XPG INVADER X. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Placering af strømforsyning: Bund. Understøttede diametre for sideventilatorer: 120 mm, Understøttede diametre for bagerste ventilatorer: 120,140 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 245 mm, Dybde: 475 mm, Højde: 448 mm
XPG BATTLECRUISER II ST. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Frontventiler installeret: 3x 120 mm, Understøttede diametre for frontventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 225 mm, Dybde: 506 mm, Højde: 550 mm. Pakkebredde: 339 mm, Pakkedybde: 643 mm, Pakkehøjde: 615 mm
The IcyDock MB982SP-1S is a 2.5" to 3.5" SAS/SATA converter with improved properties. This product was developed with the same dimensions, connector positions, and mounting holes as a conventional 3.5" HDD, so it can be used in any internal drive bay, as well as in any backplane or hot-swap device designed for 3.5" drives.TypeMounting frameColorsilverEAN4711132868746Manufacturer No.MB982SP-1SIntended useInstallation in a 3.5" drive bay in a PC caseUseDrive frameSuitable for2.5" SATA I / II / III HDD/SSD (7 - 15mm)MaterialMetal (SECC)Installable drives1x 2.5 inch internalRequired drive bays1x 3.5 inch internalFurther informationData transfer: 6 Gbit/sDimensionsWidth: 102 mm x Height: 25 mm x Depth/Length: 147 mmWeight327 grams
Compact midi tower with tempered glass side panel and frontEfficient cooling options with up to six fans and radiators up to 360 mmSupports motherboards up to Micro-ATXSpace for graphics cards up to 395 mm and CPU coolers up to 185 mm highSupports up to three drivesIncludes three 120 mm fans and a 650-watt power supplyThe GSI SmartAssembly ARGB Glass Micro-ATX: Stylish Midi TowerThe GSI SmartAssembly ARGB Glass Micro-ATX is a compact midi tower that gives you extensive options for installing your hardware. The tempered glass side panel and front allow you to view the interior while giving the case an elegant flair.Perfectly cooled with fans, radiators and designUp to six fans can be installed in the tower. You can install three 120 mm fans at the top, while two additional 120 mm fans can be fitted on the side. A 120 mm fan is also supported at the rear. Two 120 mm fans are already installed on the side, as well as one at the rear.If you prefer water cooling—whether an all-in-one water cooler or a custom-built water cooling loop—radiators can be installed in several locations. The top supports a radiator up to 360 mm, the side supports a 240 mm radiator, and the rear supports a 120 mm radiator.Hardware optionsThe midi tower supports the installation of large graphics cards up to 395 mm in length. Motherboards up to the Micro-ATX format can be installed. The CPU cooler should not exceed a height of 185 mm. To store programs and games, up to three drives can be installed—one 3.5-inch hard drive and two 2.5-inch hard drives. The included 650-watt power supply provides your gaming components with sufficient power.
Das Chenbro RM24100-L ist ein robustes und ausbaubares Gehäuse für professionelle und platzsparende Server-Lösungen. Sein benutzerfreundliches Design bietet einfache Installationen. Mit seiner guten Belüftung bleibt es auf lange Zeit zuverlässig.
Das Inter-Tech ODS-716 für Raspberry Pi 4B ist komplett aus Aluminium gefertigt und bietet, zusammen mit den beiden integrierten Wärmeleitern für CPU und RAM ideale Wärmeleitfähigkeiten. Der Boden und Deckel des Gehäuses werden miteinander verschraubt, was zur Stabilität des gesamten Aufbaus beiträgt.
Clear lines, strong cooling, uncompromising look: With the Steel Shark, Sharkoon presents a stylish two-chamber ATX case that combines modern design with a particularly tidy look. Tempered glass on the front and side, four pre-installed ARGB PWM fans as well as extensive cooling options and BTF support make the Steel Shark the ideal basis for powerful and visually impressive gaming systems. Thanks to the well-thought-out two-chamber design, the Steel Shark clearly separates hardware and power supply including cable management. This creates an extra tidy look in the main area, while cables, drives and power supply can be discreetly stored at the back. The front and side panels of the Steel Shark are made of tempered glass and provide a clear view of the built-in hardware and the integrated lighting. This makes the case perfect for users who want to present their system not only powerfully, but also visually impressively. The Steel Shark is equipped with four 120 mm ARGB PWM fans ex works. These not only ensure an effective airflow, but also skillfully showcase the system visually. A practical ARGB control and a PWM fan hub with five positions are included! A total of up to eleven fans can be installed in the Steel Shark. In addition, the housing supports the simultaneous installation of two radiators and is therefore also aimed at water cooling enthusiasts who want to cool their system particularly efficiently and quietly. In addition to classic ATX motherboards, the Steel Shark also supports models with a BTF design. The rear connection technology further optimizes cable management and further underlines the clean look of the system. The Steel Shark is also flexible when it comes to selecting powerful hardware: It supports graphics cards with a length of up to 424 mm, CPU coolers with a height of up to 168 mm and power supplies with a length of up to 244 mm. Tower case type Color black EAN 4044951044924 Made in China Midi tower design Motherboard form factor ATX Tempered glass material Window Kit Yes Internal dimensions Plug-in card length maximum 424 mm Internal dimensions CPU cooler height maximum 168 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 244 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Slots full size 7 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Front 3 x 120 mm ARGB-PWM fans pre-installed Back 1 x 120 mm ARGB-PWM fan pre-installed Notes Cable management system, graphics card holder, top: 3 x 120 mm fans can be installed, alternatively 2 x 140 mm fans can be installed, bottom: 3 x 120 mm fans can be installed Lighting Yes, RGB RGB connectors addressable RGB header RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling possible Yes Water cooling possible Supported radiators Front: 360 mm, Top: 360/280 mm Rear connection of the motherboard Yes Note If the graphics card is longer than 270 mm, there may be conflicts when installing a radiator in the side Accessories available accessory set Volume 59 l Dimensions Width: 28.5 cm x Height: 45.2 cm x Depth/Length: 46 cm
The HYTE Y70 Touch Infinite GUNDAM WING is an exclusive, limited edition premium ATX case co-developed with Bandai Namco to celebrate the 30th anniversary of Mobile Suit Gundam Wing. The unique design combines the iconic aesthetic of Wing Gundam Zero with cutting-edge PC case technology, making each configuration a real eye-catcher in gaming, anime and enthusiast builds. The focus is on the integrated 14.9-inch 2.5K multi-touch display with IPS technology and a 60Hz refresh rate, which can be individually adjusted via HYTE Nexus. Exclusive Gundam Wing animations, high-quality UV prints and thematic design elements give the case a unique collector's edition character. Technically, the special edition is based on the powerful HYTE Y70 Touch Infinite Mid-Tower model with a dual-chamber layout and enormous cooling capacity. The case supports current high-end components, including E-ATX motherboards, vertical 4-socket GPUs up to 422 mm in length, and radiators up to 360 mm in length. The included PCIe 4.0 x16 riser cable ensures a sleek vertical display of the GPU and optimized airflow. With space for up to ten fans, extensive cable management features and a modern design with panoramic glass, the HYTE Y70 Touch Infinite GUNDAM WING is ideal for high-end gaming PCs, show builds and individual creator systems. The combination of performance-oriented design and iconic anime design makes this case a unique highlight for Gundam fans and PC enthusiasts alike.
We designed our Silentware Flow 110 A-RGB to make PC building a breeze, even for beginners, without having to worry about space, airflow or cabling. Our high-quality, modern mesh case comes with 4 pre-installed fans that ensure good airflow and thus provide good cooling for the components. In addition, our front fans are connected via daisy chain, so they can be easily connected to the motherboard – without any annoying adapters, additional controllers or software. They are controlled via the motherboard using 4-pin PWM and 3-pin A-RGB 5V connectors. Type Tower case Colour: black EAN 4262483960059 Manufacturer no. FLOW110BLACK Manufactured in China Series Flow Design Midi tower Mainboard form factor ATX Material Tempered glass, steel Window kit Yes Mesh front Yes Internal dimensions Maximum plug-in card length 380 mm Supported radiators Front: 120/140/240/280/360 mm, top: 120/140/240/280/360 mm, rear: 120/140 mm Drive bays 3.5-inch internal 2 pieces Full-size slots 7 Front connections 2x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s) Front 3 x 120 mm ARGB fans with hydro bearings pre-installed, alternatively 2 x 140 mm fans can be installed Rear 1 x 120 mm ARGB fan with hydro bearings pre-installed, alternatively 1 x 140 mm fan can be installed Notes Lighting can be controlled directly via the motherboard using 3-pin A-RGB, the speed can be regulated via a 4-pin connection using PWM and/or voltage via the motherboard, cover: 3 x 120 mm fans can be installed, alternatively 2 x 140 mm fans can be installed. Lighting Yes, RGB RGB connections Addressable RGB header RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling possible Yes Rear connection of the motherboard No Further information The high-quality real glass side window made of tempered glass allows you to see inside your case so you can always keep an eye on your stylish PC components. To round off the design, we have designed the space for the power supply as a closed chamber. This creates a visually minimalist and discreet system in which great PC systems can be realised. The mesh front panel allows an unobstructed view of the RGB fans. Volume 51 l Dimensions Width: 23 cm x Height: 47.6 cm x Depth/Length: 47 cm
The SilverStone RM43-324-RS Rackmount Case is the perfect candidate for a mass storage solution in 4U rackmount format. With 24 hot-swap trays, you can expand or replace storage at any time - ideal for a flexible server or high-capacity workstation. Everyone has the dream of a powerful server or a powerful workstation. With this rackmount case from SilverStone you come one step closer to fulfillment: The RM43-324-RS offers a total of 24 hot-swap trays for HDDs and SSDs, a powerful cooling system, space for up to three 2-slot GPUs and large server and workstation motherboards. So that you never lose track of the 24 hard drives that can be installed, each individual tray is equipped with a status LED. This way you can immediately see whether one or more hard drives are refusing to work. There are also separate status LEDs for the network connection and the power status. A conventional mainboard is usually not sufficient for a workstation or server. This case therefore offers enough space for SSI-EEB, SSI-CEB and E-ATX mainboards. This allows you to integrate more RAM and additional storage media and exploit the full performance potential of your hardware. To ensure that your powerful hardware is adequately cooled, this case contains three industrial 120 mm fans with a thickness of a whopping 38 millimeters. Since these are also hot-swappable, you can replace them directly in the event of a defect. Rack type, server enclosure Color black/red EAN 4710679818566 Manufacturer no. SST-RM43-324-RS Made in China Rack design Mainboard form factor ATX, E-ATX, µATX, Mini-ITX, SSI-CEB, SSI-EEB Material aluminum, plastic, SPCC (steel): 1.0mm ~ 1.2mm Internal dimensions plug-in card length CPU cooler height Power supply form factor Height units 3.5 inch drive bays 2.5 inches Slots full size Front ports 2x USB-A 3.2 Gen 1 (5 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. Rear 2 x 80mm fans pre-installed Notes Cable management, Internal: 3 x 120 x 38 mm hot-swappable PWM ball bearing fan pre-installed, Max supported weight: 80 kg Rear connection of the mainboard No Feature Supports 24 x 2.5"/3.5" SAS/SATA hard drives/SSD, hot swappable Further information Backplane: 24-port SAS / SATA to Mini SAS HD-SFF-8643 x 6 + SGPIO, Interface: SAS III / II / I, SATA III / II / I Volume 51 l Dimensions Width: 44.2 cm x Height: 17.5 cm x Depth/Length: 66 cm Weight 16.8kg