Midi Tower Fornax 4000 ARGB case white Professional gaming computer case Easy access - half glass side panel with window Specially designed front panel - "Magic" dust filter. Additional SSD toolless screws with rubber washer Bottom mounting of the power supply
Spacious Micro-ATX case in white, for motherboards up to Micro-ATX, side panel made of Tempered Glass, up to 11x 120-mm fans possible, 2x radiators up to 360 mm possible, graphics cards up to 400 mm in length, dual-chamber design.
CTE T500 TG ARGB Snow Full Tower Chassis The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support up to a 420mm AIO radiator at the front and a maximum 360mm AIO radiator at the rear. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for centralized thermal efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE T500 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE T500 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. Experience the perfect combination of design and performance with our CTE T500 The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support a maximum of a 420mm AIO radiator at the front and a maximum of two 360mm AIO radiators at the front and rear. There's plenty of room to install cooling components, including front and rear fan brackets, top and right fan vents, bottom fan vent, and shroud vent, and the case can accommodate up to eleven 140mm/120mm fans. Other cool details include removable filters, pump and tank support, and Velcro straps for easy cable management. Our CTE T500 Snow is the perfect choice whether you're looking for a custom liquid cooling setup or a dual AIO setup! Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE T500 TG ARGB's versatile interior features two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Support for dual 360mm radiators Our CTE T500 TG ARGB Snow offers excellent cooling support for custom liquid cooling enthusiasts, allowing users to install up to two 360mm radiators simultaneously at the front and rear. To ensure AIO compatibility, users can install up to one 420mm AIO radiator on the front and up to two 360mm AIO radiator on the front and rear. All your dream cooling components will fit! The CTE T500 Full Tower case has a huge fan and cooler installation capacity: up to eleven 140 mm/120 mm fans and 360 mm AIO coolers in various locations (420 mm AIO cooler at the front). Moreover, equipped front and rear fan brackets and mounting locations on the top, right side and lid ensure easy installation of all desired cooling components. Rock your world with three pre-installed white 140mm CT140 ARGB fans The CTE T500 TG ARGB Snow Full Tower case is equipped with three white 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance. We've tested everything, so you don't have to At Thermaltake, we always stress test our products under harsh conditions to ensure product quality. CTE T500 TG ARGB Snow Full Tower Chassis products have been tested at 100% full load for 30 minutes, with the highest-end CPU, GPU and motherboard at the time of testing, compared to a consumer-style configuration, which allowed us to test how the chassis handles in real-world situations.
Volcano Expanse S Apex ARGB Midi Black case Excellent airflow. Roomy design. 4 ARGB fans included. Convenience of installation and expansion. Here it is - the source of gaming - the Volcano Expanse Apex ARGB Midi computer case. Because what would a real gaming computer be without a housing in which all the components can be mounted with the utmost convenience and precision? Moreover, without any of the frills found in new housings, you will find a classic in a modern version. There are plenty of practical solutions for powerful gaming computers - an easily removable front filter and one under the power supply, it is possible to install a frame for three additional fans instead of a cable organizer, plenty of space for gaming components and great air circulation. When looking for the best solutions, it is good to go back to the source. Interior design The Volcano Expanse Apex ARGB MIDI case allows you to arrange the interior in such a way that the computer is truly yours! At the height of the motherboard, there is a dedicated space for mounting a cable tray or fan frame. It's up to you to decide how to use the possibilities of arranging the interior of your computer. The tray allows you to organize the cables and keep the inside of the case tidy. This will be appreciated by people who focus primarily on aesthetics and need to keep their computer in good order. And if you are building a real gaming monster and need the best possible cooling of your components, instead of the tray you can install a frame for three additional 120 mm fans. Turn your computer into a refrigerator By unscrewing the metal element designed to organize cables, you can install a dedicated frame for fans and cool the computer even better. On the gaming chessboard The Volcano Expanse S APEX ARGB MIDI case is designed with square-shaped panels. Hence the letter S in the name of the housing, which comes from the word square. It differs little from its twin design, Volcano Expanse T ARGB Midi. We give you a free choice of panel designs, choose what you simply like. Easy! Keeping your computer clean is very important. To minimize dust entering the interior, an easily removable dust filter is located at the front between the front panel and the housing. All you need to do is simply remove the front panel (you don't have to dismantle the entire front) and dismantle the filter to clean it quickly and conveniently. The use of practical solutions will be appreciated by anyone who systematically cares about the cleanliness, durability and functionality of their computer. Cleaning the front panel is easy! Lots of fans Keeping components running cool is paramount. Thanks to this, they work more efficiently and their service life increases. Factory-installed ARGB fans (3 x 140 mm at the front and 1 x 140 mm at the back) ensure good air flow, effectively cooling the graphics card and processor. However, if you want to have even greater configuration options, you can install three additional 120 mm or 2 x 140 mm fans on the top panel. Moreover, there is space on the motherboard mounting wall for three 120 mm fans after installing a special frame instead of the cable tray. In total, you can have up to 10 fans here! Water cooling The housing is suitable for water cooling installation. At the top of the case there is space for a radiator up to 360 mm. The same size cooler will also fit in place of the factory-installed fans on the front of the case. The same cooler (360 mm) can also be mounted on a dedicated frame of the motherboard wall, but its thickness cannot be greater than 52 mm. At the back, there is space for 120/140 mm water cooling. The introduced solutions are aimed at creating a real gaming machine for every game. And all this in a solid, airy construction. Without screws The times when you had to unscrew panels are long gone. In the Volcano Expanse case, we offer pleasant and simple solutions so that you can build your dream computer with a smile. All panels are mounted with snaps - you don't need any tools to remove the panel and conveniently install the components. Need to add RAM sticks? Blow out the dust from the interior? You can remove the panels with a smooth movement of your hand without having to unscrew them. Controller The case is equipped with an ARGB fan controller. Thanks to this, you can manage their speed and backlight. A total of 9 fans can be connected. At your fingertips The panel with USB/Audio inputs is placed at the top of the case, giving you convenient access to the connectors when the case is placed under the desk. There are 2 USB 3.0 connectors and one USB-C connector on the panel. Classically, there is also a microphone and headphone input, as well as a power button and fan control. Dust filter There is a dust filter under the power supply. You can easily remove and install the filter, which will keep your computer clean while increasing the efficiency and safety of the power supply and other installed components. It was designed for ease of assembly and disassembly, which is facilitated by structural elements equipped with magnets. Access to the filter is possible both from the front and back of the housing. Dust filters are also installed on the top and side panels. A place for your favorite games There will be plenty of space for your favorite games. The housing allows the installation of two 2.5 drives on the motherboard tray. Additionally, you can install two 3.5 in the power supply tunnel. With this amount of disk space, you can easily plan to install new games. Removable caps and vertical GPU mounting All PCI/PCIe expansion card caps are removable. Players will also appreciate the possibility of vertically mounting the graphics card, because the metal frame in which the caps are placed can be unscrewed.
Mini-ITX and M-ATX case in black, for motherboards in Mini-ITX or M-ATX format, eight different installation options, external IO hub, mesh grille for improved air intake, up to seven 120mm fans, and two simultaneous 360mm radiators.
Elegant black midi-tower, discreet design made of aluminum and steel, tempered glass side panel, for E-ATX motherboards (max. 305 x 285 mm), space for a maximum 360mm radiator in the top, graphics cards up to 330 mm, 4x 2.5-inch or 2x 2.5/3.5-inch data carriers.
Mini-ITX case as well as M-ATX case in white, for motherboards in Mini-ITX or M-ATX format, eight different installation possibilities, external IO hub, mesh grille for improved airflow, up to seven 120 mm fans, and two simultaneous 360 mm radiators.
Compact dual-chamber midi-tower, developed by Lian Li and PCMR, three sides with seamless tempered glass, alternative case cover for better cooling, supports 3x 360-mm radiators simultaneously, up to 11x 120-mm fans, 1x USB-C 3.1 and 2x USB-A 3.0 on the front panel
Showcase your hardware perfectly with the Phanteks Evolv S2 PC case. The spacious panoramic design with glass front and sides always gives you a clear view of your components—ideal for eye-catching builds with RGB lighting and custom water cooling. Black midi-tower with panoramic design Efficient cooling options with up to seven fans and radiator support up to 360 mm Supports motherboards up to E-ATX size with back-connect design Space for graphics cards up to 395 mm and CPU coolers up to 175 mm in height Clean look thanks to hidden cabling Four integrated RGB fans Phanteks Evolv S2: Midi-tower with panoramic design The Phanteks Evolv S2 midi-tower offers the perfect balance between size and functionality. With ample space for powerful hardware and efficient cooling, it’s the ideal choice for gaming and workstation builds. Optimal cooling with fans and radiators To keep your hardware cool under any load, the Phanteks Evolv S2 can accommodate up to seven fans. The top and bottom each support the installation of three 120 mm fans, while the rear can hold a 120 mm fan. To get you started, four 120 mm fans are already pre-installed—three at the bottom and one at the rear. If you prefer water cooling—whether AiO or custom—you can also install a radiator. The top supports a radiator up to 360 mm in size. Installing your hardware The case supports the installation of graphics cards up to 395 mm in length. Motherboards up to E-ATX format are supported. The new back-connect design motherboards are also compatible, allowing for clean cable management and an upgraded setup. The CPU cooler should not exceed 175 mm in height. Up to four drives can be installed to store your programs and games.
Der Aerocool D501A bietet dir genug Platz für deine High-End-Komponenten. Dabei wird deine Gaming-Hardware durch die umfangreichen Kühloptionen effektiv gekühlt. Zudem ermöglicht das Tempered Glass an der Seite einen großzügigen Einblick in das Innenleben deines Gehäuses. Eine Holzverschönerung an der Front rundet das Gesamtbild ab. Leistungsstarke Hardware benötigt eine ebenso leistungsstarke Kühlung, die eine Überhitzung verhindert. Im Aerocool D501A lassen sich dementsprechend bis zu 11 Lüfter einbauen. Die Vorderseite unterstützt den Einbau von drei 120 oder 140 mm großen Lüftern, während am Deckel drei 120-mm- oder zwei 140-mm-Lüfter möglich sind. An der Seite, sowie auf der Netzteil-Abdeckung kannst du zwei weitere Lüfter der Größe 120 mm einbauen. Zusätzlich lässt sich an der Hinterseite ein weiterer 120-mm-Lüfter montieren. Die vier verbauten ARGB-Lüfter lassen sich ganz nach deinen Wünschen anpassen und sorgen für einen guten Luftfluss im Gehäuse. Der Midi-Tower unterstützt den Einbau von Grafikkarten bis zu einer Größe von 400 mm. Damit sind demzufolge auch die aktuellen NVIDIA GPUs der 50er-Generation möglich. Mainboards sind bis zum ATX-Format realisierbar. Der CPU-Kühler sollte eine Höhe von 171 mm nicht überschreiten. Beim Netzteil dagegen sind dir kaum Grenzen gesetzt, denn dieses darf bis zu 220 mm lang sein.
Darkflash DB460M computer case (black)Darkflash DB460M is a reliable computer case designed for all gamers looking for a combination of functionality and aesthetics. It offers a spacious interior for convenient installation of graphics cards up to 420 mm in length, a tempered glass side panel, a full mesh front panel and excellent cooling options (up to 12 fans and a 360 mm radiator can be installed). The chassis looks sleek, and is compatible with M-ATX and ITX motherboards and equipped with USB 3.0 ports for fast data transfer.Minimalist designThe DB460M chassis features a tempered glass clamshell side panel - which opens without tools, greatly speeding up access to components and simplifying computer upgrades. The mesh front panel emphasizes the gaming character of the case, and what's more, it provides maximum airflow, supporting efficient cooling even during intensive work. As a result, you are assured that the inside of your PC is further protected.Designed with expansion in mindThe interior of the DB460M has been laid out to allow convenient installation and replacement of components when the need arises. The case supports M-ATX and ITX format motherboards, and its spacious design allows for graphics cards up to 420 mm in length and CPU coolers up to 174 mm in height. There are also 4 standard PCle slots at your disposal, optimized for 5 slots,which ensure compatibility with high-performance GPUs.Exceptional cooling performanceThe Darkflash DB460M allows you to install up to 12 120mm fans or 4 140mm fans, which translates into excellent heat dissipation from inside your PC. The case also supports the installation of water cooling - it is possible to mount a heatsink up to 360 mm in length, making it an ideal choice for systems requiring high thermal performance.Connectors and full functionalityOn the front of the case you will find USB 3.0 ports and two USB 2.0 connectors for fast data transfer and convenient connection of peripheral devices. As a result, the DB460M will prove itself both as a base for a gaming kit and a high-performance workstation.High build quality and aestheticsDarkflash DB460M is a combination of exceptional design, careful workmanship and high-quality materials. The case's clean lines, thoughtful cable layout and modernistic design make it a practical as well as stylish centerpiece of any computer workstation. The components of your equipment have never looked so good before! ManufacturerDarkflashModelDB460MHousing typeBig TowerSide panelTempered glassMotherboard standardM-ATX, ITXPower supply standardATX at the bottomSlots for internal drives3.5'HDD x2, 2.5'SSD x2Expansion card slots4Max PSU length240 mmMax length of graphics card420 mmMax height of CPU cooler174 mmMax number of fans12Fan mounting optionsRear: 120 mm x1; Top: 120 mm x3/140 mm x2; Bottom: 120 mm x3; Front: 120 mm x3/140 mm x2Water cooling mounting optionsTop 360/280/240 mm; Rear 120 mmNumber of fans installedNo fans installedType of fansNo fans installedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x2, HD AUDIOMaterial0.5 mm SPCCColorBlackHeight410 mmWidth220 mmDepth470 mm
With the D32 series, Jonsbo targets everyone who wants to build their PC in a space-saving way. Compared to the D32 PRO, the D32 STD PC case addresses the midrange and budget segment with key features such as back-connect support and minimal front I/O.Elegant and space-saving design for mATX motherboardsSeamless cable management with cutouts for back-connect motherboardsTempered glass side panel provides a subtle appearanceAmple space for cooling solutions allows the installation of high-performance hardwareDust filter protects your hardware from annoying dust particlesThe Jonsbo D32 STD White: Space-saving and subtle case for a wide range of hardwareWhether a midrange HTPC or a high-end PC, builds of all kinds comfortably fit into the D32 STD White from Jonsbo. This minimalistic case accommodates graphics cards up to 365 mm long and CPU coolers up to 164 mm high.Thus, even with the compact design of the case, adequate cooling of your hardware is ensured. In combination with up to six 120 mm fans, or one 120 mm fan and four 140 mm fans, the fans also provide enormous airflow inside the case.No cable clutter with back-connectWith back-connect motherboards such as ASUS's BTF series, MSI's PROJECT ZERO series, or GIGABYTE's Stealth series, the case is virtually free of visible cable clutter despite having the same footprint.Because most power and connection cables can be connected at the rear of the motherboard, you save time on cable management while still enjoying a clean look inside your case. Combined with the tempered glass side window, the view of your hardware is especially appealing.Powerful cooling in a small spaceTo ensure your high-performance hardware is sufficiently cooled even in the compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for sufficient airflow, a large dual-tower CPU cooler, or even an installable 240 mm AIO, your hardware will always remain cool, even under load.The dust filter on the bottom and mesh side panel design ensure your hardware stays free of dust and dirt. This keeps your temperatures optimal at all times and helps increase the lifespan of your hardware.
Tootekood: DY460 BLACK + 4 FANSGTIN: 4711527006142Korpused
Darkflash DY460 computer case (Black) + 4 fansThe Darkflash DY460 case will allow you to build not only a powerful, but also a great-looking computer. It combines tempered glass panels with a vertical dual-chamber layout, so you can install many different components in it and display them in an interesting way. The model allows rear mounting of selected motherboards, provides space for heatsinks up to 360 mm, and has a built-in USB-C 3.2 Gen 2 port. The compact dimensions (452 x 238 x 541 mm) hide a spacious compartment that can accommodate a graphics card up to 400 mm long and CPU cooling up to 185 mm high. In addition, you'll find four ARGB fans included.Unprecedented cooling performanceThe case allows the installation of up to 10 120 mm fans, providing excellent airflow for the most demanding components. It is also possible to install a 360 mm heatsink on the top or 120/240 mm on the rear. Also noteworthy are the numerous ventilation holes. All this means that you can play AAA games or use demanding software without worry - your computer will not overheat. The kit includes four ARGB fans.Wide expansion possibilitiesBuild a computer perfectly suited to your needs. The Darkflash DY460 case allows you to install a graphics card up to 400 mm horizontally or up to 385 mm vertically (using optional mounting accessories, which are not included). You can also accommodate one SSD and two HDDs. In addition, back-connect mounting of ATX and M-ATX motherboards is possible, which simplifies cable management and improves the aesthetics of the entire setup.Useful portsThe built-in USB-C 3.2 Gen 2 port with up to 10 Gbit/s enables lightning-fast data transfers - useful for graphic designers, video editors, photographers and more. In addition, you'll find USB-A 3.0 and HD Audio connectors on the case, as well as Power and Reset buttons. This makes using the computer convenient and hassle-free!Delightful designTempered glass on three sides of the case provides a 330° panoramic view of the computer's interior, perfectly displaying selected components - such as those with RGB backlighting. Such a solution makes each configuration a real desktop ornament. What's more, the case was created from durable 0.8 mm thick SPCC steel and is effectively protected against dust - it will serve you well for many years.IncludedComputer caseFan x4 ManufacturerDarkflashModelDY460Housing typeBig TowerSide panelTempered glassMotherboard standardATX, M-ATX, ITXPower supply standardATX at the bottomSlots for internal drives3.5" HDD x2, 2.5" SSD x1Expansion card slots7Max graphics card lengthHorizontal mounting: 400 m; Vertical mounting: 385 mm;Max CPU cooling height185 mmMax number of fans10Fan mounting optionsSide: 120 mm x3; Rear: 120 mm x1; Top: 120 mm x3; Bottom: 120 mm x3;Water cooling mounting optionsTop: 360 mm; Rear: 120 mm / 140 mm;Number of fans installed4Type of fansARGBButtons and controlsPower, ResetConnectorsUSB-C 3.2 Gen 2 x1, USB-A 3.0 x1, HD audioMaterial0.8 mm SPCCColorBlackHeight541 mmWidth238 mmDepth452 mm
Tootekood: DS900WD WHITE W/O FAGTIN: 4711527003943Korpused
DarkFlash DS900WD computer case (white)Darkflash DS900WD is an enclosure designed for users who want practical solutions. The tempered glass side panel and wooden front panel provide good visibility of components and give the whole case a distinct look. It allows the installation of motherboards in ATX, M-ATX and ITX formats, giving you great flexibility when building your computer. With its spacious design and multiple mounting options, it provides convenient kit assembly and good air circulation.Various cooling optionsThe DS900WD offers space to install 12 120 mm fans or 2 140 mm fans and water cooling at the top 360 mm or 240 mm, and at the front 240 mm. This allows you to build an effective cooling system for powerful configurations. In addition, the rear panel of the case features a large steel ventilation mesh for effective heat dissipation.Thoughtful layout and ample spaceThe chassis will accommodate a graphics card up to 425 mm in length and CPU cooling up to 170 mm in height. There are 7 PCI-E slots, allowing the kit to be expanded with additional expansion cards. For storage media, space is provided for two HDDs or one SSD and one HDD, so you won't run out of space for games and files.Built-in portsThe Darkflash DS900WD chassis is equipped with a set of the most commonly used ports that make everyday use of the computer easier. On the top panel you'll find one USB 3.0 (Universal Serial Bus 3.0, a high-speed data transfer connector), while 2 additional USB 2.0 ports are ideal for connecting a mouse, keyboard, headphones or other accessories. There is also an HD Audio connector for convenient connection of headphones and microphone.Refined detailsOn the right side of the case is a metal mesh, which not only provides adequate ventilation, but also blocks larger dust particles from entering the case. What's more, the top and bottom mesh panels also protect your equipment from debris, and their magnetic design makes them easy to install and remove.Durable construction and stylish designThe body of the case is made of 0.5 mm SPCC steel, which ensures high durability. The whole unit measures 470 x 218 x 454 mm and fits into standard under-desk spaces. The stylish design and the ability to illuminate the fans make the set look modern. ManufacturerDarkflashModelDS900WD ATXHousing typeMidi TowerSide panelTempered glassMotherboard standardATX / M-ATX / ITXPower supply standardBottom side, ATXSlots for internal drives3.5" HDD x2 / 2.5" SSD x2Expansion card slots7Max graphics card lengthHorizontal mounting: 425 mmMax CPU cooling height170 mmMax number of fans12Fan mounting optionsRear: 1x 120 mm; Top: 3x 120 mm / 2x 140 mm; Side: 2x 120 mm; Bottom: 3x 120 mm; Front: x3 120 mmWater cooling mounting optionsTop: 360 mm / 240 mm; Front: 240 mmNumber of fans installedNo fans installedType of fansnoneButtons and controlsPower, ResetConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorWhiteHeight454 mmWidth218 mmDepth470 mm
Darkflash C275P fanless computer case (Black)The Darkflash C275P is a compact M-ATX (Micro Advanced Technology eXtended, a motherboard format smaller than standard ATX) case in a modern style that offers a 270° panoramic view of your PC components through tempered glass, quick access to the interior, and great cable organization thanks to a clever layout with seven cable slots. It supports water and air cooling with room for two heatsinks and up to seven fans, and allows for long graphics cards and tall CPU (Central Processing Unit, CPU) coolers. On a day-to-day basis, it provides convenience with a USB 3.0 port (Universal Serial Bus, an interface used for powering and charging electronic devices, as well as for data transfer) and a functional interior with space for drives. It's a solid base for those looking for an aesthetically pleasing and easily expandable case.Compact and functionalThe Darkflash C275P computer case is an option for those who appreciate the combination of modern design and practical solutions. Its compact dimensions of 333 x 275 x 323 mm make it perfect for both the office and the home workstation of a gamer or creator. The side panel made of tempered glass is equipped with a quick release, making access to the inside of the case quick and convenient. The lack of a support column and the 270° panoramic glazing allow to expose all components and give the whole thing a modern, lightweight look.Thoughtful layout for better organizationThe C275P supports M-ATX and ITX (Information Technology eXtended, an ultra-compact motherboard format) motherboards and offers space for graphics cards up to 325 mm in length and CPU coolers up to 155 mm in height. In addition, five PCI (Peripheral Component Interconnect, a communication bus standard used in computers to connect various peripherals to the motherboard) slots allow for easy expansion of the kit. Thanks to an optimized cable management system with seven slots and space for cables above the motherboard, keeping things tidy inside is much easier.Ready for high-performance coolingDespite its compact size, the case is designed for optimal air circulation. It allows the installation of as many as seven 120 mm fans and two 240 mm radiators - on the bottom or side of the case. Such a solution allows efficient heat dissipation, even in more demanding configurations.Functionality for everyday useOn the top panel you will find a USB 3.0 port for fast data transfer and convenient device charging. The case is also equipped with a universal mounting bracket that can accommodate two SSDs (Solid State Drive, solid state drive) and one HDD (Hard Disk Drive, hard drive). The interior is designed for easy installation and expansion so that you can customize the computer to suit your own needs.Includedmotherboard screws x10hard disk drive screws x4power supply screws x6iron columns x2manual ManufacturerDarkFlashModelC275PHousing typeMini TowerSide panelTempered glassMotherboard standardM-ATX, ITXPower supply standardM-ATX, at the bottom or side of the caseSlots for internal drives3 (2 x 2.5", 1 x 3.5")Expansion card slots5Max PSU length240 mmMax length of graphics card325 mmMax height of CPU cooler155 mmMax number of fans7Fan mounting optionsRear: 120 mm x1; Top: 120 mm x2; Side: 120 mm x2; Bottom: 120 mm x2Water cooling mounting optionsSide 240 mm; Bottom 240 mmNumber of fans installedNo fans includedType of fansNo fans includedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x2, HD AudioMaterial0.5 mm SPCCColorBlackHeight333 mmWidth275 mmDepth323 mm
The Jonsplus BO400CG is a premium showcase case for enthusiasts who want to stylishly display their hardware. With a curved glass panel, modular design, and plenty of space for high-end components, it combines design, flexibility, and strong cooling performance. Curved glass showcase impressively highlights your hardware Supports ATX, Micro-ATX, and Mini-ITX motherboards for flexible builds Spacious interior for long GPUs and tall CPU coolers Modular covers allow for customized look and airflow adjustment Extensive fan and radiator options for powerful cooling Panoramic design with curved glass The BO400CG stands out from classic cases with its curved glass panel. The gently curved glass surface creates a continuous panoramic look without sharp edges, so your hardware is perfectly displayed from nearly any angle. Premium materials and clever modularity The sturdy aluminum frame not only gives the case an elegant appearance but also aids in heat dissipation. Tool-less removable side panels and interchangeable covers make assembly and later adjustments easy. Cable management solutions ensure a clean appearance. Plenty of space for high-end hardware and cooling With support for graphics cards up to 435 mm, CPU coolers up to 173 mm, and power supplies up to 200 mm, the BO400CG is suitable for even the most powerful systems. Up to ten 120 mm fans or several large radiators allow for effective air or water cooling, even under heavy load.
DarkFlash AIRNOVA computer case (black) + 3 fansDarkFlash AIRNOVA is a spacious Big Tower case that supports E-ATX, ATX, M-ATX, and ITX motherboards, offering space for graphics cards up to 395 mm in length and CPU coolers up to 175 mm in height. It is equipped with ventilation panels with a large 5x5 mm mesh, 3 120 mm fans, and support for water cooling up to 420 mm. The top panel has all the necessary connectors: two USB 3.0 ports, HD Audio input, Power and Reset buttons, and a fast USB Type-C Gen2 (10 Gbps) connector, which significantly improves data transfer.Effective coolingAIRNOVA has been designed with an emphasis on free airflow. 5x5 mm ventilation grilles are located on six sides of the case, which supports effective heat dissipation. Inside, there is room for three 120 mm fans at the bottom, and a total of up to 10 fans can be installed. The case is also compatible with water cooling – a 420 mm radiator can be installed at the front and a 360 mm radiator at the top.Practical mounting solutionsAIRNOVA offers a modular design with a quick-release system. All panels – including the fan frame, dust cover, and motherboard tray – are removable. This facilitates installation, cleaning, and access to components. In addition, there is 33 mm of space for cable routing at the rear, ensuring an aesthetic and tidy installation.Dust protectionDarkFlash AIRNOVA is equipped with 4 dust filters that effectively protect the interior of the case from contaminants such as dust, hair, and fine pollen. The filters are made of densely woven nylon, which traps up to 98% of contaminants, significantly extending the life of the components and reducing the need for frequent cleaning. Each of the filters – located on the top, bottom, and side panels – is easy to remove thanks to magnetic clips and a slide-out system.Includedcomputer casefan x3 ManufacturerDarkFlashModelAIRNOVACase typeBig TowerMotherboard standardE-ATX, ATX, M-ATX, ITXPower supply standardATX (bottom mounting)Internal drive bays2x SSD, 2x HDD / 1x SSD + 1x HDDExpansion slots7Max power supply length200 mmMax graphics card length395 mmMax CPU cooler height175 mmMax number of fans10Fan mounting optionsFront: 3x 120 mm / 3x 140 mmTop: 3x 120 mm / 2x 140 mmRear: 1x 120 mm / 1x 140 mmBottom: 3x 120 mmWater cooling mounting optionsFront: 360 / 420 mmTop: 360 mmNumber of installed fans3Buttons and controlsPower, ResetConnectors2x USB 3.0, 1x USB Type-C Gen2 (10 Gbps), HD AudioColorBlackHeight538 mmWidth238 mmDepth464 mm
Das FLP02 kombiniert Retro-inspiriertes Design mit klassisch-beigem Finish, modernen Kühlmöglichkeiten und flexiblen Einbauoptionen. Die klassisch gestaltete Front ist mit der von 5,25"-Floppy-Laufwerken inspirierten Abdeckung für Laufwerke, den ikonischen Reset- und Turbo-Tasten und dem als typischer Kippschalter gestalteten Power-Button genau das Richtige für Retro-Fans. Der Turbo-Knopf sorgt dabei für die sofortige Beschleunigung der Lüfter auf volle Drehzahl, was auch über das LED-Feld angezeigt wird. Drei Lüfter sind im Auslieferungszustand bereits enthalten - weitere Kühlmöglichkeiten lassen sich als Lüfter oder als Radiatoren flexibel hinzufügen. Dabei nimmt das FLP02 CPU-Kühler bis zu einer Höhe von 182 Millimetern auf und unterstützt den Einbau von Steckkarten bis zu einer Länge von 386 Millimetern (nach Entfernung des Laufwerkskäfigs in der Front). Außerdem mit dabei: Eine Halterung für lange GPUs und Unterstützung für Mainboards mit Formfaktor SSI-CEB. Das Schlüsselschloss an der Vorderseite trägt zum Retro-Look bei und verhindert unbeabsichtigtes Ein- und Ausschalten oder Zurücksetzen. Die 5,25"-Einschübe an der Front sind kompatibel mit Hot-Swap-Adapterkäfigen, so dass das FLP02 auch für Server-Builds gut geeignet ist.
mATX- ja Mini-ITX-tugi • Sisaldab 4 ventilaatorit, kuni 9 ventilaatori kohta • 4 mm klaaspaneelid, 270° vaade • Hea kaablihaldus, back-connect ühilduv • Mahutab 41,5 cm GPU ja mitu SSD/HDD ketast
As the latest mid-tower case in the Tower Series, the Tower 600 is an ATX case featuring a classic vertical chassis design and an octagonal prism shape, compatible with the latest motherboards with hidden connectors. It supports up to a 420 mm AIO radiator on the right side and a 360 mm AIO radiator on the left side, and offers space for up to thirteen 120 mm fans or nine 140 mm fans. If you want to make the Tower 600 visually more appealing, you can purchase the separately available 3.9" LCD screen kit and chassis stand kit to upgrade the case; the former displays real-time component information and the latter offers a unique look with a special horizontal placement. With its unique design and ample space, the Tower 600 is ready to unleash the full potential of your configuration. The Tower 600 features three 3 mm thick tempered glass panels on the front and two perforated panels on each side. All panels are easily removable without tools. The Tower 600 is equipped with well-designed filters on the top, rear, inner sides, and inner bottom layer to protect your system from dust. It supports a CPU cooler with a maximum height of 210 mm, a GPU with a maximum length of 400 mm (without PSU cover), a power supply up to 220 mm in length, and three 2.5" SSDs or a total of one 3.5" HDD.
