Dimensions: 201 x 435 x 435 mm (W x H x D) Material: Steel, Tempered Glass Weight: approx. 5.75 kg Colour: Black Form Factor: E-ATX (up to 279 mm wide), ATX, Micro-ATX, Mini-ITX Total Possible Fans: 3x 120 mm (Front) 2x 120 mm (Top) 1x 120 mm (Rear) Pre-Installed: 1x 120 mm Molex (Front) 1x 120 mm Molex (Rear) Radiator Mountings: 1x 240 mm (Front) 1x 240 mm (Top) Filter: Top, Bottom Drive Bays: 3x 3.5/2.5" (internal) Power Supply: 1x Standard ATX up to 200 mm (optional) Expansion Slots: 7 I/O Panel: 2x USB 2.0 (internal connection) 1x USB 3.0 (internal connection) 1x Audio In/Out Maximum GPU Length: 380 mm Maximum CPU Cooler Height: 160 mm
Showcase your hardware perfectly with the Phanteks Evolv S2 PC case. The spacious panoramic design with glass front and sides always gives you a clear view of your components—ideal for eye-catching builds with RGB lighting and custom water cooling. Black midi-tower with panoramic design Efficient cooling options with up to seven fans and radiator support up to 360 mm Supports motherboards up to E-ATX size with back-connect design Space for graphics cards up to 395 mm and CPU coolers up to 175 mm in height Clean look thanks to hidden cabling Four integrated RGB fans Phanteks Evolv S2: Midi-tower with panoramic design The Phanteks Evolv S2 midi-tower offers the perfect balance between size and functionality. With ample space for powerful hardware and efficient cooling, it’s the ideal choice for gaming and workstation builds. Optimal cooling with fans and radiators To keep your hardware cool under any load, the Phanteks Evolv S2 can accommodate up to seven fans. The top and bottom each support the installation of three 120 mm fans, while the rear can hold a 120 mm fan. To get you started, four 120 mm fans are already pre-installed—three at the bottom and one at the rear. If you prefer water cooling—whether AiO or custom—you can also install a radiator. The top supports a radiator up to 360 mm in size. Installing your hardware The case supports the installation of graphics cards up to 395 mm in length. Motherboards up to E-ATX format are supported. The new back-connect design motherboards are also compatible, allowing for clean cable management and an upgraded setup. The CPU cooler should not exceed 175 mm in height. Up to four drives can be installed to store your programs and games.
Chassis INTER-TECH IT-503 Desktop, Mini-ITX, µATX, 2xUSB3.0, 2xUSB2.0, no PSU, Black Cabinet Form Factor Desktop Mainboard Form Factor Micro ATX/Mini-ITX Quantity of Mainboards Supported 1 Supported Mainboard Form Factor Micro ATXMini-ITX Number of 3.5-inch Internal Drive Bays 1 Number of 3.5-inch External Drive Bays 1 Number of 5.25-inch External Drive Bays 1 Number of 2.5-inch Internal Drive Bays 1 Number of Expansion Slots 4 Maximum Fans Supported Quantity 1 count USB3.0 2 (USB 3.0 (type A)) USB2.0 2 (4-pin USB (type A)) Microphone-In 1 (3.5-mm minijack) Headphones 1 (3.5-mm minijack) Power Device Location Internal Power Device Maximum Quantity Supports 1 Included Accessories 3.5" Bay Adapter Case Material Steel Plastic External Colour Black Package Type Retail Depth (mm) 380 mm Height (mm) 340 mm Width (mm) 105 mm Nominal Weight 2.98 kg Warranty Products Returnable Yes Warranty Term (month) 24 month(s) Warranty Validation Criteria Serial Number Pack Weight Brutto (kg) 3.63 kg Pack Weight Netto (kg) 0.65 kg Pieces in pack 1 Box Weight Brutto (kg) 3.63 kg Retail Packaging Net Weight Carton 0.6 kg Retail Packaging Net Weight Plastic 0.05 kg Packs in Box 1
With the D32 series, Jonsbo appeals to everyone who wants to build their system in a space-saving manner. The D32 STD PC case, compared to the D32 PRO, is aimed at the midrange and budget segments by focusing on key features such as back-connect support or minimal front I/O. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for back-connect motherboards Mesh side panel provides a subtle appearance Plenty of room for cooling solutions allows the installation of high-performance hardware Dust filter protects your hardware from annoying dust particles The Jonsbo D32 STD Mesh: A space-saving and discreet case for a variety of hardware Whether it's a midrange HTPC or a high-end PC—you'll find a comfortable fit for all kinds of builds in the Jonsbo D32 STD Mesh. Despite its compact size, the case accommodates graphics cards up to 365 mm in length and CPU coolers up to 164 mm in height. This means that, even with the compact design, your hardware will be adequately cooled. Together with up to six 120 mm fans, or a combination of one 120 mm fan and four 140 mm fans, the case ensures exceptional airflow inside. No cable clutter with back-connect With back-connect motherboards like the BTF series from ASUS, the PROJECT ZERO series from MSI, or the Stealth series from GIGABYTE, the case remains virtually free from visible cable clutter, even in this small footprint. Since most power and connector cables can be attached to the back of the motherboard, you can skip elaborate cable management and still enjoy a clean look inside your case. Strong cooling in a small space To ensure your powerful hardware is properly cooled even in this compact case, Jonsbo has developed an optimal cooling solution for the space available. With six 120 mm fans for ample airflow, a large dual-tower CPU cooler, or even a 240 mm AiO cooler, your hardware will remain cool even under heavy load. The dust filter at the bottom and the mesh-design side panels make sure your hardware stays free from dust and dirt. As a result, your temperatures always remain at optimal levels and the lifespan of your components is extended.
Especially with compact cases equipped with powerful gaming hardware, the focus should be on optimal cooling. With the Meshlicious, Lian Li's subsidiary Ssupd (Sunny Side Up Design), in collaboration with Ncase, presents an exceptionally small Mini-ITX case whose front, top, and side panels are all made entirely of fine mesh, ensuring virtually unobstructed airflow. The interior is also extremely versatile thanks to its clever design. Graphics cards up to 4 slots high can be installed behind a Mini-ITX motherboard. There is also space for large radiators and numerous data drives, which can be powered by either an SFX or ATX power supply — all in a volume of just 14.67 liters. The features of the Ssupd Meshlicious Full Mesh PCIE 5.0 Edition Mini-ITX Case: Extremely compact Mini-ITX case for high-performance gaming hardware Front, top, and side panels made from fine mesh for optimized airflow Supports GPUs up to 4 slots high and 336 mm long Space for two 140 mm fans or a 280 mm radiator at the front Includes a PCIe 5.0 riser card Compatible with ATX or SFX format power supplies Room for up to two 3.5-inch or seven 2.5-inch drives I/O panel with USB-C 3.1 and USB 3.0 Type-A Ssupd Meshlicious: Simple but functional design Externally, the Ssupd Meshlicious stands out at first glance due to its particularly compact SFF format and its extensive mesh panels. The top, front, and both side panels are made from fine mesh, which provides ample fresh air intake while also being light-permeable. All panels can be easily removed thanks to four pins on each, making the installation of high-end gaming hardware easier. The minimalist I/O panel on the lid features a USB-C 3.1 port, a USB 3.0 Type-A port, and an LED-lit power button. The motherboard connections are accessible as usual from the back of the case. On the inside, the Ssupd Meshlicious proves to be highly adaptable. Those who prefer a powerful gaming setup can install a graphics card up to 4 slots high and 336 mm long vertically behind the motherboard tray. Ssupd provides a PCIe 5.0 riser card for this purpose. The GPU ports then face downward and are accessible via an opening. The cable connections must be angled, and an appropriate HDMI cable is included. Versatile and thoughtfully designed In this configuration, the front can accommodate up to two 140 mm fans or a 280 mm radiator. There is 53 mm of space for CPU coolers, as the motherboard tray can be repositioned. By reducing the GPU height to three or two slots, the motherboard tray can be moved back to make room for CPU coolers up to 73 mm high. Alternatively, a compact 2-slot graphics card of up to 211 mm in length can also be installed horizontally, though this comes at the expense of the front radiator. Below it, a provided bracket can be attached to hold two 3.5-inch or four 2.5-inch drives. When using an optional power supply, you can choose between ATX, SFX, or SFX-L formats. The latter frees up space for another 2.5-inch drive. At the bottom, in both configurations, two 2.5-inch drives can be installed in this versatile and stylish Mini-ITX case.
Vielseitiger Midi-Tower in Grau, Front- und Seitenteil aus Tempered Glass, mit Reverse Mode und hochkanter Grafikkartenmontage, für bis zu 10 Lüfter, 1x USB 3.1 Typ C / 2x USB 3.0 Typ A
Internal 2x 2.5 "/ 3.5" (cross, drive rails), 2x 2.5 ", Front I / O 1x USB-A 3.0, 2x USB-A 2.0, 1x headphones, 1x microphone, PCI slots 7, Fan (front) 2x 120mm or 3x 120mm (optional), Fan (rear) 1x 120mm, Fan (top) 2x 120mm (optional), Fan (other) 2x 120mm (optional), Radiator sizes 120 / 240mm front, Motherboard up to ATX, Power supply ATX (max 180mm deep), Power supply position below, CPU cooler up to max. 156mm height, Graphic cards up to max. 330mm, Color black, inside black, Dimensions (WxHxD) 189x451x412mm, Volume 35.12l, Weight 4.00kg, Special features cable management, dust filter, W/O PSU
No. of drive bays: 4 MOLEX power connectors: 0 Floppy power connectors: 0 SATA power connectors: 0 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 0 PCI-E 8-pin power connectors: 0 Number of power supply connector 4-pin 12V: 0 Number of power supply connector 4+4-pin 12V: 0 8-pin 12V power connectors: 0 Weight: 6.1
MidiTower, M/B Type mini-ITX/m-ATX/ATX, USB 3.0 x2, RGB LED Switch, Reset Button, Audio In & Out (Supports AC97 / HD Audio), w/o PSU, Dimensions 480x210x435mm
No. of drive bays: 9 Weight: 6.46 Other features: The maximum length of the PSU 190 mmMaximum CPU cooling height 165 mmMaximum length of the GPU graphics card 380 mm
The ASUS A31 PLUS ATX case offers support for hidden-connector motherboards, 360mm radiators, and 380mm graphics cards, with Black or White color options, four pre-installed ARGB fans, and clean cable management. Ready for Hidden Connectors: Built for motherboards featuring hidden connectors to optimize cable management for a clutter-free setup. Broad Compatibility: The A31 PLUS supports up to 360mm radiators combined with fans of up to 80mm thick, plus graphics cards up to 380mm in length and CPU air coolers with heights of up to 165mm. Panoramic Design: Tempered glass panels on the front and side offer unobstructed views of the main chamber. 8° Angled Base: The golden angle combines functionality and aesthetics, enhancing airflow efficiency for better thermal performance while widening the viewing angle for a more immersive experience.
Compact gaming case, made of high-quality steel, for SFX PSUs and Mini-ITX/Micro-ATX motherboards (Intel and AMD), GPU up to 363 mm and 2x 2.5-inch drives.
Showcase-Gehäuse für WaKü-Enthusiasten, für Mini-ITX/DTX-Mainboards, mit integrierter Distroplate aus Acryl, vertikale Installation von GPUs bis 300 mm, für 240 mm x 30 mm Radiatoren, 13x 2,5-Zoll- und 1x 3,5-Zoll-Festplatten, Seitenwände aus Aluminium
Midi-tower case, with tempered glass side panel, top and front with mesh, three integrated PWM-ARGB fans, subtle ARGB lighting with integrated control.
"Zalman T6 ATX Mid Tower PC korpus koos 120 mm ventilaatori ja ODD-ga on ideaalne valik mängijatele ja tehnikahuvilistele, kes otsivad usaldusväärset ja stiilset korpust oma PC komponentide jaoks. See Mid Toweri korpus on elegantse ja minimalistliku disainiga, mille must väliskuju sobib hõlpsasti mis tahes konfiguratsiooni, pakkudes samas piisavalt ruumi riistvarakomponentidele. See toetab ATX, Micro-ATX ja Mini-ITX emaplaate, mistõttu ühildub see paljude erinevate konfiguratsioonidega. Korpusesse on eelnevalt paigaldatud 120 mm tagumine ventilaator, mis hõlbustab tõhusat õhuvoolu ja jahutusjõudlust kohe karbist väljudes, hoides teie süsteemi koormuse all sujuvalt töös. Nende jaoks, kes vajavad täiendavat jahutust, on korpusel mitu ventilaatori kinnituspunkti, mis tagavad parema temperatuuri kontrolli. Lisatud optilise kettaseadme (ODD) pesa muudab selle mitmekülgseks kasutajatele, kes vajavad endiselt kettamälu funktsionaalsust, ning lisab kaasaegsetele arvutitele nostalgia hõngu. Sees pakub Zalman T6 nutikat paigutust koos spetsiaalse kaablijuhtimise kohaga, mis mitte ainult ei paranda esteetikat, vaid optimeerib ka õhuvoolu kogu korpuses. See toetab kuni 280 mm pikkuseid videokaarte, kuni 165 mm kõrguseid protsessorijahuteid ja kuni 180 mm pikkuseid toiteallikaid, võimaldades võimsaid konfiguratsioone. Esipaneel pakub olulisi ühendusvõimalusi, sealhulgas USB 3.0 ja USB 2.0 pordid, samuti audiopistikuid, mis võimaldavad mugavat juurdepääsu välisseadmetele ja multimeediaseadmetele. Seadmepesa tööriistadeta disain lihtsustab paigaldus- ja uuendamisprotsesse, muutes selle kasutuse lihtsaks igasuguse kogemustasemega disainerite jaoks. Kokkuvõttes ühendab Zalman T6 ATX Mid Tower funktsionaalse disaini ja praktilised omadused, mis teeb sellest täiusliku valiku tasakaalustatud ja suure jõudlusega lauaarvuti jaoks.
Umrüstkit für gängige Tower-Gehäuse, bestehend aus einem Riser-Kabel und einer PCI-Slot-Blende, für den vertikalen Einbau der Grafikkarte, nicht kompatibel mit Mini-ITX-Gehäusen
Tootjainfo: http://kolink.eu/Home/case-1/micro-atx/citadel-mesh-rgb.html Mõõtmed: 230 x 375 x 400 mm (L x K x S) Kasti mõõtmed: 285 x 430 x 460 mm (L x K x S) Materjal: Teras, karastatud klaas, võrk, plastik Pakend: EPE vaht Kaal: umbes 5,3 kg Värv: must Kujutegur: Micro-ATX, Mini-ITX Võimalikke fänne kokku: 2x 120 mm (ees) 2x 120 mm (katus) 1x 120 mm (taga) Eelinstallitud: 2x 120 mm (ees) PWM Radiaatori kinnitus: 1x 280 mm (ees), 1x 240 mm (üleval) Filter: katus, põhi Sõidupesad: 2x 3,5 / 2,5 "(sisemine) 3x 2,5 "(sisemine) PSU: 1x standardne ATX (valikuline) Laienduspesad: 4 I / O-paneel: 1x USB 2.0 (sisemine ühendus) 2x USB 3.0 (sisemine ühendus) 1x heli sisse / välja RGB / lähtestamise lüliti GPU maksimaalne pikkus: 345 mm (AIO kasutamisel 320 mm) Maksimaalne protsessori jahuti kõrgus: 190 mm Maksimaalne PSU pikkus: 200 mm
Tootjainfo: http://kolink.eu/Home/case-1/midi-tower-2/inspire-k7.html Mõõtmed: 190 x 440 x 400 mm (L x K x S) Kasti mõõtmed: 242 x 481 x 437 mm (L x K x S) Materjal: Teras, karastatud klaas, võrk, plastik Kaal: umbes 5,0 kg Värv: must Kujutegur: ATX, Micro-ATX, Mini-ITX Võimalikke fänne kokku: 3x 120 mm (ees) 2x 120 mm (katus) 1x 120 mm (taga) Eelinstallitud: 1x 120 mm (tagumine) ARGB Radiaatori kinnitus: 1x 280 mm (ees) Filter: katus, põhi Sõidupesad: 2x 3,5 / 2,5 "(sisemine) 3x 2,5 "(sisemine) PSU: 1x standardne ATX (valikuline) Laienduspesad: 7 I / O-paneel: 2x USB 2.0 (sisemine ühendus) 1x USB 3.0 (sisemine ühendus) 1x heli sisse / välja RGB / lähtestamise lüliti GPU maksimaalne pikkus: 335 mm (AIO kasutamisel 310 mm) Maksimaalne protsessori jahuti kõrgus: 160 mm Maksimaalne PSU pikkus: 180 mm
Showcase-Gehäuse für WaKü-Enthusiasten, für XL-ATX-Mainboards, mit integrierter Distroplate aus Acryl, Grafikkarten bis 500 mm, Platz für 360 mm x 60 mm Radiatoren, 4x 2,5-Zoll-Festplatten, Seitenwände aus Aluminium
