panel with USB-C 3.1 and USB 3.0 Type-A Ssupd Meshlicious: Simple but functional design Externally, the Ssupd Meshlicious stands out at first glance due to its particularly compact SFF format and its extensive mesh panels. The top, front, and both side panels are made from fine mesh, which provides ample fresh air intake while also being light-permeable. All panels can be easily removed thanks to four pins on each, making the installation of high-end gaming hardware easier. The minimalist I/O panel on the lid features a USB-C 3.1 port, a USB 3.0 Type-A port, and an LED-lit power button. The motherboard connections are accessible as usual from the back of the case. On the inside, the Ssupd Meshlicious proves to be highly adaptable. Those who prefer a powerful gaming setup can install a graphics card up to 4 slots high and 336 mm long vertically behind the motherboard tray. Ssupd provides a PCIe 5.0 riser card for this purpose. The GPU ports then face downward and are accessible via an opening. The cable connections must be angled, and an appropriate HDMI cable is included. Versatile and thoughtfully designed In this configuration, the front can accommodate up to two 140 mm fans or a 280 mm radiator. There is 53 mm of space for CPU coolers, as the motherboard tray can be repositioned. By reducing the GPU height to three or two slots, the motherboard tray can be moved back to make room for CPU coolers up to 73 mm high. Alternatively, a compact 2-slot graphics card of up to 211 mm in length can also be installed horizontally, though this comes at the expense of the front radiator. Below it, a provided bracket can be attached to hold two 3.5-inch or four 2.5-inch drives. When using an optional power supply, you can choose between ATX, SFX, or SFX-L formats. The latter frees up space for another 2.5-inch drive. At the bottom, in both configurations, two 2.5-inch drives can be installed in this versatile and stylish Mini-ITX case.
We create solutions that count every dayThe 2.5" SSD or HDD adapter is an extremely practical tool for anyone looking for mobility and quick access to stored data. It allows you to quickly and efficiently access your data wherever you are, making it extremely helpful not only for people who store important documents or private files on drives, but also for small businesses who want to achieve the same benefits without having to invest in other expensive solutions. It's not just about 5Gb/s speed, it's also about convenience - one device, one USB cable, 2TB capacityWith a data transfer rate of 5Gb/s, you can access your files in no time. Whether you're working or enjoying multimedia, this enclosure enables the smooth transfer of information, enhancing the performance of your system.Our device offers: compatibility with multiple Windows and Mac, Linux systems, suitable for SSD and HDD disk 2.5", USB-C interface supports data transfer rates of up to 5 Gb/s, a single drive supports up to 2TB, useful when there is no other way to connect an SSD or HDD, USB-C cable made of the highest quality flexible material, which guarantees not only durability but also comfort of use, no need to install drivers, simply plug into a USB port and use thanks to the simplicity of the Plug&Play function. Maximum mobility in an elegant aluminium housingSleek and handy adapter for your drive is a stylish protection for your valuable data. The compact size of the adapter will allow you to take it with you to work or other places, the pocket fits easily into a backpack. Reliability, convenience and functionality - you will find it all in this unique product. Convenient and Universal Solution for SSD and HDDNo special tools are needed to mount the SSD or HDD disk, simply slide out the case, insert the drive accordingly and slide it back into the case and screw it on. Once you have connected the bay to the device of your choice, you are good to go, the device is ready to go. Plug&Play function - no drivers to install, just plug and play!
Transform the ambiance of any system with the CORSAIR LS350 Aurora RGB lighting kit. Featuring two 35 cm RGB LED strips, this kit illuminates with vibrant colors to create a visually stunning setup. The magnetic installation simplifies positioning, while the included iCUE to ARGB adapter cable and 40 cm 3-pin extension cables ensure a seamless connection. Compatible with ASUS Aura Sync, GIGABYTE RGB Fusion 2.0, ASRock Polychrome Sync, and MSI Mystic Light, the LS350 is designed to mesh with popular RGB ecosystems. With 40 RGB LEDs in each strip, customize the lighting to match personal style or synchronize it with other components for an enhanced gaming experience.
Lenkrad-Basis für Racing-Simulatoren, realistische Bewegungen durch 25 Nm starken Motor, verzögerungsfreie Wiedergabe, Quick-Release für Lenkräder, fast vollständig aus Metall
