Fractal Design Pop Silent - Torn - ATX Product Type: System cabinet Form Factor: Torn värv: must solid I/O Ühendusi: 2 x USB 3.0 Audio sisend Audio joon-out Supported Motherboards: ATX, Mini-ATX, Mini-ITX System Cabinet Features: kaabel management system, toetab 120 mm radiator in rear, PSU dust filters, toetab Kuni 280 mm radiator in front panel Power Device: No toiteplokk (ATX) mõõtmed (WxDxH): 21.5 cm x 47.35 cm x 45.4 cm kaal: 7.3 kg Manufacturer Warranty: 2-year garantii Designed For: Fractal Design Model D, Type D
Midi Tower Fornax 4000 ARGB case white Professional gaming computer case Easy access - half glass side panel with window Specially designed front panel - "Magic" dust filter. Additional SSD toolless screws with rubber washer Bottom mounting of the power supply
CTE T500 TG ARGB Snow Full Tower Chassis The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support up to a 420mm AIO radiator at the front and a maximum 360mm AIO radiator at the rear. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for centralized thermal efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE T500 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE T500 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. Experience the perfect combination of design and performance with our CTE T500 The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support a maximum of a 420mm AIO radiator at the front and a maximum of two 360mm AIO radiators at the front and rear. There's plenty of room to install cooling components, including front and rear fan brackets, top and right fan vents, bottom fan vent, and shroud vent, and the case can accommodate up to eleven 140mm/120mm fans. Other cool details include removable filters, pump and tank support, and Velcro straps for easy cable management. Our CTE T500 Snow is the perfect choice whether you're looking for a custom liquid cooling setup or a dual AIO setup! Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE T500 TG ARGB's versatile interior features two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Support for dual 360mm radiators Our CTE T500 TG ARGB Snow offers excellent cooling support for custom liquid cooling enthusiasts, allowing users to install up to two 360mm radiators simultaneously at the front and rear. To ensure AIO compatibility, users can install up to one 420mm AIO radiator on the front and up to two 360mm AIO radiator on the front and rear. All your dream cooling components will fit! The CTE T500 Full Tower case has a huge fan and cooler installation capacity: up to eleven 140 mm/120 mm fans and 360 mm AIO coolers in various locations (420 mm AIO cooler at the front). Moreover, equipped front and rear fan brackets and mounting locations on the top, right side and lid ensure easy installation of all desired cooling components. Rock your world with three pre-installed white 140mm CT140 ARGB fans The CTE T500 TG ARGB Snow Full Tower case is equipped with three white 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance. We've tested everything, so you don't have to At Thermaltake, we always stress test our products under harsh conditions to ensure product quality. CTE T500 TG ARGB Snow Full Tower Chassis products have been tested at 100% full load for 30 minutes, with the highest-end CPU, GPU and motherboard at the time of testing, compared to a consumer-style configuration, which allowed us to test how the chassis handles in real-world situations.
ATX case with 270° glass panel, up to ten fans possible, GPUs up to 420 mm / CPU up to 165 mm height, up to three drives possible, radiator up to 360 mm, 1x USB-C / 2x USB-A
Horizon ARGB FLOW Midi Black Three 140 mm ARGB fans are installed in the case at the front, pushing air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. 3 140 mm ARGB fans pre-installed on the front of the case. 1 120 mm ARGB fan pre-installed on the rear of the case. Glass side panel in the form of hinged doors. Airy front and top panels. 2 x USB 3.0 and 1 x USB-C. Screw-out PCI-E slot brackets. Possibility of mounting E-ATX motherboards. Ready for water cooling. Power supply tunnel. Available in fashionable white or elegant black. Four dust filters at the bottom, top, front and side of the case. Easily removable mesh on the front. Space for 4 hard drives (in a configuration of 2 SSD / 2 HDD or 3 SSD / 1 HDD or 4 SSD). ARGB fan controller. Your dream case is here, not over the horizon. MODECOM Horizon is one of those cases that fully meets the need for a decent, solidly made and functional computer case. This classic-looking case has a lot to offer. There are three 140 mm ARGB fans installed as standard at the front and one 120 mm ARGB at the back of the case. In addition, inside you will find plenty of space even for E-ATX boards, high CPU cooling and long graphics cards. And all this is closed behind a glass panel in the form of a door, surrounded by airy mesh panels with dust filters. The whole thing is enclosed in one, perfectly designed MODECOM Horizon case. Don't close yourself off to new things The side panel made of tempered glass in the form of an opening door is the very convenience of assembling and cleaning the computer. You can easily and conveniently open the door and assemble the set, replace RAM, graphics card and other components. There is no simpler and more convenient solution for assembling and modifying the interior of the computer and cleaning it, like the one used in the MODECOM Horizon case. Tempered glass, in turn, allows you to expose the installed graphics card and other expensive components. Nothing can stop this wind The case has three 140 mm ARGB fans installed on the front, which force air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. You get a case ready to use right out of the box, all you need to do is mount the components in it and work on a well-cooled and ventilated computer. Create a storm But that's not all, you can install additional 3 120 mm fans or 2 x 140 mm on the top of the case yourself. There is also the possibility of mounting two 120 mm fans on the motherboard wall. A computer configured in this way will be optimally cooled, ensuring that components operate at low temperatures, while contributing to their longer lifespan. Ready for anything The case is adapted to mount E-ATX boards. The wide possibilities of arranging and expanding the computer will work well in both gaming computers and professional solutions. The unlimited freedom of computer configuration allows for the installation of modern components with the possibility of further expansion. Games and programs will find their place here The MODECOM Horizon case has space for 4 hard drives. Two 2.5 SSD drives will find their place on the motherboard tray. Placed in a convenient place for connection, they will work great as media for games and programs. The disk basket in the power supply tunnel allows for the installation of two 3.5 HDD drives or a configuration of 1 x 2.5 SSD and 1 x 3.5 HDD. You can also simply put on 2.5 SSD drives and mount two such drives in the power supply tunnel. If you add space for M.2 drives on the motherboard, the MODECOM Horizon computer will become a real storage for games and documents.
ATX case with 270° glass panel, up to ten fans possible, GPUs up to 420 mm / CPU up to 165 mm height, up to three drives possible, radiator up to 360 mm, 1x USB-C / 2x USB-A
Tootekood: P30 AIR WhiteGTIN: 8809213764059Korpused
Zalman P30 Air micro-ATX case with tempered glass and mesh front - white The Zalman P30 Air micro-ATX case in elegant white combines excellent cooling performance with a modern design. The mesh front ensures maximum air circulation, while the tempered glass side panel allows a clear view of the hardware inside. Perfect for PC enthusiasts who prefer a stylish and functional setup. Key features of the Zalman P30 Air case in white: Tempered Glass Side Panel : Presents the components in an attractive manner and gives the setup a high-quality look. Air-permeable mesh front : Optimizes cooling and ensures a constant air supply to the most important components. Compact micro-ATX design : Suitable for micro-ATX and mini-ITX motherboards, making it ideal for space-saving, high-performance builds. Modern white finish : Makes a stylish statement and goes great with minimalist or bright setups. The Zalman P30 Air case in white is the optimal choice for anyone who wants to build a powerful and well-cooled PC system in a compact, aesthetic case. The combination of mesh front and panoramic view through the tempered glass makes it the perfect choice for creative and performance-oriented builds.
Das AeroCool D301A Mini-Tower-Gehäuse kombiniert ein trendiges Mesh-Design mit Holzakzenten an der Front mit einer robusten SPCC-Konstruktion für Langlebigkeit. Es unterstützt ASUS- und MSI-m-ATX-Motherboards mit rückwärts gerichteten Anschlüssen, Flüssigkeitskühler bis zu 360 mm und GPUs bis zu 410 mm und bietet so ein leistungsstarkes PC-Baupotenzial in kompakter Form. Mit 11 Lüftersteckplätzen für optimale Kühlung, vielseitigen Speicheroptionen und praktischen E/A-Anschlüssen, einschließlich USB Typ C und USB3.0, ist dieses Gehäuse auf Leistung und Benutzerfreundlichkeit ausgelegt.