The TR300 WS Mid-Tower Case is an ATX chassis with a front-mounted power supply for optimal space utilization, and supports AIO liquid coolers up to 360 mm for maximum cooling performance. It accommodates up to eight 120 mm fans and supports a radiator up to 360 mm on the top, offering flexible cooling solutions. The case supports Mini-ITX, Micro-ATX, and ATX motherboards; the power supply can be installed at four mounting points within the case, depending on the motherboard size. Maximize the visual effects of your TR300 WS Mid-Tower Case with an upgrade to our LCD screen kit. The 6-inch LCD display allows real-time monitoring and the upload of custom images or GIFs, adding extra flair with the latest TT RGB Plus software. Removable dust filters help keep your system clean while maintaining optimal airflow. For maximum storage compatibility, the case supports up to two 3.5-inch HDDs and three 2.5-inch SSDs for flexible installation.
The NZXT H6 RGB+ (2026) in the elegant all-black version combines modern design, powerful cooling and impressive RGB lighting in a case that was specially developed for demanding gamers and PC enthusiasts. The striking panoramic glass front with seamless corner glazing offers an impressive view of the installed hardware and makes every system a visual highlight on the desk. Thanks to the innovative dual-chamber layout, the power supply, drives and cables are neatly separated from the main system. This not only ensures a tidy look, but also improves the airflow within the case. The angled front fans direct fresh air specifically to the most important components and ensure efficient cooling of the processor and graphics card, even under high load. The H6 RGB+ is equipped with powerful RGB fans ex works, which ensure an optimal balance of cooling performance and impressive lighting effects. The integrated RGB control enables easy synchronization of the lighting and creates individual color accents that perfectly match your own setup. Generous mesh areas and support for numerous additional fans and large water cooling radiators offer maximum flexibility for powerful gaming and high-end systems. With support for ATX, Micro-ATX and Mini-ITX motherboards as well as enough space for modern high-end graphics cards and powerful CPU coolers, the case is ideal for current and future hardware generations. Thoughtful details such as side panels that can be removed without tools, an integrated cable management system and a GPU support make assembly easier and ensure a professional appearance. Tower case type Color black EAN 5056547209357 Manufacturer no. CC-H62FB-P1 H6 series Midi tower design Motherboard form factor ATX Material steel, tempered glass Window Kit Yes Mesh front Yes Internal dimensions plug-in card length maximum 390 mm Internal dimensions CPU cooler height maximum 165 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 200 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Slots full size 7 pieces Slots Slots Tool-free Yes Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Rear 1 x F120mm RGB fan pre-installed Notes Cable management: 90 mm, Nylon dust filter: Bottom, Front Right: 1 x F360 mm RGB reverse fan pre-installed, Top: 3 x 120 mm fans can be installed, 2 x 140 mm fans can be installed, Bottom: 1 x F360 mm RGB reverse fan pre-installed Lighting Yes, RGB Water cooling possible Yes Water cooling possible Supported radiators Top: 360 mm (up to 400 mm), back: 120 mm Rear connection of the motherboard Yes Further information The H6 RGB+ comes with pre-installed RGB fans and Control Hub Lite. Accessories included User manual, mounting accessories, Control Hub Lite, 2 x F360 RGB reverse fans, 1 x F120 RGB fan Volume 55 l Dimensions Width: 29.2 cm x Height: 44.8 cm x Depth/Length: 42 cm Weight 9.3kg
The FSP U660 is a powerful server and workstation case for professional systems with high storage and performance requirements. It was developed specifically for users who want to combine extensive storage capacity, powerful hardware and flexible configuration options in one housing. With space for up to 18 3.5-inch hard drives and additional mounting options for 2.5-inch SSDs, the U660 is ideal for storage servers, backup systems, high-performance workstations and data-intensive applications. The generously sized housing supports motherboards in EEB, E-ATX, ATX, Micro-ATX and Mini-ITX formats and thus offers a high level of flexibility when selecting components. Up to 420 mm of space is available for powerful graphics cards, while CPU coolers can reach a maximum height of 180 mm. With nine expansion slots and the option of vertically mounting a graphics card, the system can be individually adapted to different requirements. The FSP U660 also offers extensive cooling options. In addition to numerous positions for case fans, the case supports radiators up to 360 mm in size. This makes it also suitable for powerful processors and systems that operate under high continuous load. The well-thought-out interior design supports efficient airflow and makes it easier to build powerful hardware. The U660 combines its high storage capacity with a robust construction made of 0.8 mm thick SPCC steel. With dimensions of 450 × 258 × 568 mm and a weight of around 11.6 kg, the case offers enough space for extensive hardware configurations, but remains comparatively compact for a case of this configuration. Two USB 3.0 ports and one USB Type-C port are available on the front for modern peripheral devices. The U660 combines its high storage capacity with a robust construction made of 0.8 mm thick SPCC steel. With dimensions of 450 × 258 × 568 mm and a weight of around 11.6 kg, the case offers enough space for extensive hardware configurations, but remains comparatively compact for a case of this configuration. Two USB 3.0 ports and one USB Type-C port are available on the front for modern peripheral devices. Whether as a powerful storage server, backup system, media workstation or basis for sophisticated AI and rendering applications - the FSP U660 offers a versatile basis for professional systems. Big tower case type Color black EAN 4711498482594 Manufacturer no. POC0000310 Server tower design Mainboard form factor E-ATX, SSI-CEB, SSI-EEB Material 0.8mm SPCC Internal dimensions plug-in card length maximum 420 mm Internal dimensions CPU cooler height maximum 180 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 230 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Drive bays 2.5 in 3.5 inches internal Slots full size 9 pieces Front ports 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. Front 4 x 120 mm fans can be installed, alternatively 3 x 140 mm fans can be installed Rear 1 x 120 mm fan can be installed, alternatively 1 x 140 mm fan can be installed Notes Vertical mounting of a graphics card possible, side: 4 x 120 mm fans can be installed, alternatively 3 x 140 mm fans can be installed, bottom: 3 x 120 mm fans can be installed, 3 x 120 mm fans can be installed, alternatively 3 x 140 mm fans can be installed Water cooling possible. Supported radiators top: 360 mm Rear connection of the mainboard No Volume 66 l Dimensions Width: 25.8 cm x Height: 56.8 cm x Depth/Length: 45 cm Weight 11.6kg
The SilverStone RM4A 4U Rackmount Chassis sets new standards in flexibility for workstation and server configurations, offering support for everything from compact Mini-ITX boards to full-size SSI-EEB motherboards. With eight full-height expansion slots and a removable expansion card bracket, it's built to easily accommodate high-performance components - no sagging, no strain, just solid support for multi-GPU setups or demanding expansion needs. Excellent temperature control is the strength of the RM4A. The front panel offers space for a 360 mm radiator, enabling the use of highly efficient liquid cooling systems for CPUs or GPUs. Complemented by two 80 mm fans on the back, the case offers a consistent airflow to all important components, ensuring reliable cooling even under continuous load. Rack type, server enclosure Color black EAN 4710679819501 Manufacturer no. SST-RM4A Made in China Rack design Mainboard form factor ATX, E-ATX, µATX, Mini-ITX, SSI-CEB, SSI-EEB Material steel Internal dimensions Plug-in card length maximum 424 mm Internal dimensions CPU cooler height maximum 148 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 255 mm Internal dimensions height units 4 U Drive bays 3.5 inches internal Drive bays 2.5 inches internal Drive bays 2.5 in 3.5 inches internal Slots full size 8 pieces Front ports 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 2.0 (480 Mbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. Front 3 x 120 mm fans can be installed, or a 360 mm radiator 2 x 80 mm fans can be installed on the back Water cooling possible Yes Water cooling possible. Supported radiators front: 360 mm Rear connection of the mainboard No Volume 35 l Dimensions Width: 44 cm x Height: 17.6 cm x Depth/Length: 44.6 cm Weight 7.6kg
Our Silentware View A-RGB combines modern glass optics with ample space for high-end systems and impressive airflow, ensuring that your hardware is kept cool at all times. To achieve this, we have pre-installed three 120 mm reverse airflow fans and a conventional 120 mm case fan with A-RGB lighting and high-quality HDB bearings. The air intake on the front right of the Silentware View is slightly angled to direct the flow of fresh air to the graphics card and CPU cooler as quickly as possible, despite the glass front panel. The newly developed case body naturally has all the necessary cable grommets for systems based on ASUS BTF, MSI Project Zero and similar hardware, making it particularly future-proof. For systems with conventional cable routing, there are (partly rubberised) cable grommets for the motherboard, GPU, CPU and fan power supply, as well as ample space for cable management. With space for graphics cards up to 410 millimetres long and CPU coolers up to 160 millimetres high, the case is perfect for high-end hardware. Stylish showcase systems are therefore particularly easy to implement with the Silentware View. Ambitious buyers, on the other hand, have the option of implementing complex custom loop water cooling systems with up to 2x 360mm, 1x 280mm and 1x 120mm radiators. Type Tower case Colour: black EAN 4262483960127 Manufacturer no. VIEWBLACK Manufactured in China Series View Design Midi tower Mainboard form factor ATX Material Tempered glass, steel Window kit Yes Internal dimensions Maximum plug-in card length 410 mm Supported radiators Side: 120/240/280 mm, Top: 120/240/280/360 mm, Bottom: 120/240/280/360 mm, Rear: 120 mm Drive bays 3.5-inch internal 1 piece Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 1 (5 Gbit/s) Rear 1 x 120 mm ARGB fan with hydro bearing pre-installed Notes Side: 3 x 120 mm ARGB fans with hydro bearings pre-installed, Top: 3 x 120 mm fans can be installed, Bottom: 3 x 120 mm fans can be installed Lighting Yes, RGB RGB connections Addressable RGB header RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling possible Yes Rear connection of the motherboard Yes Feature lighting can be controlled directly via the motherboard using a 3-pin A-RGB connector, while the speed can be regulated via a 4-pin connector using PWM and/or DC via the motherboard Further information The high-quality real glass front panel and side window made of tempered glass allow you to see inside your case so you can keep an eye on your stylish PC components at all times. The power supply chamber is located behind the motherboard tray. This is also where 2.5-inch SSDs and hard drives are installed. The visual focus of the build is therefore on the graphics card, motherboard and cooling. Volume 50 l Dimensions Width: 28.5 cm x Height: 41.5 cm x Depth/Length: 42.5 cm
Internal 4x 2.5 ", 3x 3.5" (cross, hard drive cage), Front I / O 2x USB-A 3.0, 1x headphone / microphone, PCI slots 4, Fan (front) 1x 120mm or 3x 120mm (optional) or 2x 140mm (optional), Fan (rear) 1x 120mm, Fan (top) 2x 140mm (optional), Radiator sizes 120/140/240 / 280mm front, 120 / 240mm top, 120mm rear, Mainboard to μATX, Supported Motherboards Mini-ITX (6.7 "x6.7") / μATX (9.6 "x9.6"), Power supply ATX (max 325mm deep without front radiator and without HDD cage), Power supply position below, CPU cooler up to max. 166mm height Graphic cards up to max. 346mm, Color black, inside black, Dimensions (WxHxD) 210x411x411mm, volume 35.47l, weight 5.72kg, Special features Cable management, dust filter, glass viewing window, MCB-NR400-KGNN-S00
Internal 2x 2.5 "/3.5" (transverse, hard disk cage), 2x 2.5 ", Front I / O 1x USB-A 3.0, 2x USB-A 2.0, 1x microphone, 1x headphone, PCI slots 4, Fan (front) 2x 140mm (optional), Fan (rear) 1x 120mm, 1000rpm, 16dB (A), Fan (top) 1x 200mm (optional) or 2x 140mm (optional), Radiator sizes 120/140/240 / 280mm at the front, 120/140/240 / 280mm at the top, 120mm at the back, Mainboard up to µATX, Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6"), Power supply ATX (max.160mm deep), PSU position below, CPU cooler max. 165mm height, Graphics cards max. 330mm, Color black, inside black, Lighting integrated LED control, integrated RGB LED lighting, Dimensions (WxHxD) 220x411x441mm, Volume 39.88l, Weight 6.10kg, Housing type mini tower, Special features dust filter, viewing window made of glass, CA-1Q9-00S1WN-00
Tootekood: SAVIO Prime X1GTIN: 5901986046318Korpused
No. of drive bays: 4 Dimensions: Product dimension: (L x W x H) 407 x 215 x 455 mm Weight: 6.09 Other features: PCI expension slots: 7 Dust filter: 1 x top, 1 x bottom(PSU) Fans control by: Motherboardremote controllerLED buttonVoice control/ Fans included: 4 x 120 mm ARGB, 6 pin, 1200 RPM (3 x front, 1 x rear) connected to the controller Fan support: front: 3 x 120/140 mm lub 2 x 200 mm rear: 1 x 120 mm top: 2 x 120 (140) mm bottom: 2 x 120 mm Watercooling support: front: 1 x 120/240/360 mm rear: 1 x 120 mm top: 1 x 120/240 mm Product dimension: (L x W x H) 407 x 215 x 455 mm Chassis material: SPCC 0.6 mm Front Panel material: Tempered glass Net/gross weight: 6.09 / 7.14 kg
Unique Design & Powerful Heat Dissipation The AX90 features a unique mesh front panel design and excellent cooling performance. The full-view tempered glass side panel design allows you to show off your gaming configurations without any obstacles. 11 x 120mm fans can be installed simultaneously.
MAG FORGE 112R TAKE THE BATTLEFIELD The MAG Series hardware, computers and components were born out of rigorous quality testing and are designed to stand for strength and durability. Our designers have focused on making the hardware as user-friendly as possible, so the MAG series products feature a simple installation process that, combined with a user-friendly interface, makes them the best choice for first-time gamers. ARGB LIGHT SHOW Create your own ARGB battle station with the MAG FORGE 110 series chassis, which is fully compatible with MSI Mystic Light technology. OPTIMISED AIRFLOW The MAG FORGE 110 series cases are optimised for, large and efficient airflow to cool the system. The MAG FORGE 110 series allows for the installation of up to 6 fans. Insta-Light Loop Button Quickly control the colours of the fan backlighting, the colours of the LED strip on the front panel of the case and the light animation effects with just one Insta-Light Loop button. Now you can easily browse through the profiles and choose your favourite case illumination. MAGNETIC DUST FILTER There is a magnetically mounted filter on the top vents to prevent dust from getting inside the case, yet it can be easily removed for cleaning. TOOL-FREE FASTENING SIDE PANEL The light grey shade of the 4mm side panel, made of tempered glass, is ideal for displaying RGB light effects. At the same time, it provides a very good view of the components inside the PC. The well-thought-out design of the MAG FORGE 112R case allows users to install and remove the tempered glass side panel very easily and safely. Simply place the side panel into the corresponding groove of the case base before installing it.
Wall-mountable showcase case, ATX form factor, designed for custom water cooling, vertical GPU mounting, radiator up to 360 mm, graphics cards up to 400 mm in length.
Obudowa do konstruowania wydajnych komputerów mid tower iCUE LINK 5000T LX RGB Przyciągnij uwagę za pomocą wyjątkowej profilowanej konstrukcji obudowy CORSAIR 5000T LX RGB, w której możesz zbudować idealny system oparty na płycie głównej z odwróconymi złączami. Elegancka stalowa obudowa o wyjątkowym kształcie 3 wentylatory LX120 RGB i koncentrator systemowy iCUE LINK w komplecie Zintegrowane taśmy świetlne RGB Aurora zapewniające rozproszone oświetlenie Działa z płytami głównymi z odwróconymi złączami Zdejmowane panele przedni i górny z siateczki umożliwiające intensywny obieg powietrza Mieści do 10 wentylatorów 120 mm lub 4 wentylatorów 140 mm oraz kilka radiatorów 360 mm System organizacji okablowania RapidRoute EFEKTOWNE LINIETa elegancka obudowa o wyjątkowym kształcie z taśmami świetlnymi iCUE LINK Aurora i wentylatorami iCUE LINK LX120 RGB zapewnia wyraziste i dynamiczne podświetlenie pozwalające podziwiać jej uderzające piękno. OGROMNY POTENCJAŁ CHŁODZENIAPrzestronne wnętrze pomieści nawet 10 wentylatorów 120 mm albo 4 wentylatory 140 mm, a także kilka radiatorów o wysokości 60 mm, w tym z przodu lub boku - o rozmiarze 360 mm oraz w górnej części - o rozmiarze 360 mm w konfiguracji push/pull. PEŁNA FUNKCJONALNOŚĆTa obudowa ma wszystko, czego potrzeba do budowy bardzo wydajnego komputera. ZDEJMOWANE PANELE PRZEDNI I GÓRNYSiateczkowe panele o wyjątkowej konstrukcji, które można łatwo zdjąć, aby dostać się do środka, umożliwiają intensywny przepływ powietrza. DWA OBSŁUGIWANE BEZNARZĘDZIOWO PANELE BOCZNE NA ZAWIASACHŁatwy dostęp do systemu dzięki panelom na zawiasach: jednemu ze szkła hartowanego, eksponującemu wszystkie komponenty, oraz jednemu ze stali z drugiej strony. SYSTEM PROWADZENIA PRZEWODÓW CORSAIR RAPIDROUTEUmożliwia szybkie i łatwe poprowadzenie przewodów przez obszerny 46-milimetrowy ukryty kanał pod płytą główną. OBSŁUGA PŁYT GŁÓWNYCH Z ODWROTNYMI ZŁĄCZAMISprawdzona pod kątem zgodności z płytami głównymi ASUS BTF, MSI Project Zero oraz Gigabyte Project Stealth, które mają złącza z tyłu, dzięki czemu nie psują widoku przez podłączone kable. PROSTA KONSTRUKCJANowoczesna konstrukcja w popularnym formacie obudowy komputerowej 5000T ma wygodne rozwiązania, które ułatwią Ci pracę. PUDEŁKO NA ŚRUBY WIELOKROTNEGO UŻYTKUDzięki dodanemu w zestawie pudełku, w którym wszystkie potrzebne Ci śruby będą bezpiecznie zamknięte, nie zgubisz już żadnej ważnej śrubki. PRZELOTKI FORMOWANE W DWÓCH CYKLACHDzięki miękkim, gumowym przelotkom wewnętrznym umożliwiającym łatwe przeciąganie kabli oraz twardym gumowym przelotkom zewnętrznym, które pewnie trzymają się na miejscu, możesz uniknąć frustracji podczas instalowania przewodów. ŚRUBY QUICKTURN DO WENTYLATORÓWŚruby do wentylatorów CORSAIR QuikTurn są równie wytrzymałe i bezpieczne jak tradycyjne śruby, dzięki czemu montaż wentylatorów w systemie staje się niezwykle prosty. Przydaje się to, gdy wypełniasz obudowę tej wielkości. WIELE MOŻLIWOŚCI CHŁODZENIAStwórz odpowiedni do swoich potrzeb system chłodzenia dzięki miejscu na 10 wentylatorów 120 mm oraz różnorodnym opcjom montażu dwóch radiatorów o maksymalnym rozmiarze 360 mm. NOWOCZESNY PANEL WEJŚĆ/WYJŚĆ Z PRZODUUmożliwia łatwy dostęp do nowoczesnych złączy, w tym do portu USB 3.2 Gen 2 Type-C, 4 portów USB 3.2 Gen 1 Type-A oraz zintegrowanego gniazda audio i mikrofonowego typu jack.
Tootekood: U4 PRO MESH WHITEGTIN: 6970620553047Korpused
Edler Midi-Tower von Jonsbo in Weiß, dezentes Design aus Stahl, mit Seitenteil mit Mesh, Grafikkarten bis 330 mm, bis zu 5x 120-mm-Lüfter möglich, Mainboards bis ATX
HP Serial Port Flex IO v3. Hostiliides: Jada. Päritoluriik: Hiina. Laius: 41,8 mm, Sügavus: 39 mm, Kõrgus: 16,5 mm. Ühilduvus: HP EliteDesk 8 Tower G1i Desktop AI PC; HP EliteDesk 8 SFF G1i Desktop AI PC; HP EliteDesk 8 Mini...
With the Icy Dock ToughArmor MB852M2PO-B, you can replace the old slim CD/DVD drive bay with 2x high-speed M.2 NVMe SSDs. It fits into the 9.5 mm ultra-slim internal mounting bay for optical drives (ODD) and features removable M.2 trays for quick access and effortless maintenance. It is a perfect storage solution for custom industrial PCs, rackmount servers, and embedded systems.TypeHot-swap frameColorblackEAN4713227445320Manufacturer No.MB852M2PO-BIntended useHot-swap frameUseDrive frameSuitable forSSD sizes: 2x M.2 PCIe NVMe SSD (2230/2242/2260/2280/22110)MaterialMetal, partly ABS plasticInstalled drives2x M.2Required mounting bays1x 5.25-inch slimExternal connections2x SFF-8612Internal connectionsM2Further information1x 15-pin SATA power connectorAccessories includedManual, screwsDimensionsWidth: 128.1 mm x Height: 9.5 mm x Depth/Length: 159.3 mmWeight263 g
ATX-korpus • Esi- ja külgpaneel karastatud klaasist • Kahekordne kambristruktuur • Lihtne kaablite haldamine • Mahutab kuni 445 mm pikkuseid graafikakaarte
Стильно и эффективно защитите ваш Raspberry Pi 5 с этим высококачественным алюминиевым корпусом в элегантном черном цвете. Прецизионно изготовленный корпус сочетает современный дизайн с превосходной функциональностью, обеспечивая оптимальное охлаждение и защиту вашего мини-компьютера.