With the Lian Li O11 Dynamic Mini V2, you can make your gaming setup stand out: Despite its compact design, this mini case offers a spacious interior with enough room to bring your vision to life. Whether you prefer air cooling, water cooling with an AiO, or vertical installation of your graphics card—this case allows all that and much more. Compact design: Takes up less space on your desk Room for high-end hardware: Generously designed interior enables the installation of powerful components Clean cable management: Cable brackets and support for motherboards with back-connect design keep cables neat Includes GPU brackets: Graphics card can be installed vertically or horizontally Protection from dust: Easy-to-clean dust filters at multiple spots The Lian Li O11 Dynamic Mini V2: A mini case designed for high-performance gaming hardware Lian Li O11D Mini V2 with example hardware Equipped with tempered glass on the side and front, the Lian Li O11 Dynamic Mini V2 lets you showcase your hardware. Thanks to its compact size, it can be easily placed on your desk, becoming the centerpiece of your gaming setup—all without messy cables inside the case. Clean cable management for a tidy look Lian Li O11D Mini V2 in white with cable straps Thanks to multiple cable brackets, the case allows for neat routing of your cables. A built-in bracket for the heavy 24-pin ATX cable keeps it neatly in place, while cleverly positioned straps keep all other cables together. You can even use the drive cages to hide your cables. Managing cables is easy—whether you’re building your first gaming PC as a beginner or you’re a pro who’s tired of endless cable routing. Flexible installation for motherboards and AiO water coolers With a vertically adjustable motherboard standoff, you have more flexibility when installing the motherboard and AiO water coolers. You can choose between two motherboard positions: The upper position supports 240 mm and 360 mm AiO water coolers, while the lower position also allows for a 280 mm radiator. Well cooled, even under full load Supports up to nine fans Room for two water cooling radiators Mesh panel on top Dust filter at the bottom The fans and radiators ensure sufficient cooling for your gaming hardware, even at full load. A mesh panel and a dust filter help prevent dust buildup inside your case, thus prolonging the lifespan of your hardware. Ready for top performance with space for large GPUs The case interior is designed so that even large graphics cards up to 400 mm fit in easily—whether installed horizontally or vertically. Included GPU brackets ensure secure mounting in both scenarios. This lets you choose how to install your graphics card. Supports Mini-ITX, mATX, and ATX motherboards—including models with back-connect cable management. Combined with clever cable brackets and Velcro straps, this ensures a tidy, clean look: All connections disappear elegantly behind your motherboard. Modular I/O panel Lian Li O11D Mini V2 I/O Panel The I/O panel module can be attached either on top or at the front bottom. This means you can position the case however you like and still easily access the button and ports. If you place the panel on top, the bottom cover can also be removed, improving airflow.
Tootekood: D32 PRO BLACKGTIN: 6970620554327Korpused
With the D32 series, Jonsbo targets everyone who wants to build their PC in a space-saving way. Unlike the D32 STD, the D32 PRO PC case is aimed at the high-end segment with special and practical features such as Back-Connect or improved front I/O. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for Back-Connect motherboards Tempered glass side panel ensures a subtle appearance Plenty of room for cooling solutions allows installation of high-performance hardware Three dust filters protect your hardware from annoying dust particles The Jonsbo D32 PRO Black: Space-saving and subtle case for high-end hardware Whether you’re building a midrange HTPC or a high-end PC – the D32 PRO Black from Jonsbo comfortably accommodates all kinds of builds. This minimal case fits graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height. In Back-Connect mode, the maximum CPU cooler height is reduced by around seven millimeters. This ensures that, even with the case’s compact design, your hardware gets adequate cooling. Working together with up to six 120 mm fans or one 120 mm fan and four 140 mm fans, the fans ensure enormous airflow inside the case. No cable clutter with Back-Connect With Back-Connect motherboards like ASUS’s BTF series, MSI’s PROJECT ZERO series, or GIGABYTE’s Stealth series, the case in B-mode—with about six to seven millimeters more space—remains almost completely free of visible cable clutter. Since most power and connection cables can be connected at the back of the motherboard, you save time on cable management and still have a clean look inside your case. Combined with the tempered glass side window, your hardware is always on display in an especially appealing way. Powerful cooling in a small space To ensure your powerful hardware stays adequately cooled in this compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for plenty of airflow, a large dual-tower CPU cooler, or even an installable 240 mm AiO, your hardware always stays cool, even under load. Three dust filters on the front, top, and bottom make sure your hardware stays free from dust and dirt. This keeps your temperatures at optimal levels and, among other things, helps extend your hardware’s lifespan.
Darkflash DS900WD computer case (black) + 4 fansDarkflash DS900WD is a modern solution for demanding users who value both aesthetics and functionality. The distinctive design with a panoramic design without an A-pillar, equipped with a single transparent glass wall and a wooden front, not only looks impressive, but also provides excellent visibility of components. The case is designed to provide optimal cooling, performance and versatility, while offering ease of modification and expansion of computer systems. The kit includes 4 fans.Durability and aestheticsThe Darkflash DS900WD stands out for more than just its looks. It is an enclosure built with durability in mind. The support mechanism and solid construction ensure stability and security for all computer components, which is especially important when expanding the system.Effective coolingEvery computer needs a good cooling system, and the DS900WD provides it without question. The ability to mount up to 10 120 mm fans and a large 360 mm heatsink makes the case ideal for those who expect high performance and reliability, especially during intensive use. In addition, 4 high-performance fans are included, which blend perfectly with the interior of the case.Protection and ease of useThe case is designed to protect the computer's interior from dust, which is important for maintaining cleanliness and performance. In addition, its clever design makes it easy to upgrade and expand components, which is especially useful for users who want to build exactly the system they want.Compatibility and expansionThe Darkflash DS900WD is compatible with a wide range of motherboards, including ATX, M-ATX and ITX, giving users freedom of choice and flexibility in configuring their systems. Additionally, seven PCI slots allow for further expansion and customization of the chassis. ManufacturerDarkflashModelDS900Enclosure typeMidi TowerSide panelTempered glassMotherboard standardATX, M-ATX, ITXPower supply standardATX at the bottomSlots for internal drives3.5" HDD x2, 2.5" SSD x2Expansion card slots7Max PSU length250 mmMax length of graphics card425 mmMax height of CPU cooler170 mmMax number of fans10 (120 mm) or 2 (140 mm)Fan mounting optionsTop: 120 mm fan x3 or 140 mm fan x2; Rear: 120 mm fan x1; Side: 120 mm fan x3; Bottom: 120 mm x3Water cooling mounting optionsTop: 240 / 360 mm; Side: 240 mmNumber of fans installed4Type of installed fansARGBButtons and controlsPower, Reset, LEDConnectorsUSB 3.0 x1, USB2.0 x2, HD AudioMaterialTempered glass, 0.5 mm SPCC, woodColorblackHeight454 mmWidth218 mmDepth434 mmWeight6.53 kg
ASUS 90DC00M0-B39040. Type: PC, Produktfarve: Sort, Understøttet motherboard, formfaktorer: ATX. Frontventiler installeret: 2x 160 mm, Understøttede diametre for frontventilatorer: 140,160 mm, Bagerste ventilatorer installeret: 1x 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 225 mm, Dybde: 412 mm, Højde: 503 mm
Darkflash DB330M Mesh computer case (black)Darkflash DB330M Mesh is a computer case designed for M-ATX and ITX standard motherboards. Its dimensions (368 × 218 × 400 mm) allow the construction of a compact set-up with a graphics card up to 305 mm long and CPU cooling up to 180 mm high. The design is based on a 0.5 mm SPCC steel frame and features a tempered glass panel and mesh front for efficient air or liquid cooling.Efficient air coolingThe Darkflash DB330M Mesh case supports up to 7 fans: 2 at the front, 2 at the bottom, 2 at the top and one at the rear. The top part of the design allows for the installation of fans in 120 or 140 mm sizes, while the remaining locations are provided for 120 mm fans only. This arrangement allows for the creation of a vertical cooling channel that promotes natural air circulation and efficiently dissipates heat from components.240 mm liquid coolingThe Darkflash DB330M Mesh allows you to mount a water cooler of up to 240 mm in the top. This allows you to install a high-performance AIO system without sacrificing other components. The maximum height of the air cooler is 180 mm.Mesh panel with filterThe front panel of the case is made of mesh, which improves airflow and also acts as a dust filter. Additional vents are also located on the top and bottom of the design.Space for longer GPUsA graphics card up to 305 mm in length can be mounted inside. The chassis offers 4 PCI slots, making it possible to mount two- and three-slot cards. The power supply compartment and cable space do not limit the length of the GPU.Glass side panelThe left panel is made of tempered glass to expose the computer's interior and components with RGB backlighting. The panel can be easily removed without tools.Separate space for cables and multiple portsThe back of the case features a contoured space and pass-through holes for orderly cable routing. This layout makes it easier to install components and improves airflow in the main compartment. The front panel features a USB 3.0 port, 2 USB 2.0 ports, one HD Audio port and a power button. This allows you to enjoy quick access to basic functions without having to reach the back of the case.ATX power supply compatibility and board supportThe bottom of the case has room for a standard ATX power supply. This makes it possible to mount full-power units without the space constraints typical of smaller enclosures. In addition, the Darkflash DB330M Mesh supports M-ATX and ITX motherboards, offering optimal conditions for building a home, office or gaming PC. The lack of pre-installed fans allows for individual selection of cooling components. ManufacturerDarkflashModelDB330M Mesh BlackHousing typeMidi TowerSide panelTempered glassMotherboard standardM-ATX, ITXPower supply standardAt the bottomSlots for internal drives3.5" HDD x2, 2.5" SSD x1Expansion card slots4Max PSU length210 mmMax length of graphics card305 mmMax height of CPU cooler180 mmMax number of fans7Fan mounting optionsTop: 120 mm x2 / 140 mm x2; Bottom: 120 mm x2; Front: 120 mm x2; Rear: 120 mm x1Water cooling mounting optionsTop: 240 mmNumber of fans installedNo fans installedType of fansNo fans installedButtons and controlsPowerConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorBlackHeight400 mmWidth218 mmDepth368 mmWeight3.8 kg
Professional gaming PC case NOCTIS FLOW RGB X1 NOCTIS FLOW RGB X1 a case designed for maximum airflow During intense gameplay, temperature has a real impact on stability, FPS (Frames Per Second), and the overall performance of your computer.The mesh front panel (dense, breathable mesh) on the NOCTIS FLOW RGB X1 increases airflow, keeping components cool even under heavy load. Four RGB fans included full 4-pin PWM control The set includes four 120 mm RGB (Red Green Blue) fans they not only look modern but are highly functional.Thanks to 4-pin PWM (automatic speed control), the system increases fan speed exactly when your processor or graphics card starts working harder. Enhanced AIO cooling system installation wide compatibility In the NOCTIS FLOW RGB X1 you have complete freedom to install AIO (All in One) water cooling: on the top, front, rear, and most importantly in the dedicated side area next to the motherboard.This allows you to create a setup that best suits your graphics card, processor, and gaming style. NOCTIS FLOW RGB X1 offers extended radiator installation options, including space next to the motherboard. Supported configurations: top: 120 / 240 mm, front: 120 / 240 / 280 / 360 mm, next to the motherboard: 120 / 240 mm, rear: 120 mm. This flexible solution lets you tailor the cooling layout to your specific hardware configuration. Compatibility with large components no upgrade limitations The case supports CPU coolers up to 170 mm, graphics cards up to 350 mm, and power supplies up to 180 mm (or 230 mm after removing the HDD cage).This means you can choose exactly the GPU and cooling system that deliver top performance without worrying if everything will fit. Optimized airflow layout up to 10 fans NOCTIS FLOW RGB X1 lets you configure cooling to match your play style: maximum airflow, maximum silence, perfectly balanced. With 10 potential fan mounting spots, you get full control over your system temperatures. Available positions: 3 × front, 2 × top, 1 × rear, 2 × next to the motherboard, 2 × in the PSU chamber. This layout makes it easy to achieve the optimal balance between cooling and acoustics. Compatibility with ATX / mATX / Mini-ITX motherboards The case supports three popular motherboard standards: ATX (Advanced Technology eXtended) full-size, most expandable, mATX (Micro ATX) compact but still functional, Mini-ITX the smallest, ideal for mini gaming setups. Flexible drive system configuration tailored to the user Customize your storage setup to match your game library and workflow: more SSDs faster loading and system responsiveness, more HDDs more space for projects, recordings, or streamer archives. The choice is yours the case supports both options. NOCTIS FLOW RGB allows mounting: 2 × HDD 3.5 + 2 × SSD 2.5or 1 × HDD 3.5 + 3 × SSD 2.5. A practical solution for expanding storage space for games, video materials, or fast system drives. Case protected with filters and designed for clean airflow The case maintains high airflow while protecting components with two dust filters (top + bottom), helping extend component longevity. The mesh front panel is complemented by additional dust filters: top, PSU chamber. As a result, the inside of the PC stays clean and components remain stable over time. Ergonomic I/O panel quick access to essential ports The top panel includes: USB-A 3.1 Gen 1 (Universal Serial Bus Type A, 3.1 Gen 1 standard) 2 × USB-A 2.0 HD Audio (High Definition Audio) The ports are easily accessible, making it convenient to connect flash drives, accessories, or headphones without reaching behind the PC. NOCTIS FLOW RGB X1 a case for users who need efficient cooling and full functionality A solid, well-designed structure with high airflow, broad compatibility, and a modern ventilation layout.An ideal choice for gaming PCs, streaming setups, and powerful workstations.
HYTE Y70 Milk. Formfaktor: Midi Tower, Type: PC, Produktfarve: Lyserød. Placering af strømforsyning: Bund. Understøttede diametre for sideventilatorer: 120,140 mm, Understøttede diametre for bagerste ventilatorer: 120,140 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 320 mm, Dybde: 470 mm, Højde: 470 mm
Limited hololive edition, panorama glass with Suisei design, vertical GPU with PCIe 4.0 riser, powerful cooling, dual-chamber construction The HYTE Y70 Suisei Edition is a limited showcase case for fans of hololive V-Tuber Suisei and discerning PC enthusiasts. It combines the renowned Y70 design with exclusive Suisei graphics, high-quality materials, and maximum hardware compatibility. Limited Suisei Edition featuring Hoshimachi Suisei design and collector’s value Three-piece panoramic glass wonderfully displays hardware and graphics cards Vertical GPU mounting with PCIe 4.0 riser for a clean look and optimal presentation Dual-chamber interior separates hardware and cables for improved airflow Extensive cooling options for both air and water cooling, suitable even for high-end systems Limited design for hololive fans The Suisei Edition brings detailed character graphics and an elegant midnight blue design to the Y70 case. Gold accents and lettering highlight the nocturnal aesthetic. The panoramic glass makes the case a centerpiece of any desk or setup. Plenty of space for powerful hardware The Y70 supports motherboards up to E-ATX and can accommodate graphics cards up to 422 mm in length. With 4-slot GPU support, there is also room for especially large graphics cards. CPU coolers up to 180 mm and power supplies up to 235 mm fit easily inside the case. Strong cooling and thoughtful design Up to ten fans or multiple 360 mm radiators ensure efficient cooling. The dual-chamber design simplifies cable management and keeps the showcase area neat. Tool-less panels and modular mounts make assembly and maintenance especially convenient.
Build Visibility and Hardware Management, Perfectly BalancedThe dual-chamber design of the FV150 RGB aligns aesthetics with functionality: the glass panels of one chamber are perfect for a clean view of your build while cables, storage and PSU are discreetly hidden in a second chamber. A bottom fan bracket lets you secure fans to the bracket prior to installation, allowing for a completely stress-free setup. GPU and ATX motherboard compatibility offers unlimited flexibility for multiple build configurations.Dual chamber design lets you show off your build while hiding cables, storage drives, and PSU.Supports up to 400mm GPUs and vertical GPU orientation.Supports Mini-ITX, Micro-ATX, ATX motherboards.Engineered bottom fan bracket allows you to attach fans prior to installation.
Float in Form. Flow in Function.The CFV235 is a new kind of PC case featuring the innovative Central Floating Ventilation (CFV) structure. This divides the PSU cabin and main chamber, retooling the open space in between as a cooling advantage by accessing extra ventilation. An optimal combination of a full panoramic view, compact footprint and architecturally-enhanced cooling, the CFV235 empowers airflow beyond ordinary dimensions.Central Floating Ventilation free-floating separation provides a unique visual identity.True floating void adds an extra dimension of airflow across 270° of access.The Aurora RGB lighting strip brings the awe and glory of RGB lighting to the free-floating space.COUGAR Unity 240 single-frame PWM reverse-blade fans are preinstalled on the motherboard side.Accommodates a maximum GPU length of 430mm.Compatible with Reverse Connector / Mini ITX / Micro ATX / ATX / CEB motherboards.USB 3.2 Gen 2×2 Type-C (20 Gbps) x1, USB 3.0 Type-A x 2, 4 pole headset audio jack for versatile device connectivity.Houses 2 x 3.5” HDD drives and 2+2 2.5” SSD drives (converted from 3.5” drive bays)
Das Elite 690 verfügt über zwei gehärtete Glasscheiben, die Ihr System in Szene setzen, während eine holzstrukturierte Front und ein Mesh-Einlass Wärme mit effizientem Luftstrom verbinden. Dank der oberen und unteren Belüftung für vertikale Kühlung unterstützt es vielseitige Lüfter- und Kühlerkonfigurationen – perfekt für leistungsorientierte oder stilvolle Systeme. Die vertikale Anordnung trennt die Wärmezonen für eine bessere Luftzirkulation und eine sauberere Kabelführung. Bis zu 10 Lüfter in einer von unten nach oben verlaufenden Anordnung maximieren den Luftstrom und die Kühlung. Die aus echtem Holz gefertigte Frontplatte verleiht jedem Raum eine warme, organische Note. Das Gehäuse enthält 3 in Reihe schaltbare ARGB-Lüfter mit vollständiger Unterstützung für die Beleuchtungssynchronisierung des Motherboards. Das Elite 690 verfügt über einen USB 3.2 Gen 2x2 Typ-C und zwei USB 3.0-Anschlüsse für blitzschnelle Konnektivität.
The Viewport Mini, in its elegant black version, is a mini-tower case featuring front and side panels made of tempered glass, providing a panoramic view of the high-performance interior components. It supports Micro ATX and Mini-ITX motherboards and offers advanced cooling options with 7 fan slots and liquid cooling compatibility for 240/280 mm and 120 mm radiators. The included ARGB fans draw air in through mesh ventilation to optimize airflow. Ideally suited for gaming and high-performance applications, it accommodates GPUs up to 355 mm and CPU coolers up to 165 mm.
The STAGE MIRROR is more than just a PC case—it is a stage for your personal expression. With its distinctive, forward-facing mirrored platform, the STAGE MIRROR is designed for creatives, collectors, and enthusiasts who value both performance and individual style. This unique design transforms your system into a personal gallery, putting story and style at the forefront. To deliver exceptional thermal performance, the case supports fan sizes from 120 mm up to 200 mm and can accommodate up to twelve 120 mm fans—six on top and six on the bottom. It also supports radiators up to 360 mm, meeting the cooling requirements of high-end, custom liquid cooling setups. The case is compatible with Mini-ITX, Micro-ATX, and ATX motherboards, including BTF layouts (Back-Connect) within the ATX form factor. It includes a high-quality PCIe 5.0 riser cable, enabling vertical GPU installation and offering both next-generation performance and enhanced presentation right out of the box. The Stage Mirror supports GPUs up to 430 mm long and power supplies up to 210 mm long, making it suitable for flagship components with no compromises. With USB 4.0 Gen 2x2 Type C (up to 20 G) and 2x USB 3.2 Gen 1 Type A ports (up to 5 G), you get ultra-fast data transfer and future-proof accessibility.
The IPC SC-4100 is a case for Mini ITX Mainboards with a quadruple Hot-Swap rack for hard drives.One included 80mm fan, as well as an optional 40mm fan, cares for clean air and therefore for an impeccable cooling system.One Flex ATX or 1HU server power supply can be mounted. The slot opening is suitable for the mounting of a short flat graphic card. One 2.5" hard drive or one SSD can also be mounted. One lockable door completes this total package.KujutegurPüstikTüüpServerMaterjalTeras3,5" lahtrite arv4Emaplaadi toetatud kujuteguridMini-ITXToote värvMustAknagaEiPüstikmontaaž1UMaterjali paksus1 mmSisseehitatud kõlar(id)EiKaasas toiteplokkEiUSB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendEiAudioväljundEiMaksimaalne esiventilaatorite arv1Toetatud esiventilaatorite läbimõõt40 mmInstallitud tagaventilaatorid1x 80 mmMaksimaalne tagaventilaatorite arv1Toetatud tagaventilaatorite läbimõõt80 mmToetatud kõvakettasuurused2.5,3.5"KäigultvahetusJahLED-indikaatoridJahLähtestusnuppJahLaius194 mmSügavus200 mmKõrgus270 mmKaal2,66 kgPakendi laius315 mmPakendi sügavus245 mmPakendi kõrgus237 mmPakendi kaal3,08 kgKogus aluse kohta4 tk
No. of drive bays: 6 Dimensions: 455 x 205 x 475 mm Weight: 5.27 Other features: - Side panel with window YES- Filter under the YES power supply- Filter on the upper panel YES- Filter on the front panel YES- Steel thickness: 0.7 mm- Space for PSU: 240 mm- Rubber flanges for cable entry holes- All herrings twisted in place of the broken ones- The radiator can not be installed on the front panel
Internal 4x 2.5 "/ 3.5" (cross, drive rails), 6x 2.5 "or 3x 3.5", Front I / O 2x USB-A 3.0, 2x USB-A 2.0, 1x microphone, 1x headphones, PCI slots 10 (2x riser card), Fan (front) 2x 140mm, 1400rpm (blue illuminated) or 3x 120mm (optional), Fan (rear) 1x 140mm, 1400rpm (blue illuminated), Fan (top) 3x 140mm (optional), Fan (below) 2x 120mm (optional), Motherboard up to E-ATX, Power supply ATX, Power supply position below, CPU cooler up to max. 190mm height, Graphic cards up to max. 310mm (410mm without HDD cage), Color white, inside white Dimensions (WxHxD) 274x592x577mm, Volume 93.59l, Weight 18.90kg, Special features Cable management, dust filter, glass viewing window, CA-1I7-00F6WN-00
Form factor: mATX, Dimension (DxWxH): 425mm x 180mm x 352mm (Stand +3mm), Weight: 4, 5 kg w/o psu, Drive Bays ext.: 2x 5, 25" / 1x 3, 5", Drive Bays int.: 2x 3, 5" / 1x 2, 5", Power Supply: 350Watt (GPB-350S), Front I/O: 2x USB3.0 (USB3.1 Gen 1), 2x USB 2.0, Mic-in, Audio-out (AZALIA / HD-Audio), Scope of delivery: Set of screws, Material: SECC, 0, 5mm, Cooling (opt.): 1x 80mm or 90mm or 120mm on the front, 1x 80mm or 90mm or 120mm on the rear, CPU cooler height (max.): 140mm, VGA card lenght (max.): 340mm, CT-04B-OP
Cabinet Form Factor: Midi Torn Mainboard Form Factor1Supported Mainboard Form Factor: ATXMicro ATX 3.5-inch Internal Drivesahtleid1(3.5-mm minijack) Headphones: 1(3.5-mm minijack) External värv: must Package Type1kg Pack kaal Netto (kg): 2.8 kg Pieces in pack1Box kaal Brutto (kg): 3.61kg Retail Packaging Netokaal Carton: 0.5 kg Retail Packaging Netokaal plastik1kg Packs in Box: 1EAN Code: 426045564361
