Small case for simple systems Two fans installed Supports ITX size motherboards and CPU cooler height up to 38 mm Up to four 2.5-inch SSDs possible Power supply: 1U Flex up to 150 mm The Jonsbo N10 in detail The Jonsbo N10 is a small case that can be placed on the desk due to its light weight and fits into any setup thanks to its simple silver design. Cooling The mini-tower already comes with two small fans installed, providing sufficient cooling. Additional fans cannot be installed. For this reason, the tower does not support the installation of graphics cards, as these require more cooling. Nevertheless, a processor with integrated graphics can be installed without any problems. Hardware options The mini-tower supports the installation of ITX size motherboards. The CPU cooler should not exceed a height of 38 mm. To store programs and games, up to four 2.5-inch SSDs can be installed. For the power supply, note that only a 1U Flex power supply is possible, which should not exceed 150 mm in length.
LANCOOL III Mid-tower modular chassis for all kinds of configurations Equipped with 4 × 140 PWM fans (ARGB or non-RGB) Featured airflow optimized mesh structure and hinged side panels Supports up to 420 radiator or 3 x 360 radiators and a maximum of 10 fans Offers 12 storage drives mounting locations Upgraded cable management solution for a clean build
The SCORPION III is the next iteration of the highly successful Scorpion gaming case by CHIEFTEC. Upgrading all four Ring Fans from the Scorpion 2 to full Rainbow Fans from our Tornado fan set, the Scorpion 3 shines in a brand-new light. An additional upgrade is the easy-install tempered glass panel. The innovative slide-to-open mechanism with thumbscrews in the back allows for the tempered glass side panel to be easily removed and installed. With these innovative new features, while building on the highly commended quality and feature set from the Scorpion case, the Scorpion 3 takes gaming by CHIEFTEC to yet another level. 4x 120mm A-RGB Rainbow fans pre-installed 2x tempered glass panels (front & side) 3PIN +5V A-RGB M/B Sync via RGB control hub Clean cable management options USB 3.2 Gen2x2 Type-C Connector
• Perfectly symmetrical design allows for omnidirectional placement. • Quad 160mm PWM fan support with flexible intake modes. • Integrated base compartment revolutionizes zero-visibility cable management. • Sliding rail system allows for IO module relocation and expanded port array. • Natural alignment of vertically mounted GPU with gravity reduces risk of damage from displacement. • Accommodates a maximum GPU length of 380mm. • Compatible with reverse connector motherboards. • Magnetic dust filter panel and quick release cable management compartment covers make maintenance a breeze.
The Phanteks XT M3 impresses with a space-saving design that offers you more than enough room for high-end components. With effective cooling and tidy cable management, this case is suitable for everyone—whether you are a casual gamer or an enthusiast. Compact Size: Space-saving case for high-end hardware Effective Cooling: Space for up to nine fans Large Radiator: Supports installation of a 360 mm radiator on the top panel Organized Build: Space for neat cable management Back-Connect Support: Compatible with motherboards featuring back-connect design The Phanteks XT M3: Sleek mini case for your gaming setup Show off your gaming hardware with the Phanteks XT M3—a compact SFF case designed for greatness. Compatible with high-end graphics cards and motherboards with back-connect design, this tower is ready for your modern setup. Phanteks XT M3 case with fans Effectively cooled with fans and radiator The Phanteks case supports the installation of up to nine fans, keeping your build cool under any workload. You can mount three fans on the bottom, directly below the graphics card, to provide extra cooling for your GPU. A 360-mm radiator can also be mounted on the top if you prefer water cooling. In addition to fans and a radiator, the mesh front panel ensures excellent airflow, reducing heat buildup inside your case. Your new gaming PC with clean cable management Laying out cables neatly is not always easy—but with the Phanteks XT M3, cable management becomes effortless. Cutouts in just the right places allow for tidy cable routing. Combined with support for motherboards with a back-connect design, you get an organized build that not only looks great but also improves airflow. Mini-ITX case built for powerful hardware Even a large graphics card fits in easily—the case provides space for a GPU up to 430 mm long. Note that you cannot install fans at the front if you utilize the full length. The CPU cooler should not exceed 175 mm in height, and the power supply should be no longer than 150 mm.
The Phanteks XT M3 impresses with a space-saving design that offers you more than enough room for high-end components. With effective cooling and tidy cable management, the case is suitable for everyone—whether you’re a casual gamer or an enthusiast. Compact size: Space-saving case for high-end hardware Effective cooling: Space for up to nine fans Large radiator: Supports installation of a 360 mm radiator on the top Tidy build: Room for excellent cable management Back-connect support: Compatible with motherboards featuring back-connect design The Phanteks XT M3: Sleek mini-case for your gaming setup Show off your gaming hardware with the Phanteks XT M3—a compact SFF case built for big things. Compatible with high-end graphics cards and motherboards supporting back-connect design, this tower is ready for your modern setup. Phanteks XT M3 Case Effectively cooled thanks to fans and radiator The Phanteks case supports the installation of up to nine fans—for a cool build under any load. Three fans can be mounted at the bottom, directly under the graphics card, providing extra cooling for your GPU. Additionally, a 360-mm radiator can be fitted on top if you prefer water cooling. Besides fans and a radiator, the mesh front also ensures very good airflow. This helps prevent hot air from accumulating inside your case. Your new gaming PC with clean cable management Managing cables neatly is not easy—but with the Phanteks XT M3, cable management is a breeze. Cutouts in the right places make it easy to route cables cleanly. Combined with support for motherboards with back-connect design, you get a tidy build that not only looks good but also improves airflow. Mini-ITX case built for powerful hardware Even a large graphics card fits in effortlessly—the case offers space for a GPU up to 430 mm in length. Note that you cannot install fans at the front if you use the maximum GPU length. The CPU cooler should not exceed a height of 175 mm, and the power supply should not be longer than 150 mm.
PC case Mars MC-XO ATX FRGB fan black The MC-XO is an ATX semi-designed for those who seek the perfect balance between performance and aesthetics. With an optimized design for refrigeration, it incorporates a 120mm rear FRGB fan, a double-chamber system for efficient thermal management and the innovative Sidecool system, which maximizes the side air flow without compromising clean aesthetics and sophisticated from the box. Its modern and functional design makes it an ideal choice for game and professional setups.
Micro-ATX case, innovative front-mounted power supply, supports GPUs up to 430mm, space for up to seven 120mm fans, separate radiator chamber, glass panels on the front and side, includes three 120mm reverse fansThe Phanteks XT V3 combines compact design with ample room for modern hardware. With stylish glass panels and powerful cooling, your gaming setup becomes a true showcase. Compact Micro-ATX case: ideal for modern builds Ample space: supports GPUs up to 430mm in length Optimized for cooling: up to seven 120mm fans or a 360mm radiator Compatible: with back-connect motherboards Showcase design: tempered glass panels on the front and side The Phanteks XT V3: Compact Mini Case with Plenty of Space Phanteks XT V3 Case Thanks to its compact form factor, the Phanteks XT V3 can be easily integrated into a wide range of gaming or professional setups—while still providing excellent support for modern hardware. The spacious interior offers room for Mini-ITX and Micro-ATX motherboards and supports back-connect motherboards. Additionally, high-performance graphics cards fit with ease, as the Phanteks XT V3 features four PCIe slots and accommodates GPUs up to 430mm. The rear chamber of the case also impresses with an innovative design for premium hardware. Instead of the usual position, the power supply has been relocated to the top front. This allows the Phanteks XT V3 to support full-sized ATX power supplies, providing even greater compatibility. Powerful Cooling Phanteks XT V3 The Phanteks XT V3 delivers outstanding cooling performance. There are seven mounting points for 120mm fans – three at the top, three at the bottom, and one at the rear – allowing for efficient airflow configurations. Out of the box, three powerful M25-120 reverse DRGB fans are pre-installed at the bottom, ensuring strong cooling. Additionally, the Phanteks XT V3 features a dedicated top chamber for a 360mm radiator. This makes it easy to install a powerful AIO cooler, keeping even high-end CPUs reliably cool during intense gaming sessions. Showcase Case Phanteks XT V3 With the Phanteks XT V3, you can display both your hardware and your building skills. The rear chamber provides plenty of space for cable management along with smart routing options for a clutter-free system. Completing the look are tempered glass panels on the front and side, giving you an unobstructed view of your components from every angle. Comprehensive I/O Panel Phanteks XT V3 The Phanteks XT V3 provides outstanding support for your gaming setup, thanks to the front I/O panel located at the bottom right. Here, you’ll find both a USB Type-A and Type-C port with USB 3.2 Gen 2x2 standard. Additionally, a 3.5mm combo audio jack is available for connecting your gaming headset.
Volcano Space XL Full Tower Case white Youre investing in a top-tier processor, a powerful graphics card, fast RAM, and a solid motherboard, so why would you hide them from yourself and other household members? The MODECOM Volcano Space XL Full Tower is a case designed so that your computer can finally look truly impressive. The front and side tempered-glass panels create a full visual showcaselike hardware displayed in a glass cabinet. Every detail, every ARGB effect (if you install illuminated fans), and every line of your configuration is visible and highlighted by this majestic chassis. MODECOM Volcano Space XL was designed for those who love personalization and perfect internal cable management, while also needing a spacious Full Tower case. Support for motherboards with reversed connectors allows you to build a modern interior without having to expose cables. Thanks to snap-on panels, you gain quick access to the inside. Installing components, upgrading hardware, and cleaning the interior become even easier. The spacious interior gives you full freedom: large E-ATX boards, robust water cooling (up to 420 mm), long graphics cards, and all the components you need for your gaming setup. With the MODECOM Volcano Space XL, your computer will know no limitsand it will look exactly the way it deserves. If you love technology, need plenty of room for expansion, and want your hardware always within sight, the MODECOM Volcano Space XL Full Tower is made for you. Especially in the Volcano Space XL NF version, which gives you complete freedom to configure cooling according to your preferences, as it comes without pre-installed fans. Because bigger can do more.
Volcano Space XL Full Tower Case black Youre investing in a top-tier processor, a powerful graphics card, fast RAM, and a solid motherboard, so why would you hide them from yourself and other household members? The MODECOM Volcano Space XL Full Tower is a case designed so that your computer can finally look truly impressive. The front and side tempered-glass panels create a full visual showcaselike hardware displayed in a glass cabinet. Every detail, every ARGB effect (if you install illuminated fans), and every line of your configuration is visible and highlighted by this majestic chassis. MODECOM Volcano Space XL was designed for those who love personalization and perfect internal cable management, while also needing a spacious Full Tower case. Support for motherboards with reversed connectors allows you to build a modern interior without having to expose cables. Thanks to snap-on panels, you gain quick access to the inside. Installing components, upgrading hardware, and cleaning the interior become even easier. The spacious interior gives you full freedom: large E-ATX boards, robust water cooling (up to 420 mm), long graphics cards, and all the components you need for your gaming setup. With the MODECOM Volcano Space XL, your computer will know no limitsand it will look exactly the way it deserves. If you love technology, need plenty of room for expansion, and want your hardware always within sight, the MODECOM Volcano Space XL Full Tower is made for you. Especially in the Volcano Space XL NF version, which gives you complete freedom to configure cooling according to your preferences, as it comes without pre-installed fans. Because bigger can do more.
PC case Mars MC-INFINIOLITE ATX black The MC INFINIOLITE brings Mars Gaming's "infinity" design to a more accessible form factor, maintaining the premium aesthetics and dual-chamber structure of the INFINIOLITE model, but leaving you total freedom to choose your own cooling. Its frameless continuous curved tempered glass, combined with the glass top panel, offers a spectacular panoramic view of the interior, ideal for gaming or content creation setups looking to excel in both performance and image.
Die North XL Momentum Edition ist eine neue, leistungsorientierte Version des ikonischen North-Gehäuses und ermöglicht verbesserte Kühlung direkt ab Werk. Das charakteristische offene Holzfront-Design und die fein gemusterte Mesh-Belüftung werden durch drei leistungsstarke Momentum-14-Lüfter mit LCP-Lamellen für einen leisen und effizienten Luftstrom ergänzt. Eine Front aus geschwärzter Eiche in Kombination mit dunklen Metallakzenten erzeugt eine stimmige, komplett schwarze Optik, die sich nahtlos in jedes Gaming-Setup einfügt. Im Innenraum bietet das geräumige und durchdachte Layout des Gehäuses Unterstützung für Grafikkarten bis zu 413 mm Länge oder bis zu 380 mm bei Verwendung eines 420-mm-Frontradiators. Dadurch ist das North XL Momentum Edition die ideale Basis für leistungsstarke Gaming-Systeme.
Neli eelinstallitud võimsat ventilaatorit • Toetab kuni 412 mm pikkuseid graafikakaarte • Rohkelt kaablite haldamise ruumi ja kinnitustarvikuid • Tööriistavaba ligipääs eemaldatavate klaaspaneelide kaudu • Rohkelt salvestusruumi 3,5" ja 2,5" draividele
The Krux Helio is a compact microATX case featuring a modern design with dark wood accents on the front, inspired by the Palum model. Its appearance makes it a great fit for offices, living rooms, or gaming setups. Despite its small size, it offers space for up to eight 120mm fans (three at the front, two at the bottom, two at the top — 140mm also possible — and one at the rear), and it comes with a 120mm PWM fan pre-installed at the back. A tempered glass side panel provides a view of the interior, while rounded edges emphasize its modern look. Thoughtfully designed dust filters and an easily removable front panel simplify cleaning and fan installation. Inside, it accommodates graphics cards up to 320mm, power supplies up to 170mm, and CPU coolers up to 175mm. There are also mounts for two 3.5" and one 2.5" drives, as well as radiator support up to 280mm. The I/O ports are located on the lower side and include USB-C 2.0, USB-A 3.0, a 3.5mm combo audio jack, as well as power and reset buttons — especially convenient if the case is placed on a desk.
The Viewport Mini, in its elegant black version, is a mini-tower case featuring front and side panels made of tempered glass, providing a panoramic view of the high-performance interior components. It supports Micro ATX and Mini-ITX motherboards and offers advanced cooling options with 7 fan slots and liquid cooling compatibility for 240/280 mm and 120 mm radiators. The included ARGB fans draw air in through mesh ventilation to optimize airflow. Ideally suited for gaming and high-performance applications, it accommodates GPUs up to 355 mm and CPU coolers up to 165 mm.
The Lian Li O11 Vision-M is a compact mATX PC case for current hardware and a visually appealing showcase build. Thanks to the dual-chamber design, the power supply, drives, and cables stay in the second chamber, while the front gives you an unobstructed view of the motherboard, graphics card, and your coolers. Three tempered glass panels create a panoramic look without a distracting support bar blocking the view.mATX dual-chamber PC case: Clean build with separate chamberTriple tempered glass: Front, side, and top with lock-and-key mechanismGPU and slot freedom: 5 PCIe slots and graphics cards up to 410 mm longAirflow & water cooling: Up to 12 fans and a 240/360 mm radiator in the topCustomizable design: Custom layout, cover for screen/LCD, STL file for 3D printing a dividerLian Li O11 Vision-M mATX case: Room for Mini-ITX, Micro-ATX, and high-end GPUsO11 Vision-M frontDespite its compact size, the O11 Vision-M offers space for Mini-ITX and Micro-ATX motherboards. With five PCIe slots, there is enough room for a large graphics card. Even long custom designs are no problem: GPUs up to 410 mm in length are supported. In the second chamber, you can install an ATX power supply up to 182 mm. There is also space for up to three drives there - ideal for keeping the power supply, storage, and cables out of sight.Triple tempered glass PC case: Panoramic showcase with lock-and-keyGlass on the front, side, and topThe front, side, and top are made of tempered glass. The panels are locked together via a lock-and-key mechanism and do not require any additional support in the corner. This gives the interior an open look and provides a clear view of your components.To prevent heat buildup despite the glass top, it features a large mesh cutout. This area is designed to reliably vent warm air upward - especially useful with fans or a radiator mounted in the top.240/360 mm radiator in the top and thoughtful tube routing for AiOsThere is space in the top for a 240 mm or 360 mm radiator. The radiator mount offers integrated tube routing, allowing you to run the tubes of your AiO upward and over the motherboard. This keeps the GPU, RAM, and showcase area free of tubes running across them.Airflow in the Lian Li O11 Vision-M: Up to 12 fans for powerful coolingUp to 12 fans in total (distributed across the main and rear chamber)Top: 3x 120 mm (or 240/360 mm radiator)Bottom: 3x 120 mmSide: 2 fan mountsRear: 2 fan mountsFor cooling your hardware, the O11 Vision-M relies on numerous mounting points and a sensible fan layout. At the bottom, you can use 3x 120 mm as intake to feed fresh air directly to the graphics card. At the top, 3x 120 mm can be used as exhaust - or you can install a radiator for CPU water cooling. The side and rear mounting positions let you fine-tune the airflow depending on your build.Rear-chamber cooling with pre-installed fanFan brackets for three additional fansIn the rear chamber, there is a removable bracket that can accommodate 1x 140 mm and 2x 120 mm fans at the same time. This is useful if you want additional exhaust or targeted airflow in the second chamber without changing the look of the main chamber.Customizable elements in the O11 Vision-M: Cover, screen options, and 3D-print dividerCover with screen optionFor custom builds, the case offers a changeable layout and a removable cover that visually conceals a top-mounted AiO. The cover is prepared so that you can neatly integrate either a Lian Li 8,8-inch Universal Screen (sold separately) or another slim display there. Alternatively, it can be replaced with a Lian Li 9,2-inch LCD kit.The screen/LCD options are configured via L-Connect 3, for example for system values or custom animations, and can also be used as a second display if needed. In addition, Lian Li provides a free STL file for creating a 3D-printable divider. This allows you to visually close the gap between the top edge of the motherboard and the AiO, giving your build an even more unified look.
MC-CUBE MicroATX case Panoramic design in ultra-compact cube format and ARGB illumination.The MC-CUBE takes the compact case concept to another level with a cube-like design. Equipped with 1 ARGB 120mm rear fan with multiple preset lighting effects and ARGB sync cable and continuous tempered glass on the front and side, the MC-CUBE combines aesthetics and functionality in a chassis designed to maximize space. It also offers compatibility with MicroATX and Mini-ITX motherboards, support for 120mm liquid cooling, capacity for up to 5 120mm fans and USB-C, USB 3.0 and HD Audio connectivity. Panoramic tempered glass Ultra-compact cube format 120mm ARGB rear fan included Advanced connectivity with USB-C Cube format with panoramic designInnovative cube-like design, with compact dimensions that give it a personality of its own in any configuration. The continuous tempered glass on the front and side creates a spectacular panoramic effect that enhances the interior of the equipment and elevates your setup.ARGB LIGHTINGThe MC-CUBE incorporates 1 ARGB 120mm rear fan with multiple predefined lighting effects and cable for synchronization with motherboards and ARGB controllers, allowing to integrate the chassis lighting with the rest of the system components.Efficient coolingThe MC-CUBE offers a solid base to keep the temperature under control. With a rear fan included, it allows up to 5 x 120mm fans to be installed and supports liquid cooling up to 120mm, as well as supporting CPU heatsinks up to 163mm.Optimized compact designIts compact design allows Micro-ATX and Mini-ITX configurations to be assembled making the most of the space available, without sacrificing a functional, tidy interior layout, ready for convenient assembly.Hardware compatibilityDesigned for compact and functional configurations, the MC-CUBE offers optimized compatibility to build a high performance computer Graphics cards up to 260mm CPU coolers up to 163mm Up to 5x 120mm fans Liquid cooling up to 120mm Compatible with Micro-ATX and Mini-ITX boards Space for 2 x 2.5" SSD and 1 x 3.5" HDD Double chamber and easy maintenanceThe dual-chamber structure separates the power supply and cabling from the main components, promoting cleaner assembly and better interior organization. In addition, it incorporates a top magnetic dust filter that helps protect the interior and facilitates the daily maintenance of the equipment.Connectivity and quick accessIntegrates USB-C, USB 3.0 and HD Audio on the top panel for convenient connection of peripherals, headphones and other commonly used devices.
The Lian Li O11 Vision-M is a compact mATX PC case for current hardware and a visually appealing showcase build. Thanks to the dual-chamber design, the power supply, drives, and cables remain in the second chamber, while the front gives you an unobstructed view of the motherboard, graphics card, and your coolers. Three tempered glass panels create a panoramic look without a distracting support bar blocking the view.mATX dual-chamber PC case: Tidy build with a separate chamberTriple tempered glass: Front, side, and top with lock-and-key mechanismGPU and slot freedom: 5 PCIe slots and support for graphics cards up to 410 mm longAirflow & water cooling: Up to 12 fans and a 240/360 mm radiator in the topCustomizable design: Custom layout, cover for screen/LCD, STL file for 3D printing a dividerLian Li O11 Vision-M mATX case: Space for Mini-ITX, Micro-ATX, and high-end GPUsO11 Vision-M frontDespite its compact size, the O11 Vision-M offers room for Mini-ITX and Micro-ATX motherboards. With five PCIe slots, there is enough space for a large graphics card. Even long custom designs are no problem: GPUs up to 410 mm in length are supported. In the second chamber, you can fit an ATX power supply up to 182 mm long. There is also space for up to three drives there - ideal for keeping the power supply, storage, and cables out of sight.Triple tempered glass PC case: Panoramic showcase with lock-and-keyGlass on the front, side, and topThe front, side, and top are made of tempered glass. The panels are locked together using a lock-and-key mechanism and do not require an additional support in the corner. This gives the interior an open look and provides a clear view of your components.To prevent heat buildup despite the glass top, it features a large mesh cutout. This area is designed to reliably vent warm air upward - especially useful with fans or a radiator installed in the top.240/360 mm radiator in the top and well-thought-out tube routing for AiOsThere is space in the top for a 240 mm or 360 mm radiator. The radiator mount features integrated tube routing, allowing you to route your AiO tubes upward and over the motherboard. This keeps the GPU, RAM, and showcase area free of hoses running across them.Airflow in the Lian Li O11 Vision-M: Up to 12 fans for powerful coolingUp to 12 fans in total (distributed across the main and rear chamber)Top: 3x 120 mm (or 240/360 mm radiator)Bottom: 3x 120 mmSide: 2 fan mountsRear: 2 fan mountsFor cooling your hardware, the O11 Vision-M relies on numerous mounting points and a sensible fan layout. At the bottom, you can use 3x 120 mm as intake to supply fresh air directly to the graphics card. At the top, 3x 120 mm can be used as exhaust - or you can install a radiator for CPU water cooling. The side and rear positions allow you to fine-tune the airflow depending on your build.Rear-chamber cooling with pre-installed fanIn the rear chamber, there is a removable bracket that can simultaneously accommodate 1x 140 mm fan and 2x 120 mm fans. This is useful if you want additional exhaust or targeted airflow in the second chamber without changing the look of the main chamber.Customizable elements in the O11 Vision-M: Cover, screen options, and 3D-printed dividerCover with screen optionFor custom builds, the case offers a changeable layout and a removable cover that visually conceals a top-mounted AiO. The cover is prepared so that you can neatly integrate either a Lian Li 8.8-inch Universal Screen (sold separately) or another slim display. Alternatively, it can be replaced with a Lian Li 9.2-inch LCD kit.The screen/LCD options are configured via L-Connect 3, for example for system stats or custom animations, and can also be used as a second display if needed. In addition, Lian Li provides a free STL file for creating a 3D-printable divider. This allows you to visually close the gap between the top edge of the motherboard and the AiO, making your build look even more uniform.
The Lian Li Vector V150 is aimed at anyone who wants to build a compact system without giving up powerful hardware and a premium look. The tempered glass front combines an infinity mirror with two integrated 140 mm fans. Inside, the case offers plenty of room for large components, multiple drives, and extensive cooling. A pre-installed RGB and fan hub also helps you keep lighting and fan control neatly organized. Compact mATX format: For space-saving builds Infinity mirror front: Tempered glass with 2x integrated 140 mm fans Motherboard support: Compatible with Mini-ITX and Micro-ATX Plenty of room for graphics cards: 5 PCIe slots and up to 400 mm GPU clearance Powerful cooling: Up to ten fans and radiator support up to 360 mm The Lian Li Vector V150: Compactly built, made for large components The Vector V150 supports Mini-ITX and Micro-ATX motherboards and offers enough room for high-performance components. For air cooling, CPU coolers up to 163.5 mm in height are supported. Thanks to 5 PCIe slots and up to 400 mm of space for graphics cards, you can also install large GPUs. Clean cable management for a tidy build For a clean interior, there are thoughtfully placed cable pass-throughs, multiple mounting points, and Velcro straps. This allows the cabling to be neatly bundled and kept organized over the long term. You also have flexibility when it comes to drives. In the PSU chamber, a drive cage can be used depending on the PSU length. With a 150 mm PSU, it can accommodate 2x 2.5-inch SSDs or 1x 2.5-inch SSD + 1x 3.5-inch HDD. In addition, there are mounts for three more SSDs. Pre-installed RGB and fan hub An RGB and fan controller is already installed in the case. It brings lighting and fans together in one place, making the build and cable routing clearer and more organized. If you connect the hub to the motherboard, you can control the RGB lighting via compatible motherboard software. Alternatively, the hub can be switched to a wireless mode that can be used with a Lian Li L-Wireless Controller (sold separately) and L-Connect 3. Cooling like a wind tunnel: Many fans, clear airflow 3 fans pre-installed: 2x 140 mm at the front (integrated) + 1x 120 mm at the rear Up to 10 fans in total: Room for up to seven additional fans Top: 2x 140 mm or 3x 120 mm PSU chamber top: 2x 120 mm possible Cooling your components is one of the major advantages of the Vector V150. Three fans are already installed at the factory: two 140 mm fans in the front and one 120 mm fan at the rear. There is room in the top for 2x 140 mm or 3x 120 mm. An additional 2x 120 mm can be mounted on top of the PSU chamber. If you remove the side drive bracket, additional mounting points for 2x 120 mm are created there. This allows for up to ten fans in total. Radiator support for AiO liquid cooling If you want to use an AiO, the Vector V150 case is perfectly prepared for it: there is room in the top for a 280 mm or 360 mm radiator. This lets you tailor the number of fans and radiators to match the installed hardware and your desired noise profile. In addition, the case uses an airflow design that cools the graphics card in particular. There is an angled panel in the PSU chamber that directs the fresh air from the front fans specifically toward the GPU. The air then rises upward through the remaining components—ensuring stable temperatures, especially with high-performance graphics cards. Infinity mirror front made of tempered glass The tempered glass front is equipped with a large infinity mirror and also integrates the two 140 mm fans. Together with the glass side panel, you get a clear view of your hardware and the RGB lighting.
The Qube 540 is a compact ATX case for modern home and work builds. Retaining the clean, geometric design of the QUBE series, it offers flexible layout options that remove the limitations of traditional case formats. Whether it's your home desktop rig, your creator editing setup, or your first DIY build, it'll fit naturally into your space and lifestyle. The QUBE 540 offers full support for expansion, including high-end GPUs and 360mm liquid cooling. Its compact size fits comfortably in limited spaces, such as: B. on a bedroom desk or on a living room shelf. It supports everything from ITX to E-ATX motherboards (up to 280mm width). The housing can be oriented vertically and horizontally to meet different installation needs. Interchangeable I/O panel and movable handles The I/O panel (2x USB 3.2 Gen1, 1x USB Gen2 Type-C, (audio combo jack) and handles can be mounted top, bottom, left or right to allow ports to be accessed in any orientation. The internal structure can be configured to suit different build styles, easily allowing for different airflow paths, PSU positions and GPU orientations. Whether for optimization Cooling or hardware compatibility, the internal structure adapts to your style. Interchangeable components and flexible mounting options allow you to customize the internal layout and case orientation to suit your needs. Tower case type Color black EAN 4719512162064 Manufacturer no. Q540-MGNN-S00 Made in China Midi tower design Motherboard form factor E-ATX Material tempered glass, steel Window Kit Yes Internal dimensions plug-in card length CPU cooler height Power supply form factor Power supply length 3.5 inch drive bays 2.5 inches Slots full size Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Front 3 x 120 mm fans can be installed, alternatively 2 x 140 mm fans can be installed Rear 1 x 120mm fan pre-installed Remarks Dust filter: Top, bottom and front, Cable management: 27 mm, Top: 3 x 120 mm fans can be installed, alternatively 2 x 140 mm fans can be installed, Bottom: 3 x 120 mm fans can be installed, alternatively 2 x 140 mm fans can be installed Water cooling possible Yes Supported radiators Rear connection of the mainboard No Volume 49 l Dimensions Width: 22.5 cm x Height: 49.2 cm x Depth/Length: 43.85 cm Weight 8.1kg
