Tootekood: D32 PRO MESH BLACKGTIN: 6970620554341Korpused
With the D32 series, Jonsbo targets everyone who wants to build their system in a space-saving manner. Unlike the D32 STD, the D32 PRO PC case is aimed at the high-end segment with special and practical features such as back-connect and improved front I/O. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for back-connect motherboards Mesh side panel for a subtle appearance Plenty of space for cooling solutions allows the installation of powerful hardware Three dust filters protect your hardware from annoying dust particles The Jonsbo D32 PRO Mesh: Compact and subtle case for high-end hardware Whether midrange HTPC or high-end PC – builds of all types fit comfortably in the D32 PRO Mesh by Jonsbo. The minimalistic case accommodates graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height. In back-connect mode, only the maximum CPU cooler height is reduced by about seven millimeters. Thus, despite the compact design of the case, adequate cooling for your hardware is ensured. Working with up to six 120 mm fans or one 120 mm and four 140 mm fans, airflow inside the case is enormous. No cable clutter with back-connect With back-connect motherboards, such as those from ASUS’s BTF series, MSI’s PROJECT ZERO series, or GIGABYTE’s Stealth series, the case in B-mode, with approximately six to seven millimeters more space, is nearly free from visible cable clutter. Since most power and connection cables can be plugged in at the back of the motherboard, you save on cable management while still maintaining a clean look inside your case. Powerful cooling in a small space To ensure your high-performance hardware is sufficiently cooled in such a compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans providing sufficient airflow, a large dual-tower CPU cooler, or even an installable 240 mm AiO, your hardware stays cool – even under load. Three dust filters at the front, top, and bottom make sure your hardware stays free from dust and dirt. This keeps your temperatures always at an optimal level and also extends the lifespan of your hardware.
PC case Volcano Space XL ARGB Full Tower 5 fans, white Youre investing in a top-tier processor, a powerful graphics card, fast RAM, and a solid motherboard, so why would you hide them from yourself and other household members? The MODECOM Volcano Space XL Full Tower is a case designed so that your computer can finally look truly impressive. The front and side tempered-glass panels create a full visual showcaselike hardware displayed in a glass cabinet. Every detail, every ARGB effect (if you install illuminated fans), and every line of your configuration is visible and highlighted by this majestic chassis. MODECOM Volcano Space XL was designed for those who love personalization and perfect internal cable management, while also needing a spacious Full Tower case. Support for motherboards with reversed connectors allows you to build a modern interior without having to expose cables. Thanks to snap-on panels, you gain quick access to the inside. Installing components, upgrading hardware, and cleaning the interior become even easier. The spacious interior gives you full freedom: large E-ATX boards, robust water cooling (up to 420 mm), long graphics cards, and all the components you need for your gaming setup. With the MODECOM Volcano Space XL, your computer will know no limitsand it will look exactly the way it deserves. If you love technology, need plenty of room for expansion, and want your hardware always within sight, the MODECOM Volcano Space XL Full Tower is made for you. Especially in the Volcano Space XL NF version, which gives you complete freedom to configure cooling according to your preferences, as it comes without pre-installed fans. Because bigger can do more. 5 x 140 ARGB RIGHT FROM THE START The right operating temperature is the key to longevity and cool performance of any computer. The MODECOM Volcano Space XL was designed to ensure that your components always work in optimal conditions. As standard, you get five high-performance ARGB fans: three 140 mm fans on the side panel (in a reversed layout) and two 140 mm fans at the back of the case. This setup provides efficient airflow that effectively cools the processor and graphics card, even during intense and long gaming sessions. If you need even more cooling options, the MODECOM Volcano Space XL gives you full freedom to expand. On the top panel, you can install an additional three 120 mm fans, and in the bottom section up to three 120 or 140 mm fans. Additionally, near the PSU shroud, there is space for two more 120 or 140 mm fans if you are not using a top-mounted water-cooling system. More fans mean more stable temperatures and higher performance - and for advanced components, its a necessity.
The Jonsplus BO400CG is a premium showcase case for enthusiasts who want to stylishly display their hardware. With a curved glass panel, modular design, and plenty of space for high-end components, it combines design, flexibility, and strong cooling performance. Curved glass showcase impressively highlights your hardware Supports ATX, Micro-ATX, and Mini-ITX motherboards for flexible builds Spacious interior for long GPUs and tall CPU coolers Modular covers allow for customized look and airflow adjustment Extensive fan and radiator options for powerful cooling Panoramic design with curved glass The BO400CG stands out from classic cases with its curved glass panel. The gently curved glass surface creates a continuous panoramic look without sharp edges, so your hardware is perfectly displayed from nearly any angle. Premium materials and clever modularity The sturdy aluminum frame not only gives the case an elegant appearance but also aids in heat dissipation. Tool-less removable side panels and interchangeable covers make assembly and later adjustments easy. Cable management solutions ensure a clean appearance. Plenty of space for high-end hardware and cooling With support for graphics cards up to 435 mm, CPU coolers up to 173 mm, and power supplies up to 200 mm, the BO400CG is suitable for even the most powerful systems. Up to ten 120 mm fans or several large radiators allow for effective air or water cooling, even under heavy load.
This professional server tower case is specifically designed for high-performance server and workstation configurations. It offers outstanding flexibility, generous space for components, and is ideal for demanding IT environments. The case supports up to 2x 5.25" drives—such as for hot-swap frames, removable frames, or other devices—and up to 8x 3.5" hard drives, making it perfect for large storage configurations. Additionally, there is room for 8 expansion slots—for GPU, RAID, network, or other PCIe cards. The motherboard support goes up to E-ATX, making it suitable for high-end server and workstation motherboards. Three built-in 120 mm fans in the center console and 2x 80 mm fans in the rear panel ensure optimal airflow. Ideally suited for servers, NAS systems, video editing workstations, virtualization, or compute-intensive applications—this case provides the perfect platform for your custom high-end system.
With the TRYX FLOVA F50, you can build your perfect gaming PC. The midi-tower combines a sleek, modern design with thoughtful airflow. Whether you're creating a gaming PC, a creator workstation, or a powerful all-rounder, the FLOVA F50 provides the ideal foundation. Quiet operation: Optimized cooling system ensures low noise levels Outstanding airflow: Special cross-flow fan concept for excellent cooling Ample space for hardware: Graphics cards up to 420 mm in length Radiator support: Up to 360 mm space for AiO water cooling Well-equipped I/O panel: USB-C 3.2 on the side TRYX FLOVA F50: Midi-tower with stylish design TRYX FLOVA F50 Pink front view The FLOVA F50 has a clean and understated look. The front and side elements feature a fabric finish, giving it a cozy and minimalist appearance while ensuring plenty of fresh air inside. This case fits seamlessly into your gaming room, office, or living room. Powerful airflow with clever air circulation TRYX FLOVA F50 interior with fans Inside, the TRYX Cross-Flow System (TCF) provides a strong supply of fresh air. The fans direct air at a 90-degree angle through the case, efficiently cooling your graphics card and CPU. At the same time, your gaming system stays pleasantly quiet—around 20 dB(A) at 1,100 rpm. This means you get strong cooling without having your PC constantly audible during every task. Plenty of space for modern high-end hardware You can install even large components in the FLOVA F50. Graphics cards up to 420 mm long fit easily. Air coolers can be up to 170 mm high. For water cooling, the FLOVA F50 supports radiators up to 360 mm. Ready for current motherboard generations Supports ATX motherboards Compatible with back-connect designs (BTF / Project Zero) Clean cable management Tool-free assembly in many areas Especially with motherboards featuring rear connectors, you benefit from a particularly tidy interior. Cables disappear from view, giving your build a much cleaner look. I/O panel with USB-C On the side, you'll find an I/O panel with USB-C 3.2, allowing you to easily connect fast external devices without having to reach to the back of your case. It's easily accessible and matches the sleek overall concept of the case. Ideal for gaming, creative work, and quiet setups TRYX FLOVA F50 Pink in a setup Whether you’re planning a quiet creator PC or a powerful gaming machine, the TRYX FLOVA F50 gives you a case that reliably dissipates your components’ heat without being overly loud. It’s the perfect choice if you value quiet operation, strong airflow, and a subtle yet high-quality design. It doesn’t seek attention but impresses with its thoughtful details.
The Jonsbo X400 combines a striking design with maximum cooling performance – ideal for high-end setups with modern back-connect motherboards. The mix of steel, tempered glass, and technical ABS ensures a robust case with showroom character. Supports ATX, M-ATX, and ITX – also with a back-connect layout Up to 13 fans: 3 top, 3 side, 2 rear, 2 backside, 3 bottom Dual radiator support up to 360 mm – e.g. for AiO & custom loop GPU up to 427 mm, CPU cooler up to 176 mm – maximum hardware freedom USB-C (Gen 2) + 2x USB-A and audio/mic on the front panel Maximum space for high-end hardware The X400 offers uncompromising space for large GPUs, tall air coolers, and power supplies up to 180 mm. Perfectly suited for builds with powerful hardware and modern cable management via back-connect motherboards. Massive cooling capacity With up to 13 fans, the case offers an enormous airflow foundation. In addition, two radiators up to 360 mm can be installed – ideal for push/pull configurations or dual AiO setups. Elegant design meets technology Reinforced ABS frame, tempered glass, and a functional I/O panel make the X400 an eye-catcher with thoughtfully designed features. Thanks to USB-C, you are also well equipped for modern peripherals.
We designed our Silentware Air 1000 to make building a PC a breeze, even for beginners, and eliminate the need to worry about space, airflow, or cabling. Our high-quality mesh case comes with four pre-installed fans, ensuring good airflow and thus efficient cooling of the components. The case offers plenty of space for all kinds of components, as well as an integrated and adjustable GPU mount for large graphics cards. Our fans are also connected via daisy chain, making them easy to connect to the motherboard – without the need for annoying adapters, additional controllers, or software. Our cooling concept relies on a large mesh front for unobstructed airflow. We also use a total of three very quiet and high-performance fans with FDB (hydrodynamic sleeve bearings). Three large 140mm fans in the front and another 140mm fan at the rear of the case push a high volume of air through the case. All fans are equipped with a 4-pin connector and can therefore be controlled for quiet operation. Since we use high-quality models with full-fledged A-RGB lighting (3-pin) for our fans, you can control the fans entirely via your motherboard. This allows you to not only set and synchronize stunning lighting effects, but also adjust the fan speed thanks to the 4-pin connector and create your own fan curves. Furthermore, the fans are connected via daisy chain, so you only need to use one connector on your motherboard each. Type Tower case Color black EAN 4170000177180 Manufacturer No. AIR1000BLACK Midi-Tower design Motherboard form factor E-ATX Material tempered glass, steel Window Kit Yes Mesh front Yes Internal dimensions Plug-in card length maximum 400 mm Supported radiators front: 120/240/280/360 mm, top: 120/240/280/360 mm, rear: 120/140 mm. 3.5 inch internal drive bays (2 pieces) Slots Full-Size 7 pieces Front connections 2x audio, 1x USB-A 2.0, 2x USB-A 3.2 Gen 1 (5 Gbit/s) Front panel 3 x 140 mm ARGB fans with hydro bearing pre-installed, alternatively 3 x 120 mm fans can be installed Rear 1 x 140 mm ARGB fan with hydro bearing pre-installed, alternatively 1 x 120 mm fan can be installed Notes Cable management, cover: 3 x 120 mm fans can be installed, alternatively 3 x 140 mm fans can be installed Lighting Yes, RGB RGB connectors addressable RGB header RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling possible Yes Rear connection of the mainboard No Further information Removable metal mesh cover, adjustable GPU holder, vertical installation of the graphics card possible Volume 49 l Dimensions Width: 23.4 cm x Height: 47.9 cm x Depth/Length: 44 cm
Our Silentware Air 2000 ARGB White is the ideal choice for high-end gaming PCs. Thanks to four large 140 mm Silentware RF140 ARGB PWM fans and three 120 mm Silentware RF140 ARGB PWM fans with reverse flow pre-installed, and the front panel optimized for high airflow, perfect cooling for even the most powerful hardware is guaranteed at all times. The airflow from the three (recessed) 140 mm reverse-flow fans is directed straight at the graphics card, supplying it with cool fresh air from the lower chamber. In addition to the traditional front-to-back airflow of classic tower cases, the Air 2000 allows for enhanced use of the chimney effect from bottom to top. This is particularly beneficial for high-power graphics cards. The Air 2000 White is therefore the Silentware case with the potentially most powerful cooling for all components. With space for graphics cards up to 395 mm long and CPU coolers up to 175 mm high, this case is perfect for high-end hardware. All-in-one (AIO) liquid coolers are supported with radiators up to 420 mm in length at the front. Buyers therefore have the freedom to choose between high-end air coolers and AIO water cooling systems. Particularly ambitious enthusiasts also have the option of creating complex custom loop water cooling systems with an additional 360 mm radiator at the top of the case. Tower case type Color white EAN code 4262483960219 Manufacturer No. AIR2000WHITE Made in China Midi-Tower form factor Motherboard form factor E-ATX Material tempered glass, steel Window Kit Yes Mesh front Yes Internal dimensions: Maximum plug-in card length 395 mm Supported radiators: Front: 240/360/420 mm, Top: 240/360 mm 3.5-inch internal drive bays (2 pieces) Full-size slots, 7 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 2.0 (480 Mbit/s) Front panel: 3 x 140 mm ARGB RF140 with pre-installed hydro-bearing fans Rear panel: 1 x 140 mm ARGB RF140 with pre-installed hydro-bearing fan Cable management notes, underside: 3 x 120mm ARGB RF120 reverse-flow fans with hydro bearing pre-installed Lighting: Yes, RGB RGB connectors addressable RGB header RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling possible: Yes Rear connection of the motherboard: Yes Note: Four 140 mm and three 120 mm fans are connected in series (daisy-chain). Therefore, a total of two 4-pin PWM and two 3-pin 5V RGB connectors are required on the motherboard to fully control all case fans. Volume 59 l Dimensions: Width: 23.8 cm x Height: 53.5 cm x Depth/Length: 46.4 cm
With the TRYX FLOVA F50, you can build your perfect gaming PC. This mid-tower combines a calm, modern design with well-thought-out airflow. Whether it's a gaming PC, creator workstation, or powerful all-rounder, the FLOVA F50 gives you the right foundation. Quiet operation: Optimized cooling system ensures low noise levels Outstanding airflow: Special cross-flow fan concept for effective cooling Plenty of space for hardware: Graphics cards up to 420 mm in length Radiator support: Space for AiO liquid cooling radiators up to 360 mm Well-equipped I/O panel: USB-C 3.2 on the side TRYX FLOVA F50: Mid-tower with stylish design TRYX FLOVA F50 White front view The FLOVA F50 looks tidy and understated. The front and side panels feature a fabric finish. This gives it a homely, minimalist look while also providing enough fresh air inside. That means the case fits not only in your gaming room, but also in your office or living room. Powerful airflow with clever air routing TRYX FLOVA F50 interior Inside, the TRYX Cross-Flow System (TCF) ensures a strong supply of fresh air. The fans direct the airflow through the case at a 90-degree angle. This delivers fresh air directly to your graphics card and CPU. At the same time, your gaming system stays pleasantly quiet - at around 20 dB(A) at 1,100 rpm. So you get strong cooling without your PC being constantly audible during every task. Plenty of room for modern high-end hardware You can also install large components in the FLOVA F50. Graphics cards up to 420 mm long fit without issue. Air coolers can be up to 170 mm tall. For liquid cooling, the FLOVA F50 supports radiators up to 360 mm. Ready for current motherboard generations Supports ATX motherboards Compatible with back-connect designs (BTF / Project Zero) Clean cable management Tool-free installation in many areas Especially with motherboards featuring rear-side connectors, you benefit from an especially tidy interior. Cables disappear from view and your build looks much cleaner. I/O panel with USB-C On the side, you'll find an I/O panel with USB-C 3.2. This lets you connect fast external devices without having to reach around to the back of your case. It is easy to access and matches the case's clean overall concept. Ideal for gaming, creative work, and quiet setups TRYX FLOVA F50 White in a setup Whether you're planning a quiet creator PC or a powerful gaming machine, the TRYX FLOVA F50 gives you a case that reliably dissipates heat from your components without becoming excessively loud. It is the perfect choice for you if you value quiet operation, strong airflow, and a subtle, premium design. It does not demand attention - but impresses in the details.
Compact ATX mid-tower with tempered glass, integrated 7-inch LCD, targeted cooling from below and the side, 360mm radiator support Do you want to not only showcase your hardware but also give your build a personal touch? The Phanteks XT V5 LCD combines a tempered glass side panel with a built-in 7-inch display. You can use it to show system information or your own images, while the fan layout at the bottom and side supplies fresh air to your gaming hardware. Integrated 7-inch LCD: For system information and custom content Showcase design: Tempered glass reveals your hardware Targeted cooling: Fan positions at the bottom and side For larger water cooling setups: Supports radiators up to 360 mm Lighting included: Pre-installed RGB fans Flexible hardware compatibility: For ATX, Micro-ATX, and Mini-ITX The 7-inch LCD makes your build more personal The integrated display gives your PC a special visual highlight. You can display system values or your own images and graphics on it, designing the case to match your setup. Combined with the tempered glass side panel, this creates a build where both the installed components and the display are part of the overall look. Important system values at a glance You can show system information on the integrated LCD. This way, you don’t have to keep an additional program open on your monitor to check important values constantly. Clear view of hardware and lighting The tempered glass side panel keeps your graphics card, motherboard, RAM, and RGB lighting visible. The display complements this showcase look without overshadowing the actual hardware. The black case provides a subtle frame and gives you plenty of freedom when choosing your components and lighting. Fresh air from below and the side The possible fans at the bottom and side direct cool air straight to the central components. The graphics card especially benefits from the airflow coming from the lower section. Pre-installed RGB fans support air exchange while adding visible light accents behind the glass panel. Design and cooling intelligently combined While the LCD and glass panel showcase your build, the ventilation directed at the bottom and side supplies fresh air to the graphics card, motherboard, and CPU cooling. Space for a 360 mm radiator For cooling your processor, the Phanteks XT V5 LCD supports a radiator up to 360 mm. This allows you to integrate a larger water cooling setup into your build. Additional fans give you the option to adjust airflow to your hardware and desired noise level. Spacious interior for your gaming PC The case supports ATX, Micro-ATX, and Mini-ITX motherboards as well as current graphics cards, powerful processors, and full-sized power supplies. Separate slots for SSDs and HDDs provide space for games, programs, and personal data. Cable routing holes and mounting points help you manage cables behind the motherboard tray, keeping the visible area tidy.
SilverStone SST-CS240 is a compact Mini-ITX case designed specifically for building efficient NAS systems, servers and mass storage. Despite its compact design, it offers exceptionally large storage capacity and impresses with its well-thought-out design for professional and private use. There are four hot-swap 2.5-inch drive bays on the front, supporting U.2 NVMe, SAS, and SATA drives. This allows you to quickly and easily replace drives without having to open the case. This feature makes the CS240 particularly interesting for home servers, virtualization environments, backup solutions and other storage-intensive application areas. In addition to great flexibility in drive configuration, the case offers enough space for powerful hardware. Supports Mini-ITX motherboards, SFX and SFX-L power supplies, CPU coolers up to 182 mm high, and graphics cards up to 300 mm long. Two pre-installed 120 mm fans ensure efficient airflow and contribute to reliable cooling of all components. The high-quality aluminum front gives the SilverStone SST-CS240 a modern and professional look. The lockable front flap protects the hot-swap sockets against unauthorized access and completes the well-thought-out security concept. With a combination of compact dimensions, high storage density and comprehensive hardware compatibility, the SilverStone SST-CS240 is ideal for high-performance NAS systems, home servers and professional storage solutions where reliability, flexibility and efficient use of space are a priority. Tower type Color black EAN 4710679819754 Manufacturer no. SST-CS240 Tower design server Mini-ITX format motherboard Material: aluminum entrance door, plastic front panel, steel Internal dimensions Plug-in card length maximum 300 mm Internal dimensions Processor cooling height maximum 182 mm Internal dimensions Power supply shape SFX Internal dimensions Power supply length maximum 140 mm Internal bays for 3.5-inch drives Internal bays for 2.5-inch drives Internal bays for 2.5-inch 3.5-inch drives Full-size slots 2 pieces Front connectors 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 2.0 (480 Mbit/s) The USB 3.2 Gen 1 designation corresponds to the existing USB 3.1 Gen 1 / USB 3.0 designation. 1 x 120 mm black fan pre-installed at the front 1 x 120 mm fan can be installed at the back Notes page: 2 x 120 mm black fans pre-installed, alternatively 3 80 mm fans can be installed Rear motherboard connection no. Function Supports 4 hot-swappable 2.5" U.2 NVMe / SAS / SATA Tri-Mode SSDs More information SlimSAS 8i backplane, PCIe 4.0 support Note Drive support External: 4 2.5" NVMe U.2 (SFF-8639) / SAS / SATA SSDs (thickness) 15 mm), replaceable during operation Volume 22 l Dimensions Width: 21.1 cm x Height: 28.5 cm x Depth/Length: 36 cm
The SilverStone RM4A 4U Rackmount Chassis sets new standards in flexibility for workstation and server configurations, offering support for everything from compact Mini-ITX boards to full-size SSI-EEB motherboards. With eight full-height expansion slots and a removable expansion card bracket, it's built to easily accommodate high-performance components - no sagging, no strain, just solid support for multi-GPU setups or demanding expansion needs. Excellent temperature control is the strength of the RM4A. The front panel offers space for a 360 mm radiator, enabling the use of highly efficient liquid cooling systems for CPUs or GPUs. Complemented by two 80 mm fans on the back, the case offers a consistent airflow to all important components, ensuring reliable cooling even under continuous load. Rack type, server enclosure Color black EAN 4710679819501 Manufacturer no. SST-RM4A Made in China Rack design Mainboard form factor ATX, E-ATX, µATX, Mini-ITX, SSI-CEB, SSI-EEB Material steel Internal dimensions Plug-in card length maximum 424 mm Internal dimensions CPU cooler height maximum 148 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 255 mm Internal dimensions height units 4 U Drive bays 3.5 inches internal Drive bays 2.5 inches internal Drive bays 2.5 in 3.5 inches internal Slots full size 8 pieces Front ports 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 2.0 (480 Mbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. Front 3 x 120 mm fans can be installed, or a 360 mm radiator 2 x 80 mm fans can be installed on the back Water cooling possible Yes Water cooling possible. Supported radiators front: 360 mm Rear connection of the mainboard No Volume 35 l Dimensions Width: 44 cm x Height: 17.6 cm x Depth/Length: 44.6 cm Weight 7.6kg
With the Jonsbo TK-5, your gaming setup becomes a real eye-catcher. Thanks to the open design, you have a full view of your installed hardware. Black mid-tower with panoramic glass design Numerous fan and radiator mounts for effective cooling performance Supports motherboards up to ATX Space for graphics cards up to 460 mm and CPU coolers with a height of up to 180 mm Jonsbo TK-5: PC case with panoramic design The Jonsbo TK-5 mid-tower offers the perfect balance between size and functionality. With ample space for powerful hardware and efficient cooling, it is the ideal choice for gaming builds. Extensive cooling options with fans and radiators To keep your hardware cool under any load, up to ten fans can be installed in the Jonsbo TK-5 at the same time. The case provides space on the top and bottom for three 120 or 140 mm fans each. On the side, you can install three 120 mm fans, and one at the rear. An AiO liquid cooler can also be installed without any problems if you prefer to cool your powerful hardware with water cooling. There is space on the top and bottom for a 360 mm water cooling system. Installing your hardware The case offers enough space for powerful gaming hardware. It supports the installation of long graphics cards up to 460 mm. The CPU cooler should not exceed a height of 180 mm. A total of eight drives can be installed to store programs and games.
Supermicro Chassis Features:- System Level Optimized Solutions- Full Range of Rackmount, Workstation & Tower Chassis - mini-1U, 1U, 2U, 3U & 4U- Up to Platinum Level (95%+) High-Efficiency Power Supplies- High Availability, Adaptability, Scalability and Reliability- Outstanding Price/Performance Ratio- Highest Quality Components, Fans & Power Supplies- 100% Cooling Redundancy for System Reliability- Hot-Swappable Redundant Power Supplies, Fans and Drive Trays- Maximum Storage CapacityThese design advantages have helped Supermicro rapidly establish its reputation as a leader in chassis design. To see the future of chassis designs now, check out our latest chassis solutions. Optimized for the latest x86 processors, these state-of-the-art chassis are equipped with hot-plug heavy-duty fans, fan speed controls and revolutionary air-shroud designs for 100% airflow redundancy.Toetatud protsessorite arv1Toetatud mälutüübidDDR4-SDRAMToetatud kõvaketaste arv7Kujutegur1UToiteallikas200 WKasutamistemperatuur (T-T)0 - 40 °CHoiustamistemperatuur (T-T)-40 - 70 °CSuhteline õhuniiskus kasutamisel (H-H)8 - 90 protsentiSuhteline õhuniiskus (H-H) hoiustamisel5 - 95 protsentiLaius437 mmSügavus249 mmKõrgus43 mmKaal4,5 kg
Wall-mountable showcase case, ATX form factor, designed for custom water cooling, vertical GPU mounting, radiator up to 360 mm, graphics cards up to 400 mm in length.
White midi-tower case, with side panel and front made of tempered glass, excellent airflow, space for radiators up to 360 mm, 3x 120-mm fans pre-installed, D-RGB lighting including controller, support for motherboards with rear connections.
Mini-ITX case as well as M-ATX case in gray, for motherboards in Mini-ITX or M-ATX format, eight different installation options, external IO hub, mesh grid for improved airflow, up to seven 120 mm fans, and two simultaneous 360 mm radiators.
