La Prima Formula Button Box V2: Neuauflage der praktischen Bedienoberfläche Mit der Neuauflage der Asetek SimSports La Prima Formula Button Box bietet Asetek ein Lenkrad mit einer Vielzahl an Bedienmöglichkeiten. Fünf Drehschalter (davon zwei an deinen Daumen), zwei Kinky-Switches, zwei Schaltwippen, und zwölf normale Tasten stellen zusammen 21 Bedienelemente dar und gewährleisten dir optimale Kontrolle über das Geschehen. Besonders viele Bedienelemente Damit könntest du neben einem Rennfahrzeug aus der DTM oder einem F1-Flagschiff sogar einen Lkw oder einen Traktor effektiv steuern. Die integrierte LED-Schaltanzeige ist nicht nur praktisch, sondern bietet zusammen mit den LED-Ringen an den drei Drehschaltern besonders im Dunkeln ein schickes Erscheinungsbild.
Tootekood: D32 PRO BLACKGTIN: 6970620554327Korpused
With the D32 series, Jonsbo targets everyone who wants to build their PC in a space-saving way. Unlike the D32 STD, the D32 PRO PC case is aimed at the high-end segment with special and practical features such as Back-Connect or improved front I/O. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for Back-Connect motherboards Tempered glass side panel ensures a subtle appearance Plenty of room for cooling solutions allows installation of high-performance hardware Three dust filters protect your hardware from annoying dust particles The Jonsbo D32 PRO Black: Space-saving and subtle case for high-end hardware Whether you’re building a midrange HTPC or a high-end PC – the D32 PRO Black from Jonsbo comfortably accommodates all kinds of builds. This minimal case fits graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height. In Back-Connect mode, the maximum CPU cooler height is reduced by around seven millimeters. This ensures that, even with the case’s compact design, your hardware gets adequate cooling. Working together with up to six 120 mm fans or one 120 mm fan and four 140 mm fans, the fans ensure enormous airflow inside the case. No cable clutter with Back-Connect With Back-Connect motherboards like ASUS’s BTF series, MSI’s PROJECT ZERO series, or GIGABYTE’s Stealth series, the case in B-mode—with about six to seven millimeters more space—remains almost completely free of visible cable clutter. Since most power and connection cables can be connected at the back of the motherboard, you save time on cable management and still have a clean look inside your case. Combined with the tempered glass side window, your hardware is always on display in an especially appealing way. Powerful cooling in a small space To ensure your powerful hardware stays adequately cooled in this compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for plenty of airflow, a large dual-tower CPU cooler, or even an installable 240 mm AiO, your hardware always stays cool, even under load. Three dust filters on the front, top, and bottom make sure your hardware stays free from dust and dirt. This keeps your temperatures at optimal levels and, among other things, helps extend your hardware’s lifespan.
Midi-tower case with four pre-installed D-RGB fans 360mm radiator support at the top for optimal cooling performance Compatible with ASUS BTF and MSI Project Zero motherboards Tempered glass side window for an unobstructed view of your components Glacier One 360M25 Gen2 with powerful pump and RGB lighting Three quiet M25-G2 fans with high static pressure Integrated VRM fan on the pump cover High-quality build and optimized airflow Optimal Cooling Meets Stylish Design The XT Pro Ultra offers space for up to ten fans and supports radiators up to 360mm at the top. With four pre-installed 140mm D-RGB fans, it provides excellent airflow right out of the box. The mesh front panel and tempered glass side panel combine functionality with aesthetics. The Glacier One 360M25 Gen2 AiO cooler delivers excellent cooling performance thanks to its powerful pump and three optimized 120mm PWM fans—ideal for high-end Intel and AMD CPUs. Integrated D-RGB lighting ensures a clean yet spectacular look. Room for High-End Components The XT Pro Ultra provides space for graphics cards up to 415mm in length and CPU coolers up to 184mm in height. The case is also ready for vertical GPU mounting and offers enough space for 2x 3.5" and 5x 2.5" drives. ATX and even E-ATX motherboards fit easily as well. Cable-Friendly, Modern Setup Thanks to support for rear-connector motherboards like ASUS BTF and MSI Project Zero, your system can be especially tidy. The Glacier One 360M25 Gen2 supports you with a single control cable for RGB lighting—for a clean build without cable clutter. Quiet & Powerful: The M25-Gen2 Fans The M25-Gen2 fans are designed for radiators and deliver high cooling performance at an ultra-quiet 35.13 dB(A)—with an airflow of 123.55 m³/h and a static pressure of 2.51 mmH2O. Rubber pads prevent disturbing vibrations and the PWM mode automatically adjusts the speed to requirements. With the Phanteks XT Pro Ultra & Glacier One 360M25 Gen2 bundle, you get a perfectly matched combination of case and water cooling, merging performance, cooling, and design at the highest level.
Midi-tower case with four pre-installed D-RGB fans 360 mm radiator support on the top for optimal cooling performance Compatible with ASUS BTF and MSI Project Zero motherboards Tempered glass side window for an unobstructed view of your components Glacier One 360M25 Gen2 with powerful pump and RGB lighting Three quiet M25-G2 fans with high static pressure Integrated VRM fan on the pump cover High-quality build and optimized airflow Optimal cooling meets stylish design The XT Pro Ultra offers space for up to ten fans and supports radiators up to 360 mm on the top. With four pre-installed 140 mm D-RGB fans, it ensures excellent airflow right out of the box. The mesh front panel and tempered glass side panel combine functionality with aesthetics. The Glacier One 360M25 Gen2 AiO cooler delivers excellent cooling performance thanks to its powerful pump and three optimized 120 mm PWM fans—ideal for high-end Intel and AMD CPUs. The integrated D-RGB lighting ensures a tidy yet spectacular look. Room for high-end components The XT Pro Ultra gives you space for graphics cards up to 415 mm in length and CPU coolers up to 184 mm high. The case is also prepared for vertical GPU mounting and offers enough room for 2x 3.5-inch and 5x 2.5-inch drives. ATX and even E-ATX motherboards fit in easily as well. Cable-friendly, modern setup Thanks to support for rear-connector motherboards like ASUS BTF and MSI Project Zero, your system can be kept especially tidy. The Glacier One 360M25 Gen2 supports you with a single control cable for RGB lighting—for a clean build with no cable clutter. Quiet & powerful: the M25-Gen2 fans The M25-Gen2 fans are designed for radiators, delivering high cooling performance at only 35.13 dB(A)—with an airflow of 123.55 m³/h and a static pressure of 2.51 mmH2O. Rubber pads prevent disruptive vibrations, and the PWM mode automatically adjusts the speed as needed. With the Phanteks XT Pro Ultra & Glacier One 360M25 Gen2 bundle, you get a perfectly coordinated combination of case and water cooling that brings performance, cooling, and design together at the highest level.
After introducing the RAVEN Z series in 2014 to great acclaim with the revolutionary RVZ01, the RAVEN team has created another segment defining design in the RVZ02. With a volume of only 12 liters, this case is not only slimmer but is actually easier to assemble compared to the RVZ01 or any other slim case before it. Similar to many SilverStone small form factor cases, there is plenty of room for a powerful graphics card up to 13 inches in length available while tool-less drive cages have been implemented to make assembly quicker than ever. With clever space utilization and engineering, two major heat sources of a PC are separated via the chassis’ main chamber so CPU and graphics card can each have their own airflow path. Despite its diminutive size, the RVZ02 is a remarkably versatile case that can be used anywhere from being a compact desktop workstation (in vertical orientation) to a living console or HTPC (in horizontal orientation), making it truly perfect for just about any slim PC build.- Highest performance capability in super slim form factor- Support graphics card up to 13 inches- Mini-ITX motherboard & SFX PSU compatible- Independent expansion slot design for easy assembly- Tool-less drive cage design- Fits in nearly any environment with horizontal or vertical orientationKujutegurSmall Form Factor (SFF)TüüpPCMaterjalPlast, TerasEmaplaadi toetatud kujuteguridMini-ITXToote värvMust, HõbeAknagaJah2,5" salvede arv2SobilikKodu/kontorMahutavus12 lLaienduspesade arv2CPU jahuti maksimaalne kõrgus5,8 cmGraafikakaardi maksimaalne pikkus33 cmToetatud elektritoite tarne vormi faktoridSFXToiteallikate arv1USB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendJahAudioväljundJahToetatud kõvakettasuurused2.5,3.5"Toetatud kõvaketaste arv2Laius380 mmSügavus370 mmKõrgus87 mmKaal3,3 kg
Ultrakompaktes Thin-Mini-ITX-Gehäuse, mit Rackmount-Frontblende, aus schwarzem Aluminium gefertigt, OEM-Version ohne Logo, extrem flach & passiv kühlend, zwei 2,5-Zoll-Slots, je zwei USB-3.0/2.0-Ports
No. of drive bays: 8 Weight: 6.52 Other features: CPU cooler height limitation: 170mm PSD length limitation: 170mm VGA length limitation: 260mm (With radiator on the right side) 366mm (Without radiator on the right side) Cooling System Front (Intake): 120 x 120 x 25mm Addressable RGB fan (1000rpm, 27.2 dBA) x 3 Rear (exhaust): 120 x 120 x 25 mm fan (1000rpm, 26 dBA) x 1 Fan Support Front: 3 x 120mm Top: 2 x 120mm, 1 x 140mm Rear: 1 x 120mm Right Side(In front of M/B Tray): 2 x 120 mm Bottom(On the power cover): 2 x 120 mm
Ultrakompaktes Thin-Mini-ITX-Gehäuse, mit Rackmount-Frontblende, aus schwarzem Aluminium gefertigt, OEM-Version ohne Logo, extrem flach & passiv kühlend, vier interne 2,5-Zoll-Slots, je zwei USB-3.0/2.0-Ports
Kompaktes Gaming-Gehäuse, aus hochwertigem Aluminium in Silber, für Mini-ITX-Mainboards (Intel & AMD) & SFX-PSUs, Dual-Slot-GPU bis 33 cm, 6x 2,5- oder 3x 3,5-Zoll-Drives
Internal 2x 2.5 "/3.5" (transverse, drive rails), 1x 2.5 "/3.5", 4x 2.5 ", Front I / O 2x USB-A 3.0, 1x microphone, 1x headphones, PCI slots 10 (3x riser card), Fan (front) 1x 140mm (RGB illuminated) or 3x 140mm (optional), Fan (rear) 1x 140mm (RGB illuminated), Fan (top) 2x 140mm (optional), Radiator sizes 120/240/280 / 360mm in front, 120 / 240mm above, 120mm in the back, Mainboard up to ATX (E-ATX with unknown dimensions possible), Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6") / ATX (12 "x9.6") / E-ATX (unknown dimensions), Power supply ATX (max. 233mm deep), PSU position below, CPU cooler max. 180mm height, Graphics cards max. 387mm (without radiator), Color black, inside black, Lighting RGB header 3-pin ARGB (+ 5V / DATA / GND), integrated LED control, integrated RGB-LED lighting, illuminated fans, Dimensions (WxHxD) 230x502x491mm, Volume 56.69l, Enclosure type miditower, Special features Cable management, dust filter, graphics card holder, incl. Fan control, viewing window made of glass, Note Mainboard and case manufacturers refer to different dimensions as E-ATX. This manufacturer does not provide any information on supported E-ATX dimensions. Mainboards with E-ATX / SSI EEB dimensions of 305x330mm or 12 "x13" may not be supported, w/o psu, AEROPGSVISOR-G-BK-V1
Internal 6x 2.5 "/3.5", 2x 2.5 ", 8x 2.5" /3.5 "(optional), 2x 2.5" (optional), Front I / O 1x USB-C 3.1 (20-pin Key-A header), 2x USB-A 3.0, 1x microphone, 1x headphones, PCI slots 9 (2x riser card), Fan (front) 2x 140mm, 1000rpm, 18.9dB (A) or 3x 140mm (optional), Fan (rear) 1x 140mm, 1000rpm, 18.9dB (A), Fan (top) 3x 140mm (optional), Fan (other) 2x 140mm (optional), Radiator sizes 120/140/240/280 / 360mm in front, 120/140/240/280/360 / 420mm above, 120/140/240 / 280mm below, 120mm in the back, Mainboard up to ATX (285mm wide), Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6") / ATX (12 "x9.6") / E-ATX (12 "x11.2"), Power supply ATX (max. 250mm deep), PSU position below, CPU cooler max. 185mm height Graphics cards max. 315mm (491mm without HDD cage without front fan, 467mm without HDD cage with front fan), Color anthracite, inside anthracite, Lighting without lighting, Dimensions (WxHxD) 240x475x541mm, Volume 61.67l, Weight 10.50kg, Enclosure type miditower, Special features Cable management, dust filter, integrated fan control, window made of glass Note Mainboard and case manufacturers refer to different dimensions as E-ATX. Mainboards with E-ATX / SSI EEB dimensions of 305x330mm or 12 "x13" are not supported, w/o psu, FD-C-MES2A-04
Vielseitiges Mini-ITX-Gehäuse mit Außenwänden aus Aluminium, für Mini-ITX- und -DTX-Boards, modulares Design und viele Konfigurationsmöglichkeiten, Radiatoren bis zu 240 mm, kompatibel zu ATX-Netzteilen, unterstützt 3-Slot-Grafikkarten bis 33 cm
