The Ubiquiti OCD series is designed to streamline cabling in network environments, offering a reliable blank rack panel. This 2U blank panel provides a clean and professional appearance while effectively managing cabling solutions. Built with unshielded twisted pair (UTP) technology, it supports efficient installation and organization of cables, serving as a component in any structured cabling system.
Minimalist mini-tower, includes one Mercury AM120S fan, supports up to five fans, accommodates GPUs up to 340 mm / CPUs up to 162 mm in height, supports up to three drives, radiator up to 240 mm, 1x USB-C / 2x USB-A
The DIGITUS wall-mounted data communications cabinet is equipped with a glazed door and a cable gland in the roof and floor. The steel structure is made of steel sheet up to 1.5 mm thick. It is possible to change the side of the door hinges and adjust the depth. The rack cabinets are delivered unassembled, in a flat package. Assembly is carried out in a few simple steps thanks to the enclosed "step-by-step" instructions. Installation cabinet supplied unassembled Quick installation Door opening angle: 200° 1-point locking on front door 483 mm (19") rack profiles mounted at the front inside the cabinet, galvanized 483 mm (19") rack profiles with depth adjustment 1.1-1.5 thick, high-strength sheet steel, powder-coated Cable inlet with brush strip in the roof and plastic cover in the floor Ventilation slots for active and passive air supply and exhaust Front door: glass, single Side panels: on two sides Assembled: no
Versatile midi-tower, front and side panel made of tempered glass, large mesh areas on the left side panel and top, 2x 140mm & 1x 120mm ARGB PWM fans pre-installed, GPU length of up to 420mm, CPU cooler height up to 175mm
Darkflash DRX90 Mesh computer case (white)If you're looking for a case that combines modern design with functionality and flexibility, the DarkFlash DRX90 Mesh is an excellent choice. Created for high demands, it offers excellent ventilation, support for modern components, and an aesthetically pleasing finish that will perfectly complement any computer set-up.Magnetic front panelThe darkFlash DRX90 Mesh case is distinguished by its magnetic front panel. The mesh from which it is made ensures maximum ventilation, especially with demanding components that generate a lot of heat. Removal of the panel is simple and tool-free, thanks to a hinged "clamshell" mechanism.Spacious and compatibleThe DRX90 Mesh supports ATX, Micro-ATX and ITX motherboards, making it a versatile choice for various configurations. The interior allows the installation of graphics cards with a maximum length of 395 mm and CPU coolers up to 185 mm high. With seven PCI slots, it allows the installation of a wide range of expansion cards. The DRX90 Mesh also provides space for two 2.5"/3.5" drives, as well as an additional 2.5" SSD bay. This allows you to customize your configuration to meet changing requirements, while keeping the inside of the case tidy.Advanced cooling optionsThe DRX90 Mesh provides support for up to 12 120mm fans or 6 140mm fans, offering versatile cooling configuration options. You can mount up to 360 mm heatsinks on the top and front of the case, as well as a 120 mm heatsink on the back - an ideal option for water cooling. With adequate airflow, you'll keep temperatures low even when running demanding software.Graphics card holderThe built-in graphics card holder is a practical addition that ensures the stability of heavy GPU models. The adjustable mechanism allows you to adjust the height to accommodate different card thicknesses, which reduces the risk of damage and improves the aesthetics of the installation.Tidy and dust-freeThe case has been designed with neat cable routing in mind. Rubber cable grommets facilitate organization by minimizing the visibility of cables. The spaciousness of the interior allows for unobstructed cable routing while ensuring unobstructed airflow. What's more, the DRX90 Mesh is equipped with dust caps to protect I/O ports from dirt, as well as dust filters on the front, top and bottom panels. This will keep the inside of your computer clean and efficient for a long time.I/O ports always at handThe darkFlash DRX90 Mesh chassis offers a conveniently located I/O panel with a USB-C port, USB 3.0, USB 2.0, HD Audio connector and Power and Reset button. It's ideal for those who appreciate easy access to the most important ports.Durable construction and modern designThe case is made of 0.6 mm thick steel and tempered glass. A reinforced base with trapezoidal feet reduces vibrations and increases the stability of the case. The minimalist industrial look of the mesh front panel blends perfectly with modern gaming PC interiors.IncludedCaseDust caps (USB-C, HD Audio)Set of mounting screwsUser manual ManufacturerDarkflashModelDRX90 MeshHousing typeMid TowerSide panelTempered glassMotherboard standardATX, M-ATX, ITXPower supply standardATX at the bottomSlots for internal drives3.5'HDD x2, 2.5'SSD x1Expansion card slots7Max PSU length250 mmMax length of graphics card395 mmMax height of CPU cooler185 mmMax number of fans12Fan mounting optionsTop: 120 mm x3/140 mm x2; Front: 120 mm x3/140 mm x3; Rear: 120 mm x1/140 mm x1; Bottom: 120 mm x3Water cooling mounting optionsTop: 240, 280, 360 mm; Side: 120 mmNumber of fans installedFront: 3; Rear: 1Type of fansC7, RGB, 120 mmButtons and controlsPower, Reset, LED, fan speed controlConnectorsUSB3.0 x1, USB2.0 x1, Type-C x1, HD AudioMaterial0.8 mm SPCCColorWhiteHeight460 mmWidth230 mmDepth465 mmWeight8.2 kg
Tootekood: AIR 100 LITE (W)GTIN: 4710562740882Korpused
Small midi tower with tempered glass on the side, up to eight fans, space for a radiator up to 280mm, motherboards up to micro-ATX, GPU up to 330mm, and CPU cooler up to 161mm height, up to four drives possible, two 120mm fans included - Compact case with side panel made of tempered glass - Efficient cooling options with up to eight fans and radiators up to 280mm - Support for motherboards up to Micro-ATX - Space for graphics cards up to 330mm and CPU coolers with a height of up to 161mm - Up to four drives possible - Two 120mm fans included The Montech AIR 100 LITE: Minimalist case with high cooling performance The Montech AIR 100 LITE is the smaller variant of the Montech AIR 100 and impresses with its lightweight and minimalist design. Nevertheless, this Midi-Tower offers you extensive options for installing your hardware - particularly a variety of fans to keep your system cool. Well-cooled with fans and radiators Despite its small size, up to eight fans can be installed in the tower. The front supports a maximum of three 120mm or two 140mm fans. You can install two 120mm or 140mm fans on the top. A further 120mm fan can be installed at the back, as well as up to two additional 120mm fans above the power supply chamber. Two 120mm fans are already included at the front and back. If you prefer liquid cooling - whether it's an all-in-one liquid cooler or a custom-built liquid cooling system - there are several places to install a radiator. The front supports a radiator up to a maximum of 280mm, the top supports a 240mm radiator, and a further 120mm radiator can be installed at the back. Hardware options The Midi-Tower supports the installation of graphics cards up to a size of 330mm. Motherboards are compatible up to the Micro-ATX format. The CPU cooler should not exceed a height of 161mm. To store programs and games, up to four drives can be installed.
Showcase your hardware perfectly with the Phanteks Evolv S2 PC case. The spacious panoramic design with glass front and sides always gives you a clear view of your components—ideal for eye-catching builds with RGB lighting and custom water cooling. Black midi-tower with panoramic design Efficient cooling options with up to seven fans and radiator support up to 360 mm Supports motherboards up to E-ATX size with back-connect design Space for graphics cards up to 395 mm and CPU coolers up to 175 mm in height Clean look thanks to hidden cabling Four integrated RGB fans Phanteks Evolv S2: Midi-tower with panoramic design The Phanteks Evolv S2 midi-tower offers the perfect balance between size and functionality. With ample space for powerful hardware and efficient cooling, it’s the ideal choice for gaming and workstation builds. Optimal cooling with fans and radiators To keep your hardware cool under any load, the Phanteks Evolv S2 can accommodate up to seven fans. The top and bottom each support the installation of three 120 mm fans, while the rear can hold a 120 mm fan. To get you started, four 120 mm fans are already pre-installed—three at the bottom and one at the rear. If you prefer water cooling—whether AiO or custom—you can also install a radiator. The top supports a radiator up to 360 mm in size. Installing your hardware The case supports the installation of graphics cards up to 395 mm in length. Motherboards up to E-ATX format are supported. The new back-connect design motherboards are also compatible, allowing for clean cable management and an upgraded setup. The CPU cooler should not exceed 175 mm in height. Up to four drives can be installed to store your programs and games.
Especially with compact cases equipped with powerful gaming hardware, the focus should be on optimal cooling. With the Meshlicious, Lian Li's subsidiary Ssupd (Sunny Side Up Design), in collaboration with Ncase, presents an exceptionally small Mini-ITX case whose front, top, and side panels are all made entirely of fine mesh, ensuring virtually unobstructed airflow. The interior is also extremely versatile thanks to its clever design. Graphics cards up to 4 slots high can be installed behind a Mini-ITX motherboard. There is also space for large radiators and numerous data drives, which can be powered by either an SFX or ATX power supply — all in a volume of just 14.67 liters. The features of the Ssupd Meshlicious Full Mesh PCIE 5.0 Edition Mini-ITX Case: Extremely compact Mini-ITX case for high-performance gaming hardware Front, top, and side panels made from fine mesh for optimized airflow Supports GPUs up to 4 slots high and 336 mm long Space for two 140 mm fans or a 280 mm radiator at the front Includes a PCIe 5.0 riser card Compatible with ATX or SFX format power supplies Room for up to two 3.5-inch or seven 2.5-inch drives I/O panel with USB-C 3.1 and USB 3.0 Type-A Ssupd Meshlicious: Simple but functional design Externally, the Ssupd Meshlicious stands out at first glance due to its particularly compact SFF format and its extensive mesh panels. The top, front, and both side panels are made from fine mesh, which provides ample fresh air intake while also being light-permeable. All panels can be easily removed thanks to four pins on each, making the installation of high-end gaming hardware easier. The minimalist I/O panel on the lid features a USB-C 3.1 port, a USB 3.0 Type-A port, and an LED-lit power button. The motherboard connections are accessible as usual from the back of the case. On the inside, the Ssupd Meshlicious proves to be highly adaptable. Those who prefer a powerful gaming setup can install a graphics card up to 4 slots high and 336 mm long vertically behind the motherboard tray. Ssupd provides a PCIe 5.0 riser card for this purpose. The GPU ports then face downward and are accessible via an opening. The cable connections must be angled, and an appropriate HDMI cable is included. Versatile and thoughtfully designed In this configuration, the front can accommodate up to two 140 mm fans or a 280 mm radiator. There is 53 mm of space for CPU coolers, as the motherboard tray can be repositioned. By reducing the GPU height to three or two slots, the motherboard tray can be moved back to make room for CPU coolers up to 73 mm high. Alternatively, a compact 2-slot graphics card of up to 211 mm in length can also be installed horizontally, though this comes at the expense of the front radiator. Below it, a provided bracket can be attached to hold two 3.5-inch or four 2.5-inch drives. When using an optional power supply, you can choose between ATX, SFX, or SFX-L formats. The latter frees up space for another 2.5-inch drive. At the bottom, in both configurations, two 2.5-inch drives can be installed in this versatile and stylish Mini-ITX case.
The Lian Li Vector V100 combines stylish yet simple design with high compatibility and a special cutout for more individuality. With this desktop case, you get the perfect chassis for your next gaming PC. White midi-tower with tempered glass on the side and front Supports motherboards up to ATX form factor and with back-connect design Optimal cooling with up to nine fans and radiator support up to 360 mm Space for graphics cards up to 415 mm and CPU coolers up to 180 mm in height Four 120 mm fans with RGB lighting included Cutout with removable cover for collectibles The Lian Li Vector V100: midi-tower with a stylish design and plenty of space for hardware Express your personality with the Vector V100. Thanks to tempered glass panels on the side and front, you have an unobstructed view into your tower’s interior, while the LED strips are just the beginning of impressive RGB lighting. Make your build something special Directly behind the front of the V100 case is a cutout. Whether for figures or other collectibles—you can display your interests. If you don't need the cutout, simply cover it with the removable panel. Extensive cooling options Four 120 mm ARGB fans are already pre-installed—three reverse fans on the side and one with standard orientation at the rear. Thanks to their reversed fan blades, the sideways-mounted fans provide efficient airflow—and look just like regular fans. Additional mounting points for more fans are located on the top and bottom. If you prefer water cooling, you can also install a radiator up to 360 mm on the top panel. The dust filter at the bottom is easy to remove, so you can clean it whenever needed. Easy installation of your gaming hardware The Vector V100 offers plenty of space for your components—even high-end hardware. Thanks to support for motherboards with back-connect design and tidy cable management, your build will really stand out.
We create solutions that count every dayThe 2.5" SSD or HDD adapter is an extremely practical tool for anyone looking for mobility and quick access to stored data. It allows you to quickly and efficiently access your data wherever you are, making it extremely helpful not only for people who store important documents or private files on drives, but also for small businesses who want to achieve the same benefits without having to invest in other expensive solutions. It's not just about 5Gb/s speed, it's also about convenience - one device, one USB cable, 2TB capacityWith a data transfer rate of 5Gb/s, you can access your files in no time. Whether you're working or enjoying multimedia, this enclosure enables the smooth transfer of information, enhancing the performance of your system.Our device offers: compatibility with multiple Windows and Mac, Linux systems, suitable for SSD and HDD disk 2.5", USB-C interface supports data transfer rates of up to 5 Gb/s, a single drive supports up to 2TB, useful when there is no other way to connect an SSD or HDD, USB-C cable made of the highest quality flexible material, which guarantees not only durability but also comfort of use, no need to install drivers, simply plug into a USB port and use thanks to the simplicity of the Plug&Play function. Maximum mobility in an elegant aluminium housingSleek and handy adapter for your drive is a stylish protection for your valuable data. The compact size of the adapter will allow you to take it with you to work or other places, the pocket fits easily into a backpack. Reliability, convenience and functionality - you will find it all in this unique product. Convenient and Universal Solution for SSD and HDDNo special tools are needed to mount the SSD or HDD disk, simply slide out the case, insert the drive accordingly and slide it back into the case and screw it on. Once you have connected the bay to the device of your choice, you are good to go, the device is ready to go. Plug&Play function - no drivers to install, just plug and play!
