Black case with a closed side Efficient cooling with up to seven fans and a radiator up to 360mm Support for large motherboards up to E-ATX and back-connect Space for graphics cards up to 415mm and CPU coolers with a height of up to 184mm Up to six drives possible Three M25-120mm fans already included PHANTEKS XT Silent: Compact and simple midi-tower The PHANTEKS XT Silent fits into any setup with its simple black design. It offers extensive options for installing your high-end hardware. To keep your system cool even at full power, there is plenty of space for fans and radiators. Effectively cooled with fans and radiators To ensure your high-end components do not overheat even under full load, up to seven fans can be installed in the midi-tower. The top supports either up to three 120mm or two 140mm fans. Additionally, three more 120mm fans can be installed on the mid-plate. The rear also allows for a 120mm or 140mm fan. Furthermore, three PHANTEKS M25-120mm fans are already included in the package. If you prefer water cooling - whether an all-in-one water cooling system or a custom-built water cooling solution - there are two locations to install a radiator. A maximum 360mm radiator can be mounted at the top, and another 120mm radiator at the rear. With these fan and radiator options, your system will not lose performance. Hardware installation The midi-tower supports the installation of large graphics cards up to 415mm in size. Consequently, the current NVIDIA GPUs of the 40 series are also possible. Motherboards up to E-ATX format can be accommodated. To avoid messy cable clutter, you can also install motherboards with back-connect. The CPU cooler should not exceed a height of 184mm. On the other hand, there are hardly any limits for the power supply, as it can be up to 270mm long. To store programs and games, up to six drives can be installed: up to three 2.5-inch SSDs can be placed on the side, two more in the power supply chamber, as well as one 3.5-inch drive.
Tootekood: AIR 100 LITE (B)GTIN: 4710562740691Korpused
Small midi tower with tempered glass on the side, up to eight fans, space for a radiator up to 280mm, motherboards up to Micro-ATX, GPU up to 330mm and CPU cooler up to 161mm in height, up to four drives possible, two 120mm fans includedSmall case with tempered glass side panel Efficient cooling options with up to eight fans and radiators up to 280mm Support for motherboards up to Micro-ATX Space for graphics cards up to 330mm and CPU coolers with a height of up to 161mm Up to four drives possible Two 120mm fans included The Montech AIR 100 LITE: Minimalist case with high cooling performance The Montech AIR 100 LITE is the smaller variant of the Montech AIR 100 and impresses with its lightweight and minimalist design. Nevertheless, this midi tower offers extensive options for installing your hardware - particularly a variety of fans to keep your system cool. Well-cooled with fans and radiators Despite its small size, up to eight fans can be installed in the tower. The front supports a maximum of three 120mm or two 140mm fans. You can install two 120mm or 140mm fans at the top. A further 120mm fan can be installed at the rear, as well as up to two more 120mm fans above the power supply chamber. Two 120mm fans are already included at the front and rear. If you prefer water cooling - whether an all-in-one water cooler or a custom-built water cooling system - there are several locations where a radiator can be installed. The front supports a radiator up to a maximum of 280mm, the top supports a 240mm radiator, and another 120mm radiator can be installed at the rear. Hardware options The midi tower supports the installation of graphics cards up to 330mm in size. Motherboards up to Micro-ATX format are feasible. The CPU cooler should not exceed a height of 161mm. To store programs and games, up to four drives can be installed.
The Phanteks XT M3 impresses with a space-saving design that provides you with more than enough room for high-end components. Thanks to effective cooling and neat cable management, this case is suitable for everyone—whether you’re a casual gamer or an enthusiast. Compact Size: Space-saving case for high-end hardware Effective Cooling: Room for up to nine fans Large Radiator: Installation of a 360 mm radiator at the top is possible Tidy Build: Space for clean cable management Back-Connect Support: Supports motherboards with a back-connect design The Phanteks XT M3: Sleek mini case for your gaming setup Show off your gaming hardware with the Phanteks XT M3—a compact SF case built for greatness. Compatible with high-end graphics cards and motherboards with back-connect design, this tower is ready for your modern setup. Phanteks XT M3 Case Effectively cooled thanks to fans and radiator The Phanteks case supports installation of up to nine fans—for a cool build under any load. Three fans can be mounted at the bottom, directly under the graphics card, providing extra cooling for your GPU. Additionally, a 360 mm radiator can be fitted at the top if you prefer water cooling. Besides fans and a radiator, the mesh on the front also ensures very good airflow, so less hot air accumulates in your case. Your new gaming PC with clean cable management Laying cables neatly isn’t easy—but with the Phanteks XT M3, cable management is a breeze. Cutouts in the right places make it easy to route cables cleanly. Combined with support for motherboards with back-connect design, you get a tidy build that not only looks good but also allows for better air circulation. Mini-ITX case built for powerful hardware Even a large graphics card is no problem—the case offers space for a GPU up to 430 mm in length. Note that if you use the maximum length, you cannot install fans at the front. The CPU cooler should not exceed a height of 175 mm, and the power supply should be no longer than 150 mm.
• ATX compatibility compacted into the smallest footprint possible. • An ultraslim front panel and frame achieves a more compact form and conserves desk space. • Chamfered edges provide an alternative aesthetic as well as gentler handling. • Pre-installed 3x120mm ARGB PWM fans at front and 1x120mm ARGB PWM fan at rear, with a total maximum fan capacity of 8 fans. • Front/top/rear 120mm fans can be upgraded to 140mm fans. • Supports up to a 240mm AIO radiator OR an air cooler of up to 175mm height. • Accommodates up to 320mm GPU length. • Compatible with Mini ITX / M-ATX / ATX motherboards. • 1 x USB-C 3.2 Gen 2, 2 x USB-A 3.0 ports for total device connectivity. • Houses 2×2.5” SSD + 2×3.5” HDD drives or 3×2.5” SSD drives.
ASUS ROG Strix Helios II. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Frontventiler installeret: 3x 140 mm, Understøttede diametre for frontventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 250 mm, Dybde: 565 mm, Højde: 591 mm
mATX case with panoramic design, up to ten fans, space for radiators up to 360 mm, motherboards up to mATX & support for motherboards with rear connectors, GPU up to 410 mm and CPU cooler up to 170 mm tall, including three 120 mm reverse fans
Kompaktne keskmise torniga ATX-tüüpi arvuti, tiheda võrguga esipaneel; 3 x 120 mm ARGB ventilaatorit, tugi kuni 10 ventilaatorile; 360 mm vedelikjahutuse tugi ja alumised sisendpesad graafikakaardile; Graafikakaart kuni 430 mm, ...
Housing type: Midi Tower ATX Motherboard format acceptable: m-ATX, ATX, Extended ATX, mini ITX 5.25 "bays (external) - 3.5 "bays (internal) 3 pcs 2.5 "bays (internal) 4 pcs The number of expansion slots: 7 +3 pcs. USB socket on the front panel: 1 x USB 3.0, 2 x USB 2.0 Front panel microphone jack: 1 piece. Headphone jack on the front panel: 1 piece. Tool-free assembly: No Height: 487 mm Width: 230 mm Depth: 440 mm Number of fans installed: 5 pcs (2x RGB LED front 20 cm., 1x RGB LED rear 14 cm., 2x top 14 cm) Number of places for additional fans: 0 Maximum length of graphics cards: 370 mm The maximum height of the CPU heat sink: 180 mm Water cooling support: Yes (Front: 360mm; Rear: 120mm) Housing color: Black and silver More information: Dust filter x 3 Tempered glass on the side of the housing LED backlight. Removable side panel 90 degree inverted HD cage Bottom mounted power supply. Cable arrangement system Kit contents: Remote control to control the backlight, screws, cable ties.
Product kirjeldus: Zalman S3 TG - Torn - ATX Product Type: System cabinet Form Factor: Torn I/O Ühendusi: 2 x USB 2.0 1 x kõrvaklapid 1 x microphone 1 x USB 3.0 Supported Motherboards: ATX, microATX, Mini-ITX System Cabinet Features: Supports 120 mm radiator in rear, toetab 120 mm radiator in front panel, tempered glass side panel, bottom dust filter, top magnetic dust filter Power Device: No toiteplokk mõõtmed (WxDxH): 19.6 cm x 42.4 cm x 46.2 cm kaal: 4.8 kg