Aerocool Prime v2 on suure jõudlusega midi-tornkorpus, millel on julge RGB esipaneeli disain, mis tagab võimsa ja dünaamilise välimuse.; See on varustatud karastatud klaasist külgseinaga, et esitleda seadme sisemust.; Esipaneeli ...
Unique Design & Powerful Heat Dissipation The AX90 features a unique mesh front panel design and excellent cooling performance. The full-view tempered glass side panel design allows you to show off your gaming configurations without any obstacles. 11 x 120mm fans can be installed simultaneously.
Portos ARGB Mini Black Logic Portos ARGB Mini is a chassis created to build a powerful and modern gaming PC. WHEN IT'S THE INSIDE THAT COUNTS... Are you building a computer for gaming? And you want it to not take up too much space on your desk? Then of course you need a well-thought-out, well-designed and good-looking MINI ATX-sized case. Preferably still one with three mounted ARGB fans, an airy front and top, dust filters, and the side panel was made into a tempered glass door. This is where Case Logic Concept Portos ARGB MINI comes to the rescue. A concrete competitor for gaming tasks, providing good airflow, component culture, their safety and low temperatures of installed components. OPEN YOURSELF TO NEW A side panel made of tempered glass in the form of a hinged door makes it easier not only to install components, but also to keep the computer clean. Just open the door and clean the center with compressed air. Isn't it simple and practical? It's the only one we want to give you, because they simply belong to you. TO HOT COMPONENTS SAY "NO" An airy front and top panel significantly facilitates air circulation. Two 120 mm fans on the front and one 120 mm fan on the back Cases effectively cool the heated components. All for your comfort and the safety of your computer. Always willing to play Logic PORTOS ARGB MINI is a case created to build an efficient and modern gaming PC. Optimal airflow, practical solutions and pre-installed ARGB fans make up its gaming character. READY FOR GAMING COMPONENTS The ability to mount graphics cards up to 340 mm and a maximum CPU cooling height of 155 mm allows the installation of most high-performance components available on the market. PROTECT YOUR COMPUTER FROM DUST DUST FILTERS A dust filter has been placed under the power supply unit. It minimizes the amount of dust sucked in by the PSU's fan, positively affecting its operating temperature and service life. An additional filter is located on top of Cases. This effectively traps unwanted dust and protects the installed components. It protects against dust that enters the computer by gravity throughout the day, even when the computer is turned off. All the effective protection is complemented by mesh mesh on the front panel. OPTIMAL AIR CIRCULATION The ventilated front panel provides airflow with two, efficiently operating 120 mm fans. The back of Cases , on the other hand, features one pre-installed 120 mm fan This allows you to effectively cool the installed components of the computer's interior, positively influencing the culture of their operation and service life. As an option, it is possible to mount two 140 millimeter fans on the front of Cases in place of the factory-installed ones and two 120 or 140 millimeter fans on the top on their own. Case It is also adapted for installation of water cooling. ARGB BEAUTY Case for gamers must look nice. That's why the pre-installed ARGB fans add beauty to the case and the gaming stand. The color of the backlight can be changed at will from the predefined settings using the button on the control panel Cases. Convenient access to the top panel Convenient access to the top panel, and there are two USB 2.0 and one USB 3.0 connectors, plus one minijack connector for headphones and microphone, a power button and a button to control the fan backlight. SIMPLE INSTALLATION Everything here is well thought out and intuitive. Building a computer in this case is a pleasure and is child's play. POWER SUPPLY A gaming computer must have a good and powerful power supply. That's why we made sure that it has a home here! The maximum length of the power supply with the disk cage installed is 200 mm. A dust filter has been placed under the power supply, which effectively protects the operation of the power supply from dust 4 PCIe expansion card slots Four slots for PCIe expansion cards. This is the optimal number for mounting, among other things, a graphics card and a network card. SPACE FOR GAMES IN ABUNDANCE The mounting of HDD or SSD drives is obviously thought out here as well. Inside Cases at tunnel level there is a basket for 3.5" or 2.5" drives. On the motherboard tray, on the other hand, it is possible to mount an additional 2.5" drive. A total of 2 SSDs and 1 HDD or 1 SSD and 2 HDDs can be installed.
Elegant and versatile mATX case, revised version, front / top / side panels with mesh for optimal airflow, up to 3x 120 mm fans, for GPUs with max. 225 mm length, convenient carrying strap
Das AeroCool D301A Mini-Tower-Gehäuse kombiniert ein trendiges Mesh-Design mit Holzakzenten an der Front mit einer robusten SPCC-Konstruktion für Langlebigkeit. Es unterstützt ASUS- und MSI-m-ATX-Motherboards mit rückwärts gerichteten Anschlüssen, Flüssigkeitskühler bis zu 360 mm und GPUs bis zu 410 mm und bietet so ein leistungsstarkes PC-Baupotenzial in kompakter Form. Mit 11 Lüftersteckplätzen für optimale Kühlung, vielseitigen Speicheroptionen und praktischen E/A-Anschlüssen, einschließlich USB Typ C und USB3.0, ist dieses Gehäuse auf Leistung und Benutzerfreundlichkeit ausgelegt.
Zalman P30 V2 micro-ATX Case with Tempered Glass and Panoramic View - White The Zalman P30 V2 micro-ATX case in elegant white combines a modern design with high functionality, ideal for PC enthusiasts and gamers. The Panoramic View side panel made of tempered glass shows off your components in all their glory and gives the setup a clean, minimalist look. The V2 version comes with optimized features and improved cooling performance for demanding builds. Key features of the Zalman P30 V2 case in white: Panoramic Tempered Glass Side Panel : Provides a complete view of the hardware and showcases it in style. Compact micro-ATX format : Perfect for micro-ATX and mini-ITX motherboards, ideal for powerful builds in a small footprint. Improved cooling performance : Support for multiple fans and water cooling for efficient heat dissipation and reliable operation. Modern white finish : Matches minimalist and bright setups and gives the system a fresh, timeless look. The Zalman P30 V2 case in white is the perfect choice for those who value aesthetics and efficiency. The combination of panoramic view, high-quality tempered glass and the elegant white design make it the ideal choice for sophisticated and style-conscious PC builds.
Micro-ATX case for DIY NAS, one pre-installed fan, GPUs up to 230 mm / CPU up to 70 mm height, 6x 3.5 / 2x 2.5 inch drives possible, 1x USB-C / 1x USB-A
Black case with 270° tempered glass side panel Optimal cooling options with up to nine fans and radiators up to 420 mm Spacious interior for versatile high-end motherboards up to E-ATX Room for graphics cards up to 460 mm and CPUs up to 170 mm in height Installation of up to nine SSDs enables extensive storage options Supports motherboards with back-connect (ATX, mATX) Modular design simplifies assembly The TRYX LUCA L70: Midi-Tower for gaming PCs with maximum power The TRYX LUCA L70 is a large midi-tower that convinces not only with its wide range of hardware possibilities, but also with its timeless design that fits into any setup. The tempered glass on the front and side puts your high-end build in the spotlight—ready to receive true admiration. With the LUCA L70, you’re perfectly equipped to assemble your gaming PC exactly as you wish. This midi-tower offers more than enough space to keep your hardware cool, and is also extremely easy to take apart and put back together. Building your high-end setup has never been so easy! Comprehensive cooling options for your new build When building your own PC, cooling is one of the most important factors to consider. The LUCA L70 allows the installation of up to nine fans: two 120 mm or 140 mm fans on the top, three 120 mm or 140 mm fans on the side, three 120 mm or 140 mm fans on the bottom, and one 120 mm fan at the rear. Note that with this combination, the power supply unit must be mounted on the top of the case. If you prefer mounting the PSU on the bottom, three fans can be installed on the top and only one on the bottom. Water cooling enthusiasts will also not be disappointed: radiators up to 420 mm can be installed in several locations. If the power supply is on the top, only a 240 mm radiator is possible there and a maximum 360 mm radiator on the bottom. If you mount the PSU at the bottom, there is room for a 420 mm radiator on the top as well as on the side. To prevent unnecessary dust buildup inside the case, there are dust filters on the top and bottom. This ensures a much longer lifespan for your hardware and saves you time and annoying cleaning. Thanks to the many options for installing fans and radiators, effective cooling is ensured so your high-end hardware always performs at its peak. In addition, the tower stands 4 mm above the ground on X-shaped legs, which further improves airflow. Case for powerful hardware So you can play even the most demanding games smoothly at high settings, the LUCA L70 accommodates a high-performance graphics card up to 460 mm in length. An included GPU bracket ensures it’s not subject to gravity. Vertical GPU installation is also possible—appropriate accessories must be purchased separately. The midi-tower is compatible with motherboards up to E-ATX with a width of up to 280 mm. To avoid cable clutter, it also supports motherboards with back-facing connectors when the PSU is on top, but only in ATX or micro-ATX format. The CPU height must not exceed 170 mm, and the power supply should be no longer than 190 mm. For plenty of storage for your programs and games, you can attach up to nine 2.5-inch drives to the side of the LUCA L70. Tool-free assembly and disassembly To make installing and swapping hardware as easy as possible, the LUCA L70 is fully modular. The front, side, and other parts can be taken apart and reassembled without any additional tools, plus the motherboard tray can be moved so you can install the motherboard, CPU, and CPU cooler independently.
Showcase your hardware perfectly with the Phanteks Evolv S2 PC case. The spacious panoramic design with glass front and sides always gives you a clear view of your components—ideal for eye-catching builds with RGB lighting and custom water cooling. Black midi-tower with panoramic design Efficient cooling options with up to seven fans and radiator support up to 360 mm Supports motherboards up to E-ATX size with back-connect design Space for graphics cards up to 395 mm and CPU coolers up to 175 mm in height Clean look thanks to hidden cabling Four integrated RGB fans Phanteks Evolv S2: Midi-tower with panoramic design The Phanteks Evolv S2 midi-tower offers the perfect balance between size and functionality. With ample space for powerful hardware and efficient cooling, it’s the ideal choice for gaming and workstation builds. Optimal cooling with fans and radiators To keep your hardware cool under any load, the Phanteks Evolv S2 can accommodate up to seven fans. The top and bottom each support the installation of three 120 mm fans, while the rear can hold a 120 mm fan. To get you started, four 120 mm fans are already pre-installed—three at the bottom and one at the rear. If you prefer water cooling—whether AiO or custom—you can also install a radiator. The top supports a radiator up to 360 mm in size. Installing your hardware The case supports the installation of graphics cards up to 395 mm in length. Motherboards up to E-ATX format are supported. The new back-connect design motherboards are also compatible, allowing for clean cable management and an upgraded setup. The CPU cooler should not exceed 175 mm in height. Up to four drives can be installed to store your programs and games.
Verbessern Sie Ihr Y70 und erleben Sie sinnvolle digitale Interaktion mit dem besten Display aller Zeiten in einem Gehäuse. Es erlaubt eine umfangreiche Bildschirmanpassung mit einer Vielzahl von Themen, Widgets und mehr. Mit einer Auflösung von 688 × 2560 (2,5 K) bei 14,9 Zoll, einer Bildwiederholfrequenz von 60 Hz, 10-Punkt-Multitouch-Funktion und umfassender Bildschirmanpassung durch HYTE Nexus, alles in das Gehäuse integriert, mit einem einfach zu installierenden Kit!
