Black case with a closed side Efficient cooling with up to seven fans and a radiator up to 360mm Support for large motherboards up to E-ATX and back-connect Space for graphics cards up to 415mm and CPU coolers with a height of up to 184mm Up to six drives possible Three M25-120mm fans already included PHANTEKS XT Silent: Compact and simple midi-tower The PHANTEKS XT Silent fits into any setup with its simple black design. It offers extensive options for installing your high-end hardware. To keep your system cool even at full power, there is plenty of space for fans and radiators. Effectively cooled with fans and radiators To ensure your high-end components do not overheat even under full load, up to seven fans can be installed in the midi-tower. The top supports either up to three 120mm or two 140mm fans. Additionally, three more 120mm fans can be installed on the mid-plate. The rear also allows for a 120mm or 140mm fan. Furthermore, three PHANTEKS M25-120mm fans are already included in the package. If you prefer water cooling - whether an all-in-one water cooling system or a custom-built water cooling solution - there are two locations to install a radiator. A maximum 360mm radiator can be mounted at the top, and another 120mm radiator at the rear. With these fan and radiator options, your system will not lose performance. Hardware installation The midi-tower supports the installation of large graphics cards up to 415mm in size. Consequently, the current NVIDIA GPUs of the 40 series are also possible. Motherboards up to E-ATX format can be accommodated. To avoid messy cable clutter, you can also install motherboards with back-connect. The CPU cooler should not exceed a height of 184mm. On the other hand, there are hardly any limits for the power supply, as it can be up to 270mm long. To store programs and games, up to six drives can be installed: up to three 2.5-inch SSDs can be placed on the side, two more in the power supply chamber, as well as one 3.5-inch drive.
Obudowa do konstruowania wydajnych komputerów mid tower iCUE LINK 5000T LX RGB Przyciągnij uwagę za pomocą wyjątkowej profilowanej konstrukcji obudowy CORSAIR 5000T LX RGB, w której możesz zbudować idealny system oparty na płycie głównej z odwróconymi złączami. Elegancka stalowa obudowa o wyjątkowym kształcie 3 wentylatory LX120 RGB i koncentrator systemowy iCUE LINK w komplecie Zintegrowane taśmy świetlne RGB Aurora zapewniające rozproszone oświetlenie Działa z płytami głównymi z odwróconymi złączami Zdejmowane panele przedni i górny z siateczki umożliwiające intensywny obieg powietrza Mieści do 10 wentylatorów 120 mm lub 4 wentylatorów 140 mm oraz kilka radiatorów 360 mm System organizacji okablowania RapidRoute EFEKTOWNE LINIETa elegancka obudowa o wyjątkowym kształcie z taśmami świetlnymi iCUE LINK Aurora i wentylatorami iCUE LINK LX120 RGB zapewnia wyraziste i dynamiczne podświetlenie pozwalające podziwiać jej uderzające piękno. OGROMNY POTENCJAŁ CHŁODZENIAPrzestronne wnętrze pomieści nawet 10 wentylatorów 120 mm albo 4 wentylatory 140 mm, a także kilka radiatorów o wysokości 60 mm, w tym z przodu lub boku - o rozmiarze 360 mm oraz w górnej części - o rozmiarze 360 mm w konfiguracji push/pull. PEŁNA FUNKCJONALNOŚĆTa obudowa ma wszystko, czego potrzeba do budowy bardzo wydajnego komputera. ZDEJMOWANE PANELE PRZEDNI I GÓRNYSiateczkowe panele o wyjątkowej konstrukcji, które można łatwo zdjąć, aby dostać się do środka, umożliwiają intensywny przepływ powietrza. DWA OBSŁUGIWANE BEZNARZĘDZIOWO PANELE BOCZNE NA ZAWIASACHŁatwy dostęp do systemu dzięki panelom na zawiasach: jednemu ze szkła hartowanego, eksponującemu wszystkie komponenty, oraz jednemu ze stali z drugiej strony. SYSTEM PROWADZENIA PRZEWODÓW CORSAIR RAPIDROUTEUmożliwia szybkie i łatwe poprowadzenie przewodów przez obszerny 46-milimetrowy ukryty kanał pod płytą główną. OBSŁUGA PŁYT GŁÓWNYCH Z ODWROTNYMI ZŁĄCZAMISprawdzona pod kątem zgodności z płytami głównymi ASUS BTF, MSI Project Zero oraz Gigabyte Project Stealth, które mają złącza z tyłu, dzięki czemu nie psują widoku przez podłączone kable. PROSTA KONSTRUKCJANowoczesna konstrukcja w popularnym formacie obudowy komputerowej 5000T ma wygodne rozwiązania, które ułatwią Ci pracę. PUDEŁKO NA ŚRUBY WIELOKROTNEGO UŻYTKUDzięki dodanemu w zestawie pudełku, w którym wszystkie potrzebne Ci śruby będą bezpiecznie zamknięte, nie zgubisz już żadnej ważnej śrubki. PRZELOTKI FORMOWANE W DWÓCH CYKLACHDzięki miękkim, gumowym przelotkom wewnętrznym umożliwiającym łatwe przeciąganie kabli oraz twardym gumowym przelotkom zewnętrznym, które pewnie trzymają się na miejscu, możesz uniknąć frustracji podczas instalowania przewodów. ŚRUBY QUICKTURN DO WENTYLATORÓWŚruby do wentylatorów CORSAIR QuikTurn są równie wytrzymałe i bezpieczne jak tradycyjne śruby, dzięki czemu montaż wentylatorów w systemie staje się niezwykle prosty. Przydaje się to, gdy wypełniasz obudowę tej wielkości. WIELE MOŻLIWOŚCI CHŁODZENIAStwórz odpowiedni do swoich potrzeb system chłodzenia dzięki miejscu na 10 wentylatorów 120 mm oraz różnorodnym opcjom montażu dwóch radiatorów o maksymalnym rozmiarze 360 mm. NOWOCZESNY PANEL WEJŚĆ/WYJŚĆ Z PRZODUUmożliwia łatwy dostęp do nowoczesnych złączy, w tym do portu USB 3.2 Gen 2 Type-C, 4 portów USB 3.2 Gen 1 Type-A oraz zintegrowanego gniazda audio i mikrofonowego typu jack.
The ASUS ProArt PA401 mid-tower chassis presents a unique wood edition design that combines aesthetics with functionality. With a robust open frame design and a windowed side panel made from tempered glass, this chassis allows for a clear view of the internal components while maintaining airflow. Equipped with integrated cable management, this chassis provides a clean and organized build space, making installation and maintenance straightforward.This chassis boasts numerous features that enhance performance and usability. It includes multiple dust filters to keep the interior clean, a PWM controller for efficient cooling, and ample space for expansion with 4 internal bays and 7 expansion slots. Supporting a variety of radiator sizes and up to 2 x 140 mm fans, the cooling system maintains optimal temperatures while ensuring quiet operation. Additionally, front panel connectors include USB and audio ports for easy access to peripherals.
The Montech X5 is a mid-tower case that combines elegant design with solid cooling performance. With a sleek front panel, tempered glass side window, and pre-installed fans, it's the ideal choice for budget-conscious PC setups. Modern mesh front panel with a clean, minimalist look Three 140mm and one 120mm fans pre-installed for instant cooling Tempered glass side window for an unobstructed view of the interior Compatible with E-ATX motherboards and GPUs up to 410 mm in length Spacious interior with tidy cable management Elegant design for any setup Enjoy high compatibility in a compact build with the Montech X5 Mid-Tower. It accommodates large GPUs, powerful cooling systems, and modern cable management—without appearing bulky. The X5 uses a simple front panel without mesh, delivering a clean overall appearance. It's especially suitable for users who value a clear, minimalist look. This case combines performance with style—the RGB lighting delivers an impressive appearance and enhances your entire setup. Whether for a gaming rig or workstation, customizable effects make your PC a real eye-catcher. Solid cooling performance with four fans Keep your components at optimal temperature with the Montech X5, the perfect choice for those who prioritize high-performance cooling. Its airflow-friendly design and optimized airflow architecture ensure ideal cooling, even during long gaming sessions or heavy system loads—a case that perfectly combines performance and cooling. Despite the closed front, four 120mm fans are already installed, providing good basic cooling right out of the box. This means you're ready to go without additional investment. Thanks to the removable dust filters, your case stays free from dust build-up. The filters are easy to clean, so your computer remains optimally cooled at all times. Easy assembly & flexible hardware support The interior offers space for standard ATX motherboards, long graphics cards, and multiple drives. Thanks to its thoughtful structure, installation is quick and straightforward, even for beginners.
The Montech X5 is a mid-tower case that combines elegant design with solid cooling performance. Featuring a clean front panel, tempered glass side window, and pre-installed fans, it is the ideal choice for budget-conscious PC setups. Modern mesh front panel with a clear, minimalist look Three 140mm and one 120mm pre-installed fans for immediate cooling Tempered glass side window for a clear view of the interior Compatible with E-ATX motherboards and GPUs up to 410mm in length Spacious interior with clean cable management Elegant design for any setup Enjoy high compatibility in a compact form factor with the Montech X5 mid-tower. It offers space for large GPUs, powerful cooling systems, and modern cable management—without appearing bulky. The X5 features a simple front without mesh that creates a tidy overall appearance. It is especially suited for users who value a clear, minimalist aesthetic. This case combines performance with style—the RGB lighting creates an impressive look and elevates your entire setup. Whether it’s a gaming rig or a workstation, with individually adjustable effects your PC becomes a real eye-catcher. Solid cooling performance with four fans Keep your components at optimal temperatures with the Montech X5, the perfect choice for those who value high-performance cooling. Its air-permeable design and optimized airflow architecture ensure ideal cooling, even during long gaming sessions or under heavy system loads—a case that perfectly combines performance and cooling. Despite the closed front panel, four 120mm fans are already installed to provide good base cooling. This means you’re ready to go without any additional investment. Thanks to the removable dust filters, your case remains free from dust deposits. The filters are easy to clean, ensuring your computer always stays optimally cooled. Easy assembly & flexible hardware support The interior offers space for standard ATX motherboards, long graphics cards, and multiple drives. Thanks to the well-thought-out structure, installation is quick and straightforward, even for beginners.
ASUS ROG Strix Helios II. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Frontventiler installeret: 3x 140 mm, Understøttede diametre for frontventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 250 mm, Dybde: 565 mm, Højde: 591 mm
Midi tower in black, supports up to eight fans, space for radiators up to 360mm, motherboards up to ATX, GPU up to 405mm, and CPU cooler up to 175mm in height, supports up to three drives The Antec P30 AIR PC case has been specifically designed for premium airflow, ensuring efficient cooling of your components. Thanks to the well-thought-out mesh panels and optimised air circulation, your PC system stays cool and performs reliably even under heavy load. Black mid-tower with built-in fans Effective cooling performance thanks to eight fan slots and radiators up to 360mm Supports motherboards up to ATX size Space for graphics cards up to 405mm and CPU coolers up to 175mm in height Antec P30 AIR: PC case with built-in fans The Antec P30 AIR mid-tower offers the perfect balance between size and functionality. With ample room for powerful hardware and efficient cooling, it is the ideal choice for gaming and workstation builds. Extensive cooling options with fans and radiators To keep your hardware cool under any load, the Antec P30 AIR can accommodate up to eight fans simultaneously. The top supports three 120mm or two 140mm fans. At the front, two 120mm or 140mm fans can be installed, while above the power supply cover there is space for two additional 120mm fans. A 120mm fan can also be mounted at the rear. An AiO water cooling system can also be easily installed if you prefer to cool your powerful hardware with liquid cooling. There is space for this at the top (up to 360mm), at the front (240mm), and at the rear (up to 120mm). Installing your hardware The case offers enough space for powerful gaming hardware. It supports graphics cards up to 405mm in length. Motherboards up to ATX format are supported. The CPU cooler should not exceed a height of 175mm. To store programmes and games, a total of three drives can be installed.
Das CG330 3F verfügt über ein rahmenloses Seitenfenster mit Vollbildfunktion, das trotz kompakter Abmessungen eine hervorragende Sicht ermöglicht. Die Unterstützung für Mainboards mit umgekehrtem Anschluss sorgt für eine unsichtbare Kabelführung und ein aufgeräumtes, elegantes Erscheinungsbild. Beginnen Sie mit einem sauberen Systemaufbau und einem Zweikammer-Layout, das Stromversorgungs- und Speicherkomponenten vom Hauptluftstrom trennt. Dies verbessert die Kühlleistung und nutzt den Innenraum besser aus. Das CG330 3F ist mit zwei seitlich angebrachten FL-Lüftern mit umgekehrten Lüfterblättern und einem Standardlüfter an der Rückseite ausgestattet. Diese bilden einen horizontalen Luftstromkanal, der für effektive Kühlung sorgt. Das einzigartige Beleuchtungsdesign von DeepCool verleiht Ihrem System eine gleichmäßige Ausleuchtung. Das kompakte und dennoch vielseitige CG330 3F unterstützt Grafikkarten bis zu 410 mm, ATX-Netzteile bis zu 200 mm und CPU-Kühler bis zu 164 mm. Mit 5 PCIe-Steckplätzen bietet es Platz für die meisten modernen Grafikkarten und Erweiterungskarten. Die Speicheroptionen umfassen bis zu 2 × 3,5"-HDDs und 4 × 2,5"-SSDs, sodass Sie Kapazität und Geschwindigkeit optimal ausbalancieren können.
PMC-SE2Gaming Mini TowerDiscover the perfect balance between design and functionality with the MicroArtx MC-SE2. Featuring continuous, frameless tempered glass panels on the front and sides, this computer case transforms your workstation into a stylish display of your hardware. A 120mm FRGB rear fan, dual-chamber design with support for liquid cooling kits, and an optimized Airflow Mesh ventilation system ensure exceptional thermal efficiency during gaming sessions.
Das View 270 Plus WS ARGB ist mit Hartglasplatten an der Vorder- und Seite des Gehäuses ausgestattet, um optimale Betrachtungswinkel für Ihr System im Inneren zu bieten. Das Gehäuse unterstützt Radiatoren von bis zu 360 mm auf der Oberseite des Gehäuses und kann den Kühldedarf einiger der anspruchsvolleren Systeme decken, während es gleichzeitig ein ansprechendes Erscheinungsbild beibehält, um Ihre Komponenten zur Geltung zu bringen. Das View 270 wird mit drei 120-mm-ARGB-Lite-Lüftern geliefert, von denen zwei seitlich angebracht sind, und ein weiterer an der Rückseite des Gehäuses, um eine Luftabfuhr zu bieten. Daisy-Chain Verbindungen vereinfachen die Verkabelung und die Beleuchtung kann über die Motherboard-Software von Asus, Gigabyte, MSI und ASRock gesteuert werden. Das View 270TG Plus kann bis zu zwei 2,5Zoll-SSDs oder zwei 3,5-Zoll-HDDs unterstützen, an jeweils einem dedizierten Speicherort und jeweils einem gemeinsam genutzten Speicherort. Zwei USB 3.0-Anschlüsse, ein USB 3.2 Gen 2 Typ C und HD-Audio Anschlüsse sind auf der Oberseite angebracht, um bei Bedarf direkten Zugriff zu ermöglichen.
Das MasterFrame 600 Mesh ist ein hochwertiges Midi-Tower-Gehäuse mit offenem Rahmen für leistungsstarke Hardware, extreme Kühlung und umfassende Anpassungsmöglichkeiten. Es wurde mit Blick auf FreeForm 2.0 entwickelt, unterstützt ATX- bis E-ATX-Motherboards und bietet vollen Zugriff auf modulare Designdateien, sodass Benutzer unbegrenzt bauen und weiterentwickeln können. Das Gehäuse verfügt Platz für bis zu zehn Lüfter und mehrere Radiatorgrößen (bis zu 420 mm) und bietet so eine überragende Wärmeleistung. Die mitgelieferte GPU-Halterung verhindert ein Durchhängen der GPU und sorgt für Stabilität bei intensiven Spielen oder Hochleistungs-Workloads, wodurch eine saubere und sichere Konstruktion geboten wird.
Das MasterFrame 500 Mesh ist ein hochwertiges Midi-Tower-Gehäuse mit offenem Rahmen für leistungsstarke Komponenten, fortschrittliche Kühlung und grenzenlose Anpassungsmöglichkeiten. Es basiert auf der FreeForm 2.0-Designphilosophie, unterstützt ATX- bis E-ATX-Motherboards und bietet vollen Zugriff auf modulare Designdateien. Dank verbesserter Mesh-Panels für eine verbesserte Luftzirkulation können PC-Builder, Modder und Entwickler die Grenzen des PC-Designs erweitern. Das Gehäuse verfügt Platz für bis zu acht Lüfter und mehrere Radiatorgrößen (bis zu 360 mm) und bietet so eine überragende Wärmeleistung. Die mitgelieferte GPU-Halterung verhindert ein Durchhängen der GPU und sorgt für Stabilität bei intensiven Spielen oder Hochleistungs-Workloads, wodurch eine saubere und sichere Konstruktion geboten wird.
Das MasterFrame 600 Mesh ist ein hochwertiges Midi-Tower-Gehäuse mit offenem Rahmen für leistungsstarke Hardware, extreme Kühlung und umfassende Anpassungsmöglichkeiten. Es wurde mit Blick auf FreeForm 2.0 entwickelt, unterstützt ATX- bis E-ATX-Motherboards und bietet vollen Zugriff auf modulare Designdateien, sodass Benutzer unbegrenzt bauen und weiterentwickeln können. Das Gehäuse verfügt Platz für bis zu zehn Lüfter und mehrere Radiatorgrößen (bis zu 420 mm) und bietet so eine überragende Wärmeleistung. Die mitgelieferte GPU-Halterung verhindert ein Durchhängen der GPU und sorgt für Stabilität bei intensiven Spielen oder Hochleistungs-Workloads, wodurch eine saubere und sichere Konstruktion geboten wird.
Das Elite 600 ist ein ATX-Mid-Tower-Gehäuse für Systembauer, die Wert auf Leistung und Stil legen. Mit einem Seitenteil aus gehärtetem Glas und einem schlanken, modernen Design bietet es beeindruckendes Kühlpotenzial und unterstützt bis zu 360-mm-Radiatoren für eine effiziente Luftzirkulation. Das Gehäuse verfügt über einen USB 3.2 Gen 2x2 Typ-C Anschluss für schnelle Konnektivität und bietet reichlich Speicheroptionen, darunter Platz für eine 3,5-Zoll-Festplatte, ein 2,5-Zoll/3,5-Zoll-Laufwerk und zwei 2,5-Zoll-SSDs. Es ist für GPUs in voller Größe bis zu 425 mm ausgelegt und bietet Platz für anspruchsvolle Hardware und gleichzeitig eine klare, funktionale Ästhetik für jeden Systemaufbau.
The Define One by Fractal Design is a PC case with a closed front panel that combines clear Scandinavian design with effective sound insulation. It features aluminum side air intakes, subtle curves, and high-quality details for a refined look that delivers timeless and functional design. It supports modern high-end components and comes with three powerful Momentum fans at the front. It offers space for graphics cards up to 368 mm long, supports radiators up to 360 mm at the front and 280 mm on the top, and is compatible with motherboards with rear-mounted connections. Thanks to removable brackets and sophisticated cable routing, the Define One provides a smooth and intuitive building experience. Even powerful gaming systems have plenty of room here and stay quiet under load thanks to the integrated sound insulation. The integrated front air guide directs cool air directly to the graphics card.TypeTower caseColorwhiteEAN7340172713401Manufacturer No.FD-C-DEFOA-03SeriesDefine OneForm factorMid TowerMotherboard form factorE-ATXMaterialSteel, aluminumWindow KitYesInternal dimensions (expansion card length)up to 368 mmInternal dimensions (CPU cooler height)up to 171 mmInternal dimensions (PSU form factor)ATXInternal dimensions (PSU length)up to 180 mmInternal drive bays 3.5 inch2 piecesInternal drive bays 2.5 inch2 piecesInternal drive bays 2.5 inch (2.5 in 3.5 inch bays)2 piecesFull-size slots7 piecesFront ports1x Audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s)Front portsThe USB 3.2 Gen 1 designation corresponds to the former name USB 3.1 Gen 1 / USB 3.0.Front portsThe USB 3.2 Gen 2 designation corresponds to the former name USB 3.1 Gen 2 / USB 3.1.FrontIncludes 3x Momentum 140 mm PWM fans; alternatively, 3x 120 mm fans can be installedRear1x 120 mm can be installedNotesDust filters: front, PSU; sound-damping material on the right side panelWater cooling possibleYesWater cooling possible (supported radiators)Front: up to 360 mm, Top: up to 280 mm, Rear: 120 mmRear-mounted motherboard connectionYesSound-damped caseYesAdditional informationMaximum graphics card lengths: 368 mm with the built-in front fan, 338 mm when installing a 30 mm thick radiator | E-ATX format supported up to a size of 277 mm | A motherboard with rear-mounted connections is supported up to the ATX formatVolume57 lDimensionsWidth: 23.5 cm x Height: 50 cm x Depth/Length: 48.2 cmWeight11.1 kg
The Define One by Fractal Design is a PC case with a closed front panel that combines clear Scandinavian design with effective sound insulation. It features side air intakes made of aluminum, subtle curves, and high-quality details for a refined look that delivers timeless and functional design. It supports modern high-end components and comes with three powerful Momentum fans at the front. It offers space for graphics cards up to 368 mm in length, supports radiators up to 360 mm at the front and 280 mm at the top, and is compatible with motherboards with rear-mounted connectors. Thanks to removable brackets and a sophisticated cable routing system, the Define One provides a smooth and intuitive building experience. Powerful gaming systems also have plenty of room here and stay quiet even under load thanks to the integrated sound insulation. The integrated front airflow directs cool air directly to the graphics card.TypeTower caseColorwhiteEAN7340172714736Manufacturer No.FD-C-DEFOA-04SeriesDefine OneForm factorMid-TowerMotherboard Form FactorE-ATXMaterialSteel, aluminumInternal dimensions (graphics card length)up to 368 mmInternal dimensions (CPU cooler height)up to 171 mmInternal dimensions (PSU form factor)ATXInternal dimensions (PSU length)up to 180 mmDrive bays 3.5-inch internal2 piecesDrive bays 2.5-inch internal2 piecesDrive bays 2.5-inch (2.5 in 3.5-inch) internal2 piecesFull-size slots7 piecesFront ports1x Audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s)Front portsThe label USB 3.2 Gen 1 corresponds to the previous label USB 3.1 Gen 1 / USB 3.0.Front portsThe label USB 3.2 Gen 2 corresponds to the previous label USB 3.1 Gen 2 / USB 3.1.FrontIncludes 3x Momentum 140 mm PWM fans; alternatively, 3x 120 mm fans can be installedRear1x 120 mm can be installedNotesDust filters: front, PSU; sound-damping materials on the side panelsWater cooling possibleYesWater cooling possible (supported radiators)Front: up to 360 mm, Top: up to 280 mm, Rear: 120 mmRear-mounted motherboard connectorsYesSound-dampened caseYesFurther informationMaximum graphics card lengths: 368 mm with the built-in front fan, 338 mm when installing a 30 mm-thick radiator | E-ATX format supported up to a size of 277 mm | A motherboard with rear-mounted connectors can be installed up to the ATX formatVolume57 lDimensionsWidth: 23.5 cm x Height: 50 cm x Depth/Length: 48.2 cmWeight11.3 kg
The Summit PC case by Fractal Design combines expressive Scandinavian design with strong gaming performance. It features curved wood details, matching solid wood feet, and refined details for a distinctive look inspired by Scandinavian furniture. The Summit was designed for modern high-end components and comes with three Momentum 140 mm fans pre-installed in the front, support for graphics cards up to 425 mm long, radiator support up to 360 mm at the front and top, and compatibility with motherboards with rear connections. A modern interior with removable brackets and integrated cable routing ensures smooth installation and a clean, tidy result.TypeTower caseColorwhite/woodEAN7340172712695Manufacturer No.FD-C-SUM1A-02SeriesSummitForm factorMid-TowerMainboard form factorE-ATXMaterialSteelWindow KitYesInternal dimensions for expansion card lengthup to 425 mmInternal dimensions for CPU cooler heightup to 173 mmInternal dimensions for PSU form factorATXInternal dimensions for PSU lengthup to 253 mmInternal drive bays 3.5 inch2 piecesInternal drive bays 2.5 inch2 piecesInternal drive bays 2.5 inch (2.5 in 3.5 inch bays)2 piecesFull-size slots7 piecesFront ports1x Audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s)Front portsThe USB 3.2 Gen 1 label corresponds to the previous naming USB 3.1 Gen 1 / USB 3.0.Front portsThe USB 3.2 Gen 2 label corresponds to the previous naming USB 3.1 Gen 2 / USB 3.1.Front3x Momentum 140 mm PWM fans included; alternatively, 3x 120 mm fans can be installedRear1x 120 mm fan mountableNotesDust filter: PSULiquid cooling possibleYesLiquid cooling possible Supported radiatorsFront: up to 280/360 mm, Top: up to 280/360 mm, Rear: 120 mmRear connection of the mainboardYesFurther informationMaximum expansion card lengths: 425 mm with the built-in front fan, 393 mm when installing a 30 mm thick radiator | E-ATX format supported up to a size of 277 mm | A mainboard with rear connections can be installed up to the ATX formatVolume58 lDimensionsWidth: 22.9 cm x Height: 51.5 cm x Depth/Length: 49.5 cmWeight10.1 kg
The Fractal Design Summit PC case combines expressive Scandinavian design with strong gaming performance. It features curved wood details, matching solid-wood feet, and refined details for a distinctive look inspired by Scandinavian furniture. The Summit was developed for modern high-end components and comes with three Momentum 140 mm fans already installed in the front, support for graphics cards up to 425 mm long, radiator support up to 360 mm at the front and top, and compatibility with motherboards with rear connections. A modern interior with removable brackets and integrated cable routing ensures a smooth build process and a clean, tidy result.TypeTower caseColorblack/woodEAN7340172712701Manufacturer No.FD-C-SUM1A-03SeriesSummitForm factorMid-TowerMotherboard form factorE-ATXMaterialSteelInternal dimensions - expansion card lengthup to 425 mmInternal dimensions - CPU cooler heightup to 173 mmInternal dimensions - PSU form factorATXInternal dimensions - PSU lengthup to 253 mmInternal drive bays 3.5 inch2 piecesInternal drive bays 2.5 inch2 piecesInternal drive bays 2.5 inch (2.5 in 3.5 inch bays)2 piecesFull-size slots7 piecesFront ports1x Audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s)Front portsThe label USB 3.2 Gen 1 corresponds to the former label USB 3.1 Gen 1 / USB 3.0.Front portsThe label USB 3.2 Gen 2 corresponds to the former label USB 3.1 Gen 2 / USB 3.1.Front3x Momentum 140 mm PWM fans included; alternatively, 3x 120 mm fans can be installedRear1x 120 mm fan mountableNotesDust filter: PSUWater cooling possibleYesWater cooling possible - supported radiatorsFront: up to 280/360 mm, Top: up to 280/360 mm, Rear: 120 mmRear connection of the motherboardYesFurther informationMaximum expansion card lengths: 425 mm with the installed front fan, 393 mm when installing a 30 mm thick radiator | E-ATX format supported up to a size of 277 mm | Installing a motherboard with rear connections is possible up to the ATX formatVolume58 lDimensionsWidth: 22.9 cm x Height: 51.5 cm x Depth/Length: 49.5 cmWeight9.9 kg
The Summit PC case by Fractal Design combines expressive Scandinavian design with strong gaming performance. It features curved wood details, matching solid-wood feet, and refined accents for a distinctive look inspired by Scandinavian furniture. The Summit has been developed for modern high-end components and comes with three Momentum 140 mm fans pre-installed in the front. It supports graphics cards up to 425 mm in length, radiator support up to 360 mm at the front and top, and compatibility with motherboards with rear connectors. A modern interior with removable brackets and integrated cable routing ensures a smooth build process and a clean, tidy result.TypeTower caseColorblack/woodEAN7340172712718Manufacturer No.FD-C-SUM1A-04SeriesSummitForm factorMidi-TowerMotherboard form factorE-ATXMaterialSteelWindow KitYesInternal dimensions (expansion card length)up to 425 mmInternal dimensions (CPU cooler height)up to 173 mmInternal dimensions (PSU form factor)ATXInternal dimensions (PSU length)up to 253 mmDrive bays 3.5-inch internal2 pcsDrive bays 2.5-inch internal2 pcsDrive bays 2.5-inch (2.5 in 3.5-inch) internal2 pcsFull-size slots7 pcsFront ports1x Audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s)Front portsThe label USB 3.2 Gen 1 corresponds to the previous label USB 3.1 Gen 1 / USB 3.0.Front portsThe label USB 3.2 Gen 2 corresponds to the previous label USB 3.1 Gen 2 / USB 3.1.Front3x Momentum 140 mm PWM fans included; alternatively 3x 120 mm fans can be installedRear1x 120 mm fan mountNotesDust filters: PSUWater cooling possibleYesWater cooling possible Supported radiatorsFront: up to 280/360 mm, Top: up to 280/360 mm, Rear: 120 mmRear connector for the motherboardYesAdditional informationMaximum expansion card lengths: 425 mm with the built-in front fan, 393 mm when installing a 30 mm thick radiator | E-ATX format supported up to a size of 277 mm | Installing a motherboard with rear connectors is possible up to the ATX formatVolume58 lDimensionsWidth: 22.9 cm x Height: 51.5 cm x Depth/Length: 49.5 cmWeight10.1 kg
The Summit PC case from Fractal Design combines striking Scandinavian design with strong gaming performance. It features curved wood details, matching solid wood feet, and refined accents for a distinctive look inspired by Scandinavian furniture. The Summit was designed for modern high-end components and comes with three Momentum 140 mm fans already installed in the front, supports graphics cards up to 425 mm in length, supports radiator sizes up to 360 mm at the front and top, and is compatible with motherboards with rear-side connections. A modern interior with removable brackets and integrated cable routing ensures a smooth build and a clean, tidy result. The Ambience version also offers customizable ARGB lighting on the front during operation.TypeTower caseColorblackEAN7340172712732Manufacturer No.FD-C-SUM1A-06SeriesSummitForm factorMid-TowerMotherboard form factorE-ATXMaterialSteelWindow KitYesInternal dimensions GPU lengthup to 425 mmInternal dimensions CPU cooler heightup to 173 mmInternal dimensions PSU form factorATXInternal dimensions PSU lengthup to 253 mmDrive bays 3.5-inch internal2 piecesDrive bays 2.5-inch internal2 piecesDrive bays 2.5-inch (2.5 in 3.5-inch) internal2 piecesFull-size slots7 piecesFront ports1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s)Front portsThe USB 3.2 Gen 1 designation corresponds to the previous name USB 3.1 Gen 1 / USB 3.0.Front portsThe USB 3.2 Gen 2 designation corresponds to the previous name USB 3.1 Gen 2 / USB 3.1.FrontIncludes 3x Momentum 140 mm PWM fans; alternatively, 3x 120 mm fans can be installedRear1x 120 mm fan can be installedNotesDust filters: PSULightingYes, RGBWater cooling possibleYesWater cooling possible Supported radiatorsFront: up to 280/360 mm, Top: up to 280/360 mm, Rear: 120 mmRear-side motherboard connectionYesAdditional informationMaximum graphics card lengths: 425 mm with the installed front fan, 393 mm when installing a 30 mm thick radiator | E-ATX format supported up to a size of 277 mm | Installation of a motherboard with rear-side connectors possible up to the ATX formatVolume58 lDimensionsWidth: 22.9 cm x Height: 51.5 cm x Depth/Length: 49.5 cmWeight10.1 kg
Cabinet Form Factor: Midi Torn Mainboard Form Factor1Supported Mainboard Form Factor: ATXMicro ATX 3.5-inch Internal Drivesahtleid1(3.5-mm minijack) Headphones: 1(3.5-mm minijack) External värv: must Package Type1kg Pack kaal Netto (kg): 2.8 kg Pieces in pack1Box kaal Brutto (kg): 3.61kg Retail Packaging Netokaal Carton: 0.5 kg Retail Packaging Netokaal plastik1kg Packs in Box: 1EAN Code: 426045564361
Housing type: Midi Tower ATX Motherboard format acceptable: m-ATX, ATX, Extended ATX, mini ITX 5.25 "bays (external) - 3.5 "bays (internal) 3 pcs 2.5 "bays (internal) 4 pcs The number of expansion slots: 7 +3 pcs. USB socket on the front panel: 1 x USB 3.0, 2 x USB 2.0 Front panel microphone jack: 1 piece. Headphone jack on the front panel: 1 piece. Tool-free assembly: No Height: 487 mm Width: 230 mm Depth: 440 mm Number of fans installed: 5 pcs (2x RGB LED front 20 cm., 1x RGB LED rear 14 cm., 2x top 14 cm) Number of places for additional fans: 0 Maximum length of graphics cards: 370 mm The maximum height of the CPU heat sink: 180 mm Water cooling support: Yes (Front: 360mm; Rear: 120mm) Housing color: Black and silver More information: Dust filter x 3 Tempered glass on the side of the housing LED backlight. Removable side panel 90 degree inverted HD cage Bottom mounted power supply. Cable arrangement system Kit contents: Remote control to control the backlight, screws, cable ties.
