This is proof that the unique appearance of a computer case can go hand in hand with excellent air circulation and capacity useful when creating your own hardware configuration. Krux Vako White RGB is a white version of the legendary Vako housing without even the slightest compromise. Arctic cold inside Excellent airflow in the white Vako is ensured by three efficient, factory-installed RGB fans. They help maintain a low temperature of components, and thus promote quieter operation. Two 140 mm front fans draw cool air into the case, while one with a diameter of 120 mm exhausts it from the back. Snow Queen What undeniably distinguishes Krux Vako White RGB from other housings is its crystal white color. Such a white tower will be a great culmination of an aesthetic streaming setup, or it will better fit into the bright decor of the room. No matter how you use it, it will always soothe your eye with its cool whiteness. Aurora in the fan White is not the only visual advantage of this housing. Pre-installed zone-illuminated RGB fans enhance the appearance of both the external panels and the components inside. Their power supply and backlight are connected with 3-pin plugs, which facilitates compatibility with the power supply. Look inside Like through a crystal ball, you can look through the tempered glass side panel into the Krux Vako White RGB case and admire the beauty of your setup. Moreover, this panel is mounted on magnetic latches. Disassembly and reassembly become very simple, so you don't have to worry about scratches and breaks. Space and accessibility Krux Vako White RGB has great capacity for its size. It can accommodate an ATX motherboard up to 240 mm AIO, and next to it there can be a graphics card up to 310 mm long. There are also four places for drives, and on the floor there is space for a power supply up to 160 mm. The external, upper panel of the housing gives access to three USB ports (including one in the 3.0 standard) and the most necessary audio ports. Krux Vako White RGB - main features: Aesthetic, white casing color Two 140 mm fans behind the front panel and one 120 mm fan with back of the housing Zone RGB lighting Roomy interior Design that ensures good air circulation
Horizon ARGB FLOW Midi White Three 140 mm ARGB fans are installed in the case at the front, pushing air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. 3 140 mm ARGB fans pre-installed on the front of the case. 1 120 mm ARGB fan pre-installed on the rear of the case. Glass side panel in the form of hinged doors. Airy front and top panels. 2 x USB 3.0 and 1 x USB-C. Screw-out PCI-E slot brackets. Possibility of mounting E-ATX motherboards. Ready for water cooling. Power supply tunnel. Available in fashionable white or elegant black. Four dust filters at the bottom, top, front and side of the case. Easily removable mesh on the front. Space for 4 hard drives (in a configuration of 2 SSD / 2 HDD or 3 SSD / 1 HDD or 4 SSD). ARGB fan controller. Your dream case is here, not over the horizon. MODECOM Horizon is one of those cases that fully meets the need for a decent, solidly made and functional computer case. This classic-looking case has a lot to offer. There are three 140 mm ARGB fans installed as standard at the front and one 120 mm ARGB at the back of the case. In addition, inside you will find plenty of space even for E-ATX boards, high CPU cooling and long graphics cards. And all this is closed behind a glass panel in the form of a door, surrounded by airy mesh panels with dust filters. The whole thing is enclosed in one, perfectly designed MODECOM Horizon case. Don't close yourself off to new things The side panel made of tempered glass in the form of an opening door is the very convenience of assembling and cleaning the computer. You can easily and conveniently open the door and assemble the set, replace RAM, graphics card and other components. There is no simpler and more convenient solution for assembling and modifying the interior of the computer and cleaning it, like the one used in the MODECOM Horizon case. Tempered glass, in turn, allows you to expose the installed graphics card and other expensive components. Nothing can stop this wind The case has three 140 mm ARGB fans installed on the front, which force air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. You get a case ready to use right out of the box, all you need to do is mount the components in it and work on a well-cooled and ventilated computer. Create a storm But that's not all, you can install additional 3 120 mm fans or 2 x 140 mm on the top of the case yourself. There is also the possibility of mounting two 120 mm fans on the motherboard wall. A computer configured in this way will be optimally cooled, ensuring that components operate at low temperatures, while contributing to their longer lifespan. Ready for anything The case is adapted to mount E-ATX boards. The wide possibilities of arranging and expanding the computer will work well in both gaming computers and professional solutions. The unlimited freedom of computer configuration allows for the installation of modern components with the possibility of further expansion. Games and programs will find their place here The MODECOM Horizon case has space for 4 hard drives. Two 2.5 SSD drives will find their place on the motherboard tray. Placed in a convenient place for connection, they will work great as media for games and programs. The disk basket in the power supply tunnel allows for the installation of two 3.5 HDD drives or a configuration of 1 x 2.5 SSD and 1 x 3.5 HDD. You can also simply put on 2.5 SSD drives and mount two such drives in the power supply tunnel. If you add space for M.2 drives on the motherboard, the MODECOM Horizon computer will become a real storage for games and documents.
Midi tower case, with tempered glass side panel, excellent airflow thanks to fine mesh front, space for radiators up to 360 mm, 4x 140 mm fans pre-installed, support for motherboards with rear connections.
Obudowa do konstruowania wydajnych komputerów mid tower iCUE LINK 5000T LX RGB Przyciągnij uwagę za pomocą wyjątkowej profilowanej konstrukcji obudowy CORSAIR 5000T LX RGB, w której możesz zbudować idealny system oparty na płycie głównej z odwróconymi złączami. Elegancka stalowa obudowa o wyjątkowym kształcie 3 wentylatory LX120 RGB i koncentrator systemowy iCUE LINK w komplecie Zintegrowane taśmy świetlne RGB Aurora zapewniające rozproszone oświetlenie Działa z płytami głównymi z odwróconymi złączami Zdejmowane panele przedni i górny z siateczki umożliwiające intensywny obieg powietrza Mieści do 10 wentylatorów 120 mm lub 4 wentylatorów 140 mm oraz kilka radiatorów 360 mm System organizacji okablowania RapidRoute EFEKTOWNE LINIETa elegancka obudowa o wyjątkowym kształcie z taśmami świetlnymi iCUE LINK Aurora i wentylatorami iCUE LINK LX120 RGB zapewnia wyraziste i dynamiczne podświetlenie pozwalające podziwiać jej uderzające piękno. OGROMNY POTENCJAŁ CHŁODZENIAPrzestronne wnętrze pomieści nawet 10 wentylatorów 120 mm albo 4 wentylatory 140 mm, a także kilka radiatorów o wysokości 60 mm, w tym z przodu lub boku - o rozmiarze 360 mm oraz w górnej części - o rozmiarze 360 mm w konfiguracji push/pull. PEŁNA FUNKCJONALNOŚĆTa obudowa ma wszystko, czego potrzeba do budowy bardzo wydajnego komputera. ZDEJMOWANE PANELE PRZEDNI I GÓRNYSiateczkowe panele o wyjątkowej konstrukcji, które można łatwo zdjąć, aby dostać się do środka, umożliwiają intensywny przepływ powietrza. DWA OBSŁUGIWANE BEZNARZĘDZIOWO PANELE BOCZNE NA ZAWIASACHŁatwy dostęp do systemu dzięki panelom na zawiasach: jednemu ze szkła hartowanego, eksponującemu wszystkie komponenty, oraz jednemu ze stali z drugiej strony. SYSTEM PROWADZENIA PRZEWODÓW CORSAIR RAPIDROUTEUmożliwia szybkie i łatwe poprowadzenie przewodów przez obszerny 46-milimetrowy ukryty kanał pod płytą główną. OBSŁUGA PŁYT GŁÓWNYCH Z ODWROTNYMI ZŁĄCZAMISprawdzona pod kątem zgodności z płytami głównymi ASUS BTF, MSI Project Zero oraz Gigabyte Project Stealth, które mają złącza z tyłu, dzięki czemu nie psują widoku przez podłączone kable. PROSTA KONSTRUKCJANowoczesna konstrukcja w popularnym formacie obudowy komputerowej 5000T ma wygodne rozwiązania, które ułatwią Ci pracę. PUDEŁKO NA ŚRUBY WIELOKROTNEGO UŻYTKUDzięki dodanemu w zestawie pudełku, w którym wszystkie potrzebne Ci śruby będą bezpiecznie zamknięte, nie zgubisz już żadnej ważnej śrubki. PRZELOTKI FORMOWANE W DWÓCH CYKLACHDzięki miękkim, gumowym przelotkom wewnętrznym umożliwiającym łatwe przeciąganie kabli oraz twardym gumowym przelotkom zewnętrznym, które pewnie trzymają się na miejscu, możesz uniknąć frustracji podczas instalowania przewodów. ŚRUBY QUICKTURN DO WENTYLATORÓWŚruby do wentylatorów CORSAIR QuikTurn są równie wytrzymałe i bezpieczne jak tradycyjne śruby, dzięki czemu montaż wentylatorów w systemie staje się niezwykle prosty. Przydaje się to, gdy wypełniasz obudowę tej wielkości. WIELE MOŻLIWOŚCI CHŁODZENIAStwórz odpowiedni do swoich potrzeb system chłodzenia dzięki miejscu na 10 wentylatorów 120 mm oraz różnorodnym opcjom montażu dwóch radiatorów o maksymalnym rozmiarze 360 mm. NOWOCZESNY PANEL WEJŚĆ/WYJŚĆ Z PRZODUUmożliwia łatwy dostęp do nowoczesnych złączy, w tym do portu USB 3.2 Gen 2 Type-C, 4 portów USB 3.2 Gen 1 Type-A oraz zintegrowanego gniazda audio i mikrofonowego typu jack.
Zalman P10 micro-ATX Case with Tempered Glass and Panoramic View - White The Zalman P10 micro-ATX case in elegant white combines modern design with a generous panoramic view. Thanks to the large side panel made of tempered glass, the installed components can be perfectly presented, making it the ideal choice for PC enthusiasts and gamers who value aesthetics and performance equally. Main features of the Zalman P10 case in white: Panoramic Tempered Glass Side Window : Provides an unobstructed view of the hardware and gives the system a luxurious look. Compact micro-ATX format : Perfect for powerful, space-saving PC builds. Optimal cooling options : Supports multiple fans and is compatible with water cooling systems for effective heat dissipation. Elegant white design : Fits perfectly into modern setups and stands out with its minimalist, high-quality look. This Zalman P10 case is an excellent choice for those who want to showcase their PC without sacrificing compactness. The panoramic view and elegant white make it perfect for demanding builds in micro-ATX format.
Zalman P40 Prism White Das Zalman P40 Prism White bietet nicht nur ein atemberaubendes Design, sondern auch eine beeindruckende Funktionalität für jeden PC-Enthusiasten. Mit drei robusten, temperierten Glas-Panels auf der Vorder-, Seiten- und Oberseite sorgt es für einen ungehinderten Blick auf Ihre wertvollen Komponenten. Das Chassis ist so konzipiert, dass es ein offenes, modernes Gefühl vermittelt und Ihre Systemkonfiguration perfekt zur Geltung bringt. Hauptmerkmale: Hochwertige Tempered Glass-Panels: 4 mm dick für außergewöhnliche Haltbarkeit und ästhetische Eleganz. Werkzeuglose Bedienung: Entfernen und Befestigen der Glas-Panels ist dank des konischen Mechanismus einfach und sicher. Optimale Belüftung: Das Gehäuse verfügt über ein Mesh-Seitenpanel und ermöglicht den Einbau zusätzlicher Lüfter für eine hervorragende Luftzirkulation. ARGB-Beleuchtung: Prachtvolle RGB-Effekte, die über das AF120 PWM-Lüftermodul hinweg strahlen, um Ihre Hardware im besten Licht erscheinen zu lassen. Vielseitige Erweiterbarkeit: Platz für bis zu drei 120 mm Lüfter an der Seite und ein 360 mm Radiator, um Ihre Kühlung auf das nächste Level zu heben. Perfekt für Ihr Setup: Das Zalman P40 Prism ist ideal für Nutzer, die ein leistungsstarkes, gut belüftetes und ästhetisch ansprechendes Gehäuse suchen, das gleichzeitig Platz für große Komponenten bietet. Es unterstützt bis zu 420 mm lange Grafikkarten und ermöglicht eine einfache Kabelorganisation für ein ordentliches, sauberes System. Verleihen Sie Ihrem PC mit dem Zalman P40 Prism White einen professionellen Look, der durch außergewöhnliche Leistung und Stil besticht.
No. of drive bays: 6 Dimensions: 455 x 205 x 475 mm Weight: 5.27 Other features: - PSU mounting location: bottom of the housing- Power supply tunnel: YES- CPU cooling height: 163 mm- Maximum length of the graphics card: 395 mm- Side panel with a window: YES, made of tempered glass- Filter under the power supply: YES- Filter on the upper panel: YES- Filter on the front panel: YES- Steel thickness: 0.7 mm- Increased space for PSU: 240 mm- Rubber flanges for cable entry holes- All herrings twisted in place of the broken ones- The radiator can not be installed on the front panel
Housing type: Midi Tower ATX Motherboard format acceptable: m-ATX, ATX, Extended ATX, mini ITX 5.25 "bays (external) - 3.5 "bays (internal) 3 pcs 2.5 "bays (internal) 4 pcs The number of expansion slots: 7 +3 pcs. USB socket on the front panel: 1 x USB 3.0, 2 x USB 2.0 Front panel microphone jack: 1 piece. Headphone jack on the front panel: 1 piece. Tool-free assembly: No Height: 487 mm Width: 230 mm Depth: 440 mm Number of fans installed: 5 pcs (2x RGB LED front 20 cm., 1x RGB LED rear 14 cm., 2x top 14 cm) Number of places for additional fans: 0 Maximum length of graphics cards: 370 mm The maximum height of the CPU heat sink: 180 mm Water cooling support: Yes (Front: 360mm; Rear: 120mm) Housing color: Black and silver More information: Dust filter x 3 Tempered glass on the side of the housing LED backlight. Removable side panel 90 degree inverted HD cage Bottom mounted power supply. Cable arrangement system Kit contents: Remote control to control the backlight, screws, cable ties.
Modular big tower in white, with touch-sensitive I/O panel, invertible interior, tempered glass side window, fan control and RGB controller, integrated RGB lighting, including 3x 140-mm fans.
The CORSAIR iCUE 6500X RGB system cabinet is designed for enthusiasts seeking a blend of style and functionality. This mid-tower chassis features a sophisticated dual chamber layout, tempered-glass panels on the front and side, and vibrant RGB fans, all controlled by the CORSAIR iCUE RGB software. It supports a wide range of cooling options, including space for multiple 120 mm or 140 mm fans and radiators up to 360 mm, ensuring your components stay cool under load. The 6500X RGB also offers ample room for high-end components, with support for CPU coolers up to 190 mm, power supplies up to 225 mm, and video cards up to 400 mm in length. Connectivity is no issue, thanks to the inclusion of a USB-C 3.2 Gen 2 port, four USB 3.2 Gen 1 ports, and a headphone/microphone jack on the front panel. Whether you're a gamer, content creator, or PC enthusiast, the CORSAIR iCUE 6500X RGB offers the features and flexibility to build your dream system.
Atos ARGB Mini White Logic Atos is a chassis created to build an efficient and modern gaming PC. Optimal airflow, practical solutions and pre-installed ARGB fans make up its gaming character. READY FOR GAMES Logic Atos is a chassis created to build an efficient and modern gaming PC. Optimal airflow, practical solutions and pre-installed ARGB fans make up its gaming character. INDUSTRIAL STYLE The front panel designed in a confusingly similar industrial style not only fits well with a gaming PC, but also provides great airflow. TEMPERED GLASS As befits a gaming PC case, Logic Atos features tempered glass on the side Cases. It was intentionally limited to the side panel only, in favor of an airy front panel. 160 mm CPU COOLING Space for mounting an air cooler for a CPU with a maximum height of 160 mm is the optimal amount of space for high-performance cooling systems, especially for such a compact case. In addition, the ability to mount graphics cards up to 290 mm allows the installation of most high-performance components available on the market. OPTIMUM AIR SUPPLY The ventilated front panel provides airflow with two, efficiently operating 120mm fans. This allows you to effectively cool the installed components of the computer's interior, positively influencing the culture of their operation and service life. As an option, it is possible to mount two 140 millimeter fans on the front of Cases on your own, in place of the factory-installed ones. ARGB BEAUTY Case for gamers must look nice. That's why the pre-installed ARGB fans add beauty to the case and the gaming stand. The backlight color can be changed at will from the predefined settings using the RESET button on the control panel Cases. HOME & OFFICE Despite its gaming pedigree, Case will also perform well in office tasks and everyday work. The ability to build a versatile and powerful computer is undoubtedly its advantage. OPTIMAL AND PRACTICAL SOLUTIONS The mounting of HDD or SSD drives is obviously thought out here as well. Inside Cases at tunnel level there is a basket for 2 x 3.5" or 2.5" drives. On the motherboard tray, on the other hand, there is the possibility of mounting an additional 1 x 2.5'' drive (installation before mounting the motherboard). SIMPLE INSTALLATION Everything here is well thought out and intuitive. Building a computer in this case is a pleasure and is child's play. CONVENIENT ACCESS TO THE TOP PANEL Convenient access to the top panel, and there are two USB 2.0 and one USB 3.0 connectors, plus HD audio jacks for headphones and a microphone, a power button and a reset button (which allows control of ARGB backlighting). POWER SUPPLY IN THE TUNNEL The small holes under the PSU's mounting location serve a filtering function by restricting dust and dirt from entering Cases. At the same time, they provide air flow to the power supply. 4 PCIe expansion card slots Four slots for PCIe expansion cards. This is the optimal number for mounting, for example, a graphics card and a network card. IDEAL FOR ANY ROOM Supporting mini-ITX and Micro-ATX motherboards, it is a compact solution for building a computer for study, work and play. It takes up less space in the room than other standard Cases ATX motherboards, yet is highly functional.
Volcano Expanse T Apex ARGB Midi Black case Excellent airflow. Roomy design. 4 ARGB fans included. Convenience of installation and expansion. Gaming source Here it is - the source of gaming - the Volcano Expanse Apex ARGB Midi computer case. Because what would a real gaming computer be without a housing in which all the components can be mounted with the utmost convenience and precision? Moreover, without any of the frills found in new housings, you will find a classic in a modern version. There are plenty of practical solutions for powerful gaming computers - an easily removable front filter and one under the power supply, it is possible to install a frame for three additional fans instead of a cable organizer, plenty of space for gaming components and great air circulation. When looking for the best solutions, it is good to go back to the source. Interior design The Volcano Expanse Apex ARGB MIDI case allows you to arrange the interior in such a way that the computer is truly yours! At the height of the motherboard, there is a dedicated space for mounting a cable tray or fan frame. It's up to you to decide how to use the possibilities of arranging the interior of your computer. The tray allows you to organize the cables and keep the inside of the case tidy. This will be appreciated by people who focus primarily on aesthetics and need to keep their computer in good order. And if you are building a real gaming monster and need the best possible cooling of your components, instead of the tray you can install a frame for three additional 120 mm fans. Turn your computer into a refrigerator By unscrewing the metal element designed to organize cables, you can install a dedicated frame for fans and cool the computer even better. In the triangle of dreams The Volcano Expanse T APEX ARGB MIDI case is designed with triangle-shaped panels. Hence the letter T in the name of the housing, which comes from the word triangle. How does it differ from its twin design, Volcano Expanse S ARGB Midi? In this version, due to the different design of the panels, dust filters have been added on the side and top of the housing. And since there is no accounting for taste, the choice is yours. Whichever version you choose, it will be a great decision. Easy! Keeping your computer clean is very important. To minimize dust entering the interior, an easily removable dust filter is located at the front between the front panel and the housing. All you need to do is simply remove the front panel (you don't have to dismantle the entire front) and dismantle the filter to clean it quickly and conveniently. The use of practical solutions will be appreciated by anyone who systematically cares about the cleanliness, durability and functionality of their computer. Cleaning the front panel is easy! Lots of fans Keeping components running cool is paramount. Thanks to this, they work more efficiently and their service life increases. Factory-installed ARGB fans (3 x 140 mm at the front and 1 x 140 mm at the back) ensure good air flow, effectively cooling the graphics card and processor. However, if you want to have even greater configuration options, you can install three additional 120 mm or 2 x 140 mm fans on the top panel. Moreover, there is space on the motherboard mounting wall for three 120 mm fans after installing a special frame instead of the cable tray. In total, you can have up to 10 fans here! Water cooling The housing is suitable for water cooling installation. At the top of the case there is space for a radiator up to 360 mm. The same size cooler will also fit in place of the factory-installed fans on the front of the case. The same cooler (360 mm) can also be mounted on a dedicated frame of the motherboard wall, but its thickness cannot be greater than 52 mm. At the back, there is space for 120/140 mm water cooling. The introduced solutions are intended to create a real gaming machine for every game. And all this in a solid, airy construction. Without screws The times when you had to unscrew panels are long gone. In the Volcano Expanse case, we offer pleasant and simple solutions so that you can build your dream computer with a smile. All panels are mounted with snaps - you don't need any tools to remove the panel and conveniently install the components. Need to add RAM sticks? Blow out the dust from the interior? You can remove the panels with a smooth movement of your hand without having to unscrew them. Controller The case is equipped with an ARGB fan controller. Thanks to this, you can manage their speed and backlight. A total of 9 fans can be connected. At your fingertips The panel with USB/Audio inputs is placed at the top of the case, giving you convenient access to the connectors when the case is placed under the desk. There are 2 USB 3.0 connectors and one USB-C connector on the panel. Classically, there is also a microphone and headphone input, as well as a power button and fan control. Dust filter There is a dust filter under the power supply. You can easily remove and install the filter, which will keep your computer clean while increasing the efficiency and safety of the power supply and other installed components. It was designed for ease of assembly and disassembly, which is facilitated by structural elements equipped with magnets. Access to the filter is possible both from the front and back of the housing. Dust filters are also installed on the top and side panels. A place for your favorite games There will be plenty of space for your favorite games. The housing allows the installation of two 2.5 drives on the motherboard tray. Additionally, you can install two 3.5 mm in the power supply tunnel. With this amount of disk space, you can easily plan to install new games. Removable caps and vertical GPU mounting All PCI/PCIe expansion card caps are removable. Players will also appreciate the possibility of vertically mounting the graphics card, because the metal frame in which the caps are placed can be unscrewed.
