Horizon ARGB FLOW Midi White Three 140 mm ARGB fans are installed in the case at the front, pushing air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. 3 140 mm ARGB fans pre-installed on the front of the case. 1 120 mm ARGB fan pre-installed on the rear of the case. Glass side panel in the form of hinged doors. Airy front and top panels. 2 x USB 3.0 and 1 x USB-C. Screw-out PCI-E slot brackets. Possibility of mounting E-ATX motherboards. Ready for water cooling. Power supply tunnel. Available in fashionable white or elegant black. Four dust filters at the bottom, top, front and side of the case. Easily removable mesh on the front. Space for 4 hard drives (in a configuration of 2 SSD / 2 HDD or 3 SSD / 1 HDD or 4 SSD). ARGB fan controller. Your dream case is here, not over the horizon. MODECOM Horizon is one of those cases that fully meets the need for a decent, solidly made and functional computer case. This classic-looking case has a lot to offer. There are three 140 mm ARGB fans installed as standard at the front and one 120 mm ARGB at the back of the case. In addition, inside you will find plenty of space even for E-ATX boards, high CPU cooling and long graphics cards. And all this is closed behind a glass panel in the form of a door, surrounded by airy mesh panels with dust filters. The whole thing is enclosed in one, perfectly designed MODECOM Horizon case. Don't close yourself off to new things The side panel made of tempered glass in the form of an opening door is the very convenience of assembling and cleaning the computer. You can easily and conveniently open the door and assemble the set, replace RAM, graphics card and other components. There is no simpler and more convenient solution for assembling and modifying the interior of the computer and cleaning it, like the one used in the MODECOM Horizon case. Tempered glass, in turn, allows you to expose the installed graphics card and other expensive components. Nothing can stop this wind The case has three 140 mm ARGB fans installed on the front, which force air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. You get a case ready to use right out of the box, all you need to do is mount the components in it and work on a well-cooled and ventilated computer. Create a storm But that's not all, you can install additional 3 120 mm fans or 2 x 140 mm on the top of the case yourself. There is also the possibility of mounting two 120 mm fans on the motherboard wall. A computer configured in this way will be optimally cooled, ensuring that components operate at low temperatures, while contributing to their longer lifespan. Ready for anything The case is adapted to mount E-ATX boards. The wide possibilities of arranging and expanding the computer will work well in both gaming computers and professional solutions. The unlimited freedom of computer configuration allows for the installation of modern components with the possibility of further expansion. Games and programs will find their place here The MODECOM Horizon case has space for 4 hard drives. Two 2.5 SSD drives will find their place on the motherboard tray. Placed in a convenient place for connection, they will work great as media for games and programs. The disk basket in the power supply tunnel allows for the installation of two 3.5 HDD drives or a configuration of 1 x 2.5 SSD and 1 x 3.5 HDD. You can also simply put on 2.5 SSD drives and mount two such drives in the power supply tunnel. If you add space for M.2 drives on the motherboard, the MODECOM Horizon computer will become a real storage for games and documents.
Zalman P50 DS ATX Case with Tempered Glass and Panoramic View - Black The Zalman P50 DS ATX case in black is the perfect choice for demanding gamers and PC enthusiasts looking for an optimal mix of style and performance. With a large Panoramic View side panel made of tempered glass and a spacious interior, this case offers space for powerful components and showcases them in style. Main features of the Zalman P50 DS case: Panoramic Tempered Glass Side Panel : Allows a clear view of your hardware and gives the system a premium and professional look. Spacious ATX Format : Compatible with ATX, Micro-ATX and Mini-ITX motherboards, ideal for complex and powerful builds. Efficient Cooling : Support for multiple fans and water cooling for maximum heat dissipation and stability under load. Stylish black design : The timeless black blends perfectly into any environment and gives the setup a sophisticated finish. The Zalman P50 DS case is the ideal choice for anyone looking for an ATX case with generous space and elegant presentation. The combination of panoramic view and high-quality tempered glass makes it the perfect basis for high-end PC builds.
Evolv X2 Redefine the desktop computer The Evolv X2 redefines the desktop computer with its see-through glass design, aluminum interior, and powerful vertical cooling solution. The entire chassis floats above its base, drawing in surrounding air and channeling it efficiently through the GPU and CPU. Hot air is expelled through the top ventilation, enhancing thermal performance. The interior of the Evolv X2 has been carefully designed to blend with the hardware components for a fully integrated look, with all cooling components sitting flush into the top and base. The integrated lighting and high-quality aluminum internal panels add flair to your system.
Obudowa do budowy wydajnych komputerów mid tower 5000T Przyciągnij uwagę za pomocą wyjątkowej profilowanej konstrukcji obudowy CORSAIR 5000T, w której możesz zbudować idealny system oparty na płycie głównej z odwróconymi złączami. Elegancka stalowa obudowa o wyjątkowym kształcie Działa z płytami głównymi z odwróconymi złączami Zdejmowane panele przedni i górny z siateczki umożliwiające intensywny obieg powietrza Mieści do 10 wentylatorów 120 mm lub 4 wentylatorów 140 mm oraz kilka radiatorów 360 mm Czyste płótno - brak fabrycznie zamontowanych wentylatorów i podświetlenia System organizacji okablowania RapidRoute EFEKTOWNE LINIEZrób piorunujące wrażenie za pomocą tej eleganckiej obudowy o wyjątkowym wyglądzie. Rozwiązania ułatwiające budowę komputera pozwalają wykorzystać cały potencjał, aby konstrukcja była tam samo imponująca wewnątrz, jak i na zewnątrz. OGROMNY POTENCJAŁ CHŁODZENIAPrzestronne wnętrze pomieści nawet 10 wentylatorów 120 mm albo 4 wentylatory 140 mm, a także kilka radiatorów o wysokości 60 mm, w tym z przodu lub boku - o rozmiarze 360 mm oraz w górnej części o rozmiarze 360 mm w konfiguracji push/pull. PEŁNA FUNKCJONALNOŚĆTa obudowa ma wszystko, czego potrzeba do budowy bardzo wydajnego komputera. ZDEJMOWANE PANELE PRZEDNI I GÓRNYSiateczkowe panele o wyjątkowej konstrukcji, które można łatwo zdjąć, aby dostać się do środka, umożliwiają intensywny przepływ powietrza. DWA OBSŁUGIWANE BEZNARZĘDZIOWO PANELE BOCZNE NA ZAWIASACHŁatwy dostęp do systemu dzięki panelom na zawiasach: jednemu ze szkła hartowanego, eksponującemu wszystkie komponenty, oraz jednemu ze stali z drugiej strony. SYSTEM PROWADZENIA PRZEWODÓW CORSAIR RAPIDROUTEUmożliwia szybkie i łatwe poprowadzenie przewodów przez obszerny 46-milimetrowy ukryty kanał pod płytą główną. OBSŁUGA PŁYT GŁÓWNYCH Z ODWROTNYMI ZŁĄCZAMISprawdzona pod kątem zgodności z płytami głównymi ASUS BTF, MSI Project Zero oraz Gigabyte Project Stealth, które mają złącza z tyłu, dzięki czemu nie psują widoku przez podłączone kable. PROSTA KONSTRUKCJANowoczesna konstrukcja w popularnym formacie obudowy komputerowej 5000T ma wygodne rozwiązania, które ułatwią Ci pracę. PUDEŁKO NA ŚRUBY WIELOKROTNEGO UŻYTKUDzięki dodanemu w zestawie pudełku, w którym wszystkie potrzebne Ci śruby będą bezpiecznie zamknięte, nie zgubisz już żadnej ważnej śrubki. PRZELOTKI FORMOWANE W DWÓCH CYKLACHDzięki miękkim, gumowym przelotkom wewnętrznym umożliwiającym łatwe przeciąganie kabli oraz twardym gumowym przelotkom zewnętrznym, które pewnie trzymają się na miejscu, możesz uniknąć frustracji podczas instalowania przewodów. ŚRUBY QUICKTURN DO WENTYLATORÓWŚruby do wentylatorów CORSAIR QuikTurn są równie wytrzymałe i bezpieczne jak tradycyjne śruby, dzięki czemu montaż wentylatorów w systemie staje się niezwykle prosty. Przydaje się to, gdy wypełniasz obudowę tej wielkości. WIELE MOŻLIWOŚCI CHŁODZENIAStwórz odpowiedni do swoich potrzeb system chłodzenia dzięki miejscu na 10 wentylatorów 120 mm oraz różnorodnym opcjom montażu dwóch radiatorów o maksymalnym rozmiarze 360 mm. NOWOCZESNY PANEL WEJŚĆ/WYJŚĆ Z PRZODUUmożliwia łatwy dostęp do nowoczesnych złączy, w tym do portu USB 3.2 Gen 2 Type-C, 4 portów USB 3.2 Gen 1 Type-A oraz zintegrowanego gniazda audio i mikrofonowego typu jack.
With the LANCOOL 217 from Lian Li, you bring style, functionality, and performance into perfect harmony. This mid-tower case combines a natural wood look with powerful cooling and offers everything you need for modern PC builds – including pre-installed fans, a flexible layout, and wide motherboard compatibility. Wood meets high-end: Black with walnut accents 5 pre-installed fans: High-performance cooling straight out of the box Back-Connect-ready: Compatible with motherboards featuring rear connectors Flexible power supply mounting: Standard and rotated modes for more space and better airflow Tool-less fan mount: Quick and easy installation thanks to retaining clips Lian Li Lancool 217 in black: A case that combines design and performance demands The LANCOOL 217 impresses with its successful combination of solid steel, tempered glass, and decorative real wood elements. The perforated mesh front not only ensures maximum airflow but also completes the organic design. With its spacious interior layout, the case supports motherboards up to SSI-EEB, GPUs up to 380 mm in length, and CPU coolers up to 180 mm in height. Excellent cooling for high-end hardware The five pre-installed fans provide powerful airflow straight from the factory. You can flexibly choose between a GPU- or CPU-focused cooling scenario by simply adjusting the fan positions. Magnetic dust filters and tool-free installation make assembly easier, keep your setup clean, and ensure you can clean your system quickly and easily. PC case with easy installation of your components Another highlight of the LANCOOL 217 is the removable radiator bracket: It makes installing AIO water cooling with up to 360 mm radiators easier and creates extra space when installing hardware. Two power buttons in different locations make it easier to turn your PC on, depending on whether it sits on or under your desk. Thanks to thoughtful solutions such as the vertically mountable PCIe slot, HDD/SSD combination options, and generous cable management, the LANCOOL 217 is the perfect choice for style-conscious PC enthusiasts with high expectations.
The Montech X5 is a mid-tower case that combines elegant design with solid cooling performance. With a sleek front panel, tempered glass side window, and pre-installed fans, it's the ideal choice for budget-conscious PC setups. Modern mesh front panel with a clean, minimalist look Three 140mm and one 120mm fans pre-installed for instant cooling Tempered glass side window for an unobstructed view of the interior Compatible with E-ATX motherboards and GPUs up to 410 mm in length Spacious interior with tidy cable management Elegant design for any setup Enjoy high compatibility in a compact build with the Montech X5 Mid-Tower. It accommodates large GPUs, powerful cooling systems, and modern cable management—without appearing bulky. The X5 uses a simple front panel without mesh, delivering a clean overall appearance. It's especially suitable for users who value a clear, minimalist look. This case combines performance with style—the RGB lighting delivers an impressive appearance and enhances your entire setup. Whether for a gaming rig or workstation, customizable effects make your PC a real eye-catcher. Solid cooling performance with four fans Keep your components at optimal temperature with the Montech X5, the perfect choice for those who prioritize high-performance cooling. Its airflow-friendly design and optimized airflow architecture ensure ideal cooling, even during long gaming sessions or heavy system loads—a case that perfectly combines performance and cooling. Despite the closed front, four 120mm fans are already installed, providing good basic cooling right out of the box. This means you're ready to go without additional investment. Thanks to the removable dust filters, your case stays free from dust build-up. The filters are easy to clean, so your computer remains optimally cooled at all times. Easy assembly & flexible hardware support The interior offers space for standard ATX motherboards, long graphics cards, and multiple drives. Thanks to its thoughtful structure, installation is quick and straightforward, even for beginners.
With the Lian Li O11 Dynamic Mini V2 Flow, you can make your gaming setup a real eye-catcher: Despite its compact design, this mini case offers a spacious interior with enough room to make your visions a reality. Whether you prefer air cooling, water cooling with an AiO, or vertical installation of your graphics card, this case allows all that and much more. Compact design: Takes up less space on your desk Room for high-end hardware: Generously designed interior for installing powerful hardware Clean cable management: Cable holders and support for motherboards with back-connect design for tidy routing Includes GPU brackets: Allows you to install your graphics card both vertically and horizontally Dust protection: Easy-to-clean dust filters at multiple locations Five pre-installed fans: Three 120 mm fans at the bottom and two 120 mm fans on the side with reverse blades The Lian Li O11 Dynamic Mini V2 Flow: Mini case designed for high-performance gaming hardware Lian Li O11D Mini V2 Flow with sample hardware Equipped with tempered glass on the side and front, the Lian Li O11 Dynamic Mini V2 Flow allows you to showcase your hardware. Thanks to its compact size, it fits easily on your desk and instantly becomes the centerpiece of your gaming setup—without annoying cable clutter inside the case. Clean cable management for a tidy look Lian Li O11D Mini V2 in white with cable straps Thanks to multiple cable holders, the case allows you to route cables cleanly. An integrated holder for the heavy 24-pin ATX cable ensures it stays neat and secure, while cleverly positioned straps keep all other cables bundled together. The drive cages can also be used to hide your cables. This makes cable management effortless—whether you're a beginner building your first gaming PC or a pro who doesn’t want to spend hours organizing cables. Flexible installation for motherboards and AiO water coolers With a vertically adjustable motherboard standoff, the case gives you more flexibility for installing the motherboard and AiO water coolers. You can choose between two motherboard positions: The upper position allows you to mount 240 mm and 360 mm AiO coolers, while the lower position supports a 280 mm radiator as well. Well cooled even under full load Up to nine fans possible Space for two water cooling radiators Mesh panel on the top Dust filter on the bottom The fans and radiators ensure adequate cooling for your gaming hardware, even under full load. A mesh panel and dust filter help reduce dust buildup inside the case, extending the life of your hardware. Lian Li O11D Mini V2 Flow fans The Flow version of the O11D Mini V2 comes with five fans pre-installed. These 120 mm fans are equipped with reverse blades: so you always have a clean look without sacrificing precious airflow. Ready for top performance with space for large GPUs The case interior is designed so that even large graphics cards up to 400 mm fit comfortably—whether installed horizontally or vertically. The included GPU brackets ensure a secure hold in both scenarios. This gives you the freedom to choose your preferred GPU installation. Supports motherboards with Mini-ITX, mATX, and ATX form factors—including models with rear cable management (back-connect design). Combined with thoughtful cable holders and Velcro straps, this results in a tidy, clean look: All connectors are neatly concealed behind the motherboard. Modular I/O panel Lian Li O11D Mini V2 I/O Panel The I/O panel module can be mounted both on top of the case and at the front bottom. This allows you to position the case exactly as you like while always having easy access to the power button and ports. If you mount the panel on top, the bottom cover is also removable—improving airflow.
MSI PRO SHIELD M100P. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Bagerste ventilatorer installeret: 1x 80 mm, Understøttede diametre for bagerste ventilatorer: 80,90 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 166 mm, Dybde: 312 mm, Højde: 354 mm. Pakkevægt: 3,58 kg
The Phanteks XT M3 impresses with a space-saving design that offers you more than enough room for high-end components. With effective cooling and tidy cable management, this case is suitable for everyone—whether you are a casual gamer or an enthusiast. Compact Size: Space-saving case for high-end hardware Effective Cooling: Space for up to nine fans Large Radiator: Supports installation of a 360 mm radiator on the top panel Organized Build: Space for neat cable management Back-Connect Support: Compatible with motherboards featuring back-connect design The Phanteks XT M3: Sleek mini case for your gaming setup Show off your gaming hardware with the Phanteks XT M3—a compact SFF case designed for greatness. Compatible with high-end graphics cards and motherboards with back-connect design, this tower is ready for your modern setup. Phanteks XT M3 case with fans Effectively cooled with fans and radiator The Phanteks case supports the installation of up to nine fans, keeping your build cool under any workload. You can mount three fans on the bottom, directly below the graphics card, to provide extra cooling for your GPU. A 360-mm radiator can also be mounted on the top if you prefer water cooling. In addition to fans and a radiator, the mesh front panel ensures excellent airflow, reducing heat buildup inside your case. Your new gaming PC with clean cable management Laying out cables neatly is not always easy—but with the Phanteks XT M3, cable management becomes effortless. Cutouts in just the right places allow for tidy cable routing. Combined with support for motherboards with a back-connect design, you get an organized build that not only looks great but also improves airflow. Mini-ITX case built for powerful hardware Even a large graphics card fits in easily—the case provides space for a GPU up to 430 mm long. Note that you cannot install fans at the front if you utilize the full length. The CPU cooler should not exceed 175 mm in height, and the power supply should be no longer than 150 mm.
The Phanteks XT M3 impresses with its space-saving design, offering you more than enough room for high-end components. Thanks to efficient cooling and neat cable management, this case is suitable for everyone—whether you’re a casual gamer or an enthusiast. Compact size: Space-saving case for high-end hardware Effective cooling: Supports up to nine fans Large radiator: Accommodates a 360 mm radiator at the top Clean build: Space for neat cable management Back-connect support: Compatible with motherboards featuring back-connect design The Phanteks XT M3: Sleek mini case for your gaming setup Showcase your gaming hardware with the Phanteks XT M3—a compact SFF case made for big ambitions. Compatible with high-end graphics cards and motherboards with back-connect design, this tower is ready for your modern setup. Phanteks XT M3 Case with fans Efficient cooling with fans and radiator The Phanteks case supports the installation of up to nine fans, ensuring a cool build under any load. Three fans can be mounted at the bottom, directly beneath the graphics card, providing extra cooling specifically for your GPU. Additionally, a 360 mm radiator can be installed at the top if you prefer water cooling. Beyond fans and the radiator, the mesh front panel also provides excellent airflow, preventing hot air from accumulating inside your case. Your new gaming PC with clean cable management Laying out cables neatly can be tricky—but with the Phanteks XT M3, cable management is effortless. Cutouts in the right places allow you to route cables cleanly. Combined with support for motherboards with back-connect design, you'll get a tidy build that not only looks great, but also improves airflow. Mini-ITX case built for high-performance hardware Even a large graphics card is no problem—the case offers space for a GPU up to 430 mm in length. Note that you cannot install front fans if you use the full GPU length. The CPU cooler should not exceed a height of 175 mm, and the power supply should be no longer than 150 mm.
Micro-ATX case, innovative front-mounted power supply, supports GPUs up to 430mm, space for up to seven 120mm fans, separate radiator chamber, glass panels on the front and side, includes three 120mm reverse fansThe Phanteks XT V3 combines compact design with ample room for modern hardware. With stylish glass panels and powerful cooling, your gaming setup becomes a true showcase. Compact Micro-ATX case: ideal for modern builds Ample space: supports GPUs up to 430mm in length Optimized for cooling: up to seven 120mm fans or a 360mm radiator Compatible: with back-connect motherboards Showcase design: tempered glass panels on the front and side The Phanteks XT V3: Compact Mini Case with Plenty of Space Phanteks XT V3 Case Thanks to its compact form factor, the Phanteks XT V3 can be easily integrated into a wide range of gaming or professional setups—while still providing excellent support for modern hardware. The spacious interior offers room for Mini-ITX and Micro-ATX motherboards and supports back-connect motherboards. Additionally, high-performance graphics cards fit with ease, as the Phanteks XT V3 features four PCIe slots and accommodates GPUs up to 430mm. The rear chamber of the case also impresses with an innovative design for premium hardware. Instead of the usual position, the power supply has been relocated to the top front. This allows the Phanteks XT V3 to support full-sized ATX power supplies, providing even greater compatibility. Powerful Cooling Phanteks XT V3 The Phanteks XT V3 delivers outstanding cooling performance. There are seven mounting points for 120mm fans – three at the top, three at the bottom, and one at the rear – allowing for efficient airflow configurations. Out of the box, three powerful M25-120 reverse DRGB fans are pre-installed at the bottom, ensuring strong cooling. Additionally, the Phanteks XT V3 features a dedicated top chamber for a 360mm radiator. This makes it easy to install a powerful AIO cooler, keeping even high-end CPUs reliably cool during intense gaming sessions. Showcase Case Phanteks XT V3 With the Phanteks XT V3, you can display both your hardware and your building skills. The rear chamber provides plenty of space for cable management along with smart routing options for a clutter-free system. Completing the look are tempered glass panels on the front and side, giving you an unobstructed view of your components from every angle. Comprehensive I/O Panel Phanteks XT V3 The Phanteks XT V3 provides outstanding support for your gaming setup, thanks to the front I/O panel located at the bottom right. Here, you’ll find both a USB Type-A and Type-C port with USB 3.2 Gen 2x2 standard. Additionally, a 3.5mm combo audio jack is available for connecting your gaming headset.
Strimer Plus V2 Highly customizable addressable RGB extension cables. Create a unique PC look with outstanding quality and material Compatible with L-Connect 3 for personalizing light effects
The HYTE X50 is a stylish midi-tower case designed for demanding PC enthusiasts who want to combine design and functionality. With its innovative internal structure and high-quality workmanship, it targets gamers, streamers, and builders with an eye for detail. Three-chamber layout separates heat sources for optimal airflow Supports up to ten 120 mm RGB fans for exceptional cooling performance 360 mm radiator support on the top and bottom for powerful water cooling Panoramic glass side panel showcases your setup Magnetic cable management system for clean, effortless builds HYTE X50: Innovative cooling concept with clear separation The HYTE X50 utilizes an intelligent three-chamber design that physically separates the GPU, motherboard, and power supply. This allows for unobstructed airflow that efficiently expels heat from the case. With direct airflow to your graphics card, you can keep it cool even in graphically demanding games or during 3D rendering, ensuring it gets consistent air supply. Design meets functionality The case impresses with a curved glass side panel that elegantly showcases your system. The clean, symmetrical design is not only an eye-catcher but also thoughtfully constructed. Radiators up to 360 mm can be installed at the top and bottom, making room for even high-end water cooling systems. Modular interior and easy installation Building your system is made easy thanks to thoughtful features such as magnetically closable cable guides, tool-less front and side panels, and flexible mounting options. In addition, the USB-C port on the front offers lightning-fast access with speeds up to 20 Gbit/s—ideal for modern peripherals and rapid data transfers.
The HYTE X50 is a stylish midi-tower case designed for demanding PC enthusiasts who want to combine design and function. Its innovative internal structure and high-quality build make it perfect for gamers, streamers, and builders who pay attention to detail. Three-chamber layout separates heat sources for optimal airflow. Supports up to ten 120 mm RGB fans for exceptional cooling performance. 360 mm radiator support on both the top and bottom for powerful water cooling. Front and side panels made of mesh for optimal fresh air intake. Magnetic cable management system for effortless, clean builds. HYTE X50: Innovative cooling with clear separation. The HYTE X50 utilizes an intelligent three-chamber design that spatially separates the GPU, motherboard, and power supply. This creates unobstructed airflow, efficiently exhausting heat from the case. With a direct stream of fresh air to your graphics card, you keep it cool even during graphically intensive games or 3D rendering, ensuring a constant supply of air. Design meets functionality. The case impresses with a curved mesh panel on the side, reliably supplying your system with air. Its clean, symmetrical design is both visually striking and thoughtfully constructed. Radiators up to 360 mm can be installed at the top and bottom, providing space for high-end water cooling setups. Modular interior and easy installation. Building your system is made extremely easy by thoughtful details such as magnetically sealed cable guides, tool-free front and side panels, and flexible mounts. Additionally, the USB-C port on the front offers lightning-fast access with up to 20 Gbit/s — ideal for modern peripherals and fast data transfers.
Volcano Space XL Full Tower Case black Youre investing in a top-tier processor, a powerful graphics card, fast RAM, and a solid motherboard, so why would you hide them from yourself and other household members? The MODECOM Volcano Space XL Full Tower is a case designed so that your computer can finally look truly impressive. The front and side tempered-glass panels create a full visual showcaselike hardware displayed in a glass cabinet. Every detail, every ARGB effect (if you install illuminated fans), and every line of your configuration is visible and highlighted by this majestic chassis. MODECOM Volcano Space XL was designed for those who love personalization and perfect internal cable management, while also needing a spacious Full Tower case. Support for motherboards with reversed connectors allows you to build a modern interior without having to expose cables. Thanks to snap-on panels, you gain quick access to the inside. Installing components, upgrading hardware, and cleaning the interior become even easier. The spacious interior gives you full freedom: large E-ATX boards, robust water cooling (up to 420 mm), long graphics cards, and all the components you need for your gaming setup. With the MODECOM Volcano Space XL, your computer will know no limitsand it will look exactly the way it deserves. If you love technology, need plenty of room for expansion, and want your hardware always within sight, the MODECOM Volcano Space XL Full Tower is made for you. Especially in the Volcano Space XL NF version, which gives you complete freedom to configure cooling according to your preferences, as it comes without pre-installed fans. Because bigger can do more.
Das View 270 Plus WS ARGB ist mit Hartglasplatten an der Vorder- und Seite des Gehäuses ausgestattet, um optimale Betrachtungswinkel für Ihr System im Inneren zu bieten. Das Gehäuse unterstützt Radiatoren von bis zu 360 mm auf der Oberseite des Gehäuses und kann den Kühldedarf einiger der anspruchsvolleren Systeme decken, während es gleichzeitig ein ansprechendes Erscheinungsbild beibehält, um Ihre Komponenten zur Geltung zu bringen. Das View 270 wird mit drei 120-mm-ARGB-Lite-Lüftern geliefert, von denen zwei seitlich angebracht sind, und ein weiterer an der Rückseite des Gehäuses, um eine Luftabfuhr zu bieten. Daisy-Chain Verbindungen vereinfachen die Verkabelung und die Beleuchtung kann über die Motherboard-Software von Asus, Gigabyte, MSI und ASRock gesteuert werden. Das View 270TG Plus kann bis zu zwei 2,5Zoll-SSDs oder zwei 3,5-Zoll-HDDs unterstützen, an jeweils einem dedizierten Speicherort und jeweils einem gemeinsam genutzten Speicherort. Zwei USB 3.0-Anschlüsse, ein USB 3.2 Gen 2 Typ C und HD-Audio Anschlüsse sind auf der Oberseite angebracht, um bei Bedarf direkten Zugriff zu ermöglichen.
Mit seinem stilvollen Stoffüberzug unter dem Seitenteil und der Front aus gehärtetem Glas, verleiht das AK7 ARGB deiner Gaming-Hardware eine besonders elegante Note. Mit vier vorinstallierten ARGB-Lüftern und einem durchdachten Lufteinzug über die Seite ist neben der Optik auch für einen jederzeit berauschenden Airflow gesorgt. Das ATX-Gehäuse bietet zudem moderne Anschlüsse, eine breite Kompatibilität mit BTF-Mainboards und jede Menge Platz für leistungsstarke Technik. Das AK7 ARGB setzt mit einer modernen Glasoptik Hardware perfekt in Szene. Ein besonders edler Touch wird ihm zusätzlich durch den stilvollen Stoffüberzug an der Unterseite verliehen. Im AK7 ARGB sind bereits vier 120-mm-ARGB-PWM-Lüfter verbaut, von denen drei invertiert sind, um die Luft von der Seite ins Gehäuse zu saugen und so für einen optimalen Airflow zu sorgen. Das Gehäuse bietet dabei Platz für insgesamt bis zu neun Lüfter. Wer sein AK7 ARGB mit einer Wasserkühlung betreiben möchte, kann dies selbstverständlich tun und neben einem 360-mm-Radiator sogar einen weiteren Radiator von bis zu 280 mm unterbringen. Das AK7 ARGB ist nicht nur mit herkömmlichen Mini-ITX-, Micro-ATX- und ATX-Mainboards kompatibel, sondern unterstützt auch nahezu alle BTF-Formate. Für eine breite Anschlussvielfalt sorgt das AK7 ARGB mit modernen TRRS- und USB-C-Anschlüssen. Eine RGB-Steuerung ermöglicht zudem den Anschluss von bis zu vier LED-Elementen und vier PWM-Lüftern. Mit einer maximalen Grafikkartenlänge von 410 mm bietet das AK7 ARGB auch Platz für große Karten, die durch einen gummierten Grafikkartenhalter zusätzlich gestützt werden. CPU-Kühler können eine Höhe von bis zu 170 mm und Netzteile eine Länge von bis zu 235 mm haben. Zudem finden bis zu zwei 3,5“-HDDs oder vier 2,5“-SSDs im Gehäuse Platz.
Das MasterFrame 500 Mesh ist ein hochwertiges Midi-Tower-Gehäuse mit offenem Rahmen für leistungsstarke Komponenten, fortschrittliche Kühlung und grenzenlose Anpassungsmöglichkeiten. Es basiert auf der FreeForm 2.0-Designphilosophie, unterstützt ATX- bis E-ATX-Motherboards und bietet vollen Zugriff auf modulare Designdateien. Dank verbesserter Mesh-Panels für eine verbesserte Luftzirkulation können PC-Builder, Modder und Entwickler die Grenzen des PC-Designs erweitern. Das Gehäuse verfügt Platz für bis zu acht Lüfter und mehrere Radiatorgrößen (bis zu 360 mm) und bietet so eine überragende Wärmeleistung. Die mitgelieferte GPU-Halterung verhindert ein Durchhängen der GPU und sorgt für Stabilität bei intensiven Spielen oder Hochleistungs-Workloads, wodurch eine saubere und sichere Konstruktion geboten wird.
Das MasterFrame 600 Mesh ist ein hochwertiges Midi-Tower-Gehäuse mit offenem Rahmen für leistungsstarke Hardware, extreme Kühlung und umfassende Anpassungsmöglichkeiten. Es wurde mit Blick auf FreeForm 2.0 entwickelt, unterstützt ATX- bis E-ATX-Motherboards und bietet vollen Zugriff auf modulare Designdateien, sodass Benutzer unbegrenzt bauen und weiterentwickeln können. Das Gehäuse verfügt Platz für bis zu zehn Lüfter und mehrere Radiatorgrößen (bis zu 420 mm) und bietet so eine überragende Wärmeleistung. Die mitgelieferte GPU-Halterung verhindert ein Durchhängen der GPU und sorgt für Stabilität bei intensiven Spielen oder Hochleistungs-Workloads, wodurch eine saubere und sichere Konstruktion geboten wird.
PC case Volcano AQ400 ARGB MIDI BLACK The MODECOM Volcano AQ400 ARGB MIDI is a representative of the Volcano AQ case series, characterized by an eye-catching design with rounded shapes of the front panel (in this case, a perforated metal panel), support for installing motherboards with reversed connectors, four 120 mm ARGB fans included as standard with an ARGB lighting controller, and support for water-cooling radiators up to 420 mm, as well as numerous perforations on the side panels to ensure efficient cooling performance. A distinctive feature of the AQ400 version is the LCD screen located on the side of the case, which allows users to display images, play videos in MP4 format, or monitor temperatures and workload of the processor, graphics card, and RAM usage.All these features are complemented by two USB 3.0 ports and one USB-C port (USB 3.2 Gen 2). This is a case designed to showcase components and personalize the computer to your own style.
PC case Volcano AQ200 ARGB MIDI BLACK The MODECOM Volcano AQ200 ARGB MIDI is a representative of the Volcano AQ case series, characterized by an eye-catching design with rounded shapes of the front panel made of tempered glass, support for motherboards with reversed connectors, four 120 mm ARGB fans included as standard along with an ARGB lighting controller, and support for water cooling radiators up to 420 mm, as well as numerous perforations on the panels to ensure efficient cooling of the computer. A distinctive feature of the AQ200 version is the LED display, which allows monitoring the temperature and workload of the processor, graphics card, and RAM memory. All these advantages are complemented by two USB 3.0 ports and one USB-C port (USB 3.2 Gen 2) located on the side panel. This is a case designed to showcase components and give full control over monitoring their performance.
Neli tehasesse paigaldatud pöörlevat ventilaatorit • Toetab kuni 412 mm pikkuseid graafikakaarte • Tööriistavaba ligipääs ja eemaldatavad paneelid • Lihtne kaablite haldamine ja korras sisemus • USB Type-C ja heliliides esipaneelil
The Corsair FRAME 4000X RS PC case was specially designed for premium airflow and ensures efficient cooling of your components. Thanks to the well-thought-out mesh panels and optimized airflow, your PC system stays cool and powerful even under heavy load. Black mid tower with built-in RGB front Multiple fan and radiator mounts for effective cooling performance Supports motherboards up to E-ATX, including back-connect designs Space for graphics cards up to 405 mm and CPU coolers up to 170 mm in height Includes 4x RS120 fans Corsair FRAME 4000X RS: RGB PC case with built-in fans The Corsair FRAME 4000X RS mid tower offers the perfect balance between size and functionality. With ample space for powerful hardware and efficient cooling, it is the ideal choice for gaming builds. Extensive cooling options with fans and radiators To keep your hardware cool under any workload, up to 13 120 mm fans can be installed simultaneously in the Corsair FRAME 4000X RS. The top, front, and side support three 120 mm fans and two 140 mm fans. Two 200 mm fans are even possible at the top. Two additional 120 mm fans can be installed above the power supply shroud, while a further 120 mm or 140 mm fan can be mounted at the rear. An AiO liquid cooling system can also be installed without any problems if you prefer to cool your high-performance hardware with water cooling. Large radiators up to 360 mm can be installed at the top, front, and side, while only 120 mm or 140 mm radiators can be installed at the rear. Four pre-installed fans make getting started easy: three RS120 fans are mounted at the front, with one more at the rear. Installing your hardware The case offers enough space for powerful gaming hardware. It supports graphics cards up to 405 mm. Motherboards up to E-ATX format are supported, including motherboards with rear-facing connectors. The CPU cooler should not exceed a height of 170 mm. A total of three drives can be installed to store programs and games.
