Baltimore 530 Mini tower case 1x USB 3.0 + 2x USB 2.0 + HD audio ABS with hair-line & shinny finish Optional: 1 x 80mm at rear, 120mm at front PCI length/CPU cooler height: 270mm/140mm
Darkflash DS900WS ATX computer case without fans (Black)The Darkflash DS900WS ATX (Advanced Technology eXtended, a standard motherboard format) is a spacious midi tower case that supports ATX, M-ATX (Micro Advanced Technology eXtended, a smaller motherboard format) and ITX (Information Technology eXtended, a compact motherboard format) motherboards, and its interior will accommodate a graphics card up to 425 mm in length and CPU cooling up to 170 mm in height. The case allows the installation of up to 12 120 mm fans and water cooling. This makes the DS900WS ATX suitable for both gaming sets and heavy-duty PCs. The tempered glass side panel allows you to expose the computer's interior, and the presence of 7 PCI-E (Peripheral Component Interconnect Express, an interface for expansion cards) slots and space for 4 drives (2x HDD, 2x SSD) gives you ample room for expansion.Compatibility and mounting spaceThe case supports ATX, Micro ATX and ITX format motherboards, with the power supply mounted at the bottom as standard. Inside, you'll find space for two 3.5" HDDs (Hard Disk Drives) and two 2.5" SSDs (Solid State Drives) - giving you ample space for data, system and games. The user can install a graphics card up to 425 mm long and a CPU cooler up to 170 mm high. There are also 7 PCI-E slots, making it easy to expand the kit with additional cards.Advanced cooling systemThe Darkflash DS900WS ATX offers extremely extensive cooling capabilities. The chassis can accommodate up to 12 120 mm fans, allowing for effective temperature management even under intense load. It is also possible to mount water cooling - up to 240 mm in the front and up to 360 mm on the top. In addition, the rear panel of the case features a large steel ventilation mesh for effective heat dissipation.Practical portsThe top panel features all the necessary connectors: one USB 3.0 (Universal Serial Bus 3.0, a high-speed data transfer connector), two USB 2.0 ports, and an HD (High Definition Audio) audio connector for headphones and microphone. In addition, there is a power and reset button, making it easier to use the computer on a daily basis. The whole thing is designed for convenience and quick access to the most important functions.Durable construction and thoughtful interiorThe case is made of 0.5 mm SPCC (Steel, Plate, Cold Rolled, Commercial Quality - cold rolled structural steel), which ensures stability and resistance to damage. Its dimensions are 470 x 218 x 454 mm, making it compact, but still very roomy. The interior is designed in a way that makes it easier to mount components and run cables, resulting in better airflow and a more organized look. In addition, part of the right panel is made of metal mesh, which not only protects the hardware from dust, but also helps air circulation. On the other hand, the top and bottom parts of the case made of mesh further promote ventilation, and their magnetic design ensures quick and convenient installation/removal.Tempered glass and stylish designThe left side of the case features a tempered glass panel to expose the computer's interior - including fan backlighting and components. An additional wood-style accent on the front adds a subtle but original touch. ManufacturerDarkflashModelDS900WS ATXHousing typeMidi TowerSide panelTempered glassMotherboard standardATX / M-ATX / ITXPower supply standardBottom side, ATXSlots for internal drives3.5" HDD x2 / 2.5" SSD x2Expansion card slots7Max graphics card lengthHorizontal mounting: 425 mmMax CPU cooling height170 mmMax number of fans12Fan mounting optionsRear: 1x 120 mm; Top: 3x 120 mm / 2x 140 mm; Side: 2x 120 mm; Bottom: 3x 120 mm; Front: x3 120 mmWater cooling mounting optionsTop: 360 mm / 240 mm; Front: 240 mmNumber of fans installedNo fans installedType of fansINF24TButtons and controlsPower, ResetConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorBlackHeight454 mmWidth218 mmDepth470 mm
DarkFlash DS900G computer case (black)DarkFlash DS900G is a Middle Tower chassis that offers extensive functionality for demanding users. It supports ATX, Micro-ATX and ITX format motherboards, and its interior accommodates graphics cards up to 425 mm in length and CPU coolers up to 170 mm in height. The interior space is designed for easy access to components and convenient expansion. The DS900G also offers full support for various cooling systems, so it can easily handle demanding gaming or work setups.Full interior displayThe curved side panel made of transparent tempered glass allows a full view of the components installed inside. The slightly rounded surface of the glass creates a panoramic effect that sets the case apart from standard models and allows the backlighting and mounting aesthetics to be fully exposed.Effective coolingThe case is designed for optimal air circulation. It allows the installation of up to 10 120 mm fans or their combination with 2 140 mm fans on the top panel. The design provides for 3 fans on the top, 3 on the side, 1 on the back and 3 on the bottom, allowing for a very efficient cooling system. In addition, up to 360 mm of water cooling can be installed on the top panel, and up to 240 mm on the side.Optimized airflow and noise reductionThe DS900G chassis features densely spaced vents that not only improve airflow, but also effectively trap larger dust particles. The rear panel is equipped with a steel mesh that improves cooling efficiency by up to 15% while reducing noise levels by about 10%.Magnetic dust filtersThere are magnetically attached dust filters on the top and bottom of the case. As a result, they can be easily removed and cleaned without removing other components. This type of solution simplifies the daily maintenance of the computer and helps maintain optimal operating conditions for components.Various expansion possibilitiesThe interior of the chassis was designed for users who want to keep the chassis aesthetically pleasing and tidy, while still having room for all the components they need. The DS900G offers 7 PCIe slots, which gives you the freedom to mount long graphics cards and additional expansion cards. The mounting space has been planned to ensure adequate airflow, room for cable routing and the ability to quickly access critical components.Flexible disk mounting optionsDarkFlash DS900G allows the installation of 2 HDDs in 3.5" format and 2 SSDs in 2.5" format. Depending on the user's needs, various configurations are possible, such as two HDDs and one SSD or one HDD and two SSDs. This allows each user to tailor the storage layout to their own preferences and the specifics of the set.Convenient access to ports and buttonsThe case offers a practical set of ports and buttons on the front panel. The user has one USB 3.0 and two USB 2.0 ports, as well as an HD Audio connector. The front also features Power, Reset and backlight control buttons. ManufacturerDarkFlashModelDS900GHousing typeMiddle TowerSide panelTempered glassMotherboard standardATX, Micro-ATX, ITXPower supply standardATXSlots for internal drives2 × 3.5" (HDD)2 × 2.5" (SSD)Expansion card slots7 PCIe slotsMax graphics card length425 mmMax CPU cooling height170 mmMax number of fansUp to 10 120 mm fansIn addition: 2 140 mm fans (top)Fan mounting optionsTop: 3 × 120 mm or 2 × 140 mmSide: 3 × 120 mmRear: 1 × 120 mmBottom: 3 × 120 mmWater cooling mounting optionsTop: up to 360 mm or 240 mmSide: up to 240 mmNumber of fans installedNo fans installedButtons and controlsPower, ResetConnectors1 × USB 3.02 × USB 2.01 × HD AudioMaterialSPCC 0.5 mmColorBlackHeight454 mmWidth218 mmDepth434 mm
Kaardus karastatud klaaspaneelid • Eelpaigaldatud PWM jahutusventilaatorid • Õhuvoolule optimeeritud korpuse konstruktsioon • Toetab suuri graafikakaarte ja jahuteid • Ruumikas sisemus ja kaablite haldus
Das APNX V2 ist ein Premium-PC-Gehäuse, das für hervorragende Kühlung, elegante Ästhetik und Anpassungsfähigkeit entwickelt wurde. Seine drei abnehmbaren Hartglasplatten bieten einen rahmenlosen Panoramablick, während das X-Pand Flow Design die Gesamtluftströmungsdynamik erheblich verbessert. Mit Unterstützung für bis zu 10 Lüfter, 360-mm-Kühler und zwei 16-cm-Lüfter an der Unterseite sorgt es für eine erstklassige Wärmeleistung. V2 unterstützt gängige Mainboards mit Reverse-Anschluss für eine übersichtlichere Kabelverwaltung. Funktionen wie eine GPU-Halterung, eine abnehmbare Motherboard-Kabelabdeckung und ein austauschbares PSU/HDD-Fach verbessern die Haltbarkeit und Anpassungsmöglichkeiten. Mit vertikaler oder horizontaler 360-mm-AIO-Montage und Unterstützung für den APNX 10-Port-Lüfter-Hub bietet das APNX V2 effiziente Kühlung und mühelose Anpassungsmöglichkeiten für Hochleistungs-Builds.
Clear lines, strong cooling, uncompromising look: With the Steel Shark, Sharkoon presents a stylish two-chamber ATX case that combines modern design with a particularly tidy look. Tempered glass on the front and side, four pre-installed ARGB PWM fans as well as extensive cooling options and BTF support make the Steel Shark the ideal basis for powerful and visually impressive gaming systems. Thanks to the well-thought-out two-chamber design, the Steel Shark clearly separates hardware and power supply including cable management. This creates an extra tidy look in the main area, while cables, drives and power supply can be discreetly stored at the back. The front and side panels of the Steel Shark are made of tempered glass and provide a clear view of the built-in hardware and the integrated lighting. This makes the case perfect for users who want to present their system not only powerfully, but also visually impressively. The Steel Shark is equipped with four 120 mm ARGB PWM fans ex works. These not only ensure an effective airflow, but also skillfully showcase the system visually. A practical ARGB control and a PWM fan hub with five positions are included! A total of up to eleven fans can be installed in the Steel Shark. In addition, the housing supports the simultaneous installation of two radiators and is therefore also aimed at water cooling enthusiasts who want to cool their system particularly efficiently and quietly. In addition to classic ATX motherboards, the Steel Shark also supports models with a BTF design. The rear connection technology further optimizes cable management and further underlines the clean look of the system. The Steel Shark is also flexible when it comes to selecting powerful hardware: It supports graphics cards with a length of up to 424 mm, CPU coolers with a height of up to 168 mm and power supplies with a length of up to 244 mm. Tower case type Color black EAN 4044951044924 Made in China Midi tower design Motherboard form factor ATX Tempered glass material Window Kit Yes Internal dimensions Plug-in card length maximum 424 mm Internal dimensions CPU cooler height maximum 168 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 244 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Slots full size 7 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Front 3 x 120 mm ARGB-PWM fans pre-installed Back 1 x 120 mm ARGB-PWM fan pre-installed Notes Cable management system, graphics card holder, top: 3 x 120 mm fans can be installed, alternatively 2 x 140 mm fans can be installed, bottom: 3 x 120 mm fans can be installed Lighting Yes, RGB RGB connectors addressable RGB header RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling possible Yes Water cooling possible Supported radiators Front: 360 mm, Top: 360/280 mm Rear connection of the motherboard Yes Note If the graphics card is longer than 270 mm, there may be conflicts when installing a radiator in the side Accessories available accessory set Volume 59 l Dimensions Width: 28.5 cm x Height: 45.2 cm x Depth/Length: 46 cm
The NZXT H6 RGB+ (2026) in the elegant all-black version combines modern design, powerful cooling and impressive RGB lighting in a case that was specially developed for demanding gamers and PC enthusiasts. The striking panoramic glass front with seamless corner glazing offers an impressive view of the installed hardware and makes every system a visual highlight on the desk. Thanks to the innovative dual-chamber layout, the power supply, drives and cables are neatly separated from the main system. This not only ensures a tidy look, but also improves the airflow within the case. The angled front fans direct fresh air specifically to the most important components and ensure efficient cooling of the processor and graphics card, even under high load. The H6 RGB+ is equipped with powerful RGB fans ex works, which ensure an optimal balance of cooling performance and impressive lighting effects. The integrated RGB control enables easy synchronization of the lighting and creates individual color accents that perfectly match your own setup. Generous mesh areas and support for numerous additional fans and large water cooling radiators offer maximum flexibility for powerful gaming and high-end systems. With support for ATX, Micro-ATX and Mini-ITX motherboards as well as enough space for modern high-end graphics cards and powerful CPU coolers, the case is ideal for current and future hardware generations. Thoughtful details such as side panels that can be removed without tools, an integrated cable management system and a GPU support make assembly easier and ensure a professional appearance. Tower case type Color black EAN 5056547209357 Manufacturer no. CC-H62FB-P1 H6 series Midi tower design Motherboard form factor ATX Material steel, tempered glass Window Kit Yes Mesh front Yes Internal dimensions plug-in card length maximum 390 mm Internal dimensions CPU cooler height maximum 165 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 200 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Slots full size 7 pieces Slots Slots Tool-free Yes Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Rear 1 x F120mm RGB fan pre-installed Notes Cable management: 90 mm, Nylon dust filter: Bottom, Front Right: 1 x F360 mm RGB reverse fan pre-installed, Top: 3 x 120 mm fans can be installed, 2 x 140 mm fans can be installed, Bottom: 1 x F360 mm RGB reverse fan pre-installed Lighting Yes, RGB Water cooling possible Yes Water cooling possible Supported radiators Top: 360 mm (up to 400 mm), back: 120 mm Rear connection of the motherboard Yes Further information The H6 RGB+ comes with pre-installed RGB fans and Control Hub Lite. Accessories included User manual, mounting accessories, Control Hub Lite, 2 x F360 RGB reverse fans, 1 x F120 RGB fan Volume 55 l Dimensions Width: 29.2 cm x Height: 44.8 cm x Depth/Length: 42 cm Weight 9.3kg
The NZXT H6 RGB+ (2026) in the elegant all-black version combines modern design, powerful cooling and impressive RGB lighting in a case that was specially developed for demanding gamers and PC enthusiasts. The striking panoramic glass front with seamless corner glazing offers an impressive view of the installed hardware and makes every system a visual highlight on the desk. Thanks to the innovative dual-chamber layout, the power supply, drives and cables are neatly separated from the main system. This not only ensures a tidy look, but also improves the airflow within the case. The angled front fans direct fresh air specifically to the most important components and ensure efficient cooling of the processor and graphics card, even under high load. The H6 RGB+ is equipped with powerful RGB fans ex works, which ensure an optimal balance of cooling performance and impressive lighting effects. The integrated RGB control enables easy synchronization of the lighting and creates individual color accents that perfectly match your own setup. Generous mesh areas and support for numerous additional fans and large water cooling radiators offer maximum flexibility for powerful gaming and high-end systems. With support for ATX, Micro-ATX and Mini-ITX motherboards as well as enough space for modern high-end graphics cards and powerful CPU coolers, the case is ideal for current and future hardware generations. Thoughtful details such as side panels that can be removed without tools, an integrated cable management system and a GPU support make assembly easier and ensure a professional appearance. Tower case type Color white EAN 5056547209364 Manufacturer no. CC-H62FW-P1 H6 series Midi tower design Motherboard form factor ATX Material steel, tempered glass Window Kit Yes Mesh front Yes Internal dimensions plug-in card length maximum 390 mm Internal dimensions CPU cooler height maximum 165 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 200 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Slots full size 7 pieces Slots Slots Tool-free Yes Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Rear 1 x F120mm RGB fan pre-installed Notes Cable management: 90 mm, Nylon dust filter: Bottom, Front Right: 1 x F360 mm RGB reverse fan pre-installed, Top: 3 x 120 mm fans can be installed, 2 x 140 mm fans can be installed, Bottom: 1 x F360 mm RGB reverse fan pre-installed Lighting Yes, RGB Water cooling possible Yes Water cooling possible Supported radiators Top: 360 mm (up to 400 mm), back: 120 mm Rear connection of the motherboard Yes Further information The H6 RGB+ comes with pre-installed RGB fans and Control Hub Lite. Accessories included User manual, mounting accessories, Control Hub Lite, 2 x F360 RGB reverse fans, 1 x F120 RGB fan Volume 55 l Dimensions Width: 29.2 cm x Height: 44.8 cm x Depth/Length: 42 cm Weight 9.3kg
Beautifully crafted and engineered to maximize cooling potential with its amazing expansion flexibiltiy, the Enthoo Pro is the budget friendly full-tower from Phanteks. Embracing many features from the Enthoo Primo, without the price tag. This case has multiple radiator support, removable SSD bracket, closed HDD panel, and velcro cable management. The Enthoo Pro, trying to establish its own solid reputation like the award winning Enthoo Primo.KujutegurFull-TowerTüüpPCMaterjalPlast, Teras5,25" lahtrite arv33,5" lahtrite arv6Emaplaadi toetatud kujuteguridATX,EATX,Mini-ATXToote värvMustAknagaJah2,5" salvede arv7Sisseehitatud kõlar(id)EiCPU jahuti maksimaalne kõrgus19,3 cmGraafikakaardi maksimaalne pikkus47,2 cmKaasas toiteplokkEiToiteploki asukohtPõhiUSB 2.0 portide arv2USB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendJahAudioväljundJahInstallitud esiventilaatorid1x 200 mmMaksimaalne esiventilaatorite arv2Toetatud esiventilaatorite läbimõõt120,140,200 mmMaksimaalne tagaventilaatorite arv1Toetatud tagaventilaatorite läbimõõt120,140 mmMaksimaalne ülemiste ventilaatorite arv3Toetatud ülemiste ventilaatorite läbimõõt120,140,200 mmMaksimaalne alumiste ventilaatorite arv2Toetatud alumiste ventilaatorite läbimõõt120,140 mmVentilaatori kiirus1200Toetatud kõvakettasuurused2.5,3.5"Integreeritud kaardilugejaEiJuhtmehaldusJahLähtestusnuppJahLaius235 mmSügavus550 mmKõrgus535 mmJuhendJahKasutusjuhendJahPakendi kaal11,9 kg
The Grandia GD10, along with GD09, is a culmination of SilverStone’s decade-long experience in HTPC case design and manufacturing into a product that every PC enthusiast can enjoy. The incredible efficiency in which it utilizes all available space results in a case that is close in size externally to Micro-ATX based GD04 and GD05, yet capable of fitting most important full size standard components including wider ATX motherboards (SSI-CEB) such as ROG or other gaming-centric models. All drive cages have been designed similarly to those from the popular ML03 case to provide maximum flexibility in drive configuration without the need for additional adapters. For cooling, all positive pressure and smooth airflow designs were retained from previous Grandia models while improvements were made to filter access for even easier maintenance. With the addition of a lockable front door, the GD10 offers an attractively sized case that is capable and user-friendly for those interested in building a system with extra security and application that exceeds typical PC or HTPC environments.- Lockable front door ensures security of system and drives- Positive air pressure design for excellent cooling/quietness and dust-prevention- Support expansion cards up to 12.2 inches- Support ATX motherboards- Quick access filters included- Incredible 362mm depth to fit comfortably inside home theater cabinet- Drive cages with multi-purpose mounts eliminate need for adaptersFormat ATX, SSI-CEBMaximum graphics card lenght 310 mmMaximum CPU-Cooler Height 138 mmSpecial Featuress two 120-mm-Fan auf der rechten Seite included (900 U/min, 18 dB(A)); ein 120-mm-Fan auf der linken Seite included (900 U/min, 18 dB(A)), compatible with 80-mm-FanPower Supply SlotDesign ATXDrive Baysexternal 5,25 inches 1internal 3,5 inches 22,5 inches 1FansIncluded 3x 120 mmInstallable 2x 80 mmFront-SidePorts USB 3.0 2Audio 2Back-SideSlots Full-Size 7additional Full-Size 1Product dimensions 442 x 171 x 362 mmWeight 4.8 kg
The Jonsbo D31 MESH mATX case is a sleek and versatile option for building a powerful computer. Its front mesh design allows for optimal airflow and its tempered glass side panel adds a touch of elegance. The case can accommodate up to 8 fans and 3 radiators, and can fit GPUs up to 400mm in length. The versatile layout allows for a customizable and optimized use of space.
